M I L W A U K E E , I N C .

IMPACT CRUSHERS

M I L W A U K E E , I N C .

2

LIPPMANN HORIZONTAL IMPACT CRUSHERS PROVIDELOW COST, HIGH PRODUCTION, SIMPLICITY OF DESIGN

LIPPMANN IMPACT CRUSHERS...GREATER RELIABILITY, YOUR BEST VALUE

• Andreas Type Impact Crusher Design.

• Lippmann Impact Crushers Produce a Highly Cubical Product.

• High Ratio of Reduction.

• Hammers Have Four Crushing Positions to Maintain aMore Constant Gradation and Greater Top Size Control.

• No Weld Build-Up Required on Wear Surfaces.

• Less Capital Outlay Than Competitive Type Crushers.

• High Degree of Product Size Control.

• Long Life of Wear Components Due to Advanced Metallurgy.

• Ideal for Portable Mounting.

• One Gravity and One Spring Loaded Curtain With Optional ThirdCurtain. Easy Adjustment from Exterior of Crusher.

• Maintenance Thru Inspection Doors or by Hydraulically OpenedHood. Electric/Hydraulic Power Unit Standard.

Lippmann impactors have proven to be rugged, high performance andcost effective solutions in a variety of applications. Our customers willtestify to both outstanding service and investment value. Lippmannimpactors are successfully crushing a wide range of materials such as

Lippmann designs and supplies primary and secondary impact crushingplants. The 5165LS shown above in this modern aggregate processinginstallation is a highly popular plant for secondary crushing applications.

This Lippmann impactor is a brute of a crusher that handles concretefull of rebar, asphalt and other C&D debris to produce highly saleablematerials.

FIELD PROVEN EXPERIENCElimestone, dolomite, gravel, basalt, copper reverts, concrete andasphalt. Whether you need a portable, skid-mounted, or stationaryimpact crushing plant, we have the optimum, innovative solutionfor your specific needs.

3

M I L W A U K E E , I N C .

4

SUPERIOR QUALITY, MORE PORTABILITY AND BETTER FEATURES

The 4800 Series Impact Crushing Plants from Lippmann are theultimate, completely self-contained, easy to transport crushing plantsthat offer the features contractors need, like a larger crusher feedopening that devours concrete full of rebar, ripped asphalt and otherC&D debris.

The heart of the plant is a Lippmann 4248LP Impact Crusher, abrute that features a heavy duty rotor truly built to handle the dailypunishment of recycled materials.

• Lippmann 4248LP Impactorwith a True 34”x48” Feed Opening.

• 4716 Feeder with4’ Grizzly and By-Pass Chute.

• 48”x72” Pan FeederUnder the Impactor.

• 360HP Diesel, 75kW Generator Set.

• 48” Discharge Conveyor.

• 36” Permanent Magnet (optional).

• 62”x10’ Double Deck InclinedScalping Screen (optional).

• 400 F Abrasion-Resistant Hopper.

360HP Diesel Engine with75 kW Generator Set

4248LP Impactor34" Feed Height

48"x72" Pan Feeder

4716 Feederwith 4' Grizzly

36" Permanent Magnet(optional)

48" Discharge Conveyor By-Pass Chute

• Completely Self-Contained Plant• Pan Feeder Under Impactor Allows Rebar to Pass Easily Without Tearing the Belts• Optional Product Screen• Continuous Same Direction Material Flow

4800 SERIES

For aggregate applications, the 4248LP offers a greater reduction ratioand produces a high quality, uniform cubical product. Produce a varietyof saleable material, including highly cubical Superpave aggregate,while lowering your cost per ton.

For maximum efficiency, performance, ease of transportability andeasy set-up and tear down, the Lippmann 4800 will take you fromjob to job to make you more profitable! Ideal for small to mediumsize crushing projects.

4248LP – PRIMARY PORTABLE PLANT CONFIGURATION

4248LP

4248LP – PRIMARY PORTABLE PLANT CONFIGURATION

4248LP

5

FOR THOUSANDS LESS

• Lippmann 4248LP Impactorwith 34” Feed Height.

• 4716 Feeder with 4’ Grizzly.• 48” Rear Discharge Conveyor.• 62”x10’ Double Deck Screen

with Under Screen Hopper.• 20” Return Conveyor.• 2) 20” Cross Conveyors.• 48”x72” Pan Feeder

Under the Impactor.• 425 HP Diesel Motor and 100kW

Generator.• Hydraulic Legs.• 36” Permanent Magnet (optional).• Abrasion-Resistant Hopper.

