25
Interoperability Report - Ascom i62 / Aerohive Networks 1 2017-08-21 INTEROPERABILITY REPORT Ascom i62 Aerohive Networks, AP121, 130, 230, 250, 550 HiveOS version 8.0r1 (AP 130/230/250/550 – 8.0.r1, AP121- 6.5r7) Ascom i62 and OEM derivatives version 5.5.0 Ascom, Gothenburg August 2017 [ ]

INTEROPERABILITY REPORT Ascom i62 Aerohive · PDF fileInteroperability Report - Ascom i62 / Aerohive Networks 3 2017-08-21 INTRODUCTION This document describes necessary steps and

Embed Size (px)

Citation preview

  • Interoperability Report - Ascom i62 / Aerohive Networks 1 2017-08-21

    INTEROPERABILITY REPORT Ascom i62 Aerohive Networks, AP121, 130, 230, 250, 550 HiveOS version 8.0r1 (AP 130/230/250/550 8.0.r1, AP121- 6.5r7)

    Ascom i62 and OEM derivatives version 5.5.0

    Ascom, Gothenburg

    August 2017

    [ ]

  • Interoperability Report - Ascom i62 / Aerohive Networks 2 2017-08-21

    TABLE OF CONTENT: INTRODUCTION ........................................................................................................................... 3

    About Ascom ............................................................................................................................ 3About Aerohive Networks ......................................................................................................... 3

    SITE INFORMATION .................................................................................................................... 4SUMMARY .................................................................................................................................... 5

    General conclusion ................................................................................................................... 6Known issues ............................................................................................................................ 6

    APPENDIX A: TEST CONFIGURATIONS .................................................................................... 7Aerohive HiveManager and Access Points configurations. ...................................................... 7

    ESS, Security settings. .......................................................................................................... 7Quality of Service (QoS) ..................................................................................................... 14Radio Configuration ............................................................................................................ 17

    Ascom i62 ............................................................................................................................... 21Innovaphone IP6000 (IP PBX) ................................................................................................ 23

    APPENDIX B: DETAILED TEST RECORDS .............................................................................. 24

  • Interoperability Report - Ascom i62 / Aerohive Networks 3 2017-08-21

    INTRODUCTION This document describes necessary steps and guidelines to optimally configure the Aerohive Networks solutions WLAN platform with Ascom i62 VoWiFi handsets.

    The guide should be used in conjunction with both Aerohives and Ascoms configuration guide(s).

    About Ascom Ascom is a global solutions provider focused on healthcare ICT and mobile workflow solutions. The vision of Ascom is to close digital information gaps allowing for the best possible decisions anytime and anywhere. Ascoms mission is to provide mission-critical, real-time solutions for highly mobile, ad hoc, and time-sensitive environments. Ascom uses its unique product and solutions portfolio and software architecture capabilities to devise integration and mobilization solutions that provide truly smooth, complete and efficient workflows for healthcare as well as for industry and retail sectors. Ascom is headquartered in Baar (Switzerland), has subsidiaries in 15 countries and employs around 1,200 people worldwide. Ascom registered shares (ASCN) are listed on the SIX Swiss Exchange in Zurich

    About Aerohive Networks Aerohive (NYSE: HIVE) enables our customers to simply and confidently connect to the information, applications, and insights they need to thrive. Our simple, scalable, and secure platform delivers mobility without limitations. For our customers worldwide, every access point is a starting point. Aerohive was founded in 2006 and is headquartered in Milpitas, CA. For more information, please visit www.aerohive.com, call us at 408-510-6100, follow us on Twitter, join our LinkedIn group, subscribe to our blog, or become a fan on our Facebook page.

  • Interoperability Report - Ascom i62 / Aerohive Networks 4 2017-08-21

    SITE INFORMATION

    Test Site(s): Ascom US 300 Perimeter Park Dr Morrisville 27560 NC Participants: Karl-Magnus Olsson, Ascom HQ, Morrisville, NC TEST TOPOLOGY

  • Interoperability Report - Ascom i62 / Aerohive Networks 5 2017-08-21

    SUMMARY Please refer to Appendix B for detailed results for respective access point. WLAN Features

    High Level Functionality Result Association, Open with No Encryption OK Association, WPA2-PSK, AES Encryption OK Association, PEAP-MSCHAPv2 Auth., AES Encryption OK Association, EAP-TLS Auth., AES Encryption OK Association, Multiple ESSIDs OK Beacon Interval and DTIM Period OK PMKSA Caching OK* WPA2-opportunistic/proactive Key Caching OK* WMM Prioritization OK Active Mode (load test) OK 802.11 Power-save mode OK 802.11e U-APSD OK 802.11e U-APSD (load test) OK *) Enabled by default Roaming

