Hubbell Model EMV

EMERGENCY SAFETY APPLICATIONSTEPID WATER HEATING SYSTEMS

Hubbell Electric Heater Company P.O. Box 288 Stratford, CT 06615 P: 203-378-2659 F: 203-378-3593www.hubbellheaters.com

• The Hubbell EMV Provides high volume tepid water for safety drench systems by integrating a specially designed mixing valve with a high quality cement lined electric storage water heater. • Hydrastone cement lining provides tank longevity (No Glass Lining)• Designed to maintain 120 gallons of water at 170°F.

• The integrated mixing valve blends 170°F water from the tank with incoming cold water to achieve a continuous flow of appoximately 85°F tepid water to operate a safety shower and an eye/face wash fixture.

BULLETINWATER HEATERS

TM

Turn-Key Package Solution For Safety Systems

The Hubbell model EMV water heater is a packaged system designed to meet the requirements of ANSI/ISEAZ358.1-2014 for tepid water delivery to an emergencydrench system. This heavy-duty water heater is constructedof a carbon steel tank and internally lined with 1/2" thickHydrastone cement to ensure tank longevity when operatingat elevated temperatures,and is fully insulated with 3"thick polyurethane foam to minimize stand-by heat loss. The water heater is packaged with a mixing valve specificallydesigned, tested and proven for use in emergency safetyshower/face/eyewash applications. The entire packageincluding the mixing valve is factory piped and mountedto the water heater to provide single source responsibility.

A Heavy Duty, Reliable Source For Tepid Water Delivery

Hubbell Electric Heater Company P.O. Box 288 Stratford, CT 06615 P: 203-378-2659 F: 203-378-3593www.hubbellheaters.com

OUTLINE DIMENSIONS

A

19"Withdrawal

Space

Model EMV Dimensional Data Dimensions (Inches) Storage Base Floor to Floor to Piping Floor Shipping Capacity Model Diameter Height Inlet Outlet Height to T&P Weight (Gallons) Number "A" "B" "C" "D" "E" "F" (LBS) 120 EMV120 30 69.25 8 24 8 10 875

Note: Alternate storage capacities are available for smaller or larger requirements. Please consult factory for sizing requirements.

F

E

B

C

D

Tank Cross Section

Steel Pressure Vessel

1/2"

CementLining

Automatic Air Vent Valve

Mixing Valve

Tepid Water Outlet

Thermostat Sensor

3" Foam Insulation

Cold Water Inlet Cold Water Inlet

T&P GaugeHi-Limit

Thermostat

Heating Element

Operating Thermostat

Drain Valve