425HP Diesel Motor& 100kW Generator

4716 FeederWith 4' Grizzly

4248LP Impactor34" Feed Height

48"x72" Pan Feeder

20" Return Conveyor

Hydraulic Legs (4)

Under Screen Hopper

36" Permanent Magnet (optional)

48" Rear Discharge Conveyor

62"x10' Double Deck Screen

2) 20" Cross Conveyors

The economical, multi-product 4818Prime Mover self-contained crushingand screening plant handles all typesof C&D debris and produces highquality, precisely-sized products.

• Lippmann 4248 Impactor.• 45”x18’ Heavy-Duty Grizzly

Feeder with Quick Removal Hopper.• 6’x16’ Double-Deck Incline Screen.• Removal On-Plant 350kW Generator.• Conveyor That Travels On Plant.• Cummins 460 HP Diesel Engine.

4248CC – CLOSED CIRCUIT PORTABLE PLANT CONFIGURATION

4818 PRIME MOVER CRUSHING & SCREENING PLANT

4248 CC

4248CC – CLOSED CIRCUIT PORTABLE PLANT CONFIGURATION

4818 PRIME MOVER CRUSHING & SCREENING PLANT

4248 CC

6

M I L W A U K E E , I N C .

AN IMPACT CRUSHING PLANT TO SUIT EVERY CUSTOMER NEED

Lippmann’s 6500 Series of portable impact crushing plants areengineered for high performance and superior transportability, easeof operation and versatility.

The Lippmann 5165LP primary portable crushing plant is a standard,cost effective unit for primary recycling of concrete or asphalt, and isavailable with hydraulic adjustment on the lower curtain. Variouslengths of Lippmann feeders are available, as well as a discharge pan

• Lippmann 5165LP Impactorwith 40” Feed Height.

• Hydraulic Adjustmenton Lower Curtain.

• 5820 Feederwith 4’ Grizzly.

• Grizzly Chute.

• 59”x78” HD Pan Feeder.

• Optional Cross Conveyor.

• Rock Box.

• Electric Motor.

• 10’ Wide Quad-Axle Suspension.

• 14’ Travel Height.

• Abrasion-Resistant Hopper.

6500 SERIES

5820 FeederWith 4' Grizzly 5165LP Impactor

40" Feed Height

Electric Motor

10' Wide Quad-Axle Suspension

Rock Box

Grizzly Chute

Optional Cross Conveyor

59"x78"Pan Feeder

feeder under the crusher. The 5165LP can also be used in the primarycrushing of medium aggregate and sand and gravel applications.

The Lippmann 5165LS is a secondary recycle or aggregate plant whichperforms well with Lippmann’s 3062 Jaw Plant in a two-stage recyclecrushing application, or with a Lippmann 3048 Jaw Plant in a two-stageaggregate crushing operation. The 5165LS is available with double ortriple deck screen.

5165LP – PRIMARY PORTABLE PLANT CONFIGURATION

5165LP

5165LP – PRIMARY PORTABLE PLANT CONFIGURATION

5165LP

7

• Lippmann 5165LSSecondary Impactor.

• 76x20 Triple Deck Screen.

• 48” Discharge Conveyor.

• 60” Under Screen Conveyor.

• (2) 24”x10’ Cross Conveyors.

• 300HP Electric Motor.

• Hydraulic Lift Legs.

• 10’ Wide Quad-Axle Suspension.

• 13’11” Travel Height.

• Abrasion-Resistant Hopper.10' Wide Quad-Axle Suspension

(2) 24"x10' Cross Conveyors

Lippmann Screen 76x20 Triple Deck

(4) Hydraulic Lift Legs Front and Back

Fold Down12" Extension Legs

5165LS Secondary Impactor

300HP Electric MotorElectrical Cabinet

48" Discharge Conveyor

60" Under ScreenConveyor

5165LS – SECONDARY PORTABLE PLANT CONFIGURATION

5165LS

5165LS

5165LS – SECONDARY PORTABLE PLANT CONFIGURATION

5165LS

5165LS

M I L W A U K E E , I N C .

8

SPECIAL APPLICATIONS

From the smallest tothe largest applica-tions, Lippmann cansolve your secondarycrushing needs. TheLippmann 4236LS isideal for secondaryor tertiary (with thirdcurtain) crushing ofaggregate, asphalt,concrete, gravel or limestone. Just a foot narrower than our 4248LS,the 4236LS is a tremendous value for applications where lowercapacity is required and lighter portability is desired. The 4236LS is agood solution for replacing a cone crusher on an existing cone chassis.

The Lippmann 5196LSis a high tonnagesecondary impactor,one of the widest inthe industry, featuringan unusually wide feedopening. Built for ultrahigh capacity, the5196LS can be usedin most secondarycrushing requirements including limestone, gravel, concreteand asphalt.

