Kewaunee Nuclear Power Plant Point Beach Nuclear Plant NM C · Kewaunee Nuclear Power Plant Point Beach Nuclear Plant N490 Highway 42 6610 Nuclear Road Kewaunee, Wl 54216-9511 Two

Kewaunee Nuclear Power Plant Point Beach Nuclear Plant N490 Highway 42 6610 Nuclear Road

Kewaunee, Wl 54216-9511 Two Rivers, Wl 54241

NM C 920.388.2560 920.755.2321

Committed to Nuclear Excellence Kewaunee / Point Beach Nuclear Operated by Nuclear Management Company, LLC

NRC-02-015

February 22, 2002 10CFR50.55a

U.S. Nuclear Regulatory Commission Attention: Document Control Desk Washington, D.C. 20555

Ladies and Gentlemen:

Docket 50-305 Operating License Kewaunee Nuclear Power Plant 2001 Inservice Inspection (ISI) Summary Report

As required by ASME Boiler and Pressure Vessel Code, Section XI; Code of Federal Regulation 1OCFR50.55a; and Wisconsin Administrative Code, Subchapter V ILHR 41.55(3) and ILHR 41.56; various ISI examinations were performed as part of the 2001 Refueling Outage. The outage took place from September 24, 2001 through December 4, 2001; i.e. closing of G1. This letter transmits the Inservice Inspection Summary Report as required by paragraph IWA-6230 of Section XI.

Two separate ASME Section XI inservice examination programs are implemented at the KNPP. One program is for pressure retaining piping/vessel and component supports and the other program for the metal containment. The 2001 refueling outage constituted the first inspection year of the third period of the third interval for the piping/vessel and component support program, including preservice examinations associated with steam generator replacement. The 2001 refueling outage was also the first inspection year of the second period of the first interval for the metal containment program. Examinations for the piping/vessel and component support program, including preservice examinations associated with steam generator replacement, were performed in accordance with the ASME Boiler and Pressure Vessel Code Section XI 1989 Edition. Examinations for the metal containment program were performed in accordance with the 1992 Edition up to and including the 1992 Addenda of Section XI of the ASME Boiler and Pressure Vessel Code. These requirements were implemented in accordance with the "Kewaunee Nuclear Power Plant Third Ten-Year Inservice Inspection (ISI) Program 1994-2004," "Kewaunee Nuclear Power Plant First 10-Year Inservice Inspection Class MC (ISI) Program 1996-2006," Plant Technical Specifications, and nondestructive examination procedures.

Docket 50-305 NRC-02-015 February 22, 2002 Page 2

The following items were examined for Class 1, Class 2, Class 3 Components and their supports:

1. Reactor Vessel Closure Head Flange Weld 2. Reactor Vessel Closure Head Studs, Nuts, Washers and Control Rod Drive Mechanisms 3. Pressurizer Circumferential and Longitudinal Welds 4. Steam Generator Head Circumferential Weld, Nozzle Inside Radius Sections and Nozzle To

Shell Weld 5. Reactor Coolant Pump Main Flange Bolting and No. 1 Seal Housing Bolting 6. Seal Water Injection Filter Shell Circumferential Weld 7. Letdown Heat Exchanger Head Circumferential Weld 8. Charging Pump Pulsation Dampener Head Circumferential Weld 9. Class 1 Valve Bodies

10. Class 1 and Class 2 Piping Welds 11. Class 1 Piping Integrally Welded Attachment 12. Class 2 Piping Integrally Welded Attachments 13. Class 2 Safety Injection Pump Casing Weld and Welded Attachments 14. Class 1, Class 2 and Class 3 Piping and Component Supports and Hangers 15. Class 1 and Class 2 Reactor Vessel Conoseal Bolting, Pressurizer Manway Bolting, Flange

Bolting and Valve Bonnet Bolting 16. Class 1 System Leakage Test 17. Class 2 and Class 3 System Inservice and Functional System Pressure Tests

The following items were examined for the Replacement Steam Generators:

1. Replacement Steam Generators: Tubesheet to Head Welds, Nozzle Inside Radius Sections, Nozzle to Safe End Butt Welds, Primary Side Manway Bolting, Integrally Welded Attachments, Shell Circumferential Welds, Tubesheet to Shell Welds and Class 1 Support Components

2. New Class 1 Reactor Coolant Piping Welds 3. New and Replacement Class 2 Main Steam and Feedwater Piping Welds 4. Reexamination of Existing Steam Generator, Circumferential Welds SG-W2 and SG-W10 to

verify previously recorded Ultrasonic Planar Indications 5. Existing 16", 8" and 1" Feedwater Inside Diameter Surfaces 6. Existing Steam Generator Inside Diameter Feedwater Nozzle Inner Radius and Shell

