Embed Size (px)
Citation preview
I I I I I~
' 0
t 0
E ...............
' ........ ........ 0
~ 0
__J
AUDIO SYMBOL LEGEND SYMBOL DESCRIPTION
AM AUTOMATIC MIXER
TSI TELEPHONE SYSTEM INTERFACE
K# RELAY
HPA HEADPHONE AMPLIFlER
~ POWER AMPLIFIER, 70 V, DUAL CHANNEL
MOD MODULATOR
EP EMITTER PANEL
ulu SPEAKER ASSEMBLY:
- SPEAKER
~r~ SPEAKER ENCLOSURE
'0' TRANSFORMER I I L_.:J
GRILLE (V) VOLUME CONTROL
CP# CONNECTION PANEL
TVSS TRANSIENT VOLTAGE SURGE SUPPRESSER
. ~
EQUIPMENT CABINET, SIESMIC RA TED
PR POWER RELAY
PS POWER SUPPLY
/(#)- CABLE, NUMBER INSIDE PARENTHESIS IDENTIFIES QUANTITY IF MORE THAN ONE
PROJECT: -JUDGE GREGG- SHEET TITLE: SHEET NO.
GRAND· RAPIDS AUDIO SYMBOL LEGEND A/Y U.S. BANKRUPTCY COURT FOR THE SCALE: 001 WESTERN DISTRICT OF MICHIGAN NTS
VIDEO SYMBOL LEGEND SYMBOL DESCRIPTION
RS RGBHV SWITCHER
RSA RGBHV SWITCHER W/STEREO AUDIO
SCL SWITCH ER /SCALER
RDA RGBHV DISTRIBUTION AMPLIFIER ANN ANNOTATION SYSTEM
SC SCAN CONVERTER - DUAL OUTPUT
PTR PRINTER, VIDEO
M15 MONITOR, 15"
TP I TOUCH PANEL
cs CONTROL SYSTEM
I CODEC I VIDEO CONFERENCE CODEC
C> CAMERA vs VIDEO SWITCH
PROJECT: -JUDGE GREGG- SHEET TITLE: SHEET NO.
GRAND RAPIDS VIDEO SYMBOL LEGEND A/V U.S. BANKRUPTCY COURT FOR THE SCALE: 002 WESTERN DISTRICT OF MICHIGAN NTS
E c: .3:
I~ _.....,,... l'0
I~ C> C>
ti C> N _.....,,...
l o.: CJ)
E
I.~ lJ_
GENERAL PROJECT NOTES 1. INSTALL ALL ELECTRONIC SYSTEMS EQUIPMENT IN COMPLIANCE WITH
THE MANUFACTURERS WRITTEN INSTRUCTIONS, SEISMIC CODES, AND INDUSTRY WIDE ACCEPTED PRACTICES. SUPPORT EQUIPMENT WEIGHT FROM BUILDING STRUCTURE. DURING THE SUBMITTAL PROCESS, PROVIDE SHOP DRAWINGS WHICH DETAIL PROPOSED MOUNTING AND FASTENERS FOR ALL SUCH EQUIPMENT.
2. PROVIDE MANUFACTURER RECOMMENDED POWER SUPPLIES AND/OR TRANSFORMERS FOR ALL SPECIFIED EQUIPMENT.
3. PROVIDE ALL NECESSARY CABLE AND CONNECTORS TO COMPLETE MANUFACTURER RECOMMENDED CABLE TO EQUIPMENT TERMINATION TO FORM A COMPLETE AND FULLY FUNCTIONAL SYSTEM AS SHOWN. SELECT CONNECTORS WHICH PASS FULL BANDWIDTH CAPABILITY OF SPECIFIED CABLE.
4. PROVIDE PATCH CABLES TO FULLY INTERCONNECT ALL INTENDED EQUIPMENT WITH THE SPECIFIED CONNECTION PANELS, SYSTEM INTERFACES, AND MISCELLANEOUS EQUIPMENT. LABEL ALL PATCH CABLES FOR IDENTIFICATION OF SPECIFIC USE.
5. PROVIDE MANUFACTURER RECOMMENDED, AND INDUSTRY STANDARD, SIGNAL LEVELS THROUGHOUT ENTIRE SYSTEM. PROVIDE ALL REQUIRED DISTRIBUTION AND PROCESSING EQUIPMENT, INCLUDING BUT NOT LIMITED TO SIGNAL DISTRIBUTION AMPLIFIERS, WHETHER SHOWN IN THE SINGLE LINE DIAGRAM OR NOT.
6. PROVIDE RACK MOUNT KITS FOR ALL RACK MOUNTED EQUIPMENT. WHERE MANUFACTURERS DO NOT PROVIDE RACK MOUNT KITS, PROVIDE CUSTOM RACK MOUNT KITS.
7. FILL ALL UNUSED RACK SPACE WITH BLANK/VENT PANELS.
8. PROVIDE UNSWITCHED POWER TO THE CONTROL SYSTEM CARD FRAME. PROVIDE SWITCHED POWER VIA THE SPECIFIED POWER RELAY TO ALL REMAINING VIDEO/CONTROL EQUIPMENT.
9. INSTALL THE SPECIFIED DOCUMENT CAMERA, COMPUTER INTERFACE, TOUCH PANEL, AND MONITOR IN THE GOVERNMENT FURNISHED LECTERN AND /OR A/V CART.
PROJECT: -JUDGE GREGG- SHEET TJTLE: GRAND RAPIDS GENERAL PROJECT NOTES U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SCALE: NTS
SHEET NO.
A/V 003
I I I I I~
' 0
CABLE TYPES AND CONNECTION PLATE (CP) REQUIREMENTS
TYPE FUNCTION DESCRIPTION
M MICROPHONE LEVEL WEST PENN 25291B-22 GAUGE, 1 PAIR, SHIELDED
L LINE LEVEL WEST PENN 25291B-22 GAUGE, 1 PAIR, SHIELDED
v VIDEO (COMPOSITE) WEST PENN 25814-16, RG-59 VIDEO GRADE COAX
s SPEAKER LEVEL WEST PENN 25225B-16 GAUGE, 1 PAIR
UNSHIELDED
x EMITTER PANEL (RF) WEST PENN 25812-RG 58, 50 OHM COAX.
sv S-VIDEO EXTRON 22-123-XX, 2 CONDUCTOR COAXIAL CABLE
c CONTROL CABLE WEST PENN D252402-24 GAUGE, 2 PAIR SHIELDED
RGB RGBHV VIDEO EXTRON 22-020-XX, 5 MINI COAXIAL CABLE, HIGH RESOLUTION
~ 3- M CABLES lcP8I 1- RGB CABLE 2- RGB CABLES 5- L CABLES (DEFENSE ICP9I 1- M CABLE
TABLE ONLY) 2- C CABLES
ICP41 2- M CABLES ~ 3- RGB CABLES 2- C CABLES 1- M CABLE
1- SV CABLE
~ 2- L CABLES
1- RGB CABLE 4- C CABLES 1- M CABLE 1- V CABLE 1- L CABLE
lcP6I 3- M CABLES lcP1ol 1- V CABLE
6- L CABLES
lcP11I 1- V CABLE ICP71 1- RGB CABLE
1- M CABLE 5- L CABLES 4- C CABLES
PROJECT: -JUDGE GREGG- SHEET TITLE: SHEET NO.
