INDUSTRIAL VENTILATION SOLUTIONS - Ardent · • General ventilation • Warehouse ventilation • Industrial ventilation • Retroﬁt or replacement • OEM • New construction

INDUSTRIAL VENTILATION SOLUTIONS

Direct Drive Panel Fan EDP-D-002

www.eldridgeusa.com

DIRECT DRIVE EDP PANEL FAN

• Spark resistant cast aluminum airfoil axial impeller • Aerodynamically efficient performance • Factory set adjustable pitch blades • Heavy duty welded steel construction • Simple maintenance - no belts or pulleys • TEFC industrial duty motor • Broad range of static pressures available • Sizes range from 12” to 60” • Direct drive capacities to 57,200 cfm

• Epoxy or polyurethane coatings • Motor side guard • Mounting boot - interior or exterior

mount • Motor operated shutters

• Propeller side guard • Weather hood complete with bird

screen • Gravity shutters • 304 stainless steel construction

• Special duty motors available • Bird screen for shutters • 316 stainless steel construction • Reverse flow construction

• Power plant ventilation • Foundry ventilation

• Factory ventilation • Warehouse ventilation

• General ventilation • Parking garage ventilation

FEATURES & BENEFITS

APPLICATIONS

ACCESSORIES & OPTIONS

9800 Richmond Avenue Houston, TX 77042 T: +1 713-780-7200

Toll-free: +1 844-780-7200

http://www.eldridgeusa.com

Belt Drive Panel Fan EBP-E-002

www.eldridgeusa.com

BELT DRIVE PANEL FAN

• Spark resistant cast aluminum airfoil axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient performance • Heavy duty welded steel frame and panel construction • Air dried enamel paint finish • TEFC industrial duty motor • Self-aligning pillow block ball bearings • V-belt drives for low speed operation • Sizes range from 24” to 72” • Belt drive capacities to 73,200 cfm

• Epoxy or polyurethane coatings • Motor side guard • Mounting boot - interior or exterior

mount • Motor operated shutters

• Propeller side guard • Weather hood complete with bird

screen • Gravity shutters • Variable pitch sheaves

• Explosion proof & special duty motors • Bird screen for shutters • Reverse flow construction • AMCA spark resistant construction

• Power plant ventilation • Foundry ventilation

• Factory ventilation • Warehouse ventilation

• General ventilation • Parking garage ventilation

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Direct Drive Panel Fan EPK-E-001

www.eldridgeusa.com

DIRECT DRIVE EPK PANEL FAN

• GRP (polypropylene) blades • Cast aluminum airfoil axial impeller available • Unit can be built for supply or exhaust configurations • Baked polyester powder coat finish • Sizes range from 12” to 36” • Direct drive capacities to 23,000 cfm • Stock components

• Inlet & outlet guards • Mounting boot

• Motorized & gravity shutters • Filter cabinet

• Reverse flow • Bird screen for shutters and weather

• General ventilation • Warehouse ventilation

• Industrial ventilation • Retrofit or replacement

• OEM • New construction

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Direct Drive Filtered Air Fan EDF-E-001

www.eldridgeusa.com

DIRECT DRIVE FILTERED AIR FAN

• Rugged cast aluminum impeller • OSHA style propeller guard • Removable filter box section • TEFC or explosion-proof motors, single or three phase • Disposable 2” filters are high capacity, pleated type that meet

MERV 8 rating

• Inlet weatherhood • Coatings for harsh environments

• Unducted paint booths • OEM machinery and equipment • Electrical cabinets

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Packaged Panel Fan EIP-E-001

www.eldridgeusa.com

PACKAGED PANEL FAN

• Can be used with exhaust or intake fans • Heavy gauge fan and shutter mounting box, factory mounted • Three types of shutters available:

• All aluminum gravity shutter for exhaust • Motor operated shutter for exhaust • Motor operated center pivoted for either supply or reversible

operation • OSHA compliant rear box guard:

• 12, 16, 18, 20 & 54 inch sizes are fabricated expanded metal • 24, 30, 36, 42, 48 & 60 inch sizes are formed wire five piece

guards

• Exterior weather hood recommended for intake

• Designed for use with Industrial Direct Drive Panel Fans • Simplify mounting in block, concrete, or metal walls • Use as an optional weather hood with bird screen

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Direct Drive Flange Fan EFK-E-001

www.eldridgeusa.com

DIRECT DRIVE FLANGE FAN

• GRP (polypropylene) blades • Cast aluminum airfoil axial impeller available • Heavy gauge steel • Unit can be built for supply or exhaust configurations • Baked polyester powder coat finish • Sizes range from 12” to 42” • Direct drive capacities to 40,000 cfm • Stock components