Circumferential Welds 7. Existing Steam Generator Class 2 Supports


The following items were examined for the Class MC Reactor Building Containment Vessel:

1. Accessible Surface Areas 2. Longitudinal Welds and Circumferential Welds 3. Sleeve to Bellows Welds 4. Flange Welds 5. Seals and Gaskets 6. Moisture Barriers 7. Dissimilar Metal Welds 8. Bolted Connections 9. Containment Penetration Bellows

10. Airlocks

The following items were examined in accordance with Kewaunee Nuclear Power Plant Technical Specifications:

1. Eddy Current Testing of Replacement Steam Generators 2. Functional Testing, Disassembly and Overhaul of Steam Generator 900 KIP Hydraulic

Snubbers

In addition, the following examinations were performed in excess of ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Requirements and included:

1. Portions of the Service Water System were radiographed for wall loss, pits, nodules, and sand, mud or other sediments.

2. Balance of plant piping subject to erosion/corrosion was examined by radiographic, ultransonic, and visual techniques.


Please find attached a copy of the following documentation that summarizes the inservice inspection activities and results for the Kewaunee Nuclear Power Plant 2001 Refueling Outage.

1. Summary of recordable indications and a description of how they were dispositioned (Attachment 1)

2. Summary of Class 1 and 2 Repairs and Replacements of Components 1 inch in diameter or smaller (Attachment 2)

3. Form NIS-1 Owner's Report for Inservice Inspections of Class 1, Class 2, and Class 3 Components (Attachment 3)

4. Form NIS-I Owner's Report for Inservice Inspections for Class MC Components (Attachment 4) 5. Form NIS-I Owner's Report for Inservice Inspections of Replacement Steam Generators

(Attachment 5) 6. Form NIS-2 Owner's Report for Repair or Replacements (74 Total) (Attachment 6) 7. Examination Summary for Scheduled and Augmented Inservice Inspection (ISI) Program

(Attachment 7) 8. Examination Summary for Inservice Inspection (ISI) Class MC Program (Attachment 8) 9. Examination Summary for Preservice Inspection (PSI) of Steam Generators (Attachment 9)

10. Examination Summary for Replacement Steam Generator Eddy Current (Attachment 10) 11. Examination Summary for Steam Generator 900 KIP Hydraulic Snubbers (Attachment 11) 12. A summary of examinations which were limited by geometric, metallurgical, or design/access

restrictions and their associated data sheets (Attachment 12)

The final reports for each of these examinations are on file in the QA/QC Records Vault at the Kewaunee Nuclear Power Plant. These records are available for review as deemed necessary.

Additional Comments

The next Refueling Outage at the Kewaunee Nuclear Power Plant is tentatively scheduled for April 4, 2003 through April 30, 2003.

Sincerely,

Thomas Coutu

Manager-Kewaunee Plant

PEB/CAT

Attach. cc - U.S. NRC - Region III (w/o attach)

U.S. NRC - Senior Resident Inspector (w/o attach)

ATTACHMENT 1

Letter from T. Coutu (NMC)

To

Document Control Desk (NRC)

Dated

February 22, 2002

Summary of Recordable Indications and Description of Disposition

Docket 50-305 NRC-02-015 February 22, 2002 Attachment 1, Page 1

TABLE 1

TYPE OR LOCATION OF RECORDABLE i O INDICATION (RI) METHOD NO. OF RI'S

Reactor Vessel Closure Head Flange Weld Surface (MT) 1 Weld Steam Generator Circumferential Head Weld Volumetric (UT) 1 Weld Seal Water Injection Filter Shell Weld Volumetric (UT) 1 Weld Piping Integrally Welded Attachment Surface (PT) 1 Weld Piping Circumferential Butt Weld Surface (PT) 1 Weld Piping Socket Weld Surface (PT) 1 Weld Reactor Vessel Conoseal Bolting Visual (VT-3) 1 Conoseal RC Pump No. 1 Seal Housing Bolting Visual (VT-1) 1 Pump Pressurizer Manway Bolting Visual (VT-3) 1 Manway Component Supports and Hangers Visual (VT-3) 31 Supports Valve Bonnet Bolting Visual (VT-1) 1 Valve Valve Bonnet Bolting Visual (VT-3) 6 Valves System Pressure Tests Visual (VT-2) 51 Items Replacement Steam Generator Integrally Welded Surface (MT) 1 Weld Attachment SG-1B-23B Replacement Steam Generator Tubesheet To Head Weld Volumetric (UT) 1 Weld SG-W32 Replacement Steam Generator Primary Side Manway SG- Visual (VT-i) 1 Stud 1B-CLMWB Replacement Steam Generator Tubesheet To Shell Weld Volumetric (UT) I Weld SG-W31 Existing Steam Generator Feedwater Nozzle Inner Radius Surface (MT) 1 Nozzle SG-IR8 Existing Steam Generator Feedwater Nozzle Inner Radius Surface (MT) & 1 Nozzle SG-IR16 Visual (VT-1) Existing Steam Generator Circumferential Welds SG-W2 Volumetric (UT) 2 Welds and SG-W10 Existing 16", 8" and 1" Feedwater Piping FW-W27BC Surface (MT) 1 ID Section Existing 16", 8", and 1" Feedwater Piping FW-W55BC Surface (MT) & 1 ID Section