GRAND RAPIDS CABLE LEGEND A/V U.S. BANKRUPTCY COURT FOR THE SCALE: 004 WESTERN DISTRICT OF MICHIGAN NTS
I I I I 1~ ~
~ ..--
c 0
~ L.{) 0
h .........
' _J
H 0 ..--
~ d
[]
PROJECT: -JUDGE GREGG- SHEET TITLE: GRAN D RA p I D s COURTROOM FLOOR PLAN U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SCALE: 1 8"=1'-0"
SHEET NO.
A/V 101
I I I I 1·~ ~
1~ O') 0
CAMERA""···
--------x--------------------,..,=-'"~--=~==""--
Ass1 sTE o 'UST£NING EMITTE:R {T'(P)'
.. ·. rro11..---s~Fo=1~S--...... rira=1L_ . · .·· /l~r 1~1 ·. . ll1LJ1 S-. -+-+----------/ /l __ '..I ·· L __ '.J . ' L--'..I .···
SCREEN
· ' "PROJEC r@~s~r@i>.s~@l :======:::::.11 I 8 I l 8 I.· ·· I 8 I , __ , . , __ "',.' .. ('
MAIN EQUIPMENT CABIN.ET £, . .. ... .... . .... • t
rra=1~s--..... fra=11..---s--.....rro11
1~1 i~r l~.J--s---+-+---------L __ '.J L __ '.J L--'..I
PROJECT: -JUDGE GREGG- SHEET TITLE: G RAN D RA p I D s COURTROOM CEILING PLAN U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SCALE: 1 8"=1'-0"
SHEET NO.
A/V 102
I I I I 1·~
£
I~
PROJECT: -JUDGE GREGG- SHEET TITLE: GRAN D RA p I D s CHAMBERS LAYOUT PLAN U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SCALE: 1 8"=1'-0"
SHEET NO.
A/V 103
I I I I
INTERPRETER CONSOLE CONNECTION
~~!E.M~i~~J~L----------------------------- 1 I I
COUNSEL TABLE
(DEFENSE) CPJ
CONTROi.
TELEPHONE LINE >--1'-----f--f'------l
r---' I I
J~~ ,__l,.......Nll/COOEC
L_ _ _J-)--je MATRIX OUT 12
MATRIX OUT 11
MA TRIX OUT 10
I I I I I I I I I I I I I I I I I I I I I I I I I
OSHEET KEYNOTES 1. MIXER OUTPUT TO BE PROGRAMMED FOR
MASKING NOISE llliEN "SIDE BAR CONFERENCE" IS AC TI VA TEO.
2. INSTALL ATTENUATORS ON A RACK PANa INSIDE EQUIPMENT RACK.
3. VOLUME TO HEADSET IS AO.AISTEO THRU CONTROi. SYSTEM PANEL
1---1---1 EP
AUDIO FROM VIDEO SYSTEM
~OGE CP4 f--+---1
CLERK CP4 I---'----!
LECTERN CP9 !---+-----<
cs CONTROi.
AM
2 MATRIX OUT 9
3 MATRIX OUT 1
4
s MATRIX OUT 2
MATRIX OUT 3 7
8 MATRIX OUT 4
9
MATRIX OUTS 10
MATRIX OUT 6
CONTROi.
MATRIX OUT 7
c
0 M,6.TRIX OUT 8
0
TO All EQUIPMENT
120 VAC ~ (T'l'P.)
MOO
CP6
HPA
I I I I I I I I I I I I I I I I I
'-------t--"70:..:.V ________ ._ GAU.£RY
TO AU EQUIPMENT
120VAC ~(T'l'P.) FROM@]~~
I I
~-----------------------------------------~
PROJECT: -JUDGE GREGG-
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SHEET TITLE: AUDIO SYSTEM SINGLE LINE DIAGRAM
SCALE: NTS
(TYP)
SHEET NO.
A/V 601
I I I I I~
' 0 ..--
t 0
' ""'...... ' ........ ........
~ _g
I~ N 0
I~ O'> _,,,-/
I~ (.!)
t") ..... N t") ..q- l.() '°
,..... !XJ O'l 0 ..... N ..... ..... ..... .....
I- I- I- I- I- I- I- I- I- I- I- I-:::> :::> :::> :::> :::> :::> :::> :::> :::> :::> :::> :::>
Cl 0 0 0 0 0 0 0 0 0 0 0 0 x x x x x x x x x x x x
I- a:: a:: a:: a:: ii: a:: ii: a:: ii: a:: a:: a:: :::> I- I- I- I- I- I- I- I- I- I- I- I-0.... <( <( <( <( <( <( <( <( <( <( <( <( z :::::!: :::::!: :::::!: :::::!: :::::!: :::::!: :::::!: :::::!: :::::!: :::::!: :::::!: :::::!:
ATTORNEY DEFENSE 9 x x x x x x x x x ATTORNEY PLAINTIFF 10 x x x x x x x x x LECTERN 5 x x x x x x x x x JUDGE 3 x x x x x x x x x WITNESS 2 x x x x x x x x x CLERK (MIC) 6 x x x x x x x x x CLERK (AUDIO) 7 x x x x x x x x x INTERPRETER 1 x x x x x x x x x REPORTER 8 x x x x x x x x x TELEPHONE A x x x x x x x SIDE BAR CONFERENCE 4 x x x * NOISE GENERA TOR x * VIDEO SYSTEM AUDIO IN C,D x x x x x x x x x VIDEO CONF. CODEC B x x x x x x x x
r;.JOTE: VERIFY FINAL MATRIX MIX DOWN FOR RECORD OUTPUTS WITH THE GOVERNMENT PRIOR TO PROGRAMMING.
* WHEN A "SIDE BAR" CONFERENCE COMMAND IS ISSUED. ROUTE THE AU TOMA TIC MIXERS NOISE GENERA TOR ONLY TO THE 1NDICA TED MATRIX OUTPUT, AND THE SIDE BAR MICROPHONE INPUT TO THE INDICATED MA TRIX OUTPUTS. RESTORE THE ORIGINAL ROUTING COMMANDS WHEN "SIDE BAR" CONFERENCE COMMAND IS TERM I NA TED.
PROJECT: -JUDGE GREGG- SHEET TITLE: AUTOMATIC MATRIX SHEET NO.
