Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
J A C TO N IN D U S T RY C O. ,LT D TEL: 86-769-81585810, 81585852 SKYPE: jactonjack EMAIL: [email protected] WEB: www.screw-jack.com
L I F T I N G S Y S T E M S S O L U T I O N S
JTM-SERIES WORM SCREW JACK
S C R E W J A C K S M I T E R G E A R B O X E S
L I F T I N G S Y S T E M S S Y S T E M S AC C E S S O R I E S
C U S T O M S C R E W J A C K S C U S T O M A C M E S C R E W S
* JTM2.5, JTM5, JTM10, JTM25, JTM50, JTM100, JTM150, JTM200, JTM300, JTM500,JTM750, JTM1000
* Lift force from 2.5kN to 980kN, customized higher lift force screw jack
* Self locking trapezoidal screw, precise positioning, uniform lifting speed
* Translating screw, anti-rotation keyed screw and rotating screw configurations
* Upright mounting, inverted mounting, double clevis pivot mounting
* Top plate, threaded end, clevis end and plain end fittings
* Hand operated, electric driven or both
* Individual or multiple screw jack system arrangements
* Each jack has two worm gear ratios, high speed, low speed
* No standard travel length, all screw jack stroke produced following your needs
Translating Screw Design
A translating screw jack has a jack screw translates through the jack housing, When the jack screw is held to
prevent rotation, the jack screw will move linearly through the housing to push or pull the load. The screw may
produce rotary force when lifting, so anti-rotation measures should be adopted.
Rotating Screw (Travel Nut) Design
A rotating screw jack has a jack screw which turns moving a travel nut. The jack screw is fixed to the worm gear.
The load is attached to the travel nut, to move along the jack screw. Due to its cylindric structure, supporting mode
is often used at the screw end to ensure good transmission of long stroke.
Keyed Screw (Anti-Rotation) Design
The jack screw of a translating jack must be attached to the load which prevents the jack screw from rotating.
Otherwise, the jack screw and the load will turn and not translate. A keyed screw jack can prevent jack screw
rotation, With square protective tube anti-rotation device or milled keyway matching keys, the screw travels up
and down only and produces no rotary force.
ModelJTM 2.5
JTM 5.0
JTM 10
JTM 25
JTM 50
JTM 100
JTM 150
JTM 200
JTM 300
JTM 500
JTM 750
JTM 1000
Maximum load (kN) 1.96 4.9 9.8 24.5 49 98 147 196 294 490 735 980
Outer diameter of screw (mm)
12 16 20 26 40 50 55 65 85 120 130 150
Root diameter of screw (mm)
8.8 10.8 14.8 19.7 30.5 38.4 43.4 51.3 67 102 112 127
Screw pitch (mm) 3 4 4 5 8 10 10 12 16 16 16 20
Ratio iH 5 5 5 6 6 8 8 8 10 2/3 10 2/3 10 2/3 12
L 20 20 20 24 24 24 24 24 32 32 32 36
Screw travel mm per turn of worm
H 0.6 0.8 0.8 0.83 1.33 1.25 1.25 1.5 1.5 1.5 1.5 1.67
L 0.15 0.2 0.2 0.21 0.33 0.42 0.42 0.5 0.5 0.5 0.5 0.56
Efficiency% η
H 26 26 21 21 22 22 20 20 19 15 13 13
L 15 15 12 12 14 15 14 13 11 10 8 8
Permissible max. power (kw)
H 0.16 0.39 0.49 1 2 2.8 3.1 5 8.4 13.4 14.4 21.4
L 0.08 0.18 0.36 0.46 0.63 1.4 2.2 3.2 4.6 5.7 7.2 9.4
No-load torque To (Nm)
0.11 0.11 0.29 0.62 1.4 2 2.6 3.9 9.8 19.6 29.4 39.2
Permissible torque of worm (Nm)
9.8 9.8 19.6 49 153.9 292 292 292 735 1372 1764 2450
Required torque of worm at max. load (Nm)
H 0.83 2.5 6.2 16.1 48.7 90.7 149 238.1 400.1 856 1380.5 2040.9
L 0.42 1.1 2.9 7.4 20 45.3 72.3 124 244 453.3 761.3 1278.3
Permissible max. input (rpm), when max. load
H 1800 1500 750 600 400 300 200 200 200 150 100 100
L 1800 1500 1200 600 300 300 290 250 180 120 90 70
Screw torque Nm, when max. load
2.6 8.6 20.1 65.1 201.5 503.6 813.2 1287.7 2531.9 5551.3 8921.8 13878
H: high speed L: low speed
JTM2.5 DRAWING DIMENSIONS
JTM2.5 DRAWING DIMENSIONS
JTM5 DRAWING DIMENSIONS
JTM5 DRAWING DIMENSIONS
JTM10 DRAWING DIMENSIONS
JTM10 DRAWING DIMENSIONS
JTM25 DRAWING DIMENSIONS
JTM25 DRAWING DIMENSIONS
JTM50 DRAWING DIMENSIONS
JTM50 DRAWING DIMENSIONS
JTM100 DRAWING DIMENSIONS
JTM100 DRAWING DIMENSIONS
JTM150 DRAWING DIMENSIONS
JTM150 DRAWING DIMENSIONS
JTM200 DRAWING DIMENSIONS
JTM200 DRAWING DIMENSIONS
JTM300 DRAWING DIMENSIONS
JTM300 DRAWING DIMENSIONS
JTM500 DRAWING DIMENSIONS
JTM500 DRAWING DIMENSIONS
JTM750 DRAWING DIMENSIONS
JTM750 DRAWING DIMENSIONS
JTM1000 DRAWING DIMENSIONS
JTM1000 DRAWING DIMENSIONS