If we can’t measure We can’t manage

If we can’t measure We can’t manage

Introduction

Akanksha Power and Infrastructure Pvt Ltd., (AKANKSHA) is one of the leading companies in the

field of electrical engineering, a single window source offering turnkey solutions for your electrical

needs starting from conceptualization to design, manufacturing, supply, installation and

commissioning.

Akanksha is an ISO 9001:2008 company and manufacturer of electrical panels, viz., APFC, MCC, PCC

and VFD Panels offering turnkey solutions for Electrical infrastructure up to 33 kV voltage level.

We also manufacture Products related to Measurement viz., Automatic Power Factor Correction

Relay/ Multifunction meters/ Current Transformers(CT) and Voltage transformers(PT) for 3.3kV to

33kV and Residual Voltage Transformer(RVT) up to 11 KV from its STATE OF THE ART

manufacturing facilities / works located at Nashik, Maharashtra. The Company has been successful

in managing Input-based Franchisee operation of a Rural Distribution Sub-division in NESCO, Odisha

since 2010. The Company has also been executing EPC Capital Projects for loss reduction and

adopted best practices in the Electricity distribution management adopting IT Techniques and tools

in Meter-reading, Spot Billing, Performance monitoring, MIS and Energy Audit. M/s. Akanksha

Power bagged the prestigious National Award from the Hon’ble Minister of Power & Coal, Govt. of

India for meritorious performance in 2013-14 under Rural Distribution Franchisee segment.

AKANKSHA has a cloud portal called “UDReAM”, which not only supports the Android mobile-based

Billing System, required by Energy Distribution Companies, but also serves as a unique online

platform for managing the whole spectrum of energy measurement carried out in the Distribution

Sector to commercial activities including Field Activities Monitoring & Tracking (FAMT), Consumer

Support System (CSS), Analytics – Insight and Energy Management System (EMS) for bringing in

360% view of the Consumer Billing System with improved accuracy, accountability and transparency.

Akanksha is one of the few leading companies dealing in EMS (Energy Management Solutions) and

PQS (Power Quality Solutions), completely Unique with Smart Communication including options of

RF, ZigBee, Wi-Fi, Ethernet, GPRS & so on.

We represent M/s. JANITZA, Germany, which is a global leader in EMS and PQS offering -

Monitoring and Analysis of Power Quality in Utilities (TRANSCOMs / DISCOMs / GENCOMs & Industrial Houses)

Energy Management and Monitoring System RCM fault Current Monitoring Peak Demand Management

Our product range includes

Smart Reactive Power Compensation (APFC Panels) – upto 11 kV and Power Quality Solutions including Tuned & Detuned Filters(For DISCOMs and Industrial Houses)

CT – PT and metering cubicle – upto 33 kV (For DISCOMs and Industrial Houses) Circuit Breakers – upto 33 kV (For DISCOMs and Industrial Houses) MCC and PCC panels up to 4000 Amps, VFD Panels Stand alone, compartmentalized and draw out type, Panels as required by the customer.

If we can’t measure We can’t manage

We also represent M/s. J-Schneider, GmbH, Germany in exclusively marketing and installing Unique

industrial power supplies, Transformers, Reactors, High voltage power supplies, etc for Industries in

India and South East Asia.

And

M/s EFORE, from Finland, for SMPS based online battery charger, a product, with many unique

features very suitable for critical applications like Substations, Telecommunication Equipment, etc

With our world class products and customized services to our esteemed customers, we are striving

to become a center for providing complete solutions (products & services) and for bringing in

“Energy Transparency” in the electricity value chain.

For more information about us, kindly visit our website: www.apipl.co.in

"We strive towards a long-standing relationship with our customers"

If we can’t measure We can’t manage

PCC / MCC Panels

Customized Power control / Motor control panels,

suit to customer's application. We offer both in

fixed and draw out constructions.

The panels are engineered with premium quality

material and components with latest technology.

LT Distribution Panels : For utilities, Industries and

other electrical Installations.

Products

MV APFC Panel

Automatic control of Power Factor at 3.3kV, 6.6kV

& 11kV

Changing Capacitor KVAR as per variable

load to maintain PF within desired level

Automatic Or Manual Selection of required KVAR

Switching Steps.

LV APFC Panel

Fast, Transient – Free switching.

Fast compensation (1 second typical, 3-4 seconds

maximum) unlimited number of operations.

Replacing electro-mechanical power factor

solutions, with a better, long lasting solution.

Harmonic filtration (Optional)

Accurate Power Factor Control even with

Harmonics present

Prevent damage to sensitive equipments

Includes comprehensive power quality analyzer

Real Time PFC for dynamic loads.

