Hardware for Sliding Doors (Timber) - Spinea Oy · Hardware for Sliding Doors (Timber) Catalogue: TEH_02H. 2 TEH_02H/02.2014 Hardware for Sliding Doors (Timber) Contents HELM 50 General

Hardware for Sliding Doors (Timber)

Catalogue: TEH_02H

2TEH_02H/02.2014

2

Hardware for Sliding Doors (Timber)Contents

HELM 50

General Information Page 18

HELM 50 up to 40 kg leaf weight Page 20

Appendix

Technical Specifications Page 72

Sample of Request for Proposal Page 74

Enquiry Form Page 75

Accessories

Flush and Pull Handles Page 68

HELM 53



Information

Introduction Page 3

HELM Hardware for Timber Sliding Doors Page 4

HELM Accessories Page 8

HELM 73



HELM 120



HELM 150



HELM Modular.Concept 80


HELM Hardware Modules Page 12

HELM 85



Gen

eral

Info

rmat

ion

TEH_02H/02.20143

Hardware for Sliding Doors (Timber)General Information

Introduction

The HELM range comprises all hardware solutions from lightweight sliding doors to leaf weights of 170 kg. The hardware is primarily used for timber leaves, it can, however, also be employed for sliding leaves of metal or plastic. For the use of all glass doors we refer to the respective separate catalogue.

The hardware excels at precise rolls, simple mounting and high-quality workmanship. The HELM hardware is, of course, tested according to DIN 1527:1998.

For the medium and most common range of applications (sliding doors of 30-80 kg) the Modular.Concept 80 has been developed (pages 10-17). By means of only one track system and various accessory modules all applications can be covered in a simple manner. The hardware HELM 120 and HELM 150 (from page 50) make the range perfect in the upper weight classes and can also be used outdoors as all components are made of non-corroding materials.

On the pages 4-7 you will find an overview of all hardware and fields of application.

4TEH_02H/02.2014

4

Hardware for Sliding Doors (Timber)Overview Hardware

Har

dw

are

Ove

rvie

w

TEH_02H/02.20145

HELM 50 HELM 53 HELM 73 HELM 85 HELM 120/120 B HELM 150/150 B

Leaf weight 40 kg 50 kg 80 kg 90 kg 120 kg 170 kg

Mounting Type:

ceiling mounting ● ● ● ● ● ●wall mounting ● ● ● ● ● ●Directwall mounting1 ○ ● ● ● ○ ○

Field of Application:

residential ● ● ● ● ● ●commercial ○ ○ ● ● ● ●Type of Door:

single leaf and multiple leaf

● ● ● ● ● ●

synchronised ○ ○ ● ● ● ●telescopic ○ ○ ● ○ ● ●damper and soft closing device types:

damper and soft closing device

○ ○ ● ○ ○ ○

door catcher ● ● ● ● ● ●Track Surface:

natural finish ● ● ● ○ ○ ○silver anodised ○ ● ● ● ● ●stainless steel finish anodised

○ ● ● ○ ○ ○

Pelmetting

pelmet ○ ● ● ●2 ● ●

● = yes ○= no 1track drilled on the side 2pelmet integrated in the track system

Overview


6TEH_02H/02.2014

6

Further information from page 24

HELM 53 up to 50 kg leaf weight

Trackaluminium natural finish, silver anodised or stainless steel finishanodised, with drilled holes for ceiling mounting in stock lengths of6000 mm or cut to size

Trolley double pair, with plain bearings

Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting wall mounting• clip-on pelmet


Trackaluminium natural finish, with drilled holes for ceiling mountingin stock lengths of 6000 mm or cut to size


Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting wall mounting



Trackaluminium natural finish, silver anodised or stainless steel finishanodised, with drilled holes for ceiling mounting in stock lengths of6000 mm or cut to size

Trolley double pair, with ball bearings

Realisable options• single and multiple leaf constructions• low headroom installation• mounting options: ceiling mounting and wall mounting• clip-on pelmet• SmartStop• telescopic fitting• synchronised opening



tested according to DIN 1527: 1998100,000 cycles



use ofSmartStop

possible

Har

dw

are

Ove

rvie

w

TEH_02H/02.20147


Trackaluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting


Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet• telescopic fitting• synchronised opening


Trackaluminium silver anodised, with drilled holes for wall orceiling mounting in stock lengths of 6000 mm or cut to size

Special featureenclosed track system: consisting of track, pelmet, end caps and plastic strip

Trolley double roller, with ball bearings

Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• synchronised opening




Trackaluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting








Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.


8TEH_02H/02.2014

Clip-on pelmet for HELM 53 and HELM 73

Clip-on aluminium pelmetting ensures an attractive look wherever HELM hardware is used. In case of the types silver anodised and stainless steel finish anodised the pelmets are simply clipped on the outer face of the profile.

Product advantages• simple mounting• pelmetting on one or both sides possible


SmartStop for HELM 73

We put an end to sliding leaves that close noisily and bounce back. Thanks to our SmartStop for the use on one or both sides we stop each door and pull it noiselessly into the final position.

This piece of hardware makes sure that closed leaves remain closed.

Product advantages• door is slowed down towards the stop positions and pulled into the final position. • gentle, quiet and comfortable closing• slowing down can be effected on one or both sides• mounting in the track profile• employed air cylinder is maintenance-free• door is held in the stop positions, thus an additional door catcher is not required


Hardware for Sliding Doors (Timber)Accessories

HELMatic for HELM 73, HELM 120 and HELM 150

HELMatic moves doorsThe new generation of drives for HELM 73, HELM 120 and HELM 150

With the HELMatic 230-volt drive sliding doors and light sliding gates up to 150 kg door weight can be opened and closed fully automatically. With wireless push-button, motion detector as well as comfortable push&go function, every sliding door can be operated without effort using the HELMatic. In case of power failure the door can be pushed open manually.

The HELMatic was rated with the test result "good" in the user text of the "Deutsche Gesellschaft für Gerontotechnik® (GGT)" (German service company for gerontological technology) and is certified according to DIN EN 186520-2 - low energy operation.

HELMatic 230 volt drive

Motion detector

Acc

esso

ries

9TEH_02H/02.2014

HELM projection track for pelmetting

The projection track for pelmetting has to be combined with the track for ceiling mounting. Distances as frames or baseboards can be easily leveled. Easy assembly with enclosed screws.

Product advantages• complete system including pelmet in same appearance• easy installation


HELM spacer profile

The spacer profile is used to extend distances to the wall when there are frames or baseboards. Wooden substructions are no longer required. This simplifies the installation and makes a more attactive look.

Product advantages• no substructions necessary• easy installation


Pull handles and flush handles

You will find the suitable pull models for timber sliding doors on the pages 68 - 71 as well as in the KWS catalogues.


Hardware for Sliding Doors (Timber)Accessories

10TEH_02H/02.2014

HELM Modular.Concept 80up to 80 kg leaf weight

HEL

M M

od

ula

r.Co

nce

pt

80

11TEH_02H/02.2014


Sliding doors of timber can be used in a wide range of contexts in both living and working environments.

As well as their traditional application as normal doors for rooms, they are increasingly being used as room dividers. Regardless of whether they are used to separate kitchen areas, walk-in wardrobes or as part of office partitions, the possibilities are numerous, and therefore the range of corresponding fitting systems are so versatile.

For this reason HELM has developed the compact yet flexible Modular.Concept 80. The use of just one track system with a range of accessory modules enables us to respond to different individual requirements.

From simple single timber doors up to the double door systems with panels of glass weighing 80 kg and synchronised opening a wide range of applications can be delivered quickly and easily.

The Modular.Concept 80 is based on our tried and tested HELM 53 and HELM 73 fittings which have been continuously developed over many years and which now have been improved by the addition of some important components (SmartStop, pelmets, synchronised operation, stainless steel finish etc.).

