HIGH PRESSURE TRIPLEX MUD PUMP UNITS FROM … · herrenknecht vertical gmbh high pressure triplex mud pump units from herrenknecht vertical: tailored to customer requirements mud

HERRENKNECHT VERTICAL GMBH

HIGH PRESSURE TRIPLEX MUD PUMP UNITS FROM HERRENKNECHT VERTICAL: TAILORED TO CUSTOMER REQUIREMENTS

MUD PUMP UNITS

High reliability Low noise level Low maintenance Short setup time Small footprint Made in Germany

In cooperation with

Special features are always possible due to

customized production.

EVERY UNIT SPECIFICALLY ADAPTED TO CUSTOMER REQUIREMENTS

The mud pump unit TSP series from Herrenknecht Vertical, a newly designed triplex mud pump unit rated for a maximum operating pressure of 517 bar (7,500 psi), is completely “Made in Germany”. The mud pumps from the renown German pump manufacturer Schäfer & Urbach are electrically driven by AC or DC motors which are either water- or air-cooled. The mud pumps have no internal pinion with inside gearing. The power from the electric motor is transmitted to the mud pump via a spur gearbox. The complete mud pump unit is mounted on a skid and therefore easy to handle.

Basic features: Mud pump Gearbox Electric motor Lube circuit Cooling circuit Liner flush system Oilfield skid

Key benefits: Ball joint heads are used in the power unit

instead of crossheads. Accordingly, no shear forces develop. Both maintenance and the costs associated with servicing are reduced.

The use of a four-fold mounted crank-shaft and the elimination of an internal pinion shaft allows us to grant an extend-ed guarantee period for the power unit.

A dumping chamber prevents the water/mud and gear oil from intermixing; which means less servicing and greater environ-mental protection.

Optional features: Hydraulic quick release for valve covers

and liners Pulsation dampener Relief line with safety valve High pressure manifolds Suction manifold Charge pump Noise protection Jib crane Variable frequency drive

TECHNICAL DETAILS MUD PUMP UNIT TSP SERIES

2950

2980

8750

8750

330038

7033

10

Max. input power: 800 kW (1,000 hp)

Max. discharge flow: 2,428 l/min (640 gpm)

Max. operating pressure: 517 bar (7,500 psi)

Max. liner x max. stroke: 6.5 ” x 8 ”

Max. number of revolutions: 180 rpm

Drive: AC or DC electric motor, diesel or diesel-hydraulically

Transmission: spur gear

T S P 6 5 - 8 0Max. input power: 1,000 kW (1,300 hp)



Max. liner x max. stroke: 7 ” x 10 ”


Drive: AC or DC electric motor


T S P 7 0 - 1 0 0

Configuration type “Basic” Oilfield skid Single spur gear Water- or air-cooled

Configuration type “Standard” Oilfield skid Single spur gear Water-cooled Noise protection

Available with: TSP 65-80 TSP 70-100 TSP 75-120 TSP 80-120

Available with: TSP 70-100 TSP 75-120 TSP 80-120

3200

6900 2980

2900

6900

2980

6050

3870

3280 29

80

2980 36

00 3870

2980

2980

3300

2950

2980

8750

8750

330038

7033

10

Max. input power: 1,200 kW (1,600 hp)



Max. liner x max. stroke: 7,5 ” x 12 ”




T S P 7 5 - 1 2 0Max. input power: 1,600 kW (2,200 hp)

Max. discharge flow: 3,857 l/min (1,019 gpm)


Max. liner x max. stroke: 8 ” x 12 ”



Transmission: spur gear or double spur gear

T S P 8 0 - 1 2 0

Configuration type “Offshore” Oilfield skid Double spur gear Water- or air-cooled

Available with: TSP 80-120

The TSP series fit ideal to the TI deep drilling rigs from

Herrenknecht Vertical.

OVERVIEW HERRENKNECHT VERTICAL MUD PUMP UNIT TSP SERIES

Max. input power 800 kW 1,000 kW 1,200 kW 1,600 kW (based on 90 % (1,000 hp) (1,300 hp) (1,600 hp) (2,200 hp)mechanical efficiency)

Max. operating pressure

standard 5,000 psi 5,000 psi 5,000 psi 7,500 psi

optional 7,500 psi 7,500 psi 7,500 psi –

Max. discharge flow 2,428 l/min 2,793 l/min 3,390 l/min 3,857 l/min(based on 100 % [640 gpm] [740 gpm] [895 gpm] [1,019 gpm]volumetric efficiency)

Max. number of revolutions 180 rpm 150 rpm 130 rpm 130 rpm

Weight in basic 27,000 kg 32,000 kg 38,000 kg 45,000 kgconfiguration approx.

TSP 65-80 TSP 70-100 TSP 75-120 TSP 80-120

M U D P U M P U N I T T S P S E R I E S

PERFORMANCE CURVES MUD PUMP UNITS

C H A R A C T E R I S T I C D I A G R A M

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500

Max. discharge flow at max. rpm [l / min]

Pressure[bar]

500

400

300

200

100

0

TSP 65-80 / 1,000 hp

TSP 70-100 / 1,300 hp

TSP 75-120 / 1,600 hp

TSP 80-120 / 2,200 hp

AUTOMATED RIG TECHNOLOGY

Herrenknecht Vertical GmbH, a subsidiary of Herrenknecht

AG, designs and manufactures deep drilling rigs and

equipment for wells down to 8,000 meters. The innovative

rigs are specifically adapted to customer and project

requirements offering high technical standards based on

offshore technology and a number of new developments.

Central features comprise an optimized safety concept

(hands-off technology) and flexible energy management,

comprehensive automation of working processes to increase

time savings as well as integrated noise protection devices

to benefit our environment.

10 / 2

017

| HK2

603

HERRENKNECHT VERTICAL GmbHIm Heidenwinkel 5D-77963 SchwanauPhone +49 7824 302-1300 Fax +49 7824 302-1330info@herrenknecht-vertical.comwww.herrenknecht-vertical.com

Documents

HIGH PRESSURE TRIPLEX MUD PUMP UNITS FROM … · herrenknecht vertical gmbh high pressure triplex mud pump units from herrenknecht vertical: tailored to customer requirements mud