GRAND RAPIDS MIXER ROUTING SCHEDULE A/V U.S. BANKRUPTCY COURT FOR THE SCALE: 602 WESTERN DISTRICT OF MICHIGAN NTS
COST SCHEDULE I GOVT ESTIMATE - AUDIO SYSTEM - BANKRUPTCY COURT GRAND RAPIDS - THREE COURTROOMS - FEBRUARY 2005
AUDIO
CLIN KEY ITEM MAKE MODEL QTY UNIT PRICE TOTAL PRICE
1001 Microohone, w/ aooseneck loortablel SHURE MX418D/S w/cord 15 $240.00 $3,600.00
1002 Microohone, w/ aooseneck (fixed/shock) SHURE MX418C5 w/cord 3 $240.00 $720.00
1003 Microphone, Boundary SHURE MX392/C w/cord 3 $200.00 $600.00
1004 Microohone Olrd Pro C.O C-CM series 3 $35.00 $105.00
1005 Multi-inout Adaotor Em tech EJ-8 3 $165.00 $495.00
1006 Boom Heedset llnteroreterl Sennheiser HMD25 3 $350.00 $1,050.00
1007 Headohones IReoorterl Sennheiser HD-25 SP 3 $90.00 $270.00
1008 HPA Headphone Ampifier Radio Desian ST-SH2 6 $105.00 $630.00
1009 AM Mixer, Automatic PoWcom EF2280 6 $3,570.00 $21,420.00
1010 PA Power Ampifier QSC ISA-300T 3 $630.00 $1,890.00
1011 Speaker, w/transformer & Grille Soundoier C803A-T87 IT720-8A 57 $72.00 $4, 104.00
1012 v VoiJme Olntrol Soundoier AT Series 15 $20.00 $300.00
1013 TSI Telephone Svstem Interface PoWcom EF2201 3 $765.00 $2,295.00 1014 MOD Listening/Translation System Sennheiser Provide one modulator 3 $2,600.00 $7,800.00
EP with two emitter panels. {2)SZl1015T/NT,(1)Sl101 5/NT {Powered thru coax)
1015 Listening/Translation Receivers Sennheiser Provide 3 each HDI 302 9 $225.00 $2,025.00 units with charger for each room.
1016 VCA Voltaae Olntrolled Ampifier Radio Desian ST-VCA2 3 $150.00 $450.00
1017 PAD Line to MIC Attenuator Radio Desian STP-1 15 $60.00 $900.00
1018 Bridaina Isolation Tran stormers Shure A 15BT 15 $65.00 $975.00
1019 C.Ontrol Panel, Interpreter Custom 3 $360.00 $1,080.00
1020 TP Touch Panel, C.Obr (Black) AMX AXT-CV10 6 $3,850.00 $23,100.00
1021 TP Touch Panel, C.Obr {Black) AMX AXT-CV6 3 $2,400.00 $7,200.00
1022 cs Main Olntrol System AMX Acent3 Pro 3 $1,350.00 $4,050.00
1023 C.Ontrol card AMX AXC 12 $385.00 $4,620.00
1024 Power Relay AMX PC1/PC2 9 $540.00 $4,860.00
1025 Programming {Lot) AMX See Soecs 3 $0.00 $0.00
1026 TVSS Transient Voltaoe Suroe Supp. Tripplite IBAR 12 Ukra 6 $100.00 $600.00
1027 CP# Connection Panel-' Custom 42 $150.00 $6,300.00 1028 Equipment Rack Middle Atlantic WRK 44SA-32 with CBS- 3 $1,200.00 $3,600.00
WRK-32 caster option. Provide with power strip, vent and blank panels,sheMng, and
1029 Total Misc. 3 $500.00 $1,500.00 1030 Cable, Connectors {Lot) West Penn, Belden Plenum audio cable WP 3 $850.00 $2,550.00
25291, Speaker cable WP 25225B, Olntrol cable Belden 1585A
SUBTOTAL $109,089.00
3001 TOTAL LABOR $34,500.00
4001 TRAVa $17,400.00
ROOM TOTAL $160,989.00
COST SCHEDULE I GOVT ESTIMATE - VIDEO/CONTROL SYSTEM - BANKRUPTCY COURT GRAND RAPIDS - THREE COURTROOMS - FEBRUARY 2005
VIDEO
CLIN KEY ITEM MAKE MODEL QTY UNIT PRICE TOTAL PRICE
1040 SCL Switcher/Scaler Extron DVS406 3 $2,425.00 $7,275.00
1041 RSA RGBHV Switcher w/audio Extron Svstem 10 3 $2,500.00 $7,500.00
1042 RS RGBHV Switcher Extron SW2VGArs 6 $345.00 $2,070.00
1043 RDA RGBHV Distribution Amplifier Extron P/2 DA2xi 3 $175.00 $525.00
1044 RDA RGBHV Distribution Amplifier Extron P/2 DA4 PLUS 6 $380.00 $2,280.00
1045 RDA RGBHV Distribution Amplifier Extron P/2 DA6 PLUS 3 $450.00 $1,350.00
1046 SC Scan Converter - Dual Output Extron VSC500 3 $975.00 $2,925.00
1047 CP#4A Connection Panel w/computer int Extron RGB460xi 9 $575.00 $5, 175.00 Cl-5BWPA w/ power
1048 CP#3B Connection Panel w/computer int FSR supply 9 $230.00 $2,070.00 Included on Audio
1049 CP# Connection Panels Custom Schedule 42 $0.00 $0.00
1050 Annotation System Boeckeler PVl-83D w/COM4 3 $3,450.00 $10,350.00
1051 DC Document Camera Wolfvision VZ9 3 $5,415.00 $16,245.00
1052 M15 Monitor, 15" (Black) Viewsonic VG 150 12 $500.00 $6,000.00
1053 M15 Monitor, 15" Touch Screen (Black) ELO Trimline 15.1 6 $860.00 $5,160.00 Video Projector NEC MT1065 w/ Mt60-26ZL
1054 lens 3 $6,950.00 $20,850.00 Projection screen Stewart VE090V w/ Greyhawk
1055 material 3 $2,275.00 $6,825.00 Video Conferencing CODEC Polycom VS4000 w/BRI module
1056 and NT4 3 $10,400.00 $31,200.00
1057 Video Conferencino Camera SONY EVl-D100 6 $950.00 $5,700.00
1058 vs Video Switcher Extron SW4AV 3 $550.00 $1,650.00
1059 PTR Printer Olympus P330 3 $490.00 $1,470.00
1060 Power Seauence Controller Middle Atlantic USC-6R 3 $360.00 $1,080.00
1061 Misc. Interface (Lot) Custom Lot 3 $600.00 $1,800.00 1062 Cable Extron, Covid, Belden Plenum rated. Covid 3 $5,500.00 $16,500.00
3800 (RGBHV), Covid 3240 (S-Video), Belden 88281 (Video), Belden 1585A (Control)
1063 Connectors, Lot Misc Lot 3 $600.00 $1,800.00
SUB TOTAL $157,800.00
3002 TOTAL LABOR $55,500.00
4002 TRAVEL $28,200.00
ROOM TOTAL $241,500.00
I I J
I
·~ n
LECTERN
JUOGE'S BENCH
CLERK
TP
TP
TP CP4
EQUIPMENT RACK ,-------------1
cs
SERIAL RSA
SERIAL RS
SERIAL RS
SERIAL SCL
CONTACT K1
CONTACT K2
SERIAL AM
SERIAL TSI
SERIAL
RELAY PR
TYP. SERIAL
SERIAL t-==----; vs
SERIAL
TYP.
TO ALL EQUIPMENT
I 120VAC~ I (TYP.)
I TO ALL I EQUIPMENT
: 120VAC~ I (TYP.) (TYP.) I L _____________ J
PROJECT: -JUDGE GREGG- SHEET TITLE: G RAN D RA p I D s CONTROL SYSTEM DIAGRAM U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SCALE: NTS
1111"\f'r f'nr"" I r11rl"'T T1T1 r.
