IBJSC.com | I-WEB.com.vn Manual 1011604950

8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011604950

1/84

AV Surround Receiver

NR1601

ESPAOL FRANAIS ENGLISH


2/84


3/84

I

ENGLISHFRANAISESPAOL

nSAFETYPRECAUTIONS

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,DONOTREMOVECOVER(ORBACK).NOUSER-SERVICEABLEPARTSINSIDE.REFERSERVICINGTOQUALIFIEDSERVICEPERSONNEL.

The lightning ash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence o

uninsulated dangerous voltage within the products enclosure

that may be o sufcient magnitude to constitute a risk o

electric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence o important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING:TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSETHISAPPLIANCETORAINORMOISTURE.

CAUTION:To completely disconnect this product rom the mains, disconnect the plug

rom the wall socket outlet.

The mains plug is used to completely interrupt the power supply to the unit

and must be within easy access by the user.

PRECAUTION:Pour dconnecter compltement ce produit du courant secteur, dbranchez

la prise de la prise murale.

La prise secteur est utilise pour couper compltement lalimentation de

lappareil et lutilisateur doit pouvoir y accder acilement.

PRECAUCIN:Para desconectar completamente este producto de la alim entacin elctrica,

desconecte el enchue del enchue de la pared.

El enchue de la alimentacin elctrica se utiliza para interrumpir por completo

el suministro de alimentacin elctrica a la unidad y debe de encontrarse en

un lugar al que el usuario tenga cil acceso.

IMPORTANTSAFETYINSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manuacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifers) that produce heat.9. Do not deeat the saety purpose o the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third gr ounding prong. The wide blade or the

third prong are provided or your saety. I the provided plug does not ft into

your outlet, consult an electrician or replacement o the obsolete outlet.

10. Protect the power cord rom being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit rom the

apparatus.

11. Only use attachments/accessories specifed by the manuacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specifed by the manuacturer, or sold w ith the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury rom tip-over.

13. Unplug this apparatus during lightning storms or when

unused or long periods o time.

14. Reer all servicing t o qualifed service personnel.Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or

objects have allen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

15. Batteries shall not be exposed to excessive heat such as sunshine, fre or

the like.

FCCINFORMATION(ForUScustomers)

1.PRODUCTThis product complies with Part 15 o the FCC Rules. Operation is subject

to the ollowing two conditions: (1) this product may not cause harmul

intererence, and (2) this product must accept any intererence received,

including intererence that may cause undesired operation.

2.IMPORTANTNOTICE:DONOTMODIFYTHISPRODUCTThis product, when installed as indicated in the instructions contained

in this manual, meets FCC requirements. Modifcation not expressly

approved by Marantz may void your authority, granted by the FCC, to use

the product.

3.NOTEThis product has been tested and ound to comply with the limits or

a Class B digital device, pursuant to Part 15 o the FCC Rules. These

limits are designed to provide reasonable protection against harmul

intererence in a residential installation.

This product generates, uses and can radiate radio requency energy and,

i not installed and used in accordance with the instructions, may cause

harmul intererence to radio communications. However, there is no

guarantee that intererence will not occur in a particular installation. I this

product does cause harmul intererence to radio or television reception,

which can be determined by turning the product OFF and ON, the user

is encouraged to try to correct the intererence by one or more o the

ollowing measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the product into an outlet on a circuit dierent rom that to

which the receiver is connected.

Consult the local retailer authorized to distribute this type o product or

an experienced radio/TV technician or help.

ForCanadiancustomers:This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numrique de la classe B est conorme la norme NMB-003 du

Canada.


4/84

II

ENGLISH FRANAIS ESPAOL

nCAUTIONSONINSTALLATION PRCAUTIONSDINSTALLATION EMPLAZAMIENTODELAINSTALACIN

z z

z

WallParoiPared

z

z Forproperheatdispersal,donotinstallthisunitinaconfnedspace,suchasabookcaseorsimilarenclosure. More than 0.3 m is recommended. Do not place any other equipment on this unit.

z Pourpermettreladissipationdechaleurrequise,ninstallezpascetteunitdansun espace confn telquune bibliothqueou unendroitsimilaire. Une distance de plus de 0,3 m est recommande. Ne placez aucun matriel sur cet appareil.

z Paraladispersindelcaloradecuadamente,noinstaleesteequipoenunlugarconfnadotalcomounalibreraounidadsimilar. Se recomienda dejar ms de 0,3 m alrededor.

No coloque ningn otro equipo sobre la unidad.

nNOTESONUSE/OBSERVATIONSRELATIVESALUTILISATION/NOTASSOBREELUSO

WARNINGS AVERTISSEMENTS ADVERTENCIAS Avoid high temperatures.

Allow or sufcient heat dispersion when

installed in a rack.

Handle the power cord careully.

Hold the plug when unplugging the cord.

Keep the unit ree rom moisture, water, and

dust.

Unplug the power cord when not using the unit

or long periods o time.

Do not obstruct the ventilation holes.

Do not let oreign objects into the unit.

Do not let insecticides, benzene, and thi nner

come in contact with the unit.

Never disassemble or modiy the unit in any way.

Ventilation should not be impeded by covering

the ventilation openings with items, such as

newspapers, tablecloths or curtains.

Naked ame sources such as lighted candles

should not be placed on the unit.

Observe and ollow local regulations regarding

battery disposal.

Do not expose the unit to dripping or splashing

uids.

Do not place objects flled with liquids, such as

vases, on the unit.

Do not handle the mains cord with wet hands. When the switch is in the OFF position, t he

equipment is not completely switched o rom

MAINS.

The equipment shall be installed near the

power supply so that the power supply is easily

accessible.

Eviter des tempratures leves.

Tenir compte dune dispersion de chaleur

sufsante lors de linstallation sur une tagre.

Manipuler le cordon dalimentation avec

prcaution.

Tenir la prise lors du dbranchement du cordon.

Protger lappareil contre lhumidit, leau et la

poussire.

Dbrancher le cordon dalimentation lorsque

lappareil nest pas utilis pendant de longues

priodes.

Ne pas obstruer les trous daration.

Ne pas laisser des objets trangers dans

lappareil.

Ne pas mettre en contact des insecticides, du

benzne et un diluant avec lappareil.

Ne jamais dmonter ou modifer lappareil dune

manire ou dune autre.

Ne pas recouvrir les orifces de ventilation avec

des objets tels que des journaux, nappes ou

rideaux. Cela entraverait la ventilation.

Ne jamais placer de amme nue sur lappareil,

notamment des bougies allumes.

Veillez respecter les lois en vigueur lorsque

vous jetez les piles usages.

Lappareil ne doit pas tre expos leau ou lhumidit.

Ne pas poser dobjet contenant du liquide, par

exemple un vase, sur lappareil.

Ne pas manipuler le cordon dalimentation avec

les mains mouilles.

Lorsque linterrupteur est sur la position OFF,

lappareil nest pas compltement dconnect du

SECTEUR (MAINS).

Lappareil sera install prs de la source

dalimentation, de sorte que cette dernire soit

acilement accessible.

Evite altas temperaturas.

Permite la sufciente dispersin del calor cuando

est instalado en la consola.

Maneje el cordn de energa con cuidado.

Sostenga el enchue cuando desconecte el

cordn de energa.

Mantenga el equipo libre de humedad, agua y

polvo.

Desconecte el cordn de energa cuando no

utilice el equipo por mucho tiempo.

No obstruya los orifcios de ventilacin.

No deje objetos extraos dentro del equipo.

No permita el contacto de insecticidas, gasolina

y diluyentes con el equipo.

Nunca desarme o modifque el equipo de

ninguna manera.

La ventilacin no debe quedar obstruida por

haberse cubierto las aperturas con objetos como

peridicos, manteles o cortinas.

No debern colocarse sobre el aparato uentes

inamables sin proteccin, como velas

encendidas.

A la hora de deshacerse de las pilas, respete la

normativa para el cuidado del medio ambiente.

No exponer el aparato al goteo o salpicaduras

cuando se utilice. No colocar sobre el aparato objetos llenos de

lquido, como jarros.

No maneje el cable de alimentacin con las

manos mojadas.

Cuando el interruptor est en la posicin OFF, el

equipo no est completamente desconectado de

la alimentacin MAINS.

El equipo se instalar cerca de la uente de

alimentacin de manera que resulte cil acceder

a ella.


5/84

1

B

asicversion

Advan

cedversion

Simpleversion

Information

ENGLISHDEUTSCHFRANAISITALIANOESPAOLNEDERLANDSSVENSKA

Thank you or purchasing this Marantz product. To ensure proper operation, please read this user guide careully beore using the product.

Ater reading them, be sure to keep them or uture reerence.