The following list shows all available modules. Depending on the relevant application and requirements, fittings systems for timber and glass doors can be compiled from this selection.

- multiple applications for timber doors, single or double door, wall, ceiling and wall pocket assembly, pelmets, projection tracks, HELM SmartStop, low headroom installation and synchronised opening and closing

- modular structure: simple price calculation, quick delivery times, compact range of stock and at the same time a wide range of different applications

- additional accessories can be easily added later

- wide range of KWS flush and pull handles

The idea

The advantages

12TEH_02H/02.2014


Part no.aluminium natural finish

Part no.aluminium silver anodised

Part no.stainless steel finish anodised

for door widths of 500-700 mmtrack lenght 1300 mm

006031 006061 006036


006032 006062 006037


006033 006063 006038


006034 006064 006039


006035 006065 006040

stock lenght 6000 mm 006050 006051 006054

Part no.aluminium natural finish



00604601 00604701


00604602 00604702


00604603 00604703


00604604 00604704


00604605 00604705

stock lenght 6000 mm 00604600 00604700


2 end caps 006003

HELM track no. 60 - for wall mounting with lateral drilled holes

HELM end caps - usable with HELM track no. 60

HELM track no. 60 - für ceiling mounting and for receiving the wall mounting bracket with drilled holes

These tracks are used in case of wall mounting in combination with the clip-on pelmet.

HEL

M M

od

ula

r.Co

nce

pt

80

13TEH_02H/02.2014


HELM accessories: wall mounting brackets, pocket door kids and projection tracks

Description Part no.

1 (no.) wall mounting bracket 61/01 006161

4 (nos.) wall mounting bracket 61/01 1300 mm 006163






1 kit contains:x universal mounting brackets(please specify according to your track length)1 bottom guide no. 70,1 latch screw

4 universal mounting brackets no. 73 for 1300 mm 006173






1 projection track, 1300 mm long for door widths of 500-700 mm

00601660

1 projection track, 1700 mm longfor door widths of 710-900 mm

00601760


00602160


00602560

2 end caps for projection track 006001

1 projection track, 6000 mm stock length 00601060

1 projection track, cut to length, per metre 00601160


1 projection track, 1300 mm long for door widths of 500-700 mm

00602760


00602860


00602960


00603060

2 end caps for projection track 006002


1 projection track, cut to length, per metre 00601560

HELM wall mounting bracket sets

This kit is for use in conjunction with the HELM 73 soffit fix track

Track in timber or glass door applications

HELM kits for pocket door installation

Aluminium (silver anodised)

Supplied complete with screws and washers

Inter lengths and lengths from 2500 mm are avai -lable as dimension lengths (Part no. 00601560)

The projection track is installed with the soffit fix track no. 60 silver anodised

HELM projection track

Aluminium (stainless steel finish ano-dised)

Supplied complete with screws and washers

Interlengths and lengths from 2500 mm are available as dimension lengths (Part no. 00601560)

The projection track is installed with the soffit fix track no. 60stainless steel finish anodised


14TEH_02H/02.2014


2 end caps silver anodised, timber pelmets (51 x 76 x 2,5 mm)

006352

2 end caps, stainless steel finish anodisedtimber pelmets (51 x 76 x 2,5 mm)

006332


2 end caps silver anodised, timber pelmets (66 x 76 x 2,5 mm)

006353

2 end caps, stainless steel finish anodisedtimber pelmets (66 x 76 x 2,5 mm)

006333



1 projection track, cut length per metre 0063599

1 screw connection kit includes:18 U adhesive discs M518 U hexagonal nuts M518 hexagonal socket head screws M5 x 10 mm

006351





006351


1 spacer profile, 6000 mm stock length, silver anodised

006370

1 spacer profile, cut length per metresilver anodised

0063799

1 spacer profile, 6000 mm stock length, stainless steel finish anodised

006390

1 spacer profile, cut length per metre stainless steel finish anodised

0063999

HELM mounting parts: wall mounting bracket sets, complementary sets for pocket door installation and projection tracks


2 end caps silver anodised, timber pelmets (56,5 x 65 x 2,5 mm)

006372

2 end caps, stainless steel finish anodisedtimber pelmets (56,5 x 65 x 2,5 mm)

006373


2 end caps silver anodised, glas pelmets (72 x 91,5 x 2,5 mm)

006374

2 end caps, stainless steel finish anodisedglas pelmets (72 x 91,5 x 2,5 mm)

006375


for timber pelmets

in connection with spacer profile

for timber pelmets

HELM end cap for projection track


aluminium silver anodised

The projection track is used in combination with track no. 60 with holes for ceiling mounting.

aluminium stainless steel finish anodised




aluminium

The spacer profile is used in combination with track no. 60 with holes on the side for wall mounting.

HELM spacer profile

for timber pelmets

for clip on pelmet

in connection with HELM 73 synchronised (please see instal-lation drawing on page 43)

HELM end cap for spacer profile

HELM end cap for spacer profile double sided

HEL

M M

od

ula

r.Co

nce

pt

80

15TEH_02H/02.2014

HELM Modul.Konzept 80up to 80 kg leaf weight

HELM 53

HELM 73

HELM 73 ME

HELM 73 Synchron

for single leaf timber sliding doors up to 50 kg leaf weight and door thickness from 20 mm

trolleys with plain bearings

for single leaf timber sliding doors up to 80 kg leaf weight and door thickness from 20 mm

trolleys with ball bearings

for single leaf timber sliding doors with low headroom installation up to 80 kg leaf weight and door thickness from 30 mm


for double timber sliding doors synchronised up to 80 kg leaf weight and door thickness from 20 mm with tooth belt deflection


Accessories for timber door applications

More accessories from page 16

use ofSmartStop

possible

use ofSmartStop

possible

use ofSmartStop

possible

tested according to DIN 1527:1998 200.000 cycles





2 trolleys no. 53 with flange2 door catchers no. 65 P1 bottom guide no. 214

In case of double doors2 sets are necessary.

005361


2 trolleys no. 73 with flange2 door catchers no. 65 P1 bottom guide no. 214


007361


2 trolleys no. 732 flanges no. 73 V2 door catchers no. 65 P1 bottom guide no. 216


007362


4 trolleys no. 73 with flange4 door catchers no. 65 P2 bottom guide no. 2142 deflection rollers1 tooth belt connector timber1 tooth belt clamp timber

007380

1 tooth belt (not includedin the kit) per metercalculation: tooth belt length =2 x track length + 120 mm

000110017001

65

40

2,5

16TEH_02H/02.2014

Aluminium (silver anodised)

The pelmet is installed on single side in side mounted or on both sides in soffit mounted installations. Matching end caps availab-le to suit application.

For wall mounting we re-commend track and spacer profile no. 60 pre-drilled for side fixing. (Wall mounting brackets are not required)

Clip-on pelmet Description Part no.1 clip-on pelmet, 1300 mmfor door widths of 500-700 mmsilver anodised

00606701

1 clip-on pelmet, 1700 mmfor door widths of 710-900 mmsilver anodised

00606702


00606703


00606704

1 clip-on pelmet,stock length silver anodised 006066

1 clip-on pelmet,cut length silver anodised 006067

2 end caps for the one-sided pelmet 65 x 40 mm silver anodised 006072

2 end caps for the two-sided pelmet 65 x 53 mm silver anodised 006073

HELM modification set

Part no.

2 flanges no. 73 V1 bottom guide no. 216

In case of double doors2 sets are necessary.cannot be combined withsynchronised deflection.

007363


SmartStopmit

verwendbar


suitable for the retroactive modification of the standard HELM 73 timber sets.

