Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
INSTALLATION INSTRUCTIONS
Product names listed herein are trademarks of AS America, Inc.© AS America, Inc. 2017
SA
VE
F
OR
F
UT
UR
E
US
E
- 1 -
RECOMMENDED TOOLS AND MATERIALSMost of the procedures require the use of common tools and materials, which are available from hardware and plumbing supply stores. It is essential that the tools and materials be on hand before work has begun.
Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
760237-101 (5/17)
TOILET SEAT TOP MOUNT & BOTTOM MOUNT
TOP MOUNT
Plumbers' Putty or CaulkingPhillips ScrewdriverFlat Blade Screwdriver
1A
3A
2A
4A
For ease of installation of black rubber grommets, insert steel bolt (capture a few threads), and wet the lower area with some water (soapy water works best).
Insert plugs into seat holes in bowl.
NOTE: FLANGE MUST REMAIN ABOVE THE SURFACE.DO NOT ALLOW GROMMET TO FALL THROUGH!
BOTTOM MOUNT1B - 9B
TOP MOUNT1A - 10A NOTE: Pictures may not exactly depict toilet
seat and components.
TOILET
Hinge Cover
Screws
Hinge
Hinge Washer Pad
Rubber Screw
PlugBolt
Flange
Bulb Wet this area with water
- 2 -760237-101 (5/17)
5A
7A
9A
6A
8A
10A
Place hinge cover over the hinges.
Place seat back on bowl and click seat onto hinges.
Place seat with hinges onto bowl. Align seat with front of bowl.
Open the seat and cover. Push both inside buttons to release seat and cover. Pull the seat and cover upwards to take it off the hinges.
Snap hinges with washer pad into holes on the bottom of the seat.
B
Hinge
Hinge Washer Pad
Install Hinge Washer Pad into Hinge.
A
Put screws into seat hinge and tighten using a screwdriver.
BOTTOM MOUNT
760237-101 (5/17)
3B
4B 5B
Snap hinges with washer into holes on the bottom of the seat.
With the bolts installed, thread the winged nuts, rubber washers and rubber plugs on to the bolts. Finger tighten only so that hinge can still turn.
Install hinge washer pad into hinge.
- 3 -
1B 2B
TOILET
Hinge Cover
Screws
Hinge
Hinge Washer Pad
Nut
Washer
Bowl Plug
Hinge
HingeWasherPad
Place seat with hinges onto bowl. Align seat with front of bowl.
760237-101 (5/17)
6B
8B
7B
9B
Place hinge cover over the hinges.
While holding the nut, use a screwdriver to tighten the hinge.
Place seat back on bowl and click seat onto hinges.
Open the seat and cover. Push both inside buttons to release seat and cover. Pull the seat and cover upwards to take it off the hinges.
In the United States:DXV by American StandardOne Centennial Avenue Piscataway, New Jersey 08855Attention: Director of Customer Care
For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 227-2734www.DXV.com
In Canada:DXV5900 Avebury Road Mississauga, Ontario L5R 3M3 Canada
Toll Free: 1-800-387-0369Local: 905-306-1093 Fax: 1-800-395-1498 www.DXV.ca
In Mexico:DXVVia Morelos 330 Col. Santa Clara Coatitla Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200www.DXV.mx
REPLACEMENT KITPART NUMBER DESCRIPTION
760234-100.XXX *SEAT MOUNTING KIT: INCLUDES BOTH TOP & BOTTOM MOUNTING HARDWARE*Includes a set of seat bumpers and all hardware needed for installation of seats.
- 4 -