If we can’t measure We can’t manage

CT / PT / RVT-

Indoor (Epoxy Resin Cast) / Outdoor

(Oil cooled) Voltage Transformer

up to 33kV

Indoor (Epoxy Resin Cast) / Outdoor (Oil

cooled) Current Transformer for systems up to

33kV

Indoor (Epoxy Resin Cast) / Outdoor (Oil

cooled) Residual Voltage Transformer (RVT) for

system upto 11kV

Indoor / Outdoor CT / PT Metering Cubicle

MV Vacuum Contactor

Rated voltage 12kV.

Rated frequency 50 / 60 Hz.

Rated current 400A

BIL 28/95 KV peak

Vacuum Interrupter designed for 100000 mechanical

operations

Developed considering critical application, viz.,

Capacitor Bank switching

Available in Solenoid & Mechanically Latched

Versions

Different Coil Voltages available

Dolphin Smart PFR & MFM

Multiple versions of PF controller are available with 1

CT & 3 CT measurement of load current

Meas. Voltage L-L, VAC 415 Auxiliary voltage 230 VAC or 415 VAC

(-30% to +20%) Three wire (L-L) / four wire (L-N, L-L)

Yes/No

Total Harmonic Distortion THD-U in %

Yes

Total Harmonic Distortion THD-I in %

Yes

Accuracy V / A 0.5 % Effective power class 1 Memory for onboard recording

Yes

Clock Yes PC End Software for data downloading

Yes

RS232 Yes RS485 Yes GPRS Optional

If we can’t measure We can’t manage

EMS & PQM from Janitza, Germany

Country representative of Janitza

3 in 1 monitoring solutions

Power quality monitoring which improves

reliability.

Energy monitoring system which improves

efficiency.

Residual current monitoring (RCM) which

improves safety.

Generic device (other make devices)

integration.

Flexible & scalable system architecture

Recording of all media such as electricity, gas,

water, steam.

Solutions for Communication and Software

Measurement of Current, Voltage, Power,

Active Energy, Reactive Energy, Power Factor,

and much more …

If we can’t measure We can’t manage

Din Rail mounted UPS from

J-Schneider GmbH

UPS ON CAPACITOR BASIS „C-TEC“

The DC UPS of the C-TEC 2410 series is equipped with

integrated ultracapacitors for accumulating energy.

During normal operation this capacitor is charged by an

internal charger which is supplied by an external,

regulated DC power supply. If the DC supply is

interrupted, energy of the ultracapacitors is released in a

regulated process (24 V DC ±2%). The load is supplied by

the buffer module until the capacitors are discharged.

The buffering time depends on the state of charge of the

capacitor and discharging current. Multiple modules can

be paralleled for achieving a longer duration of power

requirement.

Key Benefits:

Can operate at 60 Deg C which is not possible with

Batteries.

Recovery time for the Capacitor is very fast.

Ultracapacitors have a life expectancy of over 15

years.

UPS ON Battery BASIS „AKKUTEC“

The battery buffered DC power supply of the series

AKKUTEC is working according the stand-by parallel mode

and ensures in connection with a lead-acid accumulator a

safe continuous DC power supply in case of mains failure.

The back-up time is depending from the state of charge

of the accumulator and of the discharge current.

The power supply has the following features:

Battery charger with I/U-charging characteristics

Battery management by micro-controller

Battery voltage tracking of the charging voltage by

external sensor module (optional)

Power Supply

The UNOTEC 2405N is a switch mode power supply of

the latest generation, which is characterized by its high

efficiency and minimum power loss. It features Power

Boost and Hyper Boost function. The UNOTEC N can be

operated redundantly. Operation in series (2 units max.)

and parallel operation (up to 5 devices) are possible.

Because of modern architecture, it can work in

temperatures up to 60 ° C without load reduction.

If we can’t measure We can’t manage

AMI System with Matrica, Russia

AIMS "The Matrix" - an automated information-

measuring system based on the equipment of

LLC "Matrix", focused on the solution of a wide

range of tasks:

Remote accounting of consumption of

various types of resources (electricity, gas,

water, heat)

Software and / or remote control of

electricity consumption

Management of street lighting.

The system can be used in the private sector

(individual houses, apartment buildings,

offices), at the facilities of the state or public

facilities, in manufacturing plants, as well as

directly in the distribution network. AIMS "The

Matrix" significantly improves the payment

discipline, allows you to quickly detect

attempted theft of electricity, as well as to

determine the level of technical losses

DC Power System with EFORE, Finland

EFORE's highly reliable power supplies are

backed by over 40 years of design and

production experience, and include the well-

known ROAL brand of Digital Power and Digital

Light products. The company's extensive

standard AC/DC product portfolio covers a wide

power range from 6 watts to 1600 watts, and

includes open-frame, enclosed and sealed

package variations, highly configurable modular

solutions, and rack-mount power supplies.