ISTA 6 - Amazon.com SIOC - B Received Date: FEB 27,2019 ... · LAB TEST REQUEST {filled out by requestor} Test Requestor / Project Name / Submission Date FEB 27,2019 Due Date MAR

ISTA 6 - Amazon.com – SIOC - B Test Report_External

VERSION DATE: 5/9/2018

(6619)057-1063 Received Date: FEB 27,2019 Report Date: MAR 04,2019

Page 1 of 11

Bureau Veritas Consumer Products Services Division (Shanghai) No.168, Guanghua Road, Zhuanqiao Town, Minhang, Shanghai, China, 201108 Tel: 86-21-24166888, Fax: 86-21-64891984 Email: [email protected] website:cps.bureauveritas.com

This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at

http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or

for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the

test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken

or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the

information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify

us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall

specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this

report, the tests conducted and the correctness of the report contents.

ITEM INFORMATION

Vendor/Seller Name: MOXY INVESTMENT LIMITED

ASIN: B07HGVFHYR

Item: /

UPC: /

Certification Passed: Pass: Tier 1- Frustration Free Packaging (FFP) Pass: Tier 2- Ships In Own Container (SIOC)

Fail: Tier 3- Enforced Over Box (EOB)

LAB INFORMATION

Testing Lab: BUREAU VERITAS CONSUMER PRODUCTS SERVISE SH CO., LTD

Location: SHANGHAI, CHINA

Date of Test: 3/1/2019

ISTA Member/ Lab Tech: ST-2325/ JARED JI

TEST RESULTS

Tested Item Summary

Number of Samples Tested Number of Samples Passed Number of Samples Failed

1 1 NO

Corrugate Board Strength BST: 385 lbs/in2 / ECT: 75.2 lbs/in

EPS DENSITY

Part Component Dimensions (in.) Weight Density (kg/m3)

/ / / / /

http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/




Page 2 of 11

Post Test Comments:

Overview

THE SAMPLE WAS NO DAMAGE NOTED AFTER SIOC TYPE B TESTING

Product Condition

NO DAMAGE NOTED

Packaging Condition

NO DAMAGE NOTED

LAB TEST REQUEST {filled out by requestor}

Test Requestor /

Project Name /

Submission Date FEB 27,2019

Due Date MAR 04,2019

ASIN Manufacturer Description

B07HGVFHYR UE FURNITURE CO., LTD.

STACK CHAIR (MODEL: XDD1Q)

Package Dimension 81.5*56*68 cm / 32-3/8 x 22-1/4 x 27 in.

Package Weight 34.2 KG / 74.2 lbs.

Classification 1 SIOC

Classification 2 Parcel

Test Type ISTA 6 –Amazon.com SIOC - B

Value Add Packaging (VAP)

No

Value Add Packaging (VAP) Info

MASTER CARTON: Corrugated board, Polybag, Foam sheet, plastic bubble sheet, cable tie

Total Test Samples 1 MASTER CARTON

Additional Notes N/A




Page 3 of 11

PRE-TEST INSPECTION {filled out by lab}

Product Condition Package was not opened before testing to review product.

Package Condition NO DAMAGE NOTED

Package Condition before testing

☒ ORIGINAL as arrived in the lab for testing

☐ NEW re-packaged with new materials before testing

Corrugated Info (Box Cert if available)

Double wall corrugated board

Dunnage Info NA

Additional Notes NA

PRE-TEST PICTURES

Six sides of the ASIN package should be numbered and photographed. If a box cert is present it should be taken and recorded.

Isometric picture views should be taken as called out below. Pictures of special call outs and or damage should have description

of location and detailed information in the text box below the picture.

Side 1 Side 2 Side 3




Page 4 of 11

PRE-TEST PICTURES {continued}

Side 4 Side 5 Side 6

ISO #1 Side 1/2/5 ISO #2 Sides 3/4/6




Page 5 of 11

TEST DETAIL

Items in black were completed and values updated. Items left in gray were not completed.

Test Value P/F P/F P/F P/F P/F OBSERVATIONS

BLOCK 1:Temp and Humidity 23ºC and 48% RH

P

Ambient Lab Temp 12+ hours

BLOCK 2: Drop 1-7 18 INCHES P NA NA NA NA NO DAMAGE NOTED

BLOCK 2: Drop 8 36 INCHES P NA NA NA NA NO DAMAGE NOTED


BLOCK 3: Tip/Tip Over NA NA NA NA NA NA NA

BLOCK 9: Compression

Face 3: 965 Lbs / 1 hour.

P NA NA NA NA

NO DAMAGE NOTED

BLOCK 10: Clamping Simulation

Face 5-6: 297 Lbs.

Face 2-4: 297 Lbs.

P NA NA NA NA

NO DAMAGE NOTED

BLOCK 12: Vib with Top Load Face 3 265 Lbs. P NA NA NA NA

NO DAMAGE NOTED


NO DAMAGE NOTED


NO DAMAGE NOTED

BLOCK 12: Vib Face 3 (Pick-Up Truck) 0 Lbs. P NA NA NA NA

NO DAMAGE NOTED

BLOCK 15: Drop 10-15 18 INCHES P NA NA NA NA NO DAMAGE NOTED



BLOCK 21: Rotational Edge Drop NA NA NA NA NA NA NA

BLOCK 22: Full Rotational Flat Drop NA NA NA NA NA NA NA

BLOCK 23: Bridge Impact NA NA NA NA NA NA NA

BLOCK 24: Concentrated Edge Impact NA NA NA NA NA NA NA

BLOCK 25: Leak Test NA NA NA NA NA NA NA




Page 6 of 11

TEST PICTURES

Pictures should be taken of each block test set up along with a post picture taken of the item at the end of each test block.

Additional pictures of damage should have locations noted, size of damages measured, and written in text box below them.

Block 2 Test Set Up Block 2 Post Test Item Picture






Page 7 of 11

TEST PICTURES {continued}




Block 12 Face 3 Test Set up Block 12 Face 3 Post Test Item Picture Block 12 Face 3 Test Vibration Profile





Page 8 of 11



Block 12 Face 3 (Pick-Up) Test Set up Block 12 Face 3 Post Test Item Picture Block 12 Face 3 Test Vibration Profile






Page 9 of 11


POST TEST PICTURES

Isometric views of the box should be taken as called out in first two picture spots. An exploded bill of materials (BOM) view

should be added to the third slot. Additional pictures of damage should have locations noted, size of damages measured, and

written in text box below them.

ISO #1 Side 1/2/5 ISO #2 Sides 3/4/6 Exploded BOM View




Page 10 of 11

POST TEST PICTURES {continued}

Packaging photo 1 Packaging photo 2 Packaging photo 3

Packaging photo 4 Packaging photo 5 Packaging photo 6




Page 11 of 11

BVCPS (SHANGHAI) GENERAL CONTACT INFORMATION FOR THIS REPORT

TELEPHONE NO

E-MAIL:

86-21-24166888

[email protected]

BUREAU VERITAS

CONSUMER PRODUCTS SERVICE DIVISION (SHANGHAI)

Laboratory Test location: No. 368, Guangzhong Road, Zhuanqiao Town, Minhang,

Shanghai.

No. 168, Guanghua Road, Zhuanqiao Town, Minhang, Shanghai.

JARED JI

SUPERVISOR (HARDLINE DIVISION)

END OF REPORT

mailto:[email protected]

Documents

ISTA 6 - Amazon.com SIOC - B Received Date: FEB 27,2019 ... · LAB TEST REQUEST {filled out by requestor} Test Requestor / Project Name / Submission Date FEB 27,2019 Due Date MAR