HELM modification set 73

HELM Modular.Concept 80 Accessories

Door piston

door piston for pocket door installation


1 piece door pistonstainless steel / plastic

006180

Damper and soft closing device suitable for max. door weight 80 kg. Suitable only for use with HELM 73

HELM SmartStop Description Part no.1 SmartStop1 0073501 upgrade-kit for installation on one end of the track contents:1 SmartStop and 2 trolley no. 73 without flange

007351

1 upgrade-kit for installation of both ends of the track contents:2 SmartStop and 2 trolley no. 73 without flange

007352


HELM accessories

91,5

65

40

2,5

HEL

M M

od

ula

r.Co

nce

pt

80

17TEH_02H/02.2014

HELM Modular.Concept 80Accessories

More accessories, flush and pull handles, from page 68

HELM accessories

Aluminium (stainless steel finish anodised)

The pelmet is installed on one side in side mounted or on both sides in soffit mounted installations. Matching end caps availab-le to suit application.

For wall mounting we re-commend track and spacer profile no. 60 pre-drilled for side fixing. (Wall mounting brackets are not required)

Clip-on pelmet Description Part no.1 clip-on pelmet, 1300 mmfor door widths of 500-700 mmstainless steel finish anodised

00606901

1 clip-on pelmet, 1700 mmfor door widths of 710-900 mmstainless steel finish anodised

00606902


00606903


00606904

1 clip-on pelmet,stock length stainless steel finish anodised 006068

1 clip-on pelmet,cut length stainless steel finish anodised 006069

2 end caps for one-sidedpelmetting 65 x 40 mmstainless steel finish anodised

006074

2 end caps for both-sidedpelmetting 65 x 53 mmstainless steel finish anodised

006075

Aluminium silver anodised

in stock lengths of 6000 mm or cut to size

this pelmet can be used with synchronised double doors (please see installati-on drawing on page 43)

Aluminium stainless steel finish anodised


this pelmet can be used with synchronised double doors ( please see installati-on drawing on page 43)

Clip on pelmet Description Part no.

1 clip on pelmet, 1300 mm long 00607701




1 clip on pelmet, 6000 mm long stock length

006076

1 clip on pelmet,cut to length, per metre

006077







006078


006079

18TEH_02H/02.2014

HELM 50up to 40 kg leaf weight

HEL

M 5

0

19TEH_02H/02.2014



HELM 50

up to 40 kg leaf weight

Track aluminium natural finish, with drilled holes for ceiling mountingin stock lengths of 6000 mm or cut to size


Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting wall mounting tested according to

DIN 1527: 1998100,000 cycles

1

5

24 3

20TEH_02H/02.2014


1 track no. 502 trolleys no. 56 with flange2 door catchers no. 50 P1 bottom guide no. 214with x wall mounting brackets

Part no.

1 track no. 50, 1300 mmfor door widths of 500-700 mm5 wall mounting brackets no. 50

005010


005011


005012


005013


005014


005015

Part no.1 track no. 50, 1300 mmfor door widths of 500-700 mm

00501002

1 track no. 50, 1700 mmfor door widths of 710-900 mm

00501102


00501202


00501302


00501402


00501502

1 track no. 502 trolleys no. 56 with flange2 door catchers no. 50 P1 bottom guide no. 214without wall mounting bracket

Hardware kit

HEL

M 5

0

21TEH_02H/02.2014



Part no.

stock length 005050

cut length 005051in stock lengths of 6000 mm or cut to size, for ceiling mounting, aluminium natural finish, drilled approx. every 300 to 350 mm

Part no.

zinc-plated 005060with bolt, zinc-plated

Part no.

plastic 005660

double pair, with flange, support screw zinc-plated

Part no.

zinc-plated 005080catch spring zinc-plated

Part no.

plastic 021461plastic, white

Track no. 50

Wall mounting bracket no. 50

Door catcher no. 50 P

Bottom guide no. 214

Trolley no. 56

1

2

4

5

3

27

63+6

10,5

20

40

8

20

5

24,5

17+6

26,5

19,6

10,5

20

40

8

20

5

24,5

27

28,6

45,6+6

17+6

5

1

3

4

5

2

3

1

4

22TEH_02H/02.2014

HELM 50Technical Specifications

Track no. 50Part no.

natural finishPart no.

silver anodised

Part no. stainless steel

finish anodised

Page

stock length 005050 – – 21

cut length 005051 – – 21

Trolley no. 56 Part no. Page

plastic 005660 21

Door catcher no. 50 P Part no. Page

zinc-plated 005080 21

Bottom guide no. 214 Part no. Page

plastic 021461 21

HELM 50 – Wall mounting, with wall mounting bracket no. 50



silver anodised


finish anodised

Page

stock length 005050 – – 21

cut length 005051 – – 21

Attachments Part no. Page

Wall mounting bracket no 50, zinc-plated 005060 21


plastic 005660 21




plastic 021461 21

1

1

3

2

4

3

5

4

5

HELM 50 – ceiling mounting

HEL

M 5

0

23TEH_02H/02.2014

24TEH_02H/02.2014

HELM 53 and HELM 73

HEL

M 5

3 an

d H

ELM

73

25TEH_02H/02.2014

HELM 53 and 73


HELM 53


Track aluminium natural finish, silver anodised or stainless steel finish anodised, with drilled holes for ceiling and wall mounting in stock lengths of 6000 mm or cut to size


Realisable options• single and multiple leaf constructions• mounting options: ceiling mounting and wall mounting• clip-on pelmet


HELM 73


Track aluminium natural finish, silver anodised or stainless steel finish anodised, with drilled holes for ceiling and wall mounting in stock lengths of 6000 mm or cut to size


Realisable options• single and multiple leaf constructions• low headroom installation• mounting options: ceiling mounting and wall mounting• clip-on pelmet• SmartStop• telescopic fitting• synchronised opening

use ofSmartStop

possible



14 3 2

5

26TEH_02H/02.2014


1 track no. 60, silver anodised2 trolleys no. 53 with flange2 door catchers no. 65 P1 bottom guide no. 214with x wall mounting brackets 61/01

Part no.

1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm4 wall mounting brackets no. 60/01

0053100


0053110


0053120


0053130

Part no.1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm

005310020

1 track no. 60, natural colour, 1700 mmfor door widths of 710-900 mm

005311020


005312020


005313020

1 track no. 60, silver anodised2 trolleys no. 53 with flange2 door catchers no. 65 P1 bottom guide no. 214without wall mounting brackets 61/01

Hardware kit

HEL

M 5

3

27TEH_02H/02.2014


More accessories for HELM 53 from page 28

wall mounting bracket no. 61/01 with integral bolt, zinc-plated

Mounting parts Part no.

zinc-plated 006161

Part no.

zinc-plated 006162

ceiling plate no. 61/02with integral bolt, zinc-plated

zinc-plated/plastic

Part no.

zinc-plated/plastic 006500Door catcher no. 65 P

Part no.



Part no.

plastic 005360

double pair with plastic plain bearing, roller body black, with flange, support screw zinc-plated

Trolley no. 53

Track no. 60

in stock lengths of 6000 mm or cut to size, for ceiling mounting, drilled approx. every 300 to 350 mm

Part no.

stock length natural finish 006050

cut length natural finish 006052

stock length silver anodised 006051

cut length silver anodised 006053

stock length stainless steel finish anodised 006054

cut length stainless steel finish anodised 006058

Part no.

stock length natural finish, drilled holes on the side 0060460

cut length natural finish, drilled holes on the side 00604611

stock length silver anodised, drilled holes on the side 00604700

cut length silver anodised, drilled holes on the side 00604710

in stock lengths of 6000 mm or cut to size, for ceiling mounting with drilled holes on the side

2

4

5

3

1

65

40

2,5

28TEH_02H/02.2014

HELM 53Accessories

Accessories for HELM 53


aluminium silver anodisedor stainless steel finish anodised

with screw set and washers

The projection track is used in combination with the track no. 60 with drilled holes for ceiling mounting.

Part no.