Getting started

AccessoriesCheck that the ollowing parts are supplied with the product.

q User guide ............................................................................... 1

w Power cord (Cord length: Approx. 1.7 m) ................................1e Remote control unit (RC010SR) ..............................................1r R03/AAA batteries ................................................................... 2t Setup microphone

(ACM1H, Cord length: Approx. 6.0 m) ....................................1

y AM loop antenna ..................................................................... 1u FM indoor antenna .................................................................. 1

w e y ut

About this manual

n Operation buttonsThe operations described in this manual are based mainly on

remote control operation.

n Symbols

v This symbol indicates a reerence page on whichrelated inormation is described.

This symbol indicates a supplementary inormation

and tips or operations.

NOTE This symbol indicates points to remember operations

or unction limitations.

n IllustrationsNote that the illustrations in these instructions are or explanation

purposes and may dier rom the actual unit.

Simpleversion(Simplesetupguide)3

Basicversion12

Connections 13Important inormati on 13

Connecting an HDMI-compatible device 14

Connecting a TV16

Connecting a Blu-ray Disc player / DVD player 16

Connecting a set-top box (Satellite tuner/cable TV) 17

Connecting a portable audio player17

Connecting an iPod or USB memory device to the USB Port 18

Connecting a CD player 19

Connecting other audio devices 19

Connecting an antenna 20

Connecting a wireless receiver (RX101) 20

Playback(Basicoperation) 21Important inormati on 21

Playing a Blu-ray Disc player/DVD player 22

Playing a CD player 22

Playing an iPod22

Playing a USB memory device23

Tuning in radio stations 24

Selectingalisteningmode(Surroundmode) 26Multi-channel playback 26

Stereo playback 28

Direct playback 28

Dolby Virtual Speaker/Dolby Headphone playback 28

Advancedversion29

Speakerinstallation/connection(Otherthan7.1-channelsystemwithsurroundbackspeakers) 30

Install 30

Connect 31

Set up speakers 33

Connections(Advancedconnection)34Connecting the remote control jacks 34

Playback(Advancedoperation) 35Convenient unctions 35

Howtomakedetailedsettings37Menu map 37

Examples o on-screen display and ront display 38

Inputting characters 39

Input Setup 40

Audio Adjust 45

Manual Setup49

Inormation 53

Othersettings54

Remote control setti ngs 54Switching the on-screen display output mode 54

Operatingtheconnecteddevicesbyremotecontrolunit 55Operating AV equipment 55

Registering preset codes 55

Operating components 57

Operating learn mode 58

Setting the back light 59

Inormation60

Partnamesandunctions61Front panel 61

Display 61

Rear panel 62

Remote control unit 63Otherinormation 65

Trademark inormation65

Surround 66

Explanation o terms 70

Troubleshooting 72Resetting the microprocessor 74

Specifcations 74

ContentsGettingstarted 1

Accessories 1

About this manual 1

Features 2

Cautions on handling 2

Listopresetcodes End o this manual


6/84

2

ENGLISH DEUTSCH FRANAIS ITALIANO ESPAOL NEDERLANDS SVENSKA


Cautions on handling

BeoreturningthepowerswitchonCheck once again that all connections are correct and that there are

no problems with the connection cables.

Power is supplied to some o the circuitry even when the unit is

set to the standby mode. When going on vacation or leaving home

or long periods o time, be sure to unplug the power cord rom the

power outlet.

AboutCondensationI there is a major dierence in temperature between the inside o

the unit and the surroundings, condensation (dew) may orm on

the operating parts inside the unit, causing the unit not to operate

properly.

I this happens, let the unit sit or an hour or two with the power

turned o and wait until there is little dierence in temperature

beore using the unit.

CautionsonusingmobilephonesUsing a mobile phone near this unit may result in noise. I that

occurs, move the mobile phone away rom this unit when it is in use.

MovingtheunitTurn o the power and unplug the power cord rom the power

outlet. Next, disconnect the connection cables to other system units

beore moving the unit.

AboutCare Wipe the cabinet and control panel clean with a sot cloth.

Follow the instructions when using a chemical cleaner.

Benzene, paint thinner or other organi c solvents as well as

insecticide may cause material changes and discoloration i brought

into contact with the unit, and should thereore not be used.

Features

FullyDiscrete,identicalqualityandpowerorall7channels(50Wx7ch,8)The unit is equipped with a power amplifer that plays back high-

fdelity sound in surround mode with equal quality and power or all

channels, true to the original sound.

The power amplifer circuit adopts a discrete-circuit confguration

that achieves high-quality surround sound play back.

SupportsHDMI 1.4awith 3D,ARC, DeepColor,x.v.Color,AutoLipsyncandHDMIcontrolunctionThis unit can output 3D video signals input rom a Blu-ray Disc

player to a TV that supports a 3D system. This unit also supports

the ARC (Audio Return Channel) unction, which plays back TV

sound with this unit via an HDMI cable used or connecting the

unit and a TVz.

zThe TV should support the ARC unction.

4-HDMIinputsand1-outputThe unit is equipped with 4 HDMI input connectors or connecting

devices with HDMI connectors, such as a Blu-ray Disc player,game machine, HD video camera, etc.

HighDefnitionAudioSupportThe unit is equipped with a decoder which supports high-quality

digital audio ormat or Blu-ray Disc players such as Dolby TrueHD,

DTS-HD Master Audio, etc.

DolbyProLogicgzThe unit is provided with a Dolby Pro Logic gz decoder. When

you play back the sound in Dolby Pro Logic gz playback with rontheight speakers connected to the unit, you can enjoy playback

sound with rich spacial expression.

Easytouse,On-ScreenDisplaySimple settings are enabled with the setting menus displayed on

the TV screen. When you control the sound volume, the volume

level is displayed on the screen, and when you switch the input

source, the name o the input source is displayed.

AutosetupunctionThe unit is provided with an Auto setup unction which

automatically makes speaker settings best suited or the listening

environment. The sound rom the speakers is picked up with the

supplied microphone. Reecting sound and audio characteristics o

speakers are measured, and settings or an optimum sound feld

are automatically made.

UpconvertingoalltypesosourcevideosignalstoHDMIsignalsThis unit is provided with unctions or automatic conversion o

various video signals (component video, video) that are input to this

unit into HDMI signals or output to a monitor, allowing connection

between this unit and a TV to be made with a single HDMI cable.

DirectPlayoriPodandiPhoneviaUSBMusic data rom an iPod can be played back i you connect the

USB cable supplied with the iPod via the USB port o this unit, and

also an iPod can be controlled with the remote control unit or this

unit.

M-XPort(Marantz-eXtensionPort)This unit is equipped with the M-Xport, a Marantz ori ginal innovation

that provides outstanding expandability. You can connect the

Wireless Receiver RX101 (sold separately) to this port.

SpeakerterminalorrontheightchannelThe unit is equipped with dedicated ront height channel speaker

terminals on the rear panel. You can enjoy 7.1-channel playback

using the ront height channel and 7.1-channel playback using the

surround back channel, without having to reconnect the speakers.

Othereatures Dolby Virtual Speaker (vpage 28)

Dolby Headphone vpage 28) DTS Neural Surround (vpage 26)


7/84

Simpleversion

3

B

asicversion

Advan

cedversion

Information


Simpleversion


Simple version (Simple setup guide)Here,weexplaintheentiresetupprocedure,romunboxingtheunittousingitinahometheater.TheSimpleversionsectionprovidesthespeakerinstallation,connection,andsetupmethodsorthe7.1-channelsystemwithsurroundbackspeakers.Fortheinstalling,connecting,andsetupmethodsospeakersotherthanthe7.1-channelsystem(withsurroundbackspeakers),seepage30.

n Before connecting the unit, turn off the power to all devices.

n

For operation of the connected devices, refer to the user manuals for each device.

Play backdisc

(vpage 11)

EnjoyBlu-rayDiscandDVDinsurroundsound.

5

Set upspeakers

(vpage 6)

Use thesetup microphone(ACM1H)includedwiththeproduct, or automaticsetup.

4

Turn onpower

(vpage 6)

3

Connect(vpage 4)

Connect7.1-channelspeakers,aTVandBlu-rayDiscplayerequippedwithanHDMIconnector.

2

Install(vpage 4)

Enjoy better audio, usingthecorrectinstallmethod.

1

Set up speakers (Audyssey Auto Setup)

FinishStep5

StoreStep4

CheckStep3

CalculatingStep2

MeasurementStep1

SpeakerDetection

Preparation


8/84

4

ENGLISH DEUTSCH FRANAIS ITALIANO ESPAOL NEDERLANDS SVENSKAENGLISH DEUTSCH FRANAIS ITALIANO ESPAOL NEDERLANDS SVENSKA

Speakers

Careully check the let (L) and right (R)

channels and + (red) and (black) polarities

on the speakers being connected to the

this unit, and be sure to interconnect thechannels and polarities correctly.

