Installing Tech2Win & Selecting a Drew Tech Device

1. Go to www.acdelcotds.com2. Log in.3. Choose I Accept at the bottom of the legal documentation and Continue.4. Choose Service and Programming Information.

5. Choose Access Your Subscription. Tech2Win is available through the Complete GM Service Support package, Tech2 andService Programming package, or separately from all other applications.

6. Click on the SWDL Tab.

7. Click on Start Software Download.

8. Choose Install from this screen. This will begin the installation of the core Tech2Win software.

9. Choose Next.

10. Check the box next to I accept and click Next.

11. Click Next. DO NOT change the Destination folder.

12. Click Install.

12. Wait for the Installation to complete. A command prompt dialog box may appear for a few seconds on your screen. This is anormal part of the installation process; do not attempt to close it or type in it.

13. Click Finish to complete the installation of the Tech2Win Core Software.

14. You should now see the white Tech2Win icon on your desktop.

15. You should see this screen once the installation is complete, click OK.

16. The below screen will open once you clicked the OK button above. STOP. You must have Tech2Win running to use thisapplication.

17. Open the Tech2Win application from the desktop icon.

18. The Tech2Win Configurator will open, click Default.

19. The below warning will open up. DONT PANIC. Just click OK.

20. Let the application boot to this screen. If the screen is hard to read, go to Options/Screen Resolution and choose a morecomfortable resolution for the Tech2Win window.

21. On the Software Download screen choose Custom and press Next.

22. Choose the Diagnostic package that applies to your area/vehicle application. Once you have selected the diagnostic packageand the correct language, Click the arrow pointing to the right.

23. Once you see the Diagnostic package on the right, click Download.

24. The download screen will come up, and will take a couple of minutes to download, you will see the Tech2Win screenscrolling while it is installing.

25. The finished screen will come up when the download is done, click Close.

26. The Tech2Win screen will have updated the number of days the license is good for in the lower right hand corner. On thescreen, you will see the software version of the diagnostic package.

27. Close the Tech2Win application. Run the DTTech2WinDriver application.

28. Follow the on screen prompts and install the driver to your computer.

29. Check the box next to I accept and click Next.

30. Do not change the install directory, just click Next.

31. Click Install on the next page.32. Click Finish when the installation is complete.33. Start the Tech2Win application and choose default from the profile page.

34. Choose Drew Technologies from the manufacturer selection menu, and click Ok.

35. Select your Device and click Ok.

36. Begin using Tech2Win.