2 end caps silver anodised 006001

stock length 6000 mm silver anodised

00601060


2 end caps stainless steel finish anodised 006002

stock length 6000 mm stainless steel finish anodised

00601460




The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly.

Clip-on pelmet Part no.

1 clip-on pelmet,stock length 6000 mm silver anodised

006066

1 clip-on pelmet,cut length silver anodised

006067

2 end caps for the one-sided pelmet 65 x 40 mm silver anodised

006072

2 end caps for the two-sided pelmet 65 x 53 mm silver anodised

006073

1 clip-on pelmet,stock length 6000 mm stainless steel finish anodised

006068

1 clip-on pelmet,cut length stainless steel finish anodised

006069


006074


006075







Part no.1 projection track, 6000 mm stock length

006350



006351

Part no.

1 projection track, 6000 mm stock length

006330



006351


6

7

8

HEL

M 5

3

29TEH_02H/02.2014

Door piston


Part no.

1 piece door pistonstainless steel / plastic 006180


HELM 53Accessories


for timber pelmets51 x 76 x 2,5 mm





for timber pelmets, 56,5 x 65 x 2,5 mm


aluminium


HELM spacer profile

Part no.


2 end caps, stainless steel finish anodised

006332

Part no.



006333

Part no.1 spacer profile, 6000 mm stock length, silver anodised

006370


0063799

1 spacer profile, 6000 mm stock length, steel finish anodised

006390


0063999

Part no.



006373

Further accessories

9

24,5

5

8

20

31

42

33,3

18+10 65

5

4,5

20

40

67

19

10,5

16,6

10,5

18+10

68+10

20

40

8

20

5

24,5

4,5

31

2

1

4

3

5

1

6

3

4

5

30TEH_02H/02.2014




silver anodised

Part no. stainless steel silver anodised

Page

stock length 006050 006051 006054 27

cut length 006052 006053 006058 27

Wall mounting bracket no. 61/01 Part no. Page



plastic 005360 27


zinc-plated/plastic 006500 27


plastic 021461 27

1

2

3

4

5



silver anodised


Page

stock length 006050 006051 006054 27

cut length 006052 006053 006058 27

Clip on pelmetPart no.


silver anodised


Page

2x1 clip on pelmet, stock length – 006066 006068 28

2x1 clip on pelmet, cut length – 006067 006069 28

2 end caps, double-sided – 006073 006075 28


plastic 005360 27




plastic 021461 27



silver anodised


finish anodised

Page

stock length, drilled holes on the side 00604600 00604700 – 27

cut length, drilled holes on the side 00604611 00604710 – 27



silver anodised


finish anodised

Page

1 clip on pelmet, stock length – 006066 006068 28

1 clip on pelmet, cut length – 006067 006069 28

2 end caps, one-sided – 006072 006074 28


plastic 005360 27




plastic 021461 27

1

6

3

4

5



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page




Spacer profilePart no.


silver anodised


finish anodised

Page

1 spacer profile, stock length – 006370 006390 29

1 spacer profile, cut length – 0063799 0063999 29


plastic 005360 27




plastic 021461 27

HELM 53 – Wall mounting, with wall mounting bracket no. 61/01

HELM 53 – Wall mounting, track with drilled holes on the side and one-sided pelmetting

31

5

67

40

8

20

24,5

5

235

1557

10,5

10,5

65

42,3

5

13

20

1,8

24,5

5

8

20

31

67

20

40

65

53

18+10

33,3

55

10,5

1

6

5

6

3

4

1

9

5

6

3

4

HEL

M 5

3

31TEH_02H/02.2014




silver anodised


Page

stock length 006050 006051 006054 27

cut length 006052 006053 006058 27



silver anodised


Page





plastic 005360 27




plastic 021461 27

1

6

3

4

5



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page






silver anodised


finish anodised

Page




plastic 005360 27




plastic 021461 27

1

6

9

3

4

5

HELM 53 – Ceiling mounting, with double-sided pelmetting

HELM 53 – Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting

51,5

55

76

40

8

20

24,5

5

235

65

20

10,5

13

47,6

5

9,5 31

8

14

6

3

5

32TEH_02H/02.2014


HELM 53 – Wall mounting (with projection track and pelmetting)



silver anodised


finish anodised

Page

stock length 006050 006051 006054 27

cut length 006052 006053 006058 27



silver anodised


finish anodised

Page



Projection trackPart no.


silver anodised


finish anodised

Page

1 Projection track, stock length – 006350 – 28

1 Projection track, cut length – 0063599 – 28

1 Srew set - 006351 28

2 End caps – 006352 006332 29


plastic 005360 27




plastic 021461 27

1

6

8

3

4

5

HEL

M 5

3

33TEH_02H/02.2014

14 3 2

5

34TEH_02H/02.2014


1 track no. 60, silver anodised2 trolleys no. 73 with flange2 door catchers no. 65 P1 bottom guide no. 214with x wall mounting brackets 61/01

Part no.


0073100

1 track no. 60 natural colour, 1700 mmfor door widths of 710-900 mm6 wall mounting brackets no. 61/01

0073110


0073120


0073130


0073140


0073150

Part no.1 track no. 60, natural colour, 1300 mmfor door widths of 500-700 mm

007310020

1 track no. 60 natural colour, 1700 mmfor door widths of 710-900 mm

007311020


007312020


007313020


007314020


007315020

1 track no. 60, silver anodised2 trolleys no. 73 with flange2 door catchers no. 65 P1 bottom guide no. 214without wall mounting brackets 61/01

Hardware kit

HEL

M 7

3

35TEH_02H/02.2014



Part no.

plastic 007360

double pair with ball bearing, roller body white, with flange, support screw zinc-plated

Trolley no. 73

wall mounting bracket no. 61/01 with integral bolt, zinc-plated


zinc-plated 006161

Part no.

zinc-plated 006162

ceiling plate no. 61/02with integral bolt, zinc-plated

zinc-plated, plastic

Part no.

zinc-plated/plastic 006500Door catcher no. 65 P

Part no.



Track no. 60

in stock lengths of 6000 mm or cut to size, for ceiling mounting, drilled approx. every 300-350 mm

Part no.







Part no.stock length natural finish, drilled holes on the side 0060460

cut length natural finish, drilled holes on the side 00604611

stock length silver anodised, drilled holes on the side 00604700

cut length silver anodised, drilled holes on the side 00604710

in stock lengths of 6000 mm or cut to size, for ceiling mounting with drilled holes on the side

3

2

4

5

1

65

40

2,5

36TEH_02H/02.2014

Accessories for HELM hardware 73



with screw set and washers

The projection track is used in combination with the track no. 60 with drilled holes for ceiling mounting.

Part no.

2 end caps for projection tracksilver anodised

006001

stock length 6000 mm silver anodised

00601060


2 end caps for projection trackstainless steel finish anodised

006002

stock length 6000 mm stainless steel finish anodised

00601460




The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly.

Clip-on pelmet Part no.

1 clip-on pelmet,stock length 6000 mm silver anodised

006066

1 clip-on pelmet,cut length silver anodised

006067

2 end caps for the one-sided pelmet 65 x 40 mm silver anodised

006072

2 end caps for the two-sided pelmet 65 x 53 mm silver anodised

006073

1 clip-on pelmet,stock length 6000 mm stainless steel finish anodised

006068

1 clip-on pelmet,cut length stainless steel finish anodised

006069


006074


006075



HELM 73 ME Part no.

2 trolleys no. 732 flanges no. 73 V2 door catchers no. 65 P1 bottom guide no. 216


007362

HELM 73Accessories

Part no.

kit for double doors synchronised 007380

4 trolleys no. 73 m with guide4 door catchers no. 65 P4 bottom guides no. 2142 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp

Synchronised

Part no.

tooth belt, sold by metre 000110017001

Calculation for synchronised: tooth belt length =2 x track length + 120 mm

sold by metre, black

Tooth belt

for double, timber sliding doors synchronised up to 80 kg leaf weight and door thickness from 20 mm with tooth belt deflection

Single components for double doors synchronised

6

9

10

7

8

91,5

HEL

M 7

3

37TEH_02H/02.2014

HELM 73Accessories

HELM 73Accessories


More accessories, for telescopic hardware, from page 38

Aluminium silver anodised



Aluminium stainless steel finish anodised



Clip on pelmet Part no.






