HOW TO ACTIVATE IPTV ON OPENBOX V9S VIA PORTAL

USING MAC ADDRESS

1. Press Menu Button on your remote and go to “NetCentre” and go to “Camds Setup”

2. Inside Camds Setup go in to IPTV

3. In IPTV choose Stalker in Type. Press “Blue” button on your remote to delete current

account and it will reveal your box’s exact MAC address.

4. In Host Name Enter portal address (same as you use for MAG devices). Use MAC

Address to activate line in your panel (use Add New MAG Device option in your

panel). After activating press OK on Default and if activation successful you will get a

message at the bottom “Status: Get Channel Success”

If you are getting error message “Get channel fail” please follow the steps at page 5

5. Now exit camds setup and go to Network App

6. Go to Stalker IPTV and open the app

7. Now you can get all the channels here

8. To open the Favourite Groups or Categories press Play button on your remote

Troubleshooting If you are getting error message “Get channel fail” please follow the steps below:

Go to NetCentre --> Network Settings

Scroll Down to IPTV Cache Level

Change the Cache Level by pressing OK button on your remote to 1, 2 or 3 (try 1

first)