CP9A
SHEET NO.
A/V 603
I C'LJC:-LT ~If\ I
I I I I I~
' C>
t C>
11 ' ~ c
0 _J
R """""
' ;:;_.
I R c:
·31:
I~ ~ 01
I~ C> N
I§ N ,,/'
I~ E 0
I~
SINGLE CONNECTOR
FROM MIC / ELEMENT
INTERPRETER'S CONTROL PANEL ENCLOSURE ,------------1 I MUTE SWITCH (SHORT I I PINS 2 & 3 WHEN MUTED) I I r--------, I
,----- SINGLE CONNECTOR
I I I I \ I I ~ l I IA\ ... TO AUDIO
I I I SWITCHER, TYP. I ~--------~
~~E~~ETR HEADPHONE • I I : I I < FROM HEADPHONE AMP LEFT
TO RIGHT HEADPHONE • t;' '1 I I ( FROM HEADPHONE SPEAKER \ AMP RIGHT
HEADSET VOLUME CONTROL
r--------1
: } ___ , :
- TO INPUT PIN 1
I I± I I I UP I El-I --1--1 -1--r---<( FROM MIXER INPUT I L J I I CONNECTOR (GROUND I r-=== i I I TERMINAL)
I DOWN l l I I I Ll ___ J I I I I I I I I L ________ J I
I
TO INPUT PIN 2
v L ____________ J
PROJECT: -JUDGE GREGG- SHEET TITLE: SHEET NO. G RAN D RA p I D s INTERPRETER'S CONTROL PANEL DIAGRAM A/V
604 U.S. BANKRUPTCY COURT FOR THE SCALE: WESTERN DISTRICT OF MICHIGAN NTS
---------~---~----File name: P:\2003\20030793\ 1 Drawings\AV GREGG\93AV605.dwg Last Plotted: 05/24/L'.004 @ 10:31 By: me1
~c,-..-o rrl . ..... .I :::0 (/) y>..,.., 0 -I ~c_
rrl ClJ )> ,.,, :::0 )> (")
z ~ :z:: ;-:i 0 :::0 r---1 (/) c "---J -I -0 :::0 -I (") (") ..,.., -I -< ~ 0 ('") )>-.., ~ -0 :s:::: ;:o -('") -I 0 ::r: -., (/) I -o c_ C') ;:o c )> 0 z -I C')
::r: rrl rrl
(./)
z s;? -I I (/) !1:1
C') :::0 rrl C') C') I
(/)
- ::r: z rrl
rrl~ ::::0 -0 -I ::::0 -I ~::;:; rrl .. ::::0 (/)
('") 0 z -I ::::0 0 I
~ z rrl I
0
~ I
(/)
en J>-- ~ o~~ U1<:z
0
•ON MUTE
v APPROX. 4" f ~
APPC-1 El I 3"
L......,_____.___
2 POSITION PUSH BUTTON TYPE SWITCHES
SLANTED FACE ALUMINUM OR STEEL BOX WITH A BLACK POWDER COAT
RUBBER FEET, TYPICAL
2" J "
HEADPHONE WITH BOOM MIC
MUL Tl-PIN, AMPHENAL TYPE CONNECTOR TO MATE TO Q
25' CABLE
MATING CONNECTOR
I I I I I~
' 0
~ ~
l.()
' a! c
_J
I~ tO 0
' :;;.. I R c::
~ :.,......--,....., O'>
I~ 0 N
I§ N /'
I~ E c
I~
COUNSEL TABlE
COUNSEL TABLE
JUDGE
Cl.ERK
REPORTER
f<lY!~~L~~-----------------------------------1 I I I I I :
t-------<J
,INY~HY I 14
,lrsgmy I Is
RSA
(COMPUTER)
(SVCR) SCI.
ANN
RS
RDA
RDA
I I I I I
l.ECTERN I CP9A
RGBHV I (DOC CAM) 8
JUDGE
Cl.ERK
Cl.ERK
'MTNESS
A TIORNEY T ASL£
A TIORNEY T ABL£
L£CTERN
1---------..;~-------i CP8 I PRO.ECTOR
l----------'-------lCP8 I GALLERY 2
RDA
J i---------..._------tCP8 I GALLERY
CAMERA (TYP.) CJ I I
~------i SC t----------------'
TO AU EQUIPMENT
120VAC~ (TYP.)
TO AU EQUIPMENT
120VAC~ (TYP.) (TYP.)
I I I I I I I I I I I
L-----------------------------------------~
PROJECT: -JUDGE GREGG-
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SHEET TITLE: VIDEO SYSTEM SINGLE LINE DIAGRAM
SCALE: NTS
SHEET NO.
A/V 606
I I I I I~
' 0 .....--
I: 0 0
ti .............
·~ ......... .........
I~ 0
_J
1-i r-0 c.o
I~ ;;;-.
I~ (.'.)
>
I{ c ·~
I~ ./"' I"'")
I~ 0 0 N
I§ N 1: E 0
I~
COUNSEL TABLE
COUNSEL TABLE
EQUIPMENT RACK (Sf)_ - - - - - - - - - - - I r---1 I
I I I I I I I
JUDGE 1CP4A~--ll-------_.'..J
2 CLERK 1CP4Ar---+-----_::J
3 REPORTER 1CP4Ai--'i-------..::'....l
4
5
I (COMPUTER) 6
LECTERN ICP9A (S-VHS) 7
(VIDEO) 8
RSA
I I I I I I I I I I
1------7 TO AUDIO I MIXING SYSTEM
120 VAC
FROM~
TO ALL EQUIPMENT
I I I I I I I I I I I I I I I I I I I
L-----------------~
PROJECT: -JUDGE GREGG- SHEET TITLE: AUDIO PORTION OF
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
VIDEO SYSTEM SINGLE LINE DIAGRAM
SCALE: NTS
SHEET NO.
A/V 607
.
••
-®
----. -• ---.......
0
~ ;;;..
• (.'.)
R c::: ·~
, I~ ~ I"'")
I~ 0 0 N
I~ N ~
I~ E 0
I~
HD15 TYPE~ 0 COMPUTER
CONNECTOR INTERFACE
RGB
MINIPHONO~ TYPE CONNECTOR o
MONITOR
0
0 AUDIO
9 MIC
I~ 0
___J
0 0
3-PIN XLR TYPE CONNECTOR (TYP)
INTERPRETER'S CONNECTOR (MUL Tl-PIN) THAT MATES WITH CONSOLE (DEFENSE TABLE ONLY)
FLOOR PANEL (CP3A) DETAIL
0
0
POWER/ AUDIO IN SIGNAL
L@ L0
0
CP38
TABLE PANELS PROJECT: -JUDGE GREGG-
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
~ 0
MONITOR -
CP3
(CP3L3B) SHEET TITLE:
3-PIN XLR TYPE CONNECTOR
HD15 TYPE CONNECTOR
DETAILS SHEET NO.
CONNECTION PANEL DETAILS A/V 101 SCALE:
NTS
.