006076


006077

Part no.






006078


006079

Single components for telescopic hardware

accessory kit for leaf thickness of 30 - 50 mm (without tooth belt)

Telescopic fitting no. 73 Part no.

kit for double telescopic hardware:2 deflection rollers1 door driver1 connector1 coupling joint for tooth belt

006602

kit for three-leaf telescopic hardware:2 deflection rollers2 door drivers1 connector2 deflection rollers for driver1 coupling joint for tooth belt1 door driver for deflection roller

006603

Part no.

plastic 007359

double pair with ball bearing, roller body white, with flange, support screw M8x50 zinc-plated

Trolley no. 73

11

13

12

38TEH_02H/02.2014

HELM 73Accessories








Part no.1 projection track, 6000 mm stock length

006350



006351

Part no.

1 projection track, 6000 mm stock length

006330



006351

Part no.


Calculation for telescopic: tooth belt length =2 x leaf length + 400 mm

sold by metre, blackAttention: In case of three-leaf installations two tooth belts are required!

Tooth belt

HELM Projection track, spacer profile and end caps


Part no.

plastic 031661bottom guide, plastic, suitable for bottom guide track no. 340

Guide glide no. 316 S

Part no.





stock length stainless steel finish anodised

034036


Aluminium natural finish, Aluminium silver anodised oder stainless steel finish anodised, in stock lenght of 6000 mm or cut lenght

U-Track no. 340

with mounting bracket, stainless steelL = 45 mm or L = 85 mm,adjustable, suitable for bot-tom guide track no. 340

Guide glide no. 316 S Part no.

L = 45 mm 031662

L = 85 mm 031663

18

14

15

16

17

39TEH_02H/02.2014

HELM 73Accessories






for timber pelmets, 56,5 x 65 x 2,5 mm


aluminium


HELM spacer profile

Part no.



006332

Part no.



006333

Part no.1 spacer profile, 6000 mm stock length, silver anodised

006370


0063799

1 spacer profile, 6000 mm stock length, stainless steel finish anodised

006390


0063999

Part no.



006373


for clip on pelmet 72 x 91,5 x 2,5 mm

in connection with HELM 73 synchronised


Part no.



006375

More accessories

damper and soft closing device integrated in the track up to 80 kg leaf weight

SmartStop Part no.

1 piece SmartStop 007350

1 upgrade kit one-sided with1 SmartStop and 1 trolley 73 without guide

007351

1 upgrade kit one-sided with2 SmartStops and 2 trolleys 73 without guide

007352

Door piston


Part no.

1 piece door pistonstainless steel / plastic

006180


19

24,5

5

8

20

40

20

10,5

68+10

16,631

18+10

2

1

4

3

5

3142

33,3

18+10 65 67

40

20

5

4,5

8

20

24,5

519

1

6

3

4

5

40TEH_02H/02.2014



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page




Rollapparat no. 73 Part no. Page

plastic 007360 35




plastic 021461 35

HELM 73 – Wall mounting, with wall mounting bracket no. 61/01



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35




plastic 007360 35




plastic 021461 35

1

1

6

2

3

3

4

4

5

5

HELM 73 – Wall mounting, track with drilled holes on the side and one-sided pelmetting



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page






silver anodised


finish anodised

Page




plastic 007360 35




plastic 021461 35



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35



silver anodised


finish anodisedPage





plastic 007360 35




plastic 021461 35


31

53

40 55

65 67

10,5

20

18+10

33,3

8

20

5

24,5

HEL

M 7

31

6

5

6

3

4

31

540

8

20

24,5

5

235

1557

10,5

10,5

1,8

65

42,3

5

13

20

67

1

19

5

6

3

4

41TEH_02H/02.2014

HEL

M 7

3



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page






silver anodised


finish anodised

Page




plastic 007360 35




plastic 021461 35

HELM 73 – Ceiling mounting, with pelmetting on both sides



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35



silver anodised


finish anodisedPage





plastic 007360 35




plastic 021461 35

1

1

6

6

19

3

3

4

4

5

5

HELM 73 – Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting


45

46,2

40

22

156,5+8,5

5

13

13

12,3

3151,5

5

576

40

8

20

24,5

5

235

65

20

10,5

13

47,6

5

9,518

14

6

3

5

7

1

8

42TEH_02H/02.2014



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page

1 Projection track, stock length – 006350 – 38

1 Projection track, cut length – 0063599 – 38

1 Screw set - 006351 38

2 End caps – 006352 006332 39


plastic 007360 35




plastic 021461 35

HELM 73 – Wall mounting (with projection track and pelmetting)



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35



silver anodised


finish anodised

Page

1 Projection track, stock length – 00601060 00601460 36

1 Projection track, cut length – 00601160 00601560 36

2 End caps – 006001 006002 36

HELM 73 ME Part no. Page

Set 007362 36optains: – 2 trolleys no. 73 – 2 flanges no. 73 V – 2 door catchers no. 65 P – 1 bottom guide no. 216

In case of double doors 2 sets are necessary.

1

7

8

HELM 73 ME – Wall mounting (with projection track and low installation)

1

6

18

3

4

5



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35


plastic 007359 37

HELM 73 Teleskopic Part no. Page

kit for double telescopic hardware1 006602 37

kit for three-leaf telescopic hardware2 006603 37

1optains: – 2 deflection rollers – 1 door driver – 1 connector – 1 coupling joint for tooth belt

2optains: – 2 deflection rollers – 2 door drivers – 1 connector – 2 deflection rollers for driver – 1 coupling joint for tooth belt – 1 door driver for deflection roller

Tooth belt (sold by metre) 000110017001 38

Bottom guide no. 316 S Part no. Page

plastic 031661 38


angle lenght = 45 mm 031662 38


U-Track no. 340Part no.


silver anodised


finish anodised

Page

stock length 034041 034043 034036 38cut length 034042 034044 034037 38



silver anodised


finish anodised

Page





silver anodised


finish anodised

Page





silver anodised


finish anodised

Page

2x1 spacer profile, stock length – 006370 006390 39

2x1 spacer profile, cut length – 0063799 0063999 39

end caps f. spacer profile, double-sided – 006374 006375 39

HELM 73 Synchronised Part no. Page

Set 007380 36optains: – 4 trolleys no. 73 m with guide – 4 door catchers no. 65 P – 4 bottom guides no. 214 – 2 deflection rollers – 1 coupling joint for tooth belt – 1 tooth belt clamp

Tooth belt (sold by metre) 000110017001


88,538

152,8

40

10

40

5,820

10,5

25

258

25

13,5

33,3

31

1941+2

15 3172

52,3+8

14

91,5

1,8

40

10,5 5,5

16

8

20

5

24,5

33+8 H

ELM

73

15

1

10

19

11

9

1

1

13

16

17

12

12

14

43TEH_02H/02.2014



silver anodised


finish anodised

Page

stock length 006050 006051 006054 35

cut length 006052 006053 006058 35


plastic 007359 37

HELM 73 Teleskopic Part no. Page







plastic 031661 38






silver anodised


finish anodised

Page




silver anodised


finish anodised

Page





silver anodised


finish anodised

Page





silver anodised


finish anodised

Page

2x1 spacer profile, stock length – 006370 006390 39

2x1 spacer profile, cut length – 0063799 0063999 39

end caps f. spacer profile, double-sided – 006374 006375 39


Set 007380 36optains: – 4 trolleys no. 73 m with guide – 4 door catchers no. 65 P – 4 bottom guides no. 214 – 2 deflection rollers – 1 coupling joint for tooth belt – 1 tooth belt clamp

