PSI Incontrol Sdn Bhd

ITEC SCADA & DMS

2

ITEC SCADA & DMS

Our world today depends on reliable and

readily available power. High investments

into the generation, transmission and

distribution systems have been made by the

utilities over the years to guarantee this

supply. It is the task of the control center

operators to make best and most efficient

use of the installed system. SCADA/DMS

is the tool that helps the operators to keep

the overview over the large networks and to

control the energy related processes

optimally.

PSI Incontrol Sdn. Bhd. is an established

and fast growing organization backed by

dedicated, qualified and richly experienced

team of engineers, technicians and skilled

workforce. We have full in-house capability

of complete engineering, implementation,

testing and commissioning of large scale

SCADA/DMS.

Our solution redefines redundancy

requirements by eliminating ‘Hot/Standby’

philosophies with every server capable of

taking over the entire functions in the

control centre.

Multiplicity of Protocols have been

integrated for the signals from the field.

IEC 870-5-101, WISP+, Harris H6000,

IEC870-5-104 are some of the protocols

implemented in the delivered SCADA/

DMS. Besides, TASE.2 protocol also

implemented for inter-control center

communication.

Our solution is based on the PSIcontrol,

the SCADA/DMS solution developed by

PSI AG, the world leading company in

Introduction

3

PSI AG develops and integrates complete

solutions, on the basis of its own software

products, for the management of energy

networks (electricity, gas, oil, heat and

water), cross -company production

management (metals, automotive,

mechanical and plant engineering, logistics)

and infrastructure management for

telecommunications, transport and safety.

PSIcontrol was developed for an extensive

productivity increase in strategic network

operation. The solution enables a small

team operator to efficiently manage very

large networks with high-density grid

infrastructures. Stability and reliability are

maintained, even with extreme influxes of

information.

The unique system technology in

PSIcontrol creates the platform for the

optimum control system as well as the

control system being accepted by network-

operation staff. The distinguishing

characteristics within the applications are

based on exceptional network capabilities

and the use of communication technology

standards.

The control system is made up of

structured levels. The bottlenecks of

conventional centrally-organized master-

slave systems are no longer an issue with

the system architecture of PSIcontrol.

PSI AG & PSIcontrol

ITEC SCADA & DMS

4

While developing PSIcontrol, our goal was

to create a reliable and complete solution

for today’s energy management needs. Our

software is separated between application-

oriented operation management features,

data management functions and advanced

system simulators.

Operations management features in

PSIcontrol work in tandem with the data

management functions. This includes

Online-Process Management and Data

Engineering.

Our data management system is responsible

for all operational aspects of a network

control system. Technical functions in

PSIcontrol have programmed data

redundancy which guarantees reliability

and gives the control system dependable

stability. Other features manage data model

changes and modeling the supply network

giving system operators more manageability.

With PSIcontrol, we offer a software

solution with unmatched data quality and

the highest level of integration capability in

the IT world. Our software has internal

structure separation to ensure that each

component functions at its best, yet the

synergy between the components allows for

the creation of a cohesive and intuitive tool.

The Main Components of PSIcontrol

ITEC SCADA & DMS

5

The operations management component in

PSIcontrol is responsible for managing

energy networks as well as programs and

data models for online monitoring.

All technological processing functions

The programs and data for human-

machine communication

The functions for linking components.

We believe that an excellent time response

of the process management functions is an

integral design feature. Even with large

information loads and simultaneous

operations across all workstations of the

system, it is crucial to have the shortest

processing and response times possible.

As network management centres grow, the

technological functions and the intuitive

human-machine communication within

PSIcontrol becomes ever increasingly

important.

The task of PSIcontrol is to condense,

visualize, and convey information to the

operator so they can quickly and intuitively

understand and react to the situation.

Rising costs are forcing energy providers to

the technical limits of the network. With

the development of smart grids and smart

metering the amount of information for

control systems to process has greatly

increased. As this trend continues, better

and more effective functionality will be

demanded. A positive effect is that with the

additional information, even better analysis

can be done by the control system. Due to

its outstanding dynamic characteristics and

the comprehensive higher-value functions,

PSIcontrol is ideally equipped for these

future tasks.

ITEC SCADA & DMS

Operations Management

6

Data management handles all specification

data for :

All technological processing functions

Primary and secondary technical

processes

Technical information linking elements

of the energy networks

Technological processing

Human-machine communication

From here, data models are generated for

the programs managing the system. A

considerable reduction in costs is achieved

while at the same time increasing the

quality of data. This is a noteworthy feature

of data management in PSIcontrol.

When possible, required data from SAP

and GIS are comprehensively imported into

the control system. For import-orientated

data management, PSIcontrol has special

program modules :

Import functions with verification of the

imported data

Programs for the largely automated

establishment of equipment graphics

Refinement of GIS graphics

Automated data and function test.

Data Management

ITEC SCADA & DMS

7

As the size of a network grows, so does the

importance of regular realistic training for

network managing personnel.

Simulators developed by PSI offer training

on any fault scenario for transmission and

distribution networks. The simulators

utilize network specification data from the

associated control system operators train

with their ‘own’ workstation.

At the core of PSIcontrol are the network

application programs with exceptionally

short and quick computation times. These

are also useful for the realistic modeling of

network protection equipment. The

simulator models the operation of

protection equipment and the location of

short circuits at random locations of the

network. The possible specification of

random primary or secondary equipment

faults shows the operation of the back up

protection in the event of a fault.

By modeling all important protective relay

types, the simulator makes it possible to

verify safety concept settings. For safety

experts this can be very effective tool.