••
-®
----. • •
----~
•
•
E c .3:
I~ ~ !"")
I~ 0 N
~ N ~
I~ E 0
I~
~----HD15 TYPE -------~----... CONNECTOR
0 0 H. SHIFT BUFFERED
@) ~ POWER
AUDIO
@ INPUT
o \ ·:·:·:·:·: Io
~~gggl MAC 13 • 1 l:ID PIN 11
VGA/MAC I ID PIN 4 LOCAL OUT
0 0
CP4A
0 0 TOUCH
MONITOR ------
MIC SIDEBAR
~[§ 0 0
CP4
4-PIN XLR TYPE CONNECTOR
LABEL READS "AUDIO" FOR CLERK PLATE
(2) 3-PIN XLR TYPE CONNECTORS
PLATES FOR JUDGE AND CLERK (CP4.L4A) DETAILS
e
~ xx xx
~
LABEL AS DIRECTED BY GOVERNMENT, TYP.
e RECORD OUTPUT PANEL
~ ~ xxxx COMPLETE
MIX
~ [QJ
3-PIN XLR-M TYPE CONNECTOR (TYPICAL)
REPORTER
e RECORD OUT LEvt:L
D MIC -=--
0 HEADPHONE
-e
3-GANG PLATE
PUSH-ON/PUSH-OFF DPDT SWITCH
PHONO TYPE MATING CONNECTOR TO MATE HEADPHONE CONNECTOR
FLOOR PANEL (CP6) DETAIL PROJECT: -JUDGE GREGG- SHEET TITLE: GRAND RA p IDs CONNECTION PANEL DETAILS U.S. BANKRUPTCY COURT FOR THE SCALE: WESTERN DISTRICT OF MICHIGAN NTS
SHEET NO.
A/V 702
I I I I I~
' 0 ..--
t 0
E L{')
' ......... I! ..3
I~ I"'") 0
ti ;;;.. (.!)
I~
R c:: ·~
! I~ _.,,.,.,... I"'") Ol
I~ 0 N
I~ N _.,,.,.,...
I~ E 0
I~
0
0
-~ 1~1 O••T 0
MONITOR 0 \ :•:•:•:•:• / 0
0
WITNESS PLATE
1 GANG, ANNODIZED ALUMINUM PLATE. GOVERNMENT TO SELECT COLOR. 0
0
DB9M TYPE CONNECTOR
3-PIN XLR TYPE CONNECTOR
INTERPRETER'S CONNECTOR, MUL Tl-PIN AMPHENOL THAT MA TES WITH CONSOLE
HD15 TYPE CONNECTOR
(CP7) DETAIL
ENGRAVED TEXT FILLED WITH CONTRASTING COLOR, TYP.
HD15 TYPE CONNECTOR
CONNECTION PANEL (CP8) DETAIL PROJECT: -JUDGE GREGG-
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SHEET TITLE: CONNECTION PANEL DETAILS
SCALE: NTS
SHEET NO.
A/V 703
I I I I I~
' C>
~ ~
L.{)
' ........ 0 c _g
I~ ..::to
I 0)
/"'
d R c .3:
I~ ,..-1""") 0)
I~ C> N
~ N
t E 0
I~
LECTERN
MINI PHONO TYPE CONNECTOR
0
0
TOUCH I~ PANEL~
0
0
MICI~ 0
0
4-PIN, XLR-F TYPE CONNECTOR
3-PIN XLR-F TYPE CONNECTOR
PANEL (CP9) DETAIL
3-PIN XLR TYPE CONNECTOR
S-VIDEO TYPE CONNECTOR
HD15 TYPE I'' ' CONNECTORS \:'\. 0 I / 0
0
089F TYPE CONNECTOR
~ 0
AUDIO
ANNO
F-TYPE CONNECTOR
DC CONTROL
0
RCA TYPE CONNECTORS
LECTERN (FLOOR) (CP9A) DETAIL PROJECT: .-JUDGE GREGG-
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
SHEET TITLE: CONNECTION PANEL DETAILS
SCALE: NTS
SHEET NO.
A/V 704
I I I I f.
d5'
1 GANG, ANNODIZED ALUMINUM PLATE. GOVERNMENT TO SELECT COLOR.
ENGRAVED TEXT FILLED WITH CONTRASTING
0 / COLOR, TYP.
/ I ~BNC TYPE VIDEO PRINTER V CONNECTOR
@?
CONNECTION PANEL (CP10) DETAIL
PROJECT: -JUDGE GREGG- SHEET TITLE: GRAND RAPI OS CONNECTION PANEL DETAILS U.S. BANKRUPTCY COURT FOR THE SCALE: WESTERN DISTRICT OF MICHIGAN NTS
SHEET NO.
A/V 705
I I I I I~
' C>
0 0 0
~
0 0
~ TOU~[§ PANEL o o
(SPACE FOR 0
VOICE/DATA
~ CONNECTIONS)
MIC[§ 0 0
- -0 0
0 0
- -
0 0
01onvG a~© 0 000000000 0 0 ·:·:·:·:·: 0
01onvGa~-O ONN't'
01onv
!KlllNOl'I
[§ 1'3M0d
@ 0 o
0o
0o
0o
0o 0 0 ·:·:·:·:·: 0
10lilNO:> :>O nv:> :>ea 0 ·:·:·:·:·: 0 00!1
J:l't' .:RGI.NI !13J.Odno:>
0 0
0 0 0
0 0 '
PROJECT: -JUDGE GREGG- SHEET TITLE:
GRAND RAPIDS FLOOR BOX PLATE DETAILS - LECTERN
U.S. BANKRUPTCY COURT FOR THE SCALE: WESTERN DISTRICT OF MICHIGAN NTS
CP9
CP9A
SHEET NO.
A/V 706
c9 6
0 0 0
0
~ (SPACE FOR VOICE/DATA
~ CONNECTIONS)
0
- -0 0
0 0
- -0 0 0
~ 0 o[ .... "\o ..... ..... ~OllNOrl
!NI
~3MOd Olrl
~ @
~ 0 [ ...•• } 0 ..... .....
~~ 01onv
0 0 30V.:1~31NI 0 ~3lndrlOO
0 0 0
0 0
PROJECT: -JUDGE GREGG- SHEET TITLE: SHEET NO.
GRAND RAPIDS FLOOR BOX PLATE DETAILS - COUNSEL A/V U.S. BANKRUPTCY COURT FOR THE SCALE: 707 WESTERN DISTRICT OF MICHIGAN NTS
I I I I I~
t. C> ....-
t C>
~ .............
~ Q)
:::::
I~ _g
I~ CXJ C>
I~ m .,,..,,,
I~ <.!:>
R c -~
I~ .,,..,,, l'0
I~ C> C>
I~ C> N .,,..,,,
I~ Q)
E
·~
PROJECT: -JUDGE GREGG- SHEET TITLE: GRAN o· RA p 1 o s ATIORNEY's TABLE DETAIL
U.S. BANKRUPTCY COURT FOR THE SCALE: WESTERN DISTRICT OF MICHIGAN NTS
x 0 CD a::: 0 0 ....J LL.
SHEET NO.