Connectingthespeakercables

Peel o about 10 mm o sheathing rom the tip

o the speaker cable, then either twist the core

wire tightly or terminate it.

NOTE

Connectsothatthespeakercablecorewiresdo not protrude romthe speaker terminal.Theprotectioncircuitmaybeactivatedithecorewirestouchtherearpanelorithe+andsidestoucheachother(vpage 71ProtectionCircuit).

Nevertouchthespeakerterminalswhilethepowersupply isconnected. Doingso couldresultinelectricshock.

Use speakers with the speaker impedancesshownbelow.

SpeakerterminalsSpeaker

impedanceFRONT A

6 8

CENTER

SURROUND

SURR. BACK/SPEAKER C

FRONT B/HEIGHT

Install 1 2 4 53

Thisunitcanperorm2.0/2.1to7.1-channelsurroundplayback.This page provides the speaker installation procedure or the7.1-channelplaybackusingsurroundbackspeakersasanexample.

Thedeaultsettingis7.1-channel.Youcanalsoperorm5.1-channelplayback.Toperorm5.1-channelplayback,connect5.1-channelspeakersonly.

UsetheAudysseyAutoSetupunctionothisunittoautomaticallydetectthe number o connectedspeakersand perorm optimal settings or thespeakerstobeused.

FL FR

C

SBL SBR

SL SR

SW

90 110

22 30

135 150

Listening

position

FL Front speaker (L) Install the surround speakers in a position 60

to 90 cm higher than ear level.

Surround backspeaker Point slightly

downwards

Frontspeaker

Surroundspeaker

60 90 cm

GViewedromthesideH

FR Front speaker (R)C Center speakerSW SubwooerSL Surround speaker (L)SR Surround speaker (R)SBL Surround back speaker (L)SBR Surround back speaker (R)

1 Connect 1 2 4 532

TheSimpleversionsectionprovidesthespeakerinstallation,connection,andsetupmethodsforthe7.1-channelsystemwithsurroundbackspeakers.Fortheinstalling,connecting,andsetupmethodsofspeakersotherthanthe7.1-channelsystem(withsurroundbackspeakers),seepage30.


9/84

5

B

asicversion

Advan

cedversion

Information


Simpleversion


Blu-ray Disc player and TV

Use only an HDMI (High-Defnition Multimedia Interace) cable that bears the HDMI

logo (a certifed HDMI product). Using a cable without the HDMI logo (an uncertifed

HDMI product) may result in abnormal playback.

When outputting Deep Color or 1080p, etc., we recommend you use a High SpeedHDMI cable or a High Speed HDMI cable with Ethernet or enhanced high-quality

playback.

IN

HDMI

OUT

HDMI

To household power outlet

(AC 120 V, 60 Hz)

Power cord(supplied)

TV

Blu-rayDiscplayer

HDMI cable

(sold separately)

HDMI cable

(sold separately)

NOTE

Donotpluginthepowercorduntilallconnectionshavebeencompleted. Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Connect

FL FR

C

SBL SBR

SL SR

SW

Speaker cables

(sold separately)

Audio cable

(sold separately)

Subwooer

with built-in

amplifer



10/84

6


Set up speakers(Audyssey Auto Setup) 1 2 4 53

4


Theacousticcharacteristicsotheconnectedspeakersandlisteningroomaremeasuredand theoptimumsettingsare madeautomatically. Thisis calledAudysseyAutoSetup.Toperormmeasurement,placethesetupmicrophoneinmultiplelocationsall

aroundthelisteningarea.Forbestresults,werecommendyoumeasureinsixpositions,asshownintheillustration(uptosixpositions). When perorming Audyssey Auto Setup, MultEQ/Dynamic EQ/Dynamic

Volume unctions become active (vpage 46, 47). To set up the speakers manually, use Speaker Setup (vpage 49) on the menu.

NOTE

Make the room as quiet as possible. Background noise can disrupt the room measurements. Close

windows, silence cell phones, televisions, radios, air conditioners, uorescent lights, home appliances,

light dimmers, or other devices as measurements may be aected by these sounds.

Cell phones should be placed away rom all audio electronics during the measurement process as Radio

Frequency Intererence (RFI) may cause measurement disruptions (even i the cell phone is not in use).

Do not unplug the setup microphone rom the main unit until Audyssey Auto Setup is completed.

Do not stand between the speakers and setup microphone or all ow obstacles in the path while the

measurements are being made. This will cause inaccurate readings.

Loud test sounds may be played during Audyssey Auto setup. This is part o

normal operation. I there is background noise in room, these test signals will

increase in volume.

Operating VOLUME + during the measurements will cancel the measurements. Measurement cannot be perormed when headphones are connected.

Turn on power 1 2 4 533

1Turn on the TV and subwoofer

power.

Power on

2Change the TV input to the input of

this unit.

3Press ON to turn on power to the unit.The power indicator switches o, and power

is supplied to the unit.

Power on

Power on


11/84

7

B

asicversion

Advan

cedversion

Information


Simpleversion


About setup microphone placement

Measurements are perormed by placing the setup microphone

successively at multiple positions throughout the entire listening

area, as shown in GExampleqH. For best results, we recommendyou measure in six positions, as shown in the illustration (up to six

positions).

Even i the listening environment is small as shown inGExamplewH,

measuring at multiple points throughout the listening environmentresults in more eective correction.

FL SW C FR

SR

SBL SBR

SL *M

FL SW C FR

SR

SBL SBR

SL *M

( : Measuring positions)

GExampleqH GExamplewH

( : Measuring positions)

FL Front speaker (L) SL Surround speaker (L)FR Front speaker (R) SR Surround speaker (R)C Center speaker SBL Surround back speaker (L)SW Subwooer SBR Surround back speaker (R)

About the main listening position (*M)The main listening position is the position where listeners would

normally sit or where one would normally sit alone within the listening

environment. Beore starting Audyssey Auto Setup, place the setup

microphone in the main listening position. Audyssey MultEQ uses

the measurements rom this position to calculate speaker distance,

level, polarity, and the optimum crossover value or the subwooer.



3 Set up the remote control unitn Set up the operation mode

Press AMP to set the remote control unit to amplieroperation mode.

Press AMP

1 Set up the microphoneMount the setup microphone on a tripod or stand

and place it in the main listening position.When placing the setup microphone, adjust the height o the

sound receptor to the level o the listeners ear.

Sound receptorSetup

microphone

NOTE

Do not hold the setup microphone in your hand during

measurements.

Avoid placing the setup microphone close to a seat back or wall as

sound reections may give inaccurate results.

2 Set up the subwooferIf using a subwoofer capable of the following

adjustments, set up the subwoofer as shown below.

n When using a subwoofer with a direct modeSet the direct mode to On and disable the volume adjustment

and crossover requency setting.

n When using a subwoofer without a direct modeMake the ollowing settings:

Volume : 12 oclock position Crossoverrequency :

Maximum/Highest Frequency

Lowpassflter : O Standbymode : O


12/84

8


6The detected speakers are displayed.

NextRetry

[ENT]:Next

Front Sp. :YesCenter Sp. :YesSubwoofer :YesSurround Sp. :YesS.Back Sp. :Yes

Step1:Speaker DetectionMultEQ

NOTE

I a connected speaker is not displayed, the

speaker may not be connected correctly. Check

the speaker connection.

7Use ui to select Next and thenpress ENTER.

8Move the setup microphone to

position 2, use ui to select Next,and then press ENTER.The measurement o the second position

starts. Measurements can be made in up to

six positions.

Step2:MeasurementMultEQ

Please place microphone

Cancel

[ENT]:Next

Next

Calculate

2nd listening position.at ear height at

I you want to omit measurements rom the next

position onward, select Calculate.

(Go to Step3Calculating )

9Repeat step 8, measuring positions 3

to 6.When measurement o position 6 is

completed, a All the measurements were

fnished. message is displayed.

Step2:MeasurementMultEQ

RetryCancel

[ENT]:Calculate

Calculate

All the measurementswere finished.


Preparation

4Connect the setup microphone to the

SETUP MIC jack of this unit.

3-1.Audyssey Auto SetupMultEQ

at ear height at

Amp Assign: NormalFront Sp. : AF.Height : Measure

StartCancel

[ENT]:Select [RTN]:Back

Please place microphone

main listening position.

When the setup microphone is

connected, the ollowing screen is

displayed.

The setting method or 7.1-channel playback using

the surround back speakers is described here.