Tooth belt (sold by metre) 000110017001

HELM 73 – Synchronised, track with drilled holes on the side and one-sided pelmetting

1

1

11

12

19

13

14

15

16

17

9

10

HELM 73 – Telescopic hardware

Calculation for synchronised: tooth belt length = 2 x track length + 120 mm

Calculation for telescopic: tooth belt length = 2 x leaf length + 400 mm


44TEH_02H/02.2014


HEL

M 8

5

45TEH_02H/02.2014


HELM 85


Track aluminium silver anodised, with drilled holes for ceiling and wall mounting in stock lengths of 6000 mm or cut to size

Special featureenclosed track system: consisting of track, pelmet, end caps and plastic strip

Trolley double roller, with ball bearings

Realisable options• single and multiple leaf constructions• mounting options: Ceiling mounting and wall mounting• synchronised opening



14 7

2

5

9

3

6

8

46TEH_02H/02.2014


1 track no. 851 plastic strip no. 821 pelmet no. 852 end caps no. 852 trolleys no. 862 flanges no. 832 door catchers no. 85 P1 bottom guide no. 114

Part no.


008510


008512


008513


008514

Track no. 851in stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm, silver anodised

Part no.



Hardware kit

1

HEL

M 8

5

47TEH_02H/02.2014



Part no.

zinc-plated 008660zinc-plated/plastic, with ball bearing and support screw (M10 x 30)

Trolley no. 855

Part no.

right 008080

left 008081tin phosphate coated, catch force adjustable

Door catcher no. 85 P7

plastic

Plastic strip no. 852 Part no.

plastic black 008260

plastic grey 008261


End cap no. 854 Part no.

aluminium silver anodised 008060

aluminium silver anodised, in stock lengths of 6000 mm or cut to size

Pelmet no. 853 Part no.



Part no.

zinc-plated 008320zinc-plated

Flange no. 856

in stock lengths of 6000 mm or cut to size, drilled approx. every 500 mm, aluminium natural finish

Bottom guide profile no. 1408 Part no.

stock length 014050

cut length 014051

plastic

Bottom guide no. 1149 Part no.

black 011460

5

7

2

4

3

6

8

9

48TEH_02H/02.2014

HELM 85Accessories


Kit for double doors synchronised

Part no.


2 x deflection roller1 x wire rope holder1 x door driver2 x rope clamp1 x turnbuckle1 x bag gasketing, 12 m wire

accessory kit for leaf thickness of 30 - 42 mm

Synchronised

Part no.

plastic 021661zero-clearance bottom guide, matches bottom guide profile no. 240

Bottom guide no. 216 S

plastic, in stock lengths of 3000 mm or cut to size

Bottom guide profile no. 240 K

Part no.

stock length, plastic 024062

cut length, plastic 024063



silver anodised Page

stock length 008050 46cut length 008051 46

Plastic strip no. 85 Part no. Page

black 008260 47

grey 008261 47

Pelmet no. 85Part no.





Flange no. 85 Part no. Page



zinc-plated, right 008080 47

zinc-plated, left 008081 47





plastic, black 011460 47

Position 1 to 9 even with HELM 85, Wall- and ceiling mounting


Set 008700 48optains: – 2 deflection rollers – 1 wire rope holder – 1 door driver – 2 rope clamps – 1 turnbuckle – 1 bag gasketing, 12 m wire

10

12

20

40

25

35

4,5

3

50

85 80+4

3

29

40

25

3

8

12

20

35

4,5

50

8385

3

3

3

7

7

5

8

8

9

9

6

2

2

1

1

5

6

10

HEL

M 8

5

49TEH_02H/02.2014


HELM 85, Wall or ceiling mounting




Plastic strip no. 85 Part no. Page

black 008260 47

grey 008261 47

Pelmet no. 85Part no.





Flange no. 85 Part no. Page



zinc-plated, right 008080 47

zinc-plated, left 008081 47





plastic, black 011460 47

1

2

3

7

5

8

6

9

Position 1 to 9 even with HELM 85, Wall- and ceiling mounting


Set 008700 48optains: – 2 deflection rollers – 1 wire rope holder – 1 door driver – 2 rope clamps – 1 turnbuckle – 1 bag gasketing, 12 m wire

1

10

HELM 85 synchronised – Wall or ceiling mounting

50TEH_02H/02.2014

HELM 120 and HELM 150

HEL

M 1

20 a

nd

HEL

M 1

50

51TEH_02H/02.2014

HELM 120 and HELM 150

HELM 120


Track aluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting




HELM 150


Track aluminium silver anodised, in stock lengths of 6000 mm or cut to size, with drilled holes for ceiling mounting








15 3

6

4

2

52TEH_02H/02.2014


1 track no. 1202 trolleys no. 120-912 flanges no. 120-932 door catchers no. 120 P1 bottom guide no. 216with x wall mounting brackets

Part no.

1 track no. 120, 1400 mmfor door widths of 600-800 mm5 wall mounting brackets no. 120-01

120120000016


120120000017


120120000018


120120000019


120120000020


120120000021

Part no.


120120000022


120120000023


120120000024


120120000025


120120000026


120120000027

1 track no. 1202 trolleys no. 120-912 flanges no. 120-932 door catchers no. 120 P1 bottom guide no. 216without wall mounting bracket

Hardware kit

3054

20

HEL

M 1

20

53TEH_02H/02.2014



Part no.

stainless steel 120070093002stainless steel

Flange no. 120-934

Part no.

plastic 021660plastic, with plug

Bottom guide no. 216 6

Track no. 1201in stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm, silver anodised

Part no.



aluminium natural finish, including locking screw, (fixing spacing: 600 mm)

Wall mounting bracket no. 120-012 Part no.

aluminium 120010001001

stainless steel/plastic, catch force adjustable

Part no.

plastic/stainless steel 120040001002Door catcher no. 120 P5

Part no.

plastic/stainless steel 120050091001

plastic/stainless steel, with precision ball bearing, support screw: stainless steel M8x45

Trolley no. 1203

Part no.

bottom door buffer 0891306

with fixing material

For heavy duty sliding in-stallations we recommend an additional bottom door buffer.

Bottom door buffer

9

7

8

54TEH_02H/02.2014

HELM 120Accessories

Pelmets for HELM 120

Part no.

aluminium natural finish 120110023001

Part no.





aluminium natural finish for pelmet no. 150 W/D,every 700 mm

Adapter piece no. 120

Pelmets no. 150 W

for wall mounting,aluminium natural finish or aluminium silver anodised, in mill lengths of 6000 mm or cut to size

End cap no. 150 W

for wall mounting, aluminium natural finish or RAL 7035 (light grey)

Part no.

aluminium natural finish/left 150110015024

aluminium natural finish/right 150110015025

light grey/left 150110015011

light grey/right 150110015012


8

7

9

HEL

M 1

20

55TEH_02H/02.2014

HELM 120Accessories



Part no.




Tooth belt

Part no.


2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp


Synchronised

Art.-Nr.



Trolley no. 120

Pelmet no. 150 D

for ceiling mounting, aluminium natural finish or aluminium silver anodised, in mill lengths of 6000 mm or cut to size

Part no.





End cap no. 150 D

for ceiling mounting, aluminium natural finish or RAL 7035 (light grey)

Part no.






10

11

12

9

8

56TEH_02H/02.2014

HELM 120Accessories




006604

kit for three-leaf telescopic hardware:2 deflection rollers2 door drivers1 connector2 deflection rollers for driver1 coupling joint for tooth belt1 door driver for deflection roller

006605


Part no.




Tooth belt

Part no.



Trolley no. 120

Art.-Nr.



Part no.