A/V 708
I I I I I~
t 0
>-<( __J
0... (/) -a::: 00 o!:: wz oo 5::::?;
I ...J uw :::>Z Q<( I- a..
z a::: ~ u w __J
la::: <( u
<:. <(
-~'-' _/
PROJECT: -JUDGE GREGG- SHEET TITLE: GRAND RAP I OS LECTERN CABLE DETAIL U.S. BANKRUPTCY COURT FOR THE SCALE: WESTERN DISTRICT OF MICHIGAN NTS
x 0 £D
a::: 0 0 __J LL.
SHEET NO.
A/V 709
F~am~:\2Jo~2om93\1Drawings\Av GRE~G\9'!'710.dwg La,,lott:f'os~oo!'r 1o~By: ~ - - -;:EC~-0 rrl . \.I J ::::0 (/) y> -r"'I 0 --i ;\,Jc._ rrl (JJ ..,___ rrl ::::0 )> _,,__ ('")
:z: ~ :z: ;-;-i 0 ::::0 r--'1 (/) c ~ --i -0 ::::0 --i ('") ('") -r"'I --i -< ;\,J
0 ('") )::> ..,., § -0 s:::: ::::0 -('") --i 0 :::r: ..,., (./) I - 0 c._ G'") ::::0 c )> 0 :z: --i G'")
:::r: rrl rrl
(/)
:z: s; --i I (/) ~
G'") ::::0 rri G'") G'")
I
('") (/) 0 :::r: :s:::: rri
~~ --i --i rri -::::0 r=' - rri :z: .. --i rri ::::0
~ ('") rri
0
~ I
I
I rri ('") --i rri ::::0 :z:
(/)
"'-J )::> ~ --'-.......~ O<:z
0
EXTRON RGB 168xi~
.,_ ,.--:-::-:-INPUTS~ ~~ BUFFEREDLOCAL
-¢- AUOKl A~:~~ ~ ~ MONI:~: ~~TPUT
• 15' o r.::::::::l o rnm o r:::::;1 o ~~E.J~
0 MINIMAX
• H. SHIFT
e~DEDe:urnoeR
o-~DeUDIDeR
NOTE: PROVIDE "LEFT" AND "RIGHT" AUDIO SUMMING FOR BOTH VIDEO AND S-VIDEO AUDIO INPUTS. FLOOR PLATE HAS A SINGLE CHANNEL AUDIO CONNECTOR FOR EACH.
UNSWITCHED
~ 100·240V - SA MAX.
COMPUTER INTERFACE - LECTERN MOUNTED
-
-----------~--File name: P:\2003\20030793\ 1Drawings\AY GREGG\93AV711.dwg Last Plotted: 05/24/2004 @ 10:32 By: mei - - -::::E c ~ -0 fT1 • \.I .I ::::0 (/) y> """'T"'I 0 -I /\.Jc_ fT1 CD ..,.__ r'1 ::::0 )> .>-- (") :z~:z:::-:i 0 ::::0 ,......, (/) c '--.J -1-0 ::::0 -I 0 (") """'T"'I -I -< /\.J
0 (") )>-., ~ --0 s:: ::::0 -(")-I 0 :r: -., (/) I - 0 c_ G') ::::0 c )> 0 :z -I G')
:r: rri rri G')
(/)
:z s;;? -Ir(/) ~
::::0 rri G') G')
I
(/) :r:
(/) rri
§5~ ~-I (") -I r11 I
rri
~··
~ ~ 0
~ I
c_ c 0 G') rri
(/)
..........i._)>- ~ ~~~ ~<:z
0
DESK GROMMET (TYP)
SURFACE RACEWAY CONNECTION
PLATES (TYP)
BACK SPLASH
COUNTER
POWER TO BE PROVIDED IN SECOND RACEWAY IF MORE OUTLETS ARE REQUIRED
SURFACE~ ~ [DJ
N 0
RACEWAY
RAISED FLOOR W/ ACCESS PANEL
FLOOR PULL BOXES (NOT FSR TYPE)
JUDGE'S BENCH
® ®
RAISED FLOOR PENETRATION
RAISED FLOOR
CONDUIT IN CONCRETE SAWCUT (Typ)
CONCRETE SLAB
AREA
-
-----------~--File name: P:\2003\20030793\ 1 Drawings\AV GREGG\93AV712.dwg Last Plotted: 05/24/2004 @ 10:32 By: mei - - - -:::E c: ~ -0 rr1 • \.I .I ::::0 U) y> -r-10 --; ""-J c_ rr1 OJ .....__ rr1 ::::0 )> _,_.- (")
:z ~ :z:: :-:-i 0 ::::0 CJ U) c: --; -0 ::::0 --; (") (") -r-1 --; -< ""-J
0 (") )>., ~ -0 :s::::::::o-(") --; CJ I'lt'°'I -Q\Jlc_ C) ::::0 c: )> 0 :z --; C)
I rr1 rr1
C) ::::0 rr1 C) C)
I
U) U) (") I :z )> ,..,,
--; I rr1 U) ~ --;
--; --; I ~
0
~ I
I en c: (") ::::0
~~ ::::0 (") ::;s;::: ,..,,
:E ::::0 _)> --; (") :z ,..,, rr1 :::E (/) )> (/) -<
(/)
-........) )>- ~ ~'-....._!:!
N<z 0
DESK GROMMET (TYP)
SURFACE RACEWAY
~
(.!)
(.J1
CONCRETE SLAB
CONNECTION PLATES (TYP)
MUL Tl-OUTLET---RACEWA Y
CONDUIT IN CONCRETE SAWCUT (TYP)
FLOOR PULL BOXES (NOT FSR TYPE)
BACK SPLASH
COUNTER
POWER TO BE PROVIDED IN SECOND RACEWAY IF MORE OUTLETS ARE REQUIRED
~ COJ
CLERK AND WITNESS DESK
I I I I I~
FINISHED CEILING
CONDUIT ---+--'
JUNCTION ----1---BOX
COAXIAL CABLE
COVER PLATE W/CENTER PENETRATION FOR CABLE EXIT
WALL
PROJECT: -JUDGE GREGG-
G RAND RAPIDS U.S. BANKRUPTCY COURT FOR THE WESTERN DISTRICT OF MICHIGAN
WALL MOUNT BRACKET
EMITTER PANEL
SHEET TITLE: EMITTER PANEL MOUNTING DETAIL
SCALE: NTS
SHEET NO.
A/V 713
I I I I I I I I I I I I I I I I I I I
2. The Government requires manufacturer's original specification tests. The Government will evaluate and approve the substitutions.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine conditions, with the Installer present, for compliance with requirements and other conditions affecting the performance of the systems work.
B. Do not proceed until unsatisfactory conditions have been corrected.
3.2 INSTALLATION
A. General: Wire all systems in accordance with Standard Broadcast Practices and the National Electrical Code, NFPA, SMPTE, NAB, UL, EIA, FCC, NTSC, Design and Installation (SAMS) and any other authority having jurisdiction. When a conflict occurs, follow that most stringent (which is generally recognized to be the most costly) requirements. Refer to schematic and block diagrams.
