Upload
others
View
59
Download
1
Embed Size (px)
Citation preview
Hybrid Type Custom Abutment Using CAD/CAM System
TS Link Abutment
Expand Various Clinical Cases with a Wide Range of Lineups
Prosthetic Workflow
· Secure more reliable prosthetic holding force with 3, 5mm height
1 2 3 4 5 6 7
Impression taking Scan impression modelMaking impression model Connect TI base on lab analog Connect scan body on TI base Design & mill zirconia abutment Set the prosthesis
Official Library Provided (3shape / ExoCAD)
· Improved of Ti-Zr suitability using private library
(minimizes the dimensional error on the zioconia abutment while milling)
· 3 types of conditions of cement gap inside Zr part (Selectable according to the environment of CAD / CAM device)
Optimal Compatibility with OSSTEM TS Fixture
· 150% improved of long-term stability compared to others products
3mm
5mm
Anterior region case Posterior region case
TS Link abutment
Abutment screw
Scan body
· Select abutment(1 or 2mm gingiva) depending on fixture implanted condition
Fixture
Abutment
Select G/H 1mm in case of bone level implantation
Select G/H 2mm in case of 1mm lower implanted than
bone level
1mm1mm1mm
2mm
In case of implanted
1 mm deeper
Official OSSTEM library available
Available Prosthetic Type
· Screw type / cement type