Bottom guide profile no. 340

with mounting bracket, stainless-steel, suitable for bottom guide track no. 340


L = 45 mm 031662

L = 85 mm 031663


13

14

15

16

17

18

HEL

M 1

20

57TEH_02H/02.2014

HELM 120Accessories



bottom guide, plastic, suitable for bottom guide track no. 240


plastic, in stock lenght of 3000 mm or cut lenght

Bottom guide profile no. 240 K

Part no.

stock lenght, plastic 024062

cut lenght, plastic 024063

Part no.

plastic 021661

53,5

125

2140

22+1

0

25

40

13

15

10,5

5

4,5

93

73

10,5

25

40

13

15

522

+10

2

1

3

3

5

5

7

6

6

4

4

8

88

17 7

58TEH_02H/02.2014




stock length – 120020000006 53

cut length – 120020000010 53


zinc-plated 120010001001 53


plastic/stainless steel 120050091001 53

Flange no. 120-93 Part no. Page

stainless steel 120070093002 53




plastic 021660 53

Adapter piece no. 120 Part no. Page

natural finish 120110023001 54

Pelmet no. 150 WPart no.



stock length 150110003020 150110003007 54

cut length 150110003022 150110003009 54

End cap no. 150 WPart no.


light grey Page

left 150110015024 150110015011 54

right 150110015025 150110015012 54





stock length – 120020000006 53

cut length – 120020000010 53








plastic 021660 53

Adapter piece no. 120 Part no. Page

natural finish 120110023001 54

Pelmet no. 150 DPart no.



stock length 150110003021 150110003008 54

cut length 150110003023 150110003010 54

End cap no. 150 DPart no.


light grey Page

left 150110015029 150110015027 55

right 150110015030 150110015028 55




stock length – 120020000006 53

cut length – 120020000010 53








plastic 021660 53


kit for double doors synchronised 120110022022 55



HELM 120 – Wall mounting, with pelmetting

2

1

3

3

5

5

7

6

6

4

4

8

88

HELM 120 – Ceiling mounting, with pelmetting on both sides

17 7




stock length – 120020000006 53

cut length – 120020000010 53





HELM 120 Telescopic Part no. Page







plastic 031661 56






silver anodised


finish anodised

Page


1

2

3

4

5

6

7

8

9

1

3

4

5

6

7

8

9

25

25

148

10

4040

~6 25

39+2

~340

15

~6

349016

10,5

13

15

12,3

5

40

~25 ~26

34

4030+7

~38,2

1

10

4

12

11

5

6

1

1315

14

16

18

4

17

HEL

M 1

20

59TEH_02H/02.2014

HEL

M 1

20




stock length – 120020000006 53

cut length – 120020000010 53








plastic 021660 53









stock length – 120020000006 53

cut length – 120020000010 53












plastic 031661 56






silver anodised


finish anodised

Page


HELM 120 – Synchronised

HELM 120 – Telescopic

1

10

3

12

11

4

5

1

1315

14

16

18

17


Calculation for syncronised: tooth belt length = 2 x track length + 120 mm

1

13

14

4

15

16

17

18

1

10

4

5

6

11

12

15 23

6

4

60TEH_02H/02.2014


Part no.




150020000013


150020000014


150020000015


150020000016


150020000017

Part no.

2 trolleys no. 150-912 flanges no. 150-932 door catchers no. 150 P1 bottom guide no. 316

150120000001

Track no. 150

aluminium silver anodisedin stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: 600 mm)

Hardware kit

1

3054

20

HEL

M 1

50

61TEH_02H/02.2014



wall mounting bracket no. 150-01, aluminium casting material, with stainless steel screws, nut and serrated lock washers (fixing spacing: 600 mm)


1 piece aluminium 150010001001

7 pieces aluminium 150010001002

Part no.

1 piece aluminium 150010002001

7 pieces aluminium 150010002002

ceiling plate no. 150-02aluminium casting material, with stainless steel screws, nut and serrated lock washers (fixing spacing: 600 mm)

plastic/stainless steel, catch force adjustable

Part no.

plastic/stainless steel 150040001002Door catcher no. 150 P

Part no.



Trolley no. 150

Part no.

stainless steel 150070093001

stainless steel

Flange no. 150-93

Part no.

plastic 031660plastic, with plug


Part no.

bottom door buffer 0891306

with fixing material

For heavy duty sliding installations we recom-mend an additional bottom door buffer.

Bottom door buffer

Part no.


aluminiumAttention: For one track connection 2 pieces track connectors are required.

Track connector no. 150-03

2

5

3

4

6

9

6

8

16

7

62TEH_02H/02.2014


Track and pelmets for HELM 150

Part no.



Track no. 150 B7aluminium silver anodisedin stock lengths of 6000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: 6000 mm)

Part no.


aluminiumAttention: For one track connection 2 pieces of track connectors are required.

Track connector no. 150-03

7

HEL

M 1

50

63TEH_02H/02.2014



Part no.





for ceiling mounting,aluminium natural finish or aluminium silver anodised, in stock lengths of 6000 mm or cut to size

Part no.





for wall mounting,aluminium natural finish or aluminium silver anodised, in stock lengths of 6000 mm or cut to size cut to size

Pelmet no. 150 W

Pelmet no. 150 D

8

for ceiling mounting, aluminium natural finish or RAL 7035 (light grey)

Part no.





End cap no. 150 W

for wall mounting,aluminium natural finish or RAL 7035 (light grey)

Part no.






Part no.




Synchronised

Part no.




Tooth belt

End cap no. 150 D


8

9

9

10

11

8

64TEH_02H/02.2014

HELM 150Accessories

Part no.



sold by metre, blackAttention: In case of three-leaf installations two tooth belts are required!

Tooth belt




006606

kit for three-leaf telescopic hardware:2 deflection rollers3 door drives1 connector2 deflection rollers for driver2 coupling joint for tooth belt

006607


Art.-Nr.



Part no.











L = 45 mm 031662

L = 85 mm 031663

12

13

14

15

16

HEL

M 1

50

65TEH_02H/02.2014




Part no.







Aluminium natural finish, Aluminium silver anodised or stainless steel finish anodised, in stock lenght of 6000 mm or cut lenght




plastic 031661

30 +

12

14,5

30

40

93

46

53,56,5

19,5

19,5

125

2546

30 +

12

53,5

14,5

30

40

19,5

19,5

4

4

3

3

5

5

2

7

6

6

8

8

7

66TEH_02H/02.2014





stock length – 150020002006 62

cut length – 150020002010 62








plastic 031660 61

Pelmet no. 150 DPart no.



stock length 150110003021 150110003008 63

cut length 150110003023 150110003010 63

End cap no. 150 DPart no.


light grey Page

left 150110015029 150110015027 63

right 150110015030 150110015028 63




stock length – 150020002006 62

cut length – 150020002010 62


zinc-plated 150010001001 61








plastic 031660 61

Pelmet no. 150 WPart no.



stock length 150110003020 150110003007 63

cut length 150110003022 150110003009 63

End cap no. 150 WPart no.


light grey Page

left 150110015024 150110015011 63

right 150110015025 150110015012 63

7

2

3

4

5

6

8

9

HELM 150 – Wall mounting, with pelmetting

7

3

4

5

6

8

9

HELM 150 – Ceiling mounting, with pelmetting




stock length – 150020002006 62

cut length – 150020002010 62








plastic 031660 61



optains: 2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp





stock length – 150020002006 62

cut length – 150020002010 62












plastic 031661 64






silver anodised


Page


44

4630+7

40

8

19,5

19,5

~38,3

~25 ~26

39+2

46

30

4010

40

8,5

100,5

44

4920,5

5,5

25

258 14

6

1

1

4

12

13

14 15

16

3

5

10

3

4

6

11

HEL

M 1

50

67TEH_02H/02.2014




stock length – 150020002006 62

cut length – 150020002010 62








plastic 031660 61



optains: 2 deflection rollers1 coupling joint for tooth belt 1 tooth belt clamp


1

3

4

5

6

10

11





stock length – 150020002006 62

cut length – 150020002010 62












plastic 031661 64






silver anodised


Page


HELM 150 – Synchronised

1

3

4

12

13

14

15

16

HELM 150 – Telescopic


Calculation for syncronised: tooth belt length = 2 x track length + 120 mm

68TEH_02H/02.2014

Hardware for Sliding Doors (Timber)Flush and Pull Handles

Flu

sh a

nd

Pu

ll H

and

les

69TEH_02H/02.2014

D H TL Supports

Ø 30 80 from 200 Ø 25

KWS 8179.. Part no.