B. Control System Programming Outline: Provide complete control system programming services including but not limited to the creation of custom software required to meet all contract document requirements including but not limited to the programming outline specified below. Include manufacturer direct services and on site support. Please note that not all equipment, functions, and/or controls may not be specified or required for all rooms. Program software based on the following programming outline as applicable to individual single line diagrams identified in the accompanying drawings.
1. SYSTEM ACTIVATION: When the AN system has been deactivated by the system off button, or when the touch panel has entered its "time out" mode, display the following message on the touch screen: "TOUCH SCREEN TO ACTIVATE". This message will remain constantly on, and shift positions if recommended by the manufacturer to prevent burn in.
2.
3.
BUTTON HIGHLIGHTING: When any button is engaged on any touch panel control page, that button shall be highlighted for the duration of physical contact between the finger and touch screen. In addition, when any system function is activated/selected, the button will remain highlighted to identify the active status of the control system. In addition, comply with additional button highlighting requirements stated in the programming outline.
ICONS: The programming outline is a written description of buttons, pages, and commands. Even though the buttons are described with words, it is required that the installer make a reasonable use of icons when programming the touch panel pages.
4. GREETING PAGE: Upon first touching the screen a GREETING PAGE shall be displayed. This page will contain the court's seal, a welcome message, the DATE, the TIME, and SYSTEM ON button.
a. BUTTON - SYSTEM ON: Selecting will bring up the Post Greeting Page, with common button bars. In addition, selecting will energize the power controllers at the equipment rack witb a 3 second delay between them. The last power controller circuit turned on shall be the audio amplifiers. In addition, all AN applicable system parameters shall be set to default values. As an example only, without implying limitation, all volume levels shall be set to default values; the audio and video mutes shall be disengaged if previously left on; etc ....
VIDEO AND CONTROL SYSTEMS 13136 - 6
I I I I I I I
I I I I I
I I
I I I I I
5.
6.
7.
POST GREETING PAGE: The Post Greeting Page will contain the Common Button Bar and the court's seal.
COMMON BUTTON BAR (top of page): With the exception of the greeting page, all control system touch panel pages will contain all "common button bar(s)" for the purpose of allowing access to fundamental control functions from any location in the touch panel page/software program. When a button in the common button bar group is selected, that button shall become highlighted, and remain highlighted until interaction with the corresponding page is terminated. At a minimum, without implying limitation, the common button bar shall contain the following:
a. BUTTON - AUDIO: Selecting brings up the audio control page. b. BUTTON - VIDEO: Selecting brings up the video control pages. c. BUTTON - TELE-CONFERENCING: Selecting brings up the tele-conferencing
d.
e.
f. g.
control page. BUTTON - VIDEO CONFERENCING: Selecting brings up the video conferencing control page. BUTTON - SYSTEM OFF: Selecting shall display a text prompt asking "Are you sure?" with buttons YES, and NO. IF YES, the system shall power off the AC power controllers in reverse order of turn on, turning the audio amplifiers off first, followed, three (3) seconds later, by the rest of the designated AN equipment. IF NO, the system shall return the touch panel back to the previous page with no action taken. DISPLAY - DATE: Will display the correct date. DISPLAY - TIME: Will display the correct time of day.
AUDIO CONTROL PAGE:
a. BUTTON - MEDIA SOURCE VOLUME UP: Selecting shall increase the output level of the media source electronics. Minimum and maximum levels shall be programmed into the volume control which shall prevent feedback. Button shall operate incrementally and continuously. When selected incrementally, the volume shall increase incrementally within the preprogrammed minimum and maximum parameters. When touched continuously, the volume shall increase continuously within the preprogrammed minimum and maximum parameters. If the media source electronics were muted prior to selection, disengage the mute function, display the bar graph, and engage the volume up control.
b. BUTTON - MEDIA SOURCE VOLUME DOWN: Selecting shall decrease the output level of the media source electronics. Minimum and maximum levels shall be programmed into the volume control which shall prevent complete inaudibility. Button shall operate incrementally and continuously. When selected incrementally, the volume shall decrease incrementally within the preprogrammed minimum and maximum parameters. When touched continuously, the volume shall decrease continuously within the preprogrammed minimum and maximum parameters. If the media source switching electronics were muted prior to selection, disengage the mute function, display the bar graph, and engage the volume down control.
c. DISPLAY - MEDIA SOURCE VOLUME UP AND DOWN BAR GRAPH: Bar graph shall be continuously displayed adjacent to volume up and down buttons. Bar graph shall graphically display the window between the preprogrammed minimum and maximum volume settings. The bar graph shall be divided into a minimum of 10 segments which shall incrementally or continuously appear or disappear according to the volume button selected. The bar graph display shall be removed from the screen when the mute function is selected. The bar graph shall be restored to its previous setting when the mute function is toggled off.
d. BUTTON - MEDIA SOURCE MUTE (Toggle function): Selecting shall highlight and flash the button, and mute the output of the media source electronics. Mute shall be defined as a minimum 60 dBA decrease in sound pressure level. Bar graph display shall be removed. Selecting again will discontinue button flash and highlight, un-
VIDEO AND CONTROL SYSTEMS 13136 - 7
I I I I I I I I I I I I I I I I I I I
8.
e.
f.
g.
h.
mute the media source electronics, and the bar graph display will be restored showing its previous setting. BUTTON-AUDIO SYSTEM MUTE (Toggle function): Selecting shall highlight and flash the button, and mute all audio system inputs and outputs such that no audio in audible or recordable. Mute shall be defined as a minimum 60 dBA decrease in sound pressure level. Selecting again will discontinue button flash and highlight, and will un-mute all audio system inputs and outputs. An alternative to this is the JUDGE OVERRIDE. This mutes all inputs EXCEPT the Judge's microphone. BUTTON - BENCH CONFERENCE (Toggle function): Selecting shall highlight and flash the button, mute all court PA microphones, un-mute the judge's bench conferencing microphone, and shall switch the jury speakers to receive masking noise. Selecting again will discontinue button flash and highlight, un-mute all court PA microphones, mute the judge's bench conference microphone, and switch the jury speakers back to court system output. BUTTON - EXTERNAL SPEAKERS (Toggle function): Selecting shall highlight and flash the button, and mute all speakers located outside of the courtroom. Selecting again will discontinue button flash and highlight, and un-mute all speakers located outside of the courtroom. BUTTON - CLOSE: Selecting will close the Audio Control Page, and return the user to the Post Greeting Page.