For the method o setting up speakers other than

the 7.1-channel system, select Amp Assign

and perorm steps 3 and 4 o Set up speakers

(vpage 33).

5Use ui to select Start and thenpress ENTER.When measuring begins, a test tone is

output rom each speaker.

Measurement requires several minutes.

If Cancel is selectedCancel Auto Setup? is displayed on the TV

screen. I Yes is selected, Audyssey Auto

Setup closes.

NOTE

ICautionisdisplayed:Go to Error messages (vpage 10), checkany related items, and perorm the necessary

procedures.

I the problem is resolved, return and restart

Audyssey Auto Setup.

When performing Audyssey AutoSetup over againPress ui to select Retry, and then pressENTER.

When measuring has stopped

Press ui to select Cancel, then press ENTER.Press op to select Yes, then press ENTER.

Setting up the speakers againRepeat the operation rom step 4 o Preparation .

Remotecontroloperationbuttons

Move the cursor

(Up/Down/Let/Right)Confrm the setting Return to previous menu

Step1

Speaker DetectionStep2

Measurement

In step 1, you will perorm measurements at the main listening position.

This step automatically checks the speaker confguration and speaker size, and calculates the channel

level, distance, and crossover requency. It also corrects distortion in the listening area.

In step 2, you will perorm measurements at

multiple positions (two to six positions) other than

the main listening position.

You can achieve a more eective correction o

distortion within the listening area by perormingmeasurements at multiple positions.


13/84

9

B

asicversion

Advan

cedversion

Information


Simpleversion



Step3

CalculatingStep4

Check

10 On the Step2 screen, use uito select Calculate, and then press

ENTER.Measuring results are analyzed, and the

requency response o each speaker in the

listening room is determined.

Step3:CalculatingMultEQ

Calculating

[----------]

Please wait...

Analysis takes several minutes to complete. The

time required or this analysis depends on the

number o speakers connected.

The more connected speakers there are, thelonger it takes to perorm analysis.


Move the cursor


NOTE

I the result di ers rom the actual connection

status, or i Caution! is displayed, see Error

messages (vpage 10). Then carry out AudysseyAuto Setup again.

I the result still diers rom the actual connection

status ater remeasurement or the error message

still appears, it is possible that the speakers

are not connected properly. Turn this unit o,

check the speaker connections and repeat the

measurement process rom the beginning.

I you change speaker positions or orientation,

perorm Audyssey Auto Setup again to fnd theoptimal equalizer settings.

11Use ui to select the item you wantto check, and then press ENTER.

Step4:Check

MultEQPlease check the results

of the measured item.

Distance CheckChannel Level CheckCrossover Freq.Check

Speaker Config.Check

Next[ENT]:Select

Subwooers may measure a greater reported

distance than the actual distance due to added

electrical delay common in subwooers.

I you want to check another item, press

RETURN.

12Use ui to select Next and then

press ENTER.

Step5

Store

13Use ui to select Store and thenpress ENTER.Save the measurement results.

Step5:StoreMultEQ

StoringPlease wait...

[----------]

Step5:StoreMultEQ

StoreCancel

[ENT]:Store

Please select Storeto store measurementvalues.

Saving the results requires about 10 seconds.

I you do not want to save the measurement

results, use ui to select Cancel, then select

Yes using op. All the measured AudysseyAuto Setup data will be erased.

NOTE

During saving o measurement results, be sure

not to turn o the power.

Finish

NOTE

Ater perorming Audyssey Auto Setup, do not

change the speaker connections or subwooer

volume. In event o a change, perorm Audyssey

Auto Setup again.

14Unplug the setup microphone from

the units SETUP MIC jack.

15Set Dynamic Volume.

FinishMultEQ

Storing complete.Auto Setup is now

Turn on Dynamic Volume?

Yes : No

finished.

[ ]:Select [ENT]:Exit

For details o Dynamic Volume settings, see

page 47.

n When turning Dynamic Volume on Use o to select Yes, and then press ENTER.

The unit automatically enters Evening mode.

n When turning Dynamic Volume off Use p to select No, and then press ENTER.


14/84

10


Parameter CheckThis unction enables you to check the measurement results and

equalizer characteristics ater Audyssey Auto Setup.

1Use ui to select Parameter Check and thenpress ENTER.

2Use ui to select the item you want to check, thenpress ENTER.

3-2.Parameter Check

Speaker Config.CheckDistance ChenckChannel Level CheckCrossover Freq.Check

Restore

EQ Check

[ENT]:Select [RTN]:Back

Speaker Cong. Check

Distance Check

Channel Level Check

Crossover Freq. Check

EQ Check

Check the speaker confguration.

Check the distance.

Check the channel level.

Check the crossover requency.

Check the equalizer.

I EQ Check is selected, press ui to select equalizing curve(Audyssey or Audyssey Flat) to be checked.

Use op to switch the display between the dierent speakers.

3Press RETURN.The confrmation screen reappears. Repeat step 2.

Retrieving Audyssey Auto Setup settingsI you set Restore to Yes, you can return to Audyssey Auto Setup

measurement result (value calculated at the start by MultEQ) even

when you have changed each setting manually.

Error messagesAn error message is displayed i Audyssey Auto Setup could not be completed due to speaker placement, the measurement environment, etc.

I this happens, check the relevant items, be sure to take the necessary measures, then perorm Audyssey Auto Setup over again.

NOTE

Be sure to turn o the power beore checking speaker connections.

Examples Errordetails Measures

or

RetryCancel

[ENT]:Retry

FMicrophone:None

Speaker :None

CautionMultEQ

The connected setup microphone is broken, or a

device other than the supplied setup microphoneis connected.

Not all speakers could be detected.

The ront L speaker was not properly detected.

Connect the included setup microphone to the

SETUP MIC jack o this unit.

Check the speaker connections.

too high or

RetryCancel

[ENT]:Retry

FAmbient noise is

Level is too low.

CautionMultEQ

There is too much noise in the room or accurate

measurements to be made.

Speaker or subwooer sound is too low or

accurate measurements to be made.

Either turn o any device generat ing noise or

move it away.

Perorm again when the surroundings are quieter.

Check the speaker installation and the direction

in which the speakers are acing.

Adjust the subwooers volume.

Retry

R :None

CancelSkip

Front

Caution

[ ]:Up/Down [ ]:CH

MultEQ

The displayed speaker could not be detected. Check the connections o the displayed speaker.

Retry

L :Phase

CancelSkip

Front

Caution

[ ]:Up/Down [ ]:CH

MultEQ

The displayed is connected with the polari ties

reversed.

Check the polarities o the displayed speaker.

For some speakers, this error message may

be displayed even i the speaker is properly

connected. I you are sure the connection is

correct, press ui to select Skip, then press

ENTER.


Move the cursor



15/84

11

B

asicversion

Advan

cedversion

Information


Simpleversion


Play back disc 1 2 4 535


Move the cursor


1Press BD two times in a rowto switch an input source for a

player used for playback.

2Play the component connected to

this unit.Make the necessary settings on the

player (language setting, subtitles

setting, etc.) beorehand.

3Adjust the sound volume.

VOLUME + Volume upVOLUME Volume downMUTE Muting

4Set the listening mode.Set the listening mode according to the playback contents

(cinema, music, etc.) or according to your liking (vpage 26

Selecting a listening mode (Surround mode)).

When power is switched to standbyPress STANDBY.

GPowerindicatorstatusinstandbymodeH Normal standby : Red

When HDMI Control is set to ON : Orange

You can also switch the power to standby by

pressing ON/STANDBY on the main unit.

NOTE

During power standby, a minimal amount o power is consumed. To

totally cut o the power, remove the power cord rom the power

outlet.




16/84

Basicversion

12


F Connections vpage 13

F Playback (Basic operation) vpage 21

F Selecting a listening mode (Surround mode) vpage 26

n Refer to the pages indicated below for information on connecting and playing back the variousmedia and external devices.

Audioandvideo PlaybackConnection

TV vpage 14,16

Blu-rayDiscplayer vpage 14,16 vpage 22

DVDplayer vpage 14,16 vpage 22

Set-topbox(SatellitetunerorcableTV) vpage 14,17

Gameconsole vpage 14

Audio PlaybackConnection

Portableaudioplayer vpage 17

iPod vpage 18 vpage 22

USBmemorydevice vpage 18 vpage 23

CDplayer vpage 19 vpage 22

Otheraudiodevices vpage 19

Radio vpage 20 vpage 24

Wirelessreceiver(RX101) vpage 20

Forspeakerconnections,seepage4.

Basic versionHere,weexplaintheconnectionsandbasicoperationmethodsorthisunit.




17/84

13

Advancedversion

Simpleversion

Information


B

asicversion


Converting input video signals for output (Video conversion function)This unit is equipped with three types o video input connector (HDMI, Component video and video) and

three types o video output connector (HDMI, Component video and video).

