Hydraulic ram unit for piling posts · 2019. 6. 29. · HRE 4000 HRE 6000 PB 420 PB 420 Transportlength with Mastl. 3,70m: xxx xxx Transportlength with Mastl. 4,70m: 5000 mm xxx Transportlength

GAYK Baumaschinen GmbH Tel +49 (0)6026/1509 + 97885-0 email: [email protected] Dieselstraße 3 Fax +49 (0)6026/1525 http: www.gayk-baumaschinen.de D-63762 Großostheim

Due to replaceable and readjustable bronze slide

rails in all mobile parts such as e.g. slide chariot

and feed pipe as well as solid hydraulic valves

“MADE IN GERMANY“ especially designed for

construction machinery a long service life is ensured.

Equipped with an optimal turn drive unit and down-

hole hammer, the machine can be modified into a

drilling truck within a short time for drilling shells at

crossings and for pile-driving

Fif..Transport position

The fully hydraulic ram HRE is based on a solid

tracked truck with live ring and rubber chains.

The drive is a Hatz two or three-cylinder Diesel

engine which has proven itself in many

construction machines. As we attach great

importance to stability, it is also possible to extract

posts and drill holes for shells. The modification

equipment for extraction consists of two drawbars,

ram block, and clamping tongs retainer with

clamping tongs.

The modification time is approx. 15 min. After that,

1 person is able to extract posts quickly, safely, and

without any problems without using a truck crane

and post extractor. With a feed of 1.9 m from the

front edge chain to the centre of hammer and a

useful height of 3 m even big posts can be rammed

easily.

Fig. Drilling Unit

Fig. Extractor unit

Hydraulic ram unit for piling posts


Due to the chain pressure mount, the

hammer will be pushed onto the post at a

preset pressure with a small hammer

weight of the hammer. Therefore the

ramming time is much shorter.

In order to achieve an even ramming

depth, the HRE has been equipped with an

electric cutoff. It switches off the rammer

and chain feed automatically with the

required ramming depth.

The big switch cabinet includes

all fuses and relays as well as

enough room for the

connection of other

consumers.

In order to minimise downtimes, only

screwings and hoses of best possible

quality have been chosen. If

nevertheless a hose is defective, it

may be procured at any hydraulic

point of support immediately.


HRE 500

PB 160 PB 310

Transportlength with Mastl. 3,70m: 4000 mm 4000 mm

Transportbreath: 1750 mm 1750 mm

Transport height: 2050 mm 2050 mm

Weight with hammer 1.800 kg 1.900 kg

Max.L of the posts to be rammed 3 m 3 m

Number of impacts/min 670-1450 min¹ 530 - 1150 min¹

Joule: 770 850

Weight of the hammer 76 kg 136 kg

Oil pressure /bar: 190 190

Oil quantity l/min: 80l min¹ 80l min¹

Oil tank / Menge l: 180 l 180 l

Motor: Hatz 2L 41C Hatz 2L 41C

Power / kw: 24,4 24,4

Elektric / V: 12 12

Tank capacity / l: 60 60

Technical Data


HRE 800 HRE 1000 HRE 3000

PB 160 PB 160 PB 310 PB 160 PB 310

Transportlength with Mastl. 3,70m: xxx 3750 mm 3750 mm 3750 mm 3750 mm

Transportlength with Mastl. 4,70m: xxx 4750 mm 4750 mm 4750 mm 4750 mm

Transportlength: 3000 mm

Transportbreath: 2000 mm 2000 mm 2000 mm 2000 mm 2000 mm

Transportheight: 2200 mm 2200 mm 2200 mm 2200 mm 2200 mm

Weight with hammer 2.800 kg 3.100 kg 3.600 kg 3.160 kg 3.660 kg

Max.L of the posts to be rammed 2 m 3 m / opt. 4 m 3 m / opt. 4 m 3 m / opt. 4 m 3 m / opt. 4 m

Feed of front edge chain

to center of posts 1.400 mm 1.900 mm 1.900 mm 1.900 mm 1.900 mm

Number of impacts /min 670 - 1450 670 - 1450 530 - 1150 670 - 1450 530 - 1150

Joule: 770 770 850 770 850

Weight of the hammer 76 kg 76 kg 136 kg 76 kg 136 kg

Oil pressure / bar: 190 190 190 190 190

Oil quantity l/min: 80l min¹ 80l min¹ 80l min¹ 80l min¹ 80l min¹

Oil tank / Quantity l: 180 l 180 l 180 l 180 l 180 l

Motor: Hatz 2L 41C Hatz 2L 41C Hatz 2L 41C Hatz 3L 41C Hatz 3L 41C

Power / kw: 24,4 24,4 24,4 34 34

Elektric / V: 12 12 12 12 12

Tank capacity / l: 60 60 60 60 60

Technical Data


HRE 4000 HRE 6000

PB 420 PB 420

Transportlength with Mastl. 3,70m: xxx xxx

Transportlength with Mastl. 4,70m: 5000 mm xxx

Transportlength xxx 6400 mm

Transportbreath: 2000 mm 2100 mm

Transport height: 2500 mm 2500 mm

Weight with hammer 3.800 kg 7.000 kg

Max.L of the posts to be rammed 3 m / opt. 4 m 6 m

Feed of front edge chain

to center of posts 1.900 mm 1.900 mm

Number of impacts/min 530 - 1150 530 - 1150

Joule: 1100 1100

Weight of the hammer 189 kg 189 kg

Oil pressure /bar: 190 190

Oil quantity l/min: 100l min¹ 100l min¹

Oil tank / Menge l: 180l 180l

Motor: Hatz 3L 41C Hatz 3L 41C

Power / kw: 34 34

Elektric / V: 12 12

Tank capacity / l: 60 60

Technical Data


Optionally the HBE 1000 tracked drill carriage may be equipped with a hydraulic dust extraction unit.

The dust extraction unit has the advantage that the entire drillings are sucked off the bore and

collected in a container. Therefore there will be no dust at the bore and the machine and operator

work in a “dust-free” area. After drilling the dust extractor is switched from “suction” to „emptying“ so

that the collected drillings are led for example into a wheelbarrow or similar which has been placed

underneath. At the same time, the filter are cleaned automatically with extraction of the dust

Technical Data:

Drilling depth : approx.1500mm

Drilling diameter

with 4“ hammer : 115mm-205mm

Feed from front edge chain

to centre bore : 1800mm

Torque turn drive approx.1000Nm

Number of impacts in-hole hammer

at 6 bar 1400 1/min


Equipment

Drilling screw Rotary Foundation In-hole-hammer

Drill bits No Skive hose


Driving caps

Post guides

Beacon light

Vario 100-140 Vario 140-200

Work lights grown

Documents

Hydraulic ram unit for piling posts · 2019. 6. 29. · HRE 4000 HRE 6000 PB 420 PB 420 Transportlength with Mastl. 3,70m: xxx xxx Transportlength with Mastl. 4,70m: 5000 mm xxx Transportlength