VIDEO CONTROL PAGE: The Video Control Page will identify with separate buttons, all possible video input locations in the court, including the judge's bench, clerk's work area, lectern, and each attorney table. Each button will function as specified below.
a. BUTTON - JUDGE'S BENCH: Selecting will bring up a pop-up window containing icon buttons for each input source available at the judge's bench. In addition, a button will be provided to switch the judge's monitor between his/her own CPU and the video system output. The pop-up window will time out, and be removed from the screen 10 seconds after a control command. In addition, a CLOSE button will be provided to remove the pop-up window from the screen.
b. BUTTON - CLERK'S WORK AREA: Selecting will bring up a pop-up window containing icon buttons for each input source available at the clerk's work area. In addition, a button will be provided to switch the clerk's monitor between his/her own CPU and the video system output.
c. BUTTON - LECTERN: Selecting will bring up a pop-up window containing icon buttons for each input source available at the lectern, including the document camera. The pop-up window will time out, and be removed from the screen 10 seconds after a control command. In addition, a CLOSE button will be provided to remove the pop-up window from the screen.
d. BUTTON -ATTORNEY TABLE - PROSECUTION: Selecting will bring up a pop-up window containing icon buttons for each input source available at the attorney table. The pop-up window will time out, and be removed from the screen 10 seconds after a control command. In addition, a CLOSE button will be provided to remove the pop-up window from the screen.
e. BUTTON -ATTORNEY TABLE - DEFENSE: Selecting will bring up a pop-up window containing icon buttons for each input source available at the attorney table. The pop-up window will time out, and be removed from the screen 10 seconds after a control command. In addition, a CLOSE button will be provided to remove the popup window from the screen.
f. BUTTON - CLOSE: Selecting will close the Video Control Page, and return the user to the Post Greeting Page.
In addition, the Video Control Page will contain a Common Button Bar for video related functions. The Common Button Bar will be located on the left side of the page, and will contain the buttons specified below.
VIDEO AND CONTROL SYSTEMS 13136 - 8
I I I I I I I I I I I I I I I I I I I
C.
D.
E.
F.
g.
h.
BUTTON - MONITORS OFF (toggle function): Selecting shall highlight and flash the button, and will route a dead signal (Black) to all monitors except the Judge's Bench areas. Selecting again will discontinue button flash and highlight, and will route regular output of the video system to all monitors. BUTTON - DOC CAMERA CONTROLS: Selecting brings up a pop up window with all appropriate document camera controls. At a minimum, without implying limitation, provide all buttons necessary to control the selected device/system. As a general rule, provide touch panel buttons which mimic those buttons provided in/on the device/system front panel, remote control device, and/or control software. The popup window will time out, and be removed from the screen 10 seconds after a control command. In addition, a CLOSE button will be provided to remove the pop-up window from the screen.
9. TELE-CONFERENCING PAGE AND VIDEO CONFERENCING PAGES:
a.
b.
BUTTONS -At a minimum, without implying limitation, provide all buttons necessary to control the selected device/system. As a general rule, provide touch panel buttons which mimic those buttons provided in/on the device/system front panel, remote control device, and/or control software. BUTTON - CLOSE: Selecting will close the Tele-Conferencing Page or Video Conferencing Page, and return the user to the Post Greeting Page.
END OF PROGRAMMING OUTLINE
The installation of all work must be in accordance with commonly accepted industry standards and practice. A qualified Engineer shall exercise engineering supervision over the entire installation and inspect the installation at least twice prior to Acceptance Testing. It is the responsibility of the Contractor to cooperate with other trades in order to achieve well-coordinated progress and satisfactory final results. The Contractor must watch for conflicts with work of other contractors on the job and execute moderate moves or changes as are necessary to accommodate other equipment or preserve symmetry and pleasing appearance.
All equipment shall be firmly secured in place unless requirements of portability dictate otherwise. Fastenings and supports shall be adequate to support their loads with a safety factor of at least three times the weight of the equipment being installed. Any structural mounting that is not able to meet this requirement due to the specific nature of the equipment, manufacturer's requirements or limitations of the facility, shall not be installed without prior approval of the Architect. Install all boxes, equipment, hardware, and other materials plumb, level, and square.
Install all electronic equipment and support equipment in all podiums, and the other millwork in a neat and cosmetically dressed-out manner. All saw cuts, holes and recesses into laminates and woodwork shall be straight, all radius and circular cuts shall be consistent, and all uneven surfaces shall be corrected. This shall include the use of moldings, grommets, bushings, laminates, and wood products as required to dress out the installation of equipment. Assure that the installation of equipment and panels in the electronics racks and podiums are completed by using matching screws, hardware and grommets.
Electronics:
1. Assure sufficient ventilation for adequate cooling of equipment. 2. Install vent rack panels in unused spaces. 3. Securely fasten relays and small components. Do not use sticky-back tape for fasteners. 4. Build out or terminate all circuits containing passive components to provide matching
impedances. Record values of all pads. 5. Connect powered components to 120 VAC outlets on transient voltage surge suppressors.
Do not connect to outlets on other components. 6. Leave sufficient service loops of uniform length on cables to allow operation of system with
chassis outside cabinet.
VIDEO AND CONTROL SYSTEMS 13136 - 9
I I I I I I I I I I I I I I I I I I I
G. Cable, Wire, and Connectors:
1.
2.
3.
4.
5.
6.
7.
8.
All cable and wire shall be new and unspliced. All cables in conduits must be insulated and shielded from each other and from the conduit for the entire length. Run all microphone level circuits and line level circuits (up to +30 dBm) in separate ferrous conduits dedicated to these purposes. Use electrical ducts within racks. Separation between system cables and all other services shall be maximized to prevent and/or minimize the potential for electro-magnetic interference (EMI). Particular care shall be taken to ensure at least a 12" separation from electrical lines whenever feasible. At points where separation is unavoidable, distribution cables shall cross other services at right angles whenever practical to minimize EMI. Ground all line shields at the amplifier end of the respective circuits only. Use "wedge on" connectors or heat-shrink tubing to insulate the other end. Ground all audio grounds effectively at one earth connection. Water pipes do not suffice as grounds. Use earth ground or approved equal. Use rosin core solder or standard mechanical connections and terminal strips for all joints and terminations. No connectors shall be installed in non-accessible locations or used for splicing cables. All connectors shall be new. Terminal blocks, boards, strips or connectors, shall be furnished by the installer for all cables which interface with racks, cabinets, consoles, or equipment modules. All cables, regardless of length, shall be marked with wrap-around, or better, number or letter cable markers at both ends. These labels shall be self laminating to ensure durability. The label format used shall be equal, or better than, the system detailed. Racks shall have power on one side and low voltage on the other side and shall be harnessed for clean appearance. On all XLR connectors: Pin one is common/ground, pin two is high, and pin three is low.
3.3 FIELD QUALITY CONTROL (ACCEPTANCE TESTING)
A. System Performance, Tests, and Adjustments:
1.
2.
3.
4.
Report:
a. Upon completion of the tests and necessary adjustments, submit two (2) copies of a written report presenting test results, including numerical values for all measurements, for review by the Government prior to demonstration and "Acceptance Testing".
b. With the above report, submit written certification that the installation conforms to specifications, is complete, and is ready for inspection and testing by the Government.
Picture shall be evaluated for brightness, convergence, sharpness and color. System shall conform to NTSC, FCC, TASL specifications, and RS-170A. Provide waveform generator and vector scope tests. All video signals shall be 1 volt peak-to-peak.
Monitor Hum and Noise Level: Test overall hum and noise to be at least 50 dB below rated power output with amplifier controls set for optimum signal-to-noise, using input from cassette, VCR, and goose neck microphones.
Electronic Distortion:
a. Load power amplifiers with resistors matching nominal impedance of output terminals used in system in place of actual loudspeaker loads.
b. Adjust gain controls as for hum and noise level test.
VIDEO AND CONTROL SYSTEMS 13136 - 10