Use the connectors corresponding to the components to be connected.

This unction automatically converts va rious ormats o video signals input to this unit into the ormats used

to output the video signals rom this unit to a monitor.

GFlowovideosignals H

HDMI connector

Component video

connectors

Video connector

Monitor

HDMI connector

Component video

connectors

Video connector

HDMI

connector

Video connector

HDMI connector

Video connector

Video deviceThis unit

OutputInput(IN)

Output(MONITOROUT) Input

Connections

The video conversion unction supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60

ormats.

Resolutions o HDMI-compatible TVs can be checked at HDMI Monitor Inormation (vpage 53).

NOTE

HDMI signals cannot be converted into analog signals.

When a non-standard video signal rom a game machine or some other source is input, the video

conversion unction might not operate.

Component video input signals cannot be converted into Video ormat.

Important information Make connections asollows beore using this unit.Select anappropriateconnection type

accordingtothecomponentstobeconnected. Youmayneedtomakesomesettingsonthisunitdependingontheconnectionmethod.Reerto

eachdescriptionormoreinormation. Selectthecables(soldseparately)accordingtothecomponentsbeingconnected.

NOTE

Do not plug in the power cord until all connections have been completed.

When making connections, also reer to the operating instructi ons o the other components being

connected.

Be sure to connect the let and right channels properly (let with let, right with right).

Do not bundle power cords together with connection cables. Doing so can result in noise.

Component video

connectors

Component video

connectors




18/84

14


Connecting an HDMI-compatible deviceYou can connect up to our HDMI-compatible devices to the unit.

HDMI functionThis unit supports the ollowing HDMI unctions:

3D

Deep Color (vpage 70)

Auto Lip Sync (vpage 51) x.v.Color, sYCC601 color, Adobe RGB color, Adobe YCC601color (vpage 70, 71)

High defnition digital audio ormat

ARC (Audio Return Channel) Content Type

CEC (HDMI control)

Copyrightprotectionsystem

In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection, both

this unit and TV or the player need to support the copyright protection system known as HDCP (High-

bandwidth Digital Content Protection System). HDCP is copyright protection technology comprised o

data encryption and authentication o the connected AV device. This unit supports HDCP.

I a device that does not support HDCP is connected, video and audio are not output correctly. Read

the owners manual o your television or player or more inormation.

About HDMI cables When a device supporting Deep Color signal transer is connected, use a cable compatible High Speed

HDMI cable or High Speed HDMI cable with Ethernet When the ARC unction is used, connect a device with a Standard HDMI cable with Ethernet or High

Speed HDMI cable with Ethernet or HDMI 1.4a.

HDMI control function (vpage 35)This unction allows you to operate external devices rom the receiver and operate the receiver rom

external devices.

NOTE

The HDMI control unction may not work depending on the device it is connected to and its settings.

You cannot operate a TV or Blu-ray Disc player / DVD player that is not compatible with the HDMI control

unction.

About 3D functionThis unit supports input and output o 3D (3 dimensional) video signals o the HDMI 1.4a standards. For

playing the 3D video content, a player, and a TV that support the 3D unction o the HDMI 1.4a standards

are required in addition to this unit.

How the on-screen display appears in accordance with the videoinput signalThe way the on-screen display o the menus, status, etc., is displayed diers according to the type o video

signal input to this unit.

nWhen video signals are input from the HDMI or component videoconnector

Menu: Switches to a screen with a black background and the menu is superimposedz.

Statusdisplay: Not displayed.z I you want to display the menus superi mposed on the background image, input the same video signal s

to the video connectors. When a menu is displayed, the picture switches to the one being input rom

the video connectors and the menu is displayed superimposed over this picture.

NOTE

The menus and status display screen will not be superimposed on the video output rom the component

video connector.

nWhen video signals are input from the video connector Menu: Menus are displayed superimposed over the background image. Statusdisplay: Displayed.

NOTE

When you use the component video output connector, the on-screen display is not displayed. I you want

to display the on-screen display, connect a TV to the HDMI connector or video output connector.

Examples of on-screen display

Menu screen Status display screen

When the input source is

switched

When the volume is adjusted

MENU

1.Audio Adjust2.Information3.Auto Setup4.Manual Setup5.Input Setup

[ENT]:SelectMODE:STEREO

IN :DVD[Auto]

Master Volume -80.0dB

Status display: The operating status appears briey on the screenwhen the input source is switched or the volume is

changed.

NOTE

When you connect a TV to this unit using the video connector, the on-screen display may not be

displayed on a TV in some cases. I the on-screen display is not displayed on your TV, set the on-screen

display output mode to "Video" mode in accordance with Switching the on-screen display output mode

(vpage 54).

Important information




19/84

15

Advancedversion

Simpleversion

Information


B

asicversion


About ARC (Audio return channel) functionThe Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data

upstream to this unit.

NOTE

To enable the ARC unction,set HDMI Control to ON (vpage 51).

When connecting a TV that does not support the ARC unction, a separate connection using an audio

cable is required. In this case, reer to Connecting a TV (vpage 16) or the connection method.

About Content TypeThe HDMI Specifcation Version 1.4a enables simple, automated picture setting selection with no user

intervention.

NOTE

To enable the Content type, set Video Mode to Auto (vpage 43).

Cables used for connections

Audioandvideocable(soldseparately)

HDMI cable

This interace allows transer o digital video signals and digital audio signals over a single HDMI cable.

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

IN

HDMI

Blu-rayDiscplayer DVDplayer TVSet-topbox

Gameconsole

Connecting an HDMI-compatible device

When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an

HDMI cable.

When connecting a device that supports Deep Color transmission, please use a High Speed HDMI

cable or High Speed HDMI cable with Ethernet.

Video signals are not output i the input video signals do not match the monitors resolution. In this case,

switch the Blu-ray Disc/DVD players resolution to a resolution with which the monitor is compatible.

When this unit and monitor are connected with an HDMI cable, i the monitor is not compatible with

HDMI audio signal playback, only the video signals are output to the monitor.

NOTE

The audio signal rom the HDMI output connector (sampling requency, number o channels, etc.) may be

limited by the HDMI audio specifcations o the connected device regarding permissible inputs.

Connecting to a device equipped with a DVI-D connectorWhen an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to

DVI signals, allowing connection to a device equipped with a DVI-D connector.

NOTE

No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio

connections.

Signals cannot be output to DVI-D devices that do not support HDCP.

Depending on the combination o devices, the video signals may not be output.

n Settings related to HDMI connectionsSet as necessary. For details, see the respective reerence pages.

Input Assign (vpage 42)Set this to change the HDMI input connector to which the input source is assigned.

HDMI Setup (vpage 51)Make settings or HDMI video/audio output.

Auto Lip Sync

HDMI Audio Out

HDMI Control

Standby Source

Power O Control

NOTE

The audio signals output rom the HDMI connectors are only the HDMI input signals.


20/84




21/84

17

Advancedversion

Simpleversion

Information


Basicversion


Connecting a set-top box (Satellite tuner/cable TV) You can watch satellite or cable TV.

Select the connector to use and connect the device.

For instructions on HDMI connections, see Connecting an HDMI-compatible device (vpage 14).


Videocable(soldseparately)

Video cable (Yellow)

Componentvideo cable

Y

PB

PR

Y

PB

PR

(Green)

(Blue)

(Red)

Audiocables(soldseparately)

Audio cable(White)

(Red) R

L

R

L

Coaxial

digital cable

RL

RL

VIDEO AUDIO

AUDIO

RL

OUTOUT

VIDEOCOMPONENT VIDEO

Y PB PR

OUT OUT

COAXIAL

Y PB PR

Y PB PR

SatelliteTuner/CableTV

Set this to change the digital input connector or component video input connector to which the input

source is assigned.

InputAssign (vpage 42)

inSetasNecessary

Connecting a portable audio playerYou can enjoy audio rom a portable audio player.


Audiocable(soldseparately)

Stereo mini

plug cable

AUDIO

AUDIO

OUT

Portableaudioplayer

You can enjoy listening to music by connecting a portable audio player via the AUX1 input connector. In this

case, set the input source to AUX1.




22/84

18


Connecting an iPod or USB memory device to the USB PortYou can enjoy music, stored on an iPod or USB memory device.

Cables used for connectionsTo connect an iPod to this unit, use the USB cable supplied with the iPod.

USBmemorydevice

iPod

or

Marantz does not guarantee that all USB memory devices will operate or receive power. When using a

portable USB connection type HDD o the kind to which an AC adapter can be connected to supply power,

use the AC adapter.

NOTE

USB memory devices will not work via a USB hub.

