Upload
james2271
View
1.281
Download
5
Embed Size (px)
Citation preview
New alu-
extrusions,
acces sories and
C-rail extrusion
for the KANYA
System
The modular assembly system with infinite possibilities
PVS® Product news
KANYA2
®
RVS®
SN EN ISO 9001: 2008
Internationally registeredtrademarks:
Kanya AG/SA/Ltd.CH-8630 RütiTelefon +41 (0)55 251 58 58Telefax +41 (0)55 251 58 68e-mail [email protected] www.kanya.com
May only be reproduced in whole or in part with the permission of KANYA AG, Switzerland. The right to make technical modifications is reserved.
© by KANYA AG [05/ 2010 – 6000]
Edition 2010
PatentThis catalogue contains products that are subject to international patent rights. Any imitation of such products constitutes a violation of the law and involves compensation for damages.
Product liabilityKANYA’s product liability is subject to Swiss substantive law only. KANYA is not liable for any further claims and in particular denies liability for copied products orown applications of our products by the user.
Indications
Certificate of Approval:
KANYA 3
PVS® Product news
Four sided softline extru -sion 40x40
Page 4
C-rail extrusionand slides
Page 8/9
Clamp sealingstrip base 30/20
Page 12
Four sidedSoftline extru -sion 40x80
Page 4
Threaded platesINOX
Page 13
Slot extrusion16x40
Page 5
Leveling feet
Page 10
Hammer nuts
Page 13
Clamping blockfor the base 30
Page 5
Inserts
Page 10
Magnet-nuts
Page 13
Alu rail extrusion
Page 6
Plastic hingesBase 20
Page 11
PVS®-screw safe
Page 14
Concave rollersand double -trolley with concave rollers
Flat hinge
Page 11
Allen key safe
Page 14
Page 6/7
Ribbed rubberextrusion
Page 12
KANYA4
Extrusion base 40 mm
Four sided softline extru-sion 40x80 type C10–3
ApplicationFor use in the medical, pharmaceutical andfood industries where flat, easy to cleansurfaces are required.Rip-off slots ensure flexibility to connectother elements.
ApplicationFor the same use as the C10–0, but withmore stability by reason of the dimension40x80mm.
Technical data
Ix = 69.79 cm4
Iy = 18.51 cm4
Wx = 17.45 cm3
Wy = 9.26 cm3
Cross section area = 10.35 cm2
Weight = 2.8 kg/m
Order data Order number
Four sided softline extrusion 40x80 Standard length 5000 mm C10–3–00/5000
Four sided softline extrusion 40x80 Cut to length C10–3–02–02/…
Four sided softline extrusion40x40 type C10–0
Technical data
Ix = 9.41 cm4
Iy = 9.30 cm4
Wx, = 4.71 cm3
Wy, = 4.66 cm3
Cross section area = 5.90 cm2
Weight = 1.6 kg/m
Order data Order number
Four sided softline extrusions 40x40 Standard length 5000 mm C10–0–00/5000
Four sided softline extrusions 40x40 Cut to length C10–0–02–02/…
Extra machining see main catalogue
KANYA 5
Slot extrusion 16x40 type C08–1
Order data Order number
Slot extrusion 16x40 Standard length 5000 mm C08–1–00/5000 Cut to length C08–1–02–02/…
Order data Order number
Single clamping blocks base 30 Cross connection B34–01 Parallel connection B34–11 Double clamping block Cross connection B34–02 Parallel connection B34–22
Order data Order number
Clamping extrusions raw extrusion base 30Standard length 3000 mm B34–0–00/3000 Cut ot length B34–0–02–02/…
Clamping blockbase 30
ApplicationTo connect two ex-trusions of base 30in parallel or cros-sing. Two blocksare required tocreate a parallel
Technical data
Ix = 0.99 cm4
Iy = 5.73 cm4
Wx = 1.24 cm3
Wy = 2.87 cm3
Cross section area = 3.59 cm2
Weight = 1.0 kg/m
Specification extrusion: Aluminum, matt, anodized in
natural colorsScrew: Steel zinc coated
Parts supplied1/2 clamping block (s), screw
ApplicationA narrow rail for running roller doors, or fixing to a wall.