• Special coatings • Propeller side guard • Housing yoke with mounting bracket

• Mounting panel • Motor side guard • Special duty motors available

• E-Hive hood • Reverse flow construction • AMCA spark resistant construction

• General ventilation • OEM applications

• Circulation / recirculation units • Renewable energy

• Industrial drying • Marine / shipboard applications

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Hooded Roof Ventilator EDR-E-001

www.eldridgeusa.com

HOODED ROOF VENTILATOR

• Supply or exhaust applications • Direct drive or belt drive arrangements • Spark resistant, cast aluminum airfoil axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient performance • Heavy duty welded steel base • Air dried enamel paint finish • Aluminum hood with birdscreen • TEFC industrial duty motor • Direct drive units are easily maintained – no belts or pulleys • Belt drive units have self-aligning pillow block bearings • Belt drive units use v-belt drive for low speed operation

• Filtered intake unit • 2” thick disposable filters, for filtered

intake unit • Gravity shutter for exhaust only • Variable pitch sheaves for easy &

accurate adjustment

• Pre-fabricated roof curbs • Disconnect switch - mounted, or

mounted & wired • Epoxy or polyurethane coatings • Motor operated damper for supply or

exhaust applications

• Custom curb panel to match existing curb

• Explosion proof & special duty motors

• General ventilation • Fume and smoke exhaust

• Make-up air • Filtered air supply

• Heat exhaust

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Direct Drive Upblast Roof Exhaust Ventilator EDU-E-001

www.eldridgeusa.com

DIRECT DRIVE UPBLAST ROOF EXHAUST VENTILATOR

• Low silhouette weatherproof closure for vertical air discharge

• Direct drive, low maintenance • Spark resistant, cast aluminum airfoil

axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient

performance

• TEFC industrial duty motor • Weather-tight steel curb panel • Heavy duty welded steel construction • Air dried enamel paint finish • Rugged galvanized damper section

with butterfly damper blades • Damper rods turn in nylon bearings

and require no lubrication

• Epoxy or polyurethane coatings • Disconnect switches, mounted or

mounted & wired • Pre-fabricated roof curbs

• Hot dipped galvanized construction • Explosion proof motors • 304 or 316 stainless steel construction • Special duty motors

• Magnetic damper pads for positive closure

• General ventilation • Exhaust or smoke fumes

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Belt Drive Upblast Roof Exhaust Ventilator EBU-E-001

www.eldridgeusa.com

BELT DRIVE UPBLAST ROOF EXHAUST VENTILATOR

• Low silhouette weatherproof closure for vertical air discharge • V-belt drive for low speed operation • Spark resistant, cast aluminum airfoil axial impeller • Factory set adjustable pitch blades • Aerodynamically efficient performance • TEFC industrial duty motor • Self-aligning pillow block ball bearings • Weather-tight steel curb panel • Heavy duty welded steel construction • Air dried enamel paint finish • Rugged galvanized damper section with butterfly damper

blades • Damper rods turn in nylon bearings and require no

lubrication

• Epoxy or polyurethane coatings • Disconnect switches, mounted or mounted & wired • Pre-fabricated roof curbs • Hot dipped galvanized construction • Explosion proof motors • 304 or 316 stainless steel construction • Special duty motors • Magnetic damper pads for positive closure


FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Belt Drive Roof Exhaust Ventilator w/ Exterior Motor EBV-E-001

www.eldridgeusa.com

BELT DRIVE ROOF EXHAUST VENTILATOR W/ EXTERIOR MOTOR

• Standard upblast weatherproof closure for vertical air discharge

• V-belt drive for low speed operation • Spark resistant, cast aluminum airfoil

axial impeller • Factory set adjustable pitch blades • TEFC motor located outside of

airstream • Adjustable motor base with self-

aligning pillow block ball bearings

• Completely sealed belt tube to protect V-belt drive

• Extended lube lines • Heavy duty welded steel construction • Weather-tight steel curb panel • Air dried enamel paint finish • Rugged galvanized damper section

with butterfly damper blades • Damper rods turn in nylon bearings

and require no lubrication

• Epoxy or polyurethane coatings • Disconnect switches, mounted or

mounted & wired • Pre-fabricated roof curbs

• Hot dipped galvanized construction • Explosion proof motors • 304 or 316 stainless steel construction • Special duty motors

• Magnetic damper pads for positive closure


• Moisture laden air • Mild contaminates in the air stream

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Direct Drive Tubeaxial Fan EDT-E-001

www.eldridgeusa.com

DIRECT DRIVE TUBEAXIAL FAN

• Simple maintenance - no belts or pulleys

• Spark resistant, cast aluminum airfoil axial impeller

• Factory set adjustable pitch blades • Aerodynamically efficient

performance

• Heavy duty welded steel and angle ring construction

• Baked polyester powder coat finish • Mountable in ductwork in any position • TEFC industrial duty motor • Sizes range from 12” to 60” • Direct drive capacities to 61,000 cfm