Do not use an extension cable when connecting a USB memory device. This may cause radio i ntererence

with other devices.

Supported iPod ModelsMade or

iPod touch (2nd generation)

iPod touch (1st generation)

iPod classic

iPod with video

iPod nano (5th generation)

iPod nano (4th generation) iPod nano (3rd generation)

iPod nano (2nd generation)

iPod nano (1st generation)

iPhone

iPhone 3G

iPhone 3GS




23/84

19

Advancedversion

Simpleversion

Information


Basicversion


Connecting a CD player You can enjoy CD sound.

Select the connector to use and connect the device.



Audio cable(White)

(Red) R

L

R

L

Optical cable

RL

RL

AUDIO

AUDIO

RL

OUT

OPTICAL

OUT

CDplayer

Set this to change the digital input connector to which the input source is assigned.

InputAssign (vpage 42)

inSetasNecessary

Connecting other audio devicesYou can enjoy listening to playback rom other audio devices connected to this unit.



Audio cable(White)

(Red) R

L

R

L

RL

RL

AUDIO

AUDIO

RL

OUT

Otheraudiodevices

You can enjoy music by connecting a portable audio player via the AUX2 input connector. In this case, set

the input source to AUX2.




24/84

20


Connecting a wireless receiver(RX101)

By connecting a wireless receiver RX101 (sold separately) to this unit,

you can receive and playback audio signals rom other devices using

the Bluetooth Communication Function.

Use a Bluetooth device that is A2DP compatible (vpage 70 A2DP).

You can also use wireless receiver RX101 as an external IR receiver.

For instructions on the wireless receiver settings, reer to the

RX101s operating instructions.

WirelessreceiverRX101

You can enjoy listening to music by connecting a wireless receiver

via the M-XPort input connector. In this case, set the input source to

M-XPort.

NOTE

To use wireless receiver RX101 as external IR receiver, set the remote

sensor unction o this unit to DISABLE (vpage 54 Remote controlsettings).

Connecting an antenna Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts.

Ater connecting the antenna and receiving a broadcast signal (vpage 24 Listening to FM/AM broadcasts), fx the antenna with tape in aposition where the noise level becomes minimal.

w eqFM outdoor

antenna

75 Coaxialcable

GroundAM outdoor

antenna

AM loop antenna

(supplied)

Black White

FM indoor

antenna

(supplied)

nAM loop antenna assembly

1Put the stand section

through the bottom of

the loop antenna from

the rear and bend it

forward.

Stand

Square

hole

Projecting

part

Loop

antenna

2Insert the projecting part

into the square hole inthe stand.

n

Using the AM loop antennaSuspending on a wallSuspend directly on a wall without assembli ng.

Nail, tack, etc.

Standing aloneUse the procedure shown let to assemble.

NOTE

Do not connect two FM antennas simultaneously.

Even i an external AM antenna is used, do not disconnect the AM

loop antenna.

Make sure the AM loop antenna lead terminals do not touch metal

parts o the panel.

I the signal has noise intererence, connect the ground termi nal

(GND) to reduce noise.

I you are unable to receive a good broadcast signal, we recommend

installing an outdoor antenna. For details, inquire at the retail store

where you purchased the unit.

Direction o broadcasting station

Bluetooth device

(A2DP Compatibility)

Remote control unit




25/84

21

Advancedversion

Simpleversion

Information

Basicversion

Playback (Basic operation)

n Playing a Blu-ray Disc player/DVD player(vpage 22)

n Playing a CD player (vpage 22)

n Playing an iPod(vpage 22)

n Playing a USB memory device (vpage 23)

n Tuning in radio stations (vpage 24)

Selecting a listening mode (Surround mode)(vpage 26)

n Selecting the input source (vpage 21)

n Adjusting the master volume (vpage 21)

n Turning off the sound temporarily (vpage 21)

Playback (Advanced operation) (vpage 35)

Important informationBeore starting playback, make the connections between the dierent

components and the settings on the receiver.

NOTEAlso reer to the operating instructions o the connected components

when playing them.

Selecting the input sourcePress the input source select button(BD, DVD, SAT, GAME, AUX1, USB,TV, CD, TUNE, M-XP) twice to playback that source.

The desired input source can be selecteddirectly.

You canalso use the ollowing operation to select aninputsource.

Select input source AUX2 to play back music rom an audiosystem connected to the AUX2 input connector.

Select the input source AUX2 using one o the ollowing methods.q Source select menu (Using the Source Select menu

provided on the right)wINPUT df on the remote control unit (Operating the remote

control unit provided on the right)eINPUT SELECTOR knob on the main unit (Operating the main

unit provided on the right)

n Using the Source Select menuq Press AMP and then press SOURCE SEL.

Display the Source Select menu.

SATDVD

GAME

AUX1

TVUSB

CDAUX2

TUNERM-XPort

BD

Source Select

[ENT]:Select[ ]:Source

Thecurrentlyselectedinputsourceishighlighted.

w Use uiop to select the inputsource, then press ENTER.The input source is set and the source

selection menu is turned o.

When using with an iPod connected directly to the USB port o this

unit, select USB or the input source.

Input sources that are not going to be used can be set ahead o time.

Make this setting at Source Delete (vpage 52).

To turn o the source selection menu without selecting an input

source, press SOURCE SEL again.

n Operating the remote control unitPress INPUT df. When INPUT df is pressed, the

input source is switched in the order

shown below.

BD DVD SAT GAME

CD TV

USB

M-XPort AUX2TUNER

AUX1

n Operating the main unitTurn INPUT SELECTOR. Turning INPUT SELECTOR switches

the input source, as shown below.

BD DVD SAT GAME

CD TV

USB

M-XPort AUX2TUNER

AUX1

Adjusting the master volumeUse VOLUME + to adjust the volume.

n When the Volume Display setting(vpage 52) is RelativeGAdjustablerangeH

80.5dB 18.0dB

n When the Volume Display setting (vpage 52) isAbsoluteGAdjustablerangeH 0.0 99.0

The variable range diers according to the input signal and channel

level setting.

You can also operate via the main unit.

In this case, perorm the ollowing

operations.

Turn VOLUME to adjust the volume.

Turning off the sound temporarilyPress MUTE.

The sound is reduced to the level set at Mute Level (vpage 52). To cancel, press MUTE again. Muting can also be canceled by

adjusting the master volume.




26/84

22

Playing a Blu-ray Disc player/DVDplayer

The ollowing describes the procedure or playing Blu-ray Disc player/

DVD player.

1Prepare for playback.q Turn on the power o the TV,

subwooer and player.w Change the TV input to the input o

this unit.e Load the disc in the player.

2Press ON to turn on power tothe unit.

3Press BD or DVD twice to switchthe input source for the playerused for playback.

4Play the component connected to this unit.Make the necessary settings on the player (language setting,

subtitles setting, etc.) beorehand.

Playing a CD playerThe ollowing describes the procedure or playing CD player.

1Prepare for playback.q Turn on the power o the

subwooer and player.w Load the disc in the player.

2Press ON to turn on power tothe unit.

3Press CD twice to switch theinput source to the CD player.

4Play the component connected to this unit.

Playing an iPodYou can play back both video, photo and audio.

Listening to music on an iPod

1Connect the iPod to the USB

port (vpage 18 Connecting aniPod or USB memory device to

the USB Port)

2Press ON to turn on power to theunit.

3Press USB twice to switch theinput source to USB.

NOTE

I the connections screen is not displayed,

the iPod may not be properly connected.

Reconnect it.

4Press SEARCH and hold it down for 2 seconds ormore to select the display mode.

There are two modes or displaying the contents recorded on the

iPod.

Remote mode Display iPod inormation on the TV screen.

English letters, numbers and certain

symbols are displayed. Incompatible

characters are displayed as .

(period).

In Remote mode, the iPod display is

as shown at right. OK to disconnect.

Direct mode Display iPod inormation on the iPod screen.

Direct iPod is displayed on the display o this unit.

Displaymode Remote mode Direct mode

Playable

fles

Musicfle P P

Videofle z

Activebuttons

Remotecontrolunit(Thisunit)

P P

iPod P

z Only the sound is played.

5Useui to select the item, then press ENTER or p toselect the le to be played.

6Press ENTER, p or 1.Playback starts.

You can speciy the duration o the on-screen display to be

displayed (deault: 30 sec) at menu USB (vpage 53). Pressuiop to return to the original screen.

To play back compressed audio with extended

bass or treble reproduction, we recommend

playback in M-DAX mode (vpage 48). The

deault setting is OFF.