stainless steel

brushed 8179.82as a pair for two-sided operation and as piece for one-sided operation

For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories, TEK_0308"

TL

KWS Pull Handles

D L H

Ø 25 from 200 75

KWS 8170.. Part no.

stainless steel

brushed 8170.82as a pair for two-sided operation and as piece for one-sided operation

For more finishes and the relevant fixing material please request the brochure ”Pull Handles and Accessories, TEK_0308”

KWS Flush Handles

Part no.

aluminium machined according to E 6

KWS 1 silver-anodised 5251.41

KWS 2 nickel silver-anodised 5251.42

stainless steel

brushed 5251.82

polished 5251.83

Ø 65 mm sliding door flush handle for doors 38 - 42 mm

more door thicknesses from 32 mm on request

KWS 5251..


TL

TL

70TEH_02H/02.2014

KWS 8525..Part no.

stainless steel

brushed 8525.82handle bar of stainless steel 30 x 30 x 2 mmhandle supports of aluminium, stainless steel finish anodised

as a pair for two-sided operationand as piece for one-sided operation

For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories - TEK_0308".

TL L H

400 300 80

500 400 80

KWS 8537..Part no.

stainless steel

brushed 8537.82handle bar of stainless steel 40 x 10 mm handle supports of aluminium, stainless steel finish anodised

as a pair for two-sided operation and as piece for one-sided operation

For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories - TEK_0308".

TL L H

400 300 60

500 400 60


Flu

sh a

nd

Pu

ll H

and

les

71TEH_02H/02.2014

We are pleased to send you further information regarding the KWS range on request.

KWS 8520..

30 x 30 tube

L = 2500 mm or cut

Part no.

stainless steel

brushed 8520.82

KWS 8702..

for 30 x 30 x 2 mm tube

modular support KS-30 for concealed fixing

of aluminium, stainless steel finish anodised

KWS 8704..

for 30 x 30 x 2 mm tube

modular support KS-30 for concealed fixing

of aluminium, stainless steel finish anodised

Part no.


stainless steel finish anodised 8702.35

Part no.


stainless steel finish anodised 8704.35


72TEH_02H/02.2014

Hardware for Sliding Doors (Timber)Technical Specifications

Single leaf installation Two leaves run in one track profile and can: • be moved independently of each other• be moved simultaneously in opposite directions (synchronised)

Two leaves run in two track profiles. • type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection.

Three-leaf installation (two plus one). Three leaves operate in two track profiles.• type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection.• The leaves are moved independently of each other.

Three leaves run in three track profiles. • type 1: The front leaf pulls the rear leaves into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaves into the desired position by means of telescopic deflection.

Four-leaf installation (two plus two). Four leaves run in two track profiles.• type 1: The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection.• The leaves can be moved independently of each other.• The leaves can be moved simultaneously in opposite directions.

Installation types

Tech

nic

al S

pec

ifica

tio

ns

73TEH_02H/02.2014

74TEH_02H/02.2014

Sample of Request for Proposal

_______ sets HELM 73

Installation type: single leaf installation (see p. 72 )

Leaf width: 1000 mm

Leaf thickness: 40 mm

Leaf weight 60 kg

Material: timber

Track mounting: by projection track, low headroom installation

Type: track and projection track in stainless steel effect

Special equipment: damper and soft closing device SmartStop, both sides

Bottom guide: bottom guide profile 240 K with bottom guide 216 S

Accessories: flush handle 5251.82 stainless steel, brushed

Hardware for Sliding Doors (Timber)Sample of Request for Proposal

Woelm GmbH I Hasselbecker Str. 2- 4 I D - 42579 Heiligenhaus I Tel.: + 49 (0) 20 56 - 18 - 0 I Fax: + 49 (0) 20 56 - 18 - 21

Ap

pen

dix

75TEH_02H/02.2014

Order Enquiry

Company ____________________________________________

Name ______________________________________________

Street ______________________________________________

Postcode/city _________________________________________

Supply exclusively through specialised trade. Please indicate your specialist dealer if appropriate: ______________________________

Required information for timber sliding doors

Telephone ____________________________________________

Fax ______________________________________________

E-mail ______________________________________________

Contact person _____________________________

Number of required installations _____________________ piece

HELM sliding hardware no. ______________________

Number of leaves ______________________ Installation type _____________________________ (see page 72)

Leaf widths ______________________ mm Leaf thickness _____________________

Leaf weight ______________________ kg

Straight slide installations

bottom guide bottom guide profile no. 240 K Part no.: 0240.62 + 0240.63

bottom guide profile no. 240 Part no.: 0240.60 + 0240.61

bottom guide profile no. 340 Part no.: 0340.41 + 0340.42 + 0340.36 + 0340.37

bottom guide no. 216 Part no.: 021660

bottom guide no. 216 S Part no.: 021661

bottom guide no. 316 Part no.: 031661

bottom guide no. 316 S Part no.: 031661

track mounting wall mounting bracket ceiling plate (only for HELM 53, 73, 150

direct wall mounting direct ceiling mounting

projection track

pelmets not required required (aluminium, aluminium silver anodised or stainless steel finish anodised)

Flush / pull handles

sliding door flush handle no. 5251 Part no.: _______________________________

pull handle no. 8170 Part no.: _______________________________



Operation synchronised telescopic 2-leaf telescopic 3-leaf

Hardware for Sliding Doors (Timber)Enquiry Form

Woelm GmbHHasselbecker Str. 2- 4D - 42579 HeiligenhausPhone: + 49 (0) 20 56 - 18 - 0Telefax: + 49 (0) 20 56 - 18 - [email protected]

Woelm Austria GmbHSeewalchen 5aA - 5201 SeekirchenPhone: + 43 (0) 62 12 - 25 02Telefax: + 43 (0) 62 12 - 69 [email protected]

The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission.

Part no. TEH_02H/02.2014This catalogue supersedes all previous catalogues.

TEK_0102 TEK_0308 TEK_0506

TEK_0407

TEH_01 TEH_02H TEH_02G

TEH_02D TEH_06 TEH_09

TEH_11 TEH_12 TEH_40

HELM Range

TEH_01 Hardware for Sliding Wardrobe Doors

TEH_02H Hardware for Sliding Doors (Timber)

TEH_02G Hardware for Sliding Doors (Glass)

TEH_02DDesign Hardware forSliding Doors (Timber and Glass)

TEH_06 Hardware for Sliding Gates

TEH_09 Hardware for Gateway Gates

TEH_11 Hardware for Curtains and Tarpaulins

TEH_12Safety Equipment against Falls from a Height (PSE)

TEH_40 Hardware for Sliding Shutters

KWS Range

TEK_0102 Door Holders and Door Stops

TEK_0308 Pull Handles, Door Handles and Accessories

TEK_0506 Flush Handles and Locks

TEK_0407Hardware for Handrails, Floor Rails,Coat Racks and Toilet Partition Walls

Documents

Hardware for Sliding Doors (Timber) - Spinea Oy · Hardware for Sliding Doors (Timber) Catalogue: TEH_02H. 2 TEH_02H/02.2014 Hardware for Sliding Doors (Timber) Contents HELM 50 General