Slot extrusion / Clamping block
connection.
KANYA6
Alu guide extrusion type B19–8
Rollers concave
Alu guide extrusion / Roller concave
ApplicationThe Aluminum-guide is made to clip intoslots of base 50/40/30. In addition its pos-sible to press-fit a steel bolt Ø6 to lock theextrusions against moving. Advantages: – Quick and simple assembly for low bud-
get– Closed slots avoid dirt deposits– Expandable at already existing construc-
tions.
Sliding doors are easy and cost effective toproduce. Used in applications, were noopen slots are allowed to avoid dirt depo-sits.
This extrusion is primary used as a rail gui-de for the concave rollers.
ApplicationThis ball bearing-mounted roller is mainlyused in assembly with the trolley extrusion,although it can also be attached directly toany extrusion. Together with the Alu-guide-extrusion type B19–8 a low cost rail is pro-duced.
Specification PA 6 Black2 deep groove ball bearings with cover discs F = 150 N
Order data Order number
Alu guide extrusion Standard length 5000 mm B19–8–00/5000 Cut to length B19–8–02–02/…
Order data Order number
Roller, concave B48–10
KANYA 7
Double trolley concave
Double trolley concave
ApplicationThe double trolley with concave rollers gi-ves you the possibility, to produce slidingdoors together with the alu rail extrusionB19–8. The length of the trolley you can bedefined. We recommend to add an additio-nal roller for lengths over 1000mm.
The double trolley can be ordered with more than 2 rollers.
The roller-mounted support with concaverollers are available on demand (see maincatalogue, roller mounted support).
Parts supplied Alu extrusion with >_ 2 rollers. PVS-connectors and/or end caps assemb-led.
Load: see rollers.
Order data Order number
v = 0 mm v = 2 mmDouble trolley big L= … with end cap concave B37–12–02–02/… B37–13–02–02/… Double trolley big L= … with PVS-connectors concave B37–12–10–10/… B37–13–10–10/…
Trolley withconnectors
Trolley with endcaps
Steel bolt
Steel bolt
KANYA8
C-guide rail
C-guide rail
Dimensions
Size A B C D E F kg/m 20 19.2 10 2 7 7 5 0.4730 29.5 15 2.5 10 8.4 6.4 0.945 46.4 24 4 15.5 11 9 2.3
Application Because of the optimal shape the guide railcan be used for relatively high loads. It canbe fixed directly to the extrusions. Cente-ring bolts adjust the rail to the extrusion. In combination with the slide are precise,cost efficient linear-guides. Three sizes areavailable.
Specification Steel INOX
Zinc coated guide rail on demand.
Order data Order number
Size 20Standard length 4000 mm L20–01–00/4000 Cut to length L20–01–02–02/…
Size 30Standard length 4000 mm L30–01–00/4000 Cut to length L30–01–02–02/…
Size 45Standard length 6080 mm L45–01–00/6080 Cut to length L45–01–02–02/…
min. 2 center bolts/rail
(Hole centres)
KANYA 9
H
Slides
Slides to C-guide rail
Dimensions
Size A B C D E F G H Ø ø x20 75 18 3 6 18.5 19 2.5 16 5.2 4.5 0.530 96 25 4 6 23.5 24.5 3.5 22 6.2 5.5 0.545 155 45 4 8 34 43.5 5 31 8.2 6.6 0.6
Bearing load
Size Frad Fax
20 300N 170N30 800N 400N45 1600N 860N
Application Mainly used for horizontal and vertical guides Especially for drawer or sliding orstroke doors. Great for applications requi-ring movement of higher loads.
Specification Steel INOX
Other dimensions on demand
Technical dataUsed in temperature range of: –20°C to +100° C max. Speed max.: 1.5 m/s
The flat slide gives you the possibility toproduce a low height guide system. It isscrewed directly on the construction extru-sion. Two anti-twist spigots help to positionthe slides parallel to the extrusion.