In Remote mode, press STATUS during playbackto check the title name, artist name, and album

name.

iPod operation

Operation buttons Function

uiop Cursor operation

ENTER Enter

SEARCH

(Press and release)Page search mode

SEARCH(Press and hold)

Direct/Remote mode switching

RETURN Return

6 7

(Press and hold)

Manual search

(ast-reverse/ast-orward)

1 Playback / Pause

8 9 Auto search (cue)

3 Pause

2 Stop

REPEAT Repeat playback

RANDOM Shufe playback

TV POWERTV power on/standby

(Deault : Marantz)

TV INPUTSwitch TV input

(Deault : Marantz)

Repeat playback and shue playback can also be set rom

Input Setup Playback Mode (vpage 44) in the menu.

NOTE

Depending on the type o iPod and the sotware vers ion, some

unctions may not operate.

Note that Marantz will accept no responsibility whatsoever or any

problems arising with the data on an iPod when using this unit in

conjunction with the iPod.


27/84




28/84

24

Tuning in radio stations

Listening to FM/AM broadcasts

1Press TUNE twice to switch theinput source to TUNER.

2Press BAND to select FM orAM.

FM When listening to an FM broadcast.

AM When listening to an AM broadcast.

3Tune in the desired broadcast

station.

qTotuneinautomatically(Autotuning)Press T.MODE to light the AUTO indicator on the display, thenuse TUNING + or TUNING to select the station you want tohear.

wTotuneinmanually(Manualtuning)Press T.MODE to turn off the displays AUTO indicator, then useTUNING + or TUNING to select the station you want to hear.

I the desired station cannot be tuned in with auto tuning, tune it inmanually.

When tuning in st ations manually, press and hold TUNING + orTUNING to change requencies continuously.

You can speciy the duration o the on-screen di splay to be displayed(deault: 30 sec) at menu TUNER (vpage 53). Press uiop toreturn to the original screen.

n Listening to preset stations

1Press SHIFT/TOP MENU to selectthe memory block (A to G).

2Press PRESET +, PRESET or1 8 to select the desired presetchannel.

You can also operate via the main unit.

In this case, perorm the ollowing

operations.

Press op to select the preset radio

station.

n Direct frequency tuningYou can enter the receiving requency directly to tune in.

1Press SEARCH/INFO.

2Input frequencies using the 0 9.

I o is pressed, the immediately preceding

input is cancelled.

3When setting is completed, press

ENTER.The preset requency is tuned in.

n Presetting radio stations (Manual preset)Your avorite broadcast stations can be preset so that you can tune

them in easily. Up to 56 stations can be preset.

StationscanbepresetautomaticallyatAutoPreset(vpage 41). I Auto Preset is perormed ater perormingManual Preset, the Manual Preset settings will be overwritten.

1Tune in the broadcast station you

want to preset.

2Press MEMORY.

3Press SHIFT/TOP MENU to selectthe block (A to G) in which to

preset the channel (1 to 8 per

block), then press PRESET +,PRESET or1 8 to select thepreset number.

4Press MEMORY again to completethe setting.

To preset other stations, repeat steps 1 to 4.

Default settingsBlock(AG)

andChannel(18)

DeaultSettings

A1 A887.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /90.1 MHz

B1 B8520 / 600 / 1000 / 1400 / 1710 kHz,90.1 / 90.1 / 90.1 MHz

C1 C8 90.1 MHz

D1 D8 90.1 MHz

E1 E8 90.1 MHz

F1 F8 90.1 MHz

G1 G8 90.1 MHz

Specify a name for the preset broadcast station(Preset Name) (vpage 42)


29/84




30/84

26

Multi-channel playback

n Surround playback of 2-channel sources

1Playing the source (vpage 22 24).

2Press SURR. to select thesurround decoder to play backmultichannel sound.

Each time SURR. is pressed, the surround mode is switched.Which decoder can be selected depends on the settings o AmpAssign (vpage 49) or Speaker Confg. (vpage 49).

DOLBY PLgz z1 This mode is or 7.1-channel surround playback

using the ront height speakers. PLgz Height is displayed.

DOLBY PLgx z2 This mode is or 7.1-channel or 6.1-channel

surround playback using the surround backspeakers. PLgx Movie, PLgx Musicor PLgx Game

is displayed.

DOLBY PLg This mode is or 5.1-channel surround playback.Select this mode i no ront height speaker norsurround back speaker is to be used. PLg Movie, PLg Musicor PLg Game is

displayed.

DTS NEO:6 This mode is or 7.1-channel, 6.1-channel or5.1-channel surround playback using the surroundback speakers. DTS NEO:6 Movie or DTS NEO:6 Music is

displayed.

MULTI CH

STEREO

This mode is or enjoying stereo sound rom all

speakers.

NEURAL z3 This mode is or 7.1-channel, 6.1-channel or

5.1-channel surround playback using the surround

back speakers. NEURAL is displayed.

z1 This can be selected when the Amp Assign (vpage 49)setting in the menu is set to Normal, and the Front SpeakerSetup setting (vpage 51) is set to A.

z2 This can be selected when Amp Assign is set to Normal orSpeaker Confg. S.Back is not set to None.

z3 This mode supports analog 2-channel audio, and linear PCM 2channel (44.1 kHz, 48 kHz) audio.

Selecting a listening mode (Surround mode)This unit can play input audio signals in multi-channel surround mode or in stereo mode.

Select a listening mode suitable or the playback contents (cinema, music, etc.) or according to your liking.

Listening modeInputaudio

signalPlayback Listeningmode

2-channel

Multi channel

SurroundMulti-channel

playback (vpage 26)

For 2-channel signal input:

Surround-channel signals are created and played with surround playback.

For multichannel signal input: The surround signal recorded in source is played as surround playback.

(The sound is played according to the settings o the speaker size in

Speaker Confg. (vpage 49).)

Surround-back-channel or ront-height-channel si gnals that are not

recorded in source can be created.

2-channel

Multi channel

StereoStereo playback

(vpage 28)

I multichannel signals are input, they are mixed down to 2-channel audio

and are played.

Subwooer signal is also output.

2-channel

Multi channel

Stereo

Surround

Direct playback

(vpage 28)

Sound recorded in source is played as is.

Surround back signals or ront height signals are not created.

In this mode, the ollowing items cannot be adjusted.

Tone (vpage 46) MultEQ (vpage 46)

Dynamic EQ (vpage 47) Dynami c Vol ume (vpage 47)

M-DAX (vpage 48)

2-channel

Multi channel

Virtual

Surround

Dolby Virtual Speaker/

Dolby Headphone

playback (vpage 28)

Virtual Surround processing is perormed on 2-channel or multichannel

input signals that are played back.

Some listening modes cannot be selected, depending on the audio ormat or number o channels o the input signal.

For details, see Types o input signals, and corresponding surround modes (vpage 68).

Adjust the sound feld eect with the menu Surround Parameter (vpage 45) to enjoy your avorite sound mode. You can select the listening mode by pressing SURROUND MODE on the main unit.

Press SURROUND MODE and the modes are switched as shown below.

DOLBY VIRTUAL

DOLBY PLg(x) Music

NEURAL

DOLBY PLg(x) GameAUTO*(STEREO) STEREO DOLBY PLgz DOLBY PLg(x) Movie

MULTI CH STEREO DTS NEO:6 cinemaDTS NEO:6 music

zFor AUTO, press AUTO on the amplifer or remote control.




31/84

27

Advanc

edversion

Simpleversion

Information

Ba

sicversion

n Surround playback of multi-channel sources(Dolby Digital, DTS etc.)

1Playing the source (vpage 22

24).

2Press SURR. to select thesurround decoder to play back

multichannel sound.

Select the surround mode while viewing the display on the

screen (vDisplaying the currently playing surround mode

at right).

Which decoder can be selected depends on the input signal,

the settings o Amp Assign (vpage 49) or Speaker Confg.(vpage 49).