5196LS4236LS

SUPERIOR 2-STAGE CRUSHING SOLUTIONS

Lippmann offers you today’s best value in two-stageportable jaw/impact crushing systems. You canrely on quality machinery backed by the kind ofpersonal, single source application expertiseand product support only Lippmann can provide.

Lippmann custom engineers material processingsystems mounted on heavy duty chassis whichincorporate robust feeding, crushing, screening andconveying equipment designed for high productivity,easy transportability, quick set-up and tear down,and reduced wear costs. For recycling applications,plants feature magnetic separators, reinforcedbelting, special wear alloys and other options tosuit your specific requirements.

If you’re serious about recycle crushing or highproductivity aggregate processing, count onLippmann engineers to deliver two-stagecrushing solutions resulting in desired capacities,product flexibility, minimum downtime andincreased production.

9

If you are adding a bare crusher to a newstationary facility – or replacing an existingcrusher, our impactor will be matched to yourproduct requirements.

Feeding method is critical with an impactcrusher. Optional feed chute designs areavailable to allow the impactor to befed from three sides with a stacking conveyor.

Skid-type units are gaining in popularity. Whetherlooking to avoid high permanent structure costsor considering easy relocation in the future,this may be your solution. Standard designsare available offering low profile, fold-up legsand ample platform area.

PORTABLE, STATIONARY OR SKID MOUNTED, LIPPMANNOFFERS COST-EFFECTIVE SOLUTIONS FOR YOUR NEEDS

SHAFT ASSEMBLYThe rotor and shaft areheld with keyless lockingassemblies. Shaft ismade of premium, highalloy steel. The keylesslocking rings give superiorlocking capabilities overkeyed shaft applicationsthat experience impactbending loads. Keylesslocking assemblies areeasier to service.

HYDRAULIC HOODOPENINGElectric/hydraulic powerunit and hydraulic cylindersare provided as standardfor opening the hood,giving maximum space formaintenance. Rotor andhood locking devices areprovided for added safety.

LINER RETENTIONSYSTEMFrame and apron linersare drilled and tappedand use standard hexhead cap screws and lockwashers. Bolted designstays tight longer as the liner wears. Liners are a premium,abrasion-resistant material. A monoblock curtain liner isalso available.

M I L W A U K E E , I N C .

HAMMER LOCKING SYSTEMThe force of the jacking assemblycauses all the hammers and backingbeams to act as a solid mass whenstruck. This rigid, machined fitenables the use of more wearresistant, higher chrome hammersand yields more production beforeturning or replacing hammers.

HAMMER EFFICIENCYHammers are rectangular in shape with four wear edges.This shape will provide the most even production andproduct gradation. With proper usage of thefour flips (three flips for the 5860LP),the machine utilizes the maximumamount of the hammer weight,thus giving efficient utilizationof this wear component.

HAMMER REPLACEMENTMinimize the loss of valuable production time and labor. Vertical lifthammer replacement is one of the fastest and most efficient in the industry.

COMPONENTS... SIMPLE DESIGN WITH STANDARD PARTS

10

Simplicity of design, coupled withengineering focused on customerneeds, assures you ease ofmaintenance and superior wearparts. Results are less downtime –more production time.

GENUINE LIPPMANN PARTS – YOUR BEST VALUE• The right wear and replacement parts at the right price.• Immediate product support from people you know

and trust, American owned.• Unmatched availability, stocked right here in the U.S.• Lippmann quality, dependability, high wear resistance

and long life.• Application expertise to help you maximize profits.

A

CD

B

11

LIPPMANN MILWAUKEE, INC.HORIZONTAL SHAFT IMPACTORS

DIMENSIONS AND CAPACITIES

Lippmann Milwaukee, Inc.3271 East Van Norman Ave. • Cudahy, WI 53110-0586

(800) 648-0486 • (414) 744-2565 • Fax: (414) 744-8172Visit our web site at: www.lippmann-milwaukee.com

Sold & Serviced By:

The information contained in this literature is meant to be general in nature and is not intended to be used for specific application, construction, orinstallation purposes. Please note that machine capacities, settings, and other application considerations can vary from the information contained inthis literature, depending on the material being crushed, moisture, feed sizes, other materials in the feed, etc. As a result, no warranty of any kind, eitherexpressed or implied, is extended with the information contained in this literature. Lippmann Milwaukee, Inc. expressly reserves the right to changespecifications or designs without prior notice or obligation.

M I L W A U K E E , I N C .

THE NAME YOU SHOULD KNOW FOR QUALITY CRUSHING MACHINERY

1/05-5000 Printed in USA