• Horizontal mounting brackets • Motor side guard • Externally mounted and wired

junction box • Vertical mounting brackets • Propellor side guard

• 304 or 316 stainless steel construction • Mounting legs • Inspection door • Explosion proof and special duty

motors • Companion flanges

• Reverse flow construction • Baked epoxy powder coat finish, two

layers

• Process Ventilation • In-line duct booster

• General ventilation • Fumes, dust, or smoke removal

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Belt Drive Tubeaxial Fan EBT-E-001

www.eldridgeusa.com

BELT DRIVE TUBEAXIAL FAN

• Spark resistant, cast aluminum airfoil axial impeller

• Factory set adjustable pitch blades • Heavy duty welded steel and angle

ring construction • Baked polyester powder coat finish • Mountable in ductwork in any

position

• TEFC industrial duty motor; motor located outside of air stream

• Self-aligning pillow block ball bearings

• V-belt drives for low speed operation • Completely sealed belt tube protects

sheaves and belts from air stream • Extended lube lines • Shaft seal & water slinger

• Horizontal mounting brackets • Propeller side guard • 304 or 316 stainless steel construction • Vertical mounting brackets • Motor side guard • Maximum 375 F construction

• Mounting legs • Inspection door • Explosion proof & special duty motors • Companion flanges • Reverse flow construction • Motor cover and/or belt guard

• Variable pitch sheaves • AMCA spark resistant construction • Baked epoxy powder coat finish, two

layers

• Process ventilation • In-line duct booster

• Fumes, dust or smoke removal • General ventilation

• Moisture laden air • Contaminated air steams

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Centrifugal In-Line Fan ECI-E-001

www.eldridgeusa.com

CENTRIFUGAL IN-LINE FAN

• Backward curved airfoil (BCA) impeller • Non-overloading power characteristics • Super quiet, highly efficient performance • Rugged polyester powder coat finish • Custom mounting arrangements available • External junction box • Standard NEMA motors • Sizes range from 12” to 24”; capacities to 4,258 cfm

• Mounting feet • Motor side guard

• Explosion proof motors • Impeller side guard

• Inspection door • Special duty motors

• Process ventilation • Cabinet cooling • General ventilation

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Mixed Flow In-Line Fan EMF-E-001

www.eldridgeusa.com

MIXED FLOW IN-LINE FAN

• High capacity mixed flow impellers • Standard NEMA motors • Baked polyester powder coat finish • Custom mounting arrangements

available

• External junction box • Sizes range from 12” to 24”; capacities

to 5,340 cfm

• Mounting feet • Motor side guard

• Explosion proof motors • Inspection door

• Impeller side guard • Special duty motors

• Process ventilation • Cabinet cooling • OEM applications

FEATURES & BENEFITS

APPLICATIONS



Toll-free: +1 844-780-7200


Cast Aluminum Pressure Blower - 1EPB-E-001

www.eldridgeusa.com

CAST ALUMINUM PRESSURE BLOWER

• Cast aluminum radial blade wheel • Designed for highly efficient

performance • Spark resistant construction • Rugged cast aluminum housing • Circular inlet and outlet collars • Single of three phase TEFC motors

• CW or CCW rotation available; please specify

• Discharge rotatable to four positions • Suitable for 0-150ºF • Static pressures up to 11” w.g. • Capacities up to 3,410 cfm

• Flexible hose • Nozzle • Teflon shaft seal for corrosive

environments • Slide gate damper

• Explosion proof and special duty motors

• Inlet and outlet guard • Protective coating • Flanged inlet and outlet

• Vehicle exhaust • Exhausting smoke, fumes, and dust

from high pressure applications • Air knives

• Dust collection and material conveying

• Combustion air • High pressure cooling and drying

FEATURES & BENEFITS

APPLICATIONS


Toll-free: +1 844-780-7200



Cast Aluminum Pressure Blower - 2EPB-E-001

www.eldridgeusa.com

CAST ALUMINUM PRESSURE BLOWER


Toll-free: +1 844-780-7200


Industrial Ventilation Solutions IVS-E-001

WE PUT CREATIVE THOUGHT INTO VENTILATION


Toll-free: +1 844-780-7200

www.eldridgeusa.com



Documents

INDUSTRIAL VENTILATION SOLUTIONS - Ardent · • General ventilation • Warehouse ventilation • Industrial ventilation • Retroﬁt or replacement • OEM • New construction