The two external rollers take the load, whilstthe middle allows you to adjust the inputtension with an eccentric bolt.
Order data Order number
Slides complete incl. rollersSize 20 L20–20Size 30 L30–20Size 45 L45–20
Anti-twist spigots
KANYA10
Leveling feet Threaded inserts
Leveling feet / threaded inserts
Order data Order number
Leveling foot stainless steel M x L D H F M10 x 75 39 38 3000 N B43–21–I
Order data Order number
Leveling foot base 20 M L D H F M6 x 60 19 25 500 N B43–02
Leveling foot base 40 M L D H F M16 x 155 39 40 8000 N B43–16
Order data Order number
M1 M2 S Lzinc coated threaded insert base 50/40 M16 M12 10 25 A33–12
Stainless steel threaded inserts base 50/40M16 M10 10 25 A33–20–IM16 M8 8 25 A33–28–I
base 30M14 M10 10 25 B33–21–I
Specification Cup: PA-GF schwarz Bolt/locknut: Steel, zinc coated Anti-slide pad: NBR
ApplicationThe screwed in threaded insert is primarilyused to take leveling feet and casters or tofix end panels/ base plates in place.
Specification Steel zinc coated/INOX Specification
Cup: INOX Bolt/locknut: INOX Anti-slide pad: NBR
KANYA 11
Plastic hinge – fixedbase 20
Flat hinge aluminium
Hinges
ApplicationSingle hole fixed hinges for base 20 extru-sions. With hole centres of 20mm, there isno clearance between the door and the fra-me.
Specification PA-GF, blackBolt: Steel zinc coated
Fixing kit* Screw and threaded plates
ApplicationThe flat hinges means the hinges plate isnot visible when the door is closed. Thisadds to the security (and complies to EUmachinery directive) as well as aesthetics.It also enables the fitment of the hinges todoors using faced extrusions without re-quiring additional drilling.
Specification Aluminium anodized Bolt: Steel INOX
Order data Order number
base 20 D60–00–PA (–S)*
* Order No. for fixing kit: add to the order number –S
Order data Order number
base A B C E F50 104 50 59 29.5 29.5 A60–28 (–S)* 40 84 50 50 25 25 C60–28 ( –S)* 30 64 50 39 19.5 19.5 B60–28 (–S)* 50/40 94 50 54.5 29.5 25 AC6–28 (–S)* 40/30 74 50 44.5 25 19.5 CB6–28 (–S)* 50/30 84 50 49 29.5 19.5 AB6–28 (–S)*
KANYA12
Ribbed rubber extrusion base 50/40/30/20
Clamping sealingstrip base 30/20
Plastic extrusion
Application The ribbed rubber extrusion can be used asa surface protector, as anti slide, or as asealing extrusion. That extrusion fits in theslots of all cross sections of base 50, 40,30 and 20.
Specification EPDM, blackWeight: 70g/m
Application This sealing strip is used to stabilise and seal panels. It is fitted after the panel is in-serted in the slot and fits base 20 and 30extrusions.
Specification Neopren-caoutchouc black, oil resistant
Order data Order number
ribbed rubber extrusion Complete roll: 50 m D39–86Cut ot length D39–86–02–02/…
Order data Order number
Clamping sealing strip base 30/20standard length rolls of 200 m B39–83 Cut to length B39–83–02–02/…
Dimensions
A B C Panel 4–5mm thick 7.6 6.2 1.9
KANYA 13
Threaded platesINOX
Hammer nuts Magnet nuts
Threaded plates / hammer nuts / magnet-nuts
base 30/20
base 50/40
base 30/20
base 50/40
Application For attaching components. Threaded pla-tes are inserted before assembly into theend of the extrusion slots.