    High Level Functionality Result Roaming, Open with No Encryption OK (typical roaming time 24ms) * Roaming, WPA2-PSK, AES Encryption OK (Typical roaming time 52ms)* Roaming, PEAP-MSCHAPv2 Auth, AES Encryption OK (Typical roaming time 42ms)* /**

    *) Average roaming times are based on results from 802.11a/n. Refer to Appendix B for detailed test results * *) Measured times is with opportunistic/proactive Key Caching enabled (default enabled)

  • Interoperability Report - Ascom i62 / Aerohive Networks 6 2017-08-21

    General conclusion The result of the verified test areas, such as authentication, association, handover and call stability test, produced in very good results. The roaming times, both PSK and 802.1x were excellent by ranging in the interval 25 to 50ms. Performance has also been proven to be very good. In both active and U-APSD mode it was possible to keep up 12 simultaneously calls per AP one single access point. Keep in mind that the limitation was available handsets and not system capacity.

    Known issues

    No known issues

  • Interoperability Report - Ascom i62 / Aerohive Networks 7 2017-08-21

    APPENDIX A: TEST CONFIGURATIONS

    Aerohive HiveManager and Access Points configurations. In the following chapter you will find screenshots and explanations of basic settings in order to get the Aerohive Networks solution operational with Ascom i62. Please note that security settings were modified according to requirements in individual test cases. The configuration file is found at the bottom of this chapter. ESS, Security settings.

    List of all configured SSIDs

  • Interoperability Report - Ascom i62 / Aerohive Networks 8 2017-08-21

    WPA2 PSK (Personal)

    - Select WPA/WPA2 PSK (Personal) - Select WPA2-PSK and CCMP and Key Management and Encryption Method - Key can be entered in HEX or in ASCII format. Example shows a key entered in ASCII format.

  • Interoperability Report - Ascom i62 / Aerohive Networks 9 2017-08-21

    WPA2 802.1X (Enterprise)

    - Select WPA/WPA2 802.1X (Enterprise) - Select WPA2-802.1X and CCMP and Key Management and Encryption Method - Make sure that Enable Proactive PMK ID response is checked.

  • Interoperability Report - Ascom i62 / Aerohive Networks 10 2017-08-21

    WPA2 802.1X (Enterprise) RADIUS configuration

    - Configure the IP Address to the Radius server - Type in the secret that corresponds to the secret configured in the Radius server.

  • Interoperability Report - Ascom i62 / Aerohive Networks 11 2017-08-21

    Data rate configuration. (Same for all encryption methods)

    - To improve the performance in the wireless system it is recommended to disable the lowest data rates.

  • Interoperability Report - Ascom i62 / Aerohive Networks 12 2017-08-21

    Advanced SSID settings (Same for all encryption methods)

    - Set the DTIM settings to 5. DTIM value 5 is recommended in order to allow maximum battery conservation without impacting the quality. A lower value is possible but will negatively impact the standby time.

    - Make sure Enable WMM is checked. - Make sure Enable Unscheduled Automatic Power Save Delivery is checked.

    Important. Ascom i62 do not support 802.11k,v,r. Do not enable the Voice Enterprise parameters.

  • Interoperability Report - Ascom i62 / Aerohive Networks 13 2017-08-21

    User Profile.

    - Use the default Rate Control & Queuing Policy. See section QoS for details.

  • Interoperability Report - Ascom i62 / Aerohive Networks 14 2017-08-21

    Quality of Service (QoS)

    Classifier Maps

    - Create classifier map according to the screenshot and enable DiffServ and 802.11e - Important. For DiffServ 40-47 select QoS Class: 6 Voice.

  • Interoperability Report - Ascom i62 / Aerohive Networks 15 2017-08-21

    Marker Maps

    - Create a Marker Map. Note that these are the system default values.

  • Interoperability Report - Ascom i62 / Aerohive Networks 16 2017-08-21

    Rate Control & Queuing

    - Make sure that the system default values look as per above.

  • Interoperability Report - Ascom i62 / Aerohive Networks 17 2017-08-21

    Radio Configuration

    Radio Profiles. (5Ghz)

    - Example shows the default profile radio_ac0 (default 11ac profile) - Channel with is set to 20Mhz but 40Mhz has also been verified. For additional info refer General