PSI developed telecontrol solutions in-

house. With our in-house telecontrol

technology, we can use modern and

substantially more efficient technologies for

our hardware solutions.

PSI’s family of high-quality telecontrol

devices offers optimum solutions for a wide

range of equipments. With the components

of this mopdular system, efficient and cost-

effective interfaces can be configures for

standard tasks. The flexibility of this

technology also allows the implementation

of project-specific solutions.

Simulator Front End Gateway Technology

ITEC SCADA & DMS

8

The human-machine interface (HMI) allows

the operator to utilize all aspects of a

PSIcontrol network control system.

Whether a control system is accepted by the

network operators greatly depends on the

quality and operability of the human-

machine interface. In addition to our

advanced intuitive features, the PSI HMI

has an incredibly fast response time.

PSI decided in 1985 to develop the entire

HMI software in-house. This decision was

the foundation for many of our

innovations. To date, PSI has invested

more than 130 years of manpower into

creating our HMI. Our HMI technology is

one of the supporting pillars of PSIcontrol.

Only through the complete in-house

development have we been able to develop :

Visualization with technological

intelligence

Geo-referencing

Tandem workstation operation

These features opened up entirely new

control configuration possibilities of the

human-machine interface. We invite you to

attend one of our in-house demonstration

lab and see for yourself.

The complex task of network system

operators require string support from the

supervisory control and data acquisition

(SCADA) functions of the network control

system. Topology is a very important

component for operational management

functions.

Topological network colouring

Topological interlock checks

Fault analysis

Operations management uses fault analysis

to rapidly and safely re-supply healthy but

de-energized network areas. The system

determines the required network

disconnections and automatically creates a

switching sequence for resupplying the

network. In ground fault areas, the fault

analysis automatically determines the

optimum order of needed switching

sequences to find and contain a ground

fault. The necessary switching commands

can then be sent automatically.

The Human-Machine Interface

ITEC SCADA & DMS

9

PSIcontrol is equipped with extensive

network calculation programs for all supply

segments. The following essential

application areas can be specified for the

network calculations :

Evaluating the current network status

Network forecasts

Network calculations for operation and

network expansion plan

A high degree of automation, growing

network utilization, extensive energy

transports and the ever growing influence

of regenerative energies; these are the key

phrases for the current state of our

electrical networks.

This development makes demands for

reliable and significant evaluation of

network security. At the same time there

are opportunities for optimum economical

operation.

Demands and opportunities of energy

providers are both met with the effective

network calculation features of PSIcontrol.

They were designed for the varied tasks of

network control technology. PSI software

solutions offer stability you can rely on and

outstanding performance.

All calculation modules in PSIcontrol are

100% in-house developments. This is the

only way for us to be able to quickly react

to future requirements of energy providers.

Network calculation functions are place for

evaluating the current network state and

foreseen simulation calculations (e.g.

DACF process).

Network Calculations

ITEC SCADA & DMS

Available network calculation

functions in PSIcontrol :

State estimation

Load flow simulation

Short circuit analysis

Contingency analysis

Load flow optimization

Bottleneck correction

Node load adaptation

Sectioning point optimization

10

Our Customers

ITEC SCADA & DMS

Malaysia SCADA/DA System for TNB

Metro Region - Putrajaya, Selangor and Wilayah Persekutuan

SCADA/DA System for TNB Nothern, Eastern and Southern Regions

Comprehensive Hardware and Software Annual Maintenance Contract (AMC) for TNB MRCC

Comprehensive Hardware and Software Annual Maintenance Contract (AMC) for TNB NERCC

Comprehensive Hardware and Software Annual Maintenance Contract (AMC) for TNB SRCC

Video Wall System for Eastern Regional Control Centre (ERCC) and Backup Control Centre (BCC)

Thailand

Distribution Management System (DMS) Master System for Provincial Electricity Authority (PEA)

Distribution Management System (DMS) for Metropolitan Electricity Authority (MEA)

Iran Ardabil and Uromieh Sub-Master

Dispatching Centers for Azarbaijan Regional Electric Company (AREC)

New Control System for Khoozestan Regional Electric Company (KzREC)

Mazandaran and Golestan RDC Master Plan for Mazandaran Regional Electric Company

Rwanda

SCADA/EM System for Electrogaz, Kigali

Oman

Construction of MEDC Distribution SCADA System, Muscat Electricity Distribution Company (MEDC)

Building Partnerships Through Empowered People

ITEC SCADA & DMS

MAIN OFFICE

PSI INCONTROL SDN BHD (414225-K) (formerly known as Incontrol Tech Sdn Bhd)

No. 15, Jalan BRP 9/1D, Perusahaan Bukit Rahman Putra, 47000 Sungai Buloh, Selangor Darul Ehsan, MALAYSIA Phone : +603 6157 8050 Fax : +603 6157 8060 E-Mail : info_KUL@psi-incontrol.com

www.psi-incontrol.com

BRANCH OFFICES

INCONTROL TECH CO. LTD. 1000/52/53, PB Tower Building, 14th Floor, Sukhumvit 71 Road, Kwang Klongton Nua,

Wattana District 10110, Bangkok, THAILAND.

Phone : +66 2713 1956 Facsimile : +66 2713 1762

E-Mail : info_BKK@psi-incontrol.com

INCONTROL TECH PVT. LTD. 25, 6th Main Road,

New Colony, Chrompet Chennai 600044, INDIA.

Phone : +91 446 555 1384 E-Mail : info_MAA@psi-incontrol.com

PSI INCONTROL (OMAN BRANCH) North Mawaleh, Seeb,

House #9473, Way #897, Muscat, The Sultanate of OMAN.

E-Mail : info_MCT@psi-incontrol.com