Specification Threaded plates: Stainless steelRetaining spring: Spring steel
Application The hammer nuts can be used for the sa-me purpose as the threaded plates orspring nuts. They can be assembled after-wards into the slot. Because of their 8mmwidth, short fixing distances are possible.Their load-bearing capability is clearly lo-wer than this of threaded plates and extru-sion nuts.
Specification Hammer nut: Steel zinc coated Retaining spring: Spring steel
Application The magnet-nuts can be inserted into theextrusions of the base 50 and 40 on theopen cross section. They can be fixed inposition with 2 small screws. With the magnet-nuts you can do a flat door fixing;cover a frame with powder coated steel panels; or use as a tool holder.
Specification Cage: Plastic Screw: Zinc coated Magnet: Zinc coated Max. temperature: Until 80° C
Order data Order number
Magnet-nutsextrusion base 50 A32–86extrusion base 40 C32–86
Order data Order number
Threaded plates Extrusion base stainless steel 50/40 30/20Thread M M3 – D32–30–IM4 A32–40–I D32–40–IM5 A32–50–I D32–50–IM6 A32–60–I D32–60–IM8 A32–80–I –
Order data Order number
Extrusion base 50/40 30/20 Thread M M3 AC31–35 BD31–35 M4 AC31–45 BD31–45 M5 AC31–55 BD31–55 M6 AC31–65 BD31–65
KANYA14
PVS®-Screw Safe M12x12
Allen key for PVS®-Screw Safe
KANYA Safe
Order data Order number
PVS®-Screw Safe 125–80–S
Order data Order number
KANYA-key to PVS®-Screw Safe E97–2–S
Application Safety Screw for all PVS®-connectors ofthe base 50, 40 and 30 according thePVS®-Main catalogue. Due to the new EUmachinery directives, the PVS-Screw Safeensures the PVS connector can only be un-fastened using special tooling.
Specification Steel zinc coated
Application Special allen key for the PVS®-connectorwith PVS®-Screw Safe M12x12.
Specification Steel zinc coated
KANYA 15
RU
USA
S
RO
PL
NL
J
IL
I
GB
F
ESP
DK
D
D
SK
CZ
BR
B
A VENTOR SICHERHEITSSYSTEME– AUTOMATISIERUNGFalkenau 11A-4690 SchwanenstadtTel: 0043 (0)7673 80511-0Fax: 0043 (0)7673 80511-40e-mail: [email protected]: http://www.ventor.at
MAM S.A.Industrie/AutomationRue de la Station 9– 11B-1435 Mont St. GuibertTel: 0032-10/657 012Fax: 0032-10/658 791e-mail: [email protected]
ABG – INDUSTRIA COMERCIO LTDA.Av. das Araucárias, 509 – BarigüiCEP 83707-000Araucária-Paraná-BrasilTel: 0055-41/643 1384Fax: 0055-41/643 3628e-mail: [email protected]: http://www.kanya.com.br
VISIMPEX a.s.Seifertova 33CZ-750 02 P`́rerovTel: 00420 581 808 134Fax: 00420 581 808 515e-mail: [email protected]: http://www.kanya.cz
Nord PLZ 1,2,3,4,5DRECKSHAGE GMBH & CO. KGWalter-Werning-Straße 7D-33699 BielefeldTel: 0049-521/92 59-0Fax: 0049-521/92 59 289e-mail: [email protected]: http://www.dreckshage.de
Süd PLZ 0,6,7,8,9KANYA DEUTSCHLAND GMBHMeußelsdorferstraße 25D-95615 MarktredwitzTel: 0049-9231/603 860Fax: 0049-9231/603 861e-mail: [email protected]: http://www.kanya-deutsch-land.de
JJ MECHATRONIC ASIndustriparken 17DK-4450 JyderupTel: 0045-59/25 81 00Fax: 0045-59/25 81 01e-mail: [email protected]: http://www.jjas.dk
IBALTEC SISTEMAS, S.L. C/. Josep Soler, 74-76 bjs.E - 08310 ARGENTONA (Barcelona) Tel: 0034-93/756 11 53Fax: 0034-93/797 40 34 e-mail: [email protected]: http://www.ibaltec.com