Displaying the currently playing surround modeInputsignal Surroundmode Display

DOLBY DIGITAL

(2ch)NEURAL NEURAL

DOLBY DIGITAL

(other than 2ch) /

DOLBY DIGITAL EX

DOLBY DIGITAL DOLBY DIGITAL

DOLBY DIGITAL EX DOLBY DIGITAL EX

DOLBY DIGITAL + PLgx Movie D+ PL x MovieDOLBY DIGITAL + PLgx Music D+ PL x MusicDOLBY DIGITAL + PLgz DOLBY D PL z

DOLBY DIGITAL Plus

DOLBY DIGITAL Plus DOLBY DIGITAL +DOLBY DIGITAL Plus + EX DOLBY D + EXDOLBY DIGITAL Plus + PLgxMovie

D + + PL x Mv

DOLBY DIGITAL Plus + PLgxMusic

D + + PL x Ms

DOLBY DIGITAL Plus+ PLgz DOLBY D + PL zDOLBY TrueHD

DOLBY TrueHD DOLBY TrueHD

DOLBY TrueHD + EX DOLBY HD EX

DOLBY TrueHD + PLgx Movie HD +PL x MvDOLBY TrueHD + PLgx Music HD +PL x MsDOLBY TrueHD + PLgz DOLBY HD PL z

DTS (5.1ch) /

DTS-ES Discrete 6.1 /DTS-ES Matrix 6.1 /

DTS 96/24

DTS SURROUND DTS SURROUND

DTS + PLgx Movie DTS PL x MvDTS + PLgx Music DTS PL x Ms

DTS + PLgz DTS PL zDTS + NEO:6 DTS NEO:6

DTS ES MTRX6.1 DTS ES MTRX6.1

DTS ES DSCRT6.1z1 DTS ES DSCRT6.1

DTS 96/24z2 DTS 96/24

DTS-HD

DTS-HD HI RES DTS-HD HI RES

DTS-HD MSTR DTS-HD MSTR

DTS-HD + NEO:6 DTS-HD NEO:6

DTS-HD + PLgx Movie DTS-HD PL x MvDTS-HD + PLgx Music DTS-HD PL x MsDTS-HD + PLgz DTS-HD PL zDTS Express DTS Express

PCM (multi ch)

MULTI CH IN MULTI CH IN

MULTI IN + Dolby EX MULTI Dolby EX

MULTI IN + PLgx Movie MULTI IN PL x MvMULTI IN + PLgx Music MULTI IN PL x MsMULTI IN + PLgz MULTI IN PL zMULTI CH IN 7.1 MULTI CH IN 7.1

Al l Input si gna l Dolby VIRTUAL SPEAKER DOLBY VS

z1 This is displayed when the input signal is DTS-ES Discrete 6.1.z2 This is displayed when the input signal is DTS 96/24.

Multi-channel playback

GViewsonthedisplayH

q w

qShows a decoder to be used. A DOLBY DIGITAL Plus decoder is displayed

as DOLBY D +.

wShows a decoder that creates sound outputrom the surround back speakers.

+ PLgz indicates the ront height soundrom ront height speakers.

For an input signal that can be reproduced in

each surround mode, see Surround modes and

surround parameters (vpage 66).




32/84

28

Stereo playbackThis is the mode or playing in stereo. The tone can be adjusted.

Sound is output rom the ront let and right speakers and subwooer.

I multichannel signals are input, they are mixed down to 2-channel

audio and are played.


24).

2Press STEREO.Stereo playback begins.

Direct playbackSound recorded in source is played as is.

Surround back signals or ront height signals are not created.

In this mode, the ollowing items cannot be adjusted.

Tone (vpage 46) MultEQ (vpage 46)

Dynamic EQ (vpage 47) Dynamic Volume (vpage 47)

M-DAX (vpage 48)


24).

2Press P.DIRECT to select thedirect mode.

I PURE DIRECT on the main unit ispressed, the same unction as with the

remote control unit can be obtained.

Each time P.DIRECT is pressed, the direct mode is switched.

Source Direct This mode plays back tracks at high sound

quality without passing through the sound quality

adjustment circuits.

Pure Direct z This mode plays back tracks at the closest to the

original sound quality.

Auto This mode detects the type o input digital signal,

and automatically selects the corresponding mode

or playback.

zThe ollowing circuits that aect sound quality are set to o.

Main units display circuit (The display is turned o.)

Analog video input/output circuit

To cancel, press P. DIRECT again.

Video signals are only output when HDMI signals are played in thePURE DIRECT mode.

NOTE

When in the PURE DIRECT mode, the menu screen is not displayed.

Dolby Virtual Speaker/DolbyHeadphone playback

Dolby Virtual Speaker modeThis delivers a ull surround sound experience rom two stereo

speakers.

Sound is output rom the ront let and right speakers.

I multichannel signals are input, they are mixed down to 2-channnel

audio.


24).

2Press SURR. to select DOLBYVS.

Dolby Headphone modeYou can enjoy listening to multi-channel surround sound through

headphones using this mode.

Press SURR. to select the DolbyHeadphone mode.

Each time SURR. is pressed, the Dolby Headphone mode isswitched.

DOLBY

HEADPHONE

This is the surround mode or listening with

headphones.The surround sound feld is played through regularheadphones.

DOLBY HP

BYPASS

The sound is played in the normal stereo moderather than the surround mode when listeningwith headphones.

DOLBY HP

PLg Movie

This mode is best suited or movie sources.

DOLBY HP

PLg Music

This mode is best suited or music sources.

NOTE

The surround mode returns to the previous setting as soon as the

plug is removed rom the jack. In headphone mode, Tone Control is not available. You can select Dolby HP PL Movie or Dolby HP PL Music

when a 2-channel source is played back.




33/84

Advancedversion

29

Simpleversion

Information

Ba

sicversion

Advanc

edversion

F Speaker installation/connection (Other than 7.1-channel system with surroundback speakers) vpage 30

F Connections (Advanced connection) vpage 34

F Playback (Advanced operation) vpage 35

F How to make detailed settings vpage 37

F Other settings vpage 54

F Operating the connected devices by remote control unit vpage 55

Advanced versionHere,weexplainunctionsandoperationsthatletyoumakebetteruseothisunit.




34/84

30

When 5.1ch installed

FL FR

C

SL SR

SW

z1z2

Listening

position

z1 22 30 z2 120

When 2.1ch installed

FRSW

FL

Listening position

FL Front speaker (L) SBL Surround back speaker (L)FR Front speaker (R) SBR Surround back speaker (R)C Center speaker FHL Front height speaker (L)SW Subwooer FHR Front height speaker (R)SL Surround speaker (L)SR Surround speaker (R)

Procedureorspeakersettings

Install

Connect (vpage 31)

Set up speakers (vpage 33)

Install

This unit is compatible with Dolby Pro Logic gz (vpage 70),which oers an even wider and deeper surround sensation.

When using Dolby Pro Logic gz, install ront height speakers.

Install the surround back speakers in a position 60 to 90 cm higher

than ear level.

z

Surroundspeaker

60 90 cm

GViewedromthesideH

Front heightspeaker Point slightly

downwards

At least1 m

Surround backspeaker Point slightly

downwards

Frontspeaker

z Recommended or Dolby Pro Logic gz

NOTE

It is not possible to use the surround back speakers and ront height

speakers simultaneously.

When 7.1ch (Front height speaker) installed

FL FR

FHRFHL

C

SL SR

SW

z1

z2

z3

Listening position

z1 22 30 z2 22 45 z3 90 110

When 6.1ch (Surround back speaker) installed

FL FR

C

SB

SL SR

SW

z1z2

Listening position

z1 22 30 z2 90 110

Speaker installation/connection (Other than 7.1-channel system with surround back speakers)Thissectionexplainsawiderangeospeakerinstallation/connection/settingprocedures.Fordetailsoninstalling/connecting/setting7.1channelaudiothatusessurroundbackspeakers,seeSimpleversion(Simplesetupguide)(vpage 3).UsetheAudysseyAutoSetupunctionothisunittoautomaticallydetectthenumberoconnectedspeakersandperormoptimalsettingsorthespeakerstobeused.




35/84

31

Ba

sicversion

Simpleversion

Information

Advanc

edversion

6.1-channel (Surround back speaker) connectionI a single surround back speaker is to be used (with a 6.1-channel connection), connect it to the L

terminals o the SURR. BACK/SPEAKER C terminal.

For speaker settings in this case, see When 6.1ch (Surround back speaker) installed (vpage 30).

For 6.1-channel (Surround back speaker) playback, set Amp Assign in Set up speakers (vpage 33) to

Normal.

FL FR

C

SB

SL SR

SW

Connect For the method o connecting the 7.1-channel system with surround back speakers, see page 4.

For the method o connecting the TV, see page 5.

7.1-channel (Front height speaker) connectionFor 7.1-channel (Front height speaker) playback, set Amp Assign in Set up speakers (vpage 33) toNormal.

Forspeakerimpedanceandspeakercableconnections,seepage4.

FL FR

FHRFHL

C

SW

SL SR




36/84

32

Connect

Front A/B connectionThe second set o ront speakers can be connected to the FRONT B/

HEIGHT terminals.

In this case, set Front Speaker Setup (vpage 51) o SpeakerSetup to B.

FL(A)FL(B) FR(B)FR(A)

SW

For surround playback o a multichannel source, i you connect the

center speaker, surround speakers, surround back speakers andsubwooers, 7.1-channel playback is available.

Front speakers can be used separately, depending on the speakers

specifcations or playback source such as ron

Documents

IBJSC.com | I-WEB.com.vn Manual 1011604950