BERNAY AUTOMATION S.A.B.P. 451-1, Rue de MennevalF-27304 Bernay CedexTel: 0033-232/473 510Fax: 0033-232/430 188e-mail: [email protected]: http://www.bernay-automa-tion.com
THINKING SPACE SYSTEMS Ltd.Unit 2, The QuadrangleAbbey Park Industrial EstateRomseyHampshire SO51 9DL, UKTel: 0044-(0)1794/51 66 33Fax: 0044-(0)1794/51 66 32e-mail: [email protected]: http://www.kanya-uk.co.uk
TECNO-CENTER S.R.L.C.so Lombardia, 41I-10078 Venaria Reale (TO)Tel: 0039-011/455 11 21Fax: 0039-011/455 75 95e-mail: [email protected]: http://www.tecno-center.it
CONLOG LTD.7 Leshem St.P.O. Box 3571IL-Petach-Tikva 49134Tel: 00972-3/926 95 95Fax: 00972-3/923 33 67e-mail: [email protected]: http://www.conlog.co.il
MIWA CO. LTD.No. 632, SEKO 2-chomeMoriyama-kuJ-Nagoya 463 0068Tel: 0081-52/795 60 11Fax: 0081-52/795 33 66e-mail: [email protected]: http://www.miwa-inc.co.jp
TEVEL COMPONENTS BVEndepoelstraat 4NL-6942 GL DidamTel: 0031-(0)316/342 815Fax: 0031-(0)316/343 086e-mail: [email protected]: http://www.tevel.nl
TABAL Sp. J.ul. Energetyków 14PL-20-468 LublinTel: 0048-(0)81/749 09 11Fax: 0048-(0)81/749 01 28e-mail: [email protected]: http://www.tabal.pl
SC Prod Marcos SRLStr Lunga Nr 68555300 Cisnadie/Sibiu, ROMANIATel: 0269 206230/1/2/4/6Fax: 0269 206235e-mail: [email protected]: http://www.kanya.ro
SERVOTECHNICA ZAO22, Vyborgskaya str.125130 Moscow, RussiaTel: 0007 495/797 8866Fax: 0007 495/450 0043e-mail: [email protected]: http://www.servotechnica.ru
EIE MASKIN ABBox 7124 21 BandhagenTel: 0046-8/727 88 00Fax: 0046-8/727 88 99 e-mail: [email protected]: http://www.eie.se
A-LINE CORPORATION1303 Upper Asbury AveCharlotte NC 28206 – USATel: 01-704/332-1059Fax: 01-704/332-4729e-mail: [email protected]: http://www.aline1.com
KANYA-VertretungenOur products – your KANYA-representative
PVS®
The extrusion connecting system that delivers custom-made structural solutions.
RVS®
The tube connectingsystem for adjustableapplications.
Head quarterKANYA AG/SA/Ltd. | Neuhofstrasse 9 | CH-8630 Rüti | SchweizTel.: +41 (0)55 251 58 58 | Fax: +41 (0)55 251 58 68 | [email protected] | www.kanya.com
Connecting Solutions
Highest flexibiliy Owing to our multi-functional extrusionsPVS and fitting RVS system. Nearly no bor-ders are set to the application possibilities.
Innovative system approachesbased on our 35 year old experience – withinnumerably produced applications and ex-pert customer advisory service.
Short delvery timeOwning our considerably stock of extrusi-ons, tubes and accessories we can provi-de you with short delivery times.
Best service- und quality – standards based on optimized processes, self deve-loped IT-Systems and well educated co-workers.
Our skills – Your profit
May only be reproduced in whole or in part with the permission of KANYA AG, Switzerland. The right to make modifications is reserved.Copyright by KANYA AG, Switzerland
ISO 9001:2008
Kanya AG/SA/Ltd.Neuhofstrasse 9CH-8630 RütiSchweiz
Telefon +41 (0)55 251 58 58Telefax +41 (0)55 251 58 68
e-mail [email protected] www.kanya.com