Visual (VT-1) Reactor Building Containment Vessel General Visual 11 Plates Reactor Building Containment Vessel Moisture Barriers VT-3 5 Plates Reactor Building Containment Vessel Emergency Airlock VT-1 1 Bolt


Disposition of Class 1, Class 2, and Class 3 indications have been completed in accordance with the rules of ASME Boiler and Pressure Vessel Code Section XI 1989 Edition and ASME Boiler and Pressure Vessel Code Section XI 1992 Edition up to and including 1992 Addenda for Class MC Components. Applicable codes, standards, and engineering criteria were used to disposition indications associated with the non-code-required examinations. Recordable indications for Class 1, Class 2, Class 3 and Class MC have been dispositioned as summarized below:

1. A 0.125" long linear indication was recorded on the Reactor Vessel Closure Head Flange Weld RV-W12 during performance of magnetic particle examination. This linear indication was acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWB-3510-3.

2. A spot indication on Steam Generator 1B Circumferential Head Weld SG-W9 was recorded during performance of ultrasonic examination. This ultrasonic spot indication was acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWC-3510-1.

3. Five (5)laminar indications combined into four (4) laminar indications due to proximity of the indications. The indications are on seal water injection filter IA circumferential shell weld AFSI-Wl and were identified during performance of ultrasonic examinations. These laminar indications were acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWC-3510-2 and were typical of laminations recorded on seal water injection filters 1A and 1B during Refueling Outages 1982, 1986, 1988, 1992 and 1998.

4. Three (3) rounded indications (0.625", 0.125" and 0.1875" in diameter) were recorded on 2" piping integrally welded attachment RSI-H72 during performance of liquid penetrant examinations. These three (3) rounded indications were acceptable per ASME Boiler and Pressure Vessel Code Section III 1989 Edition Section NC-5352(b).

5. A 0.125" long linear indication and a 0.125" rounded indication were recorded on 6" diameter Circumferential Butt Weld ICS-W43 during performance of liquid penetrant examinations. The 0.125" long linear indication was acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWB-3514-2. The 0.125" rounded indication was acceptable per ASME Boiler and Pressure Vessel Code Section III 1989 Edition Section NC-5352.

6. A 0.55" long linear indication on 2" diameter socket weld SI-W6S was recorded during performance of liquid penetrant examinations. This linear indication was unacceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWB-3514-2. The linear indication was removed under Work Order 01-016342 by light filing with a jewelers file, reexamined and accepted with no indications.


7. Visual (VT-1, VT-2 and VT-3) indications were recorded on reactor vessel conoseal bolting, reactor coolant Pump No. 1 seal housing bolting, pressurizer manway bolting, valve bonnet bolting, piping supports and hangers and during system pressure tests. The indications were either (1) evaluated and accepted or (2) repaired, reexamined and accepted by: Nuclear Management Company, LLC - Maintenance, Quality Control, Engineering and Technical Support or Inservice Inspection Personnel and reviewed by the Authorized Nuclear Inservice Inspector.

8. Two (2) separate linear indications on replacement steam generator 1B integrally welded attachment SG-1B-23B were recorded during performance of magnetic particle examinations. These two linear indications due to their close proximity to each other were classified as one linear indication with a length of 0.21875." This linear indication was acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Sections IWB-3516.1, IWB-3510.3 and IWB-3510-3.

9. Ultrasonic recordable indications at three separate locations on replacement steam generator lB tubesheet to head weld SG-W32 were noted during performance of manual ultrasonic examinations. These three separate planar indications were acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWB-3510-1.

10. One visual indication was recorded by the VT-1 method on replacement steam generator 1B primary side manway stud SG-1B-CLMWB#17. Although this primary manway stud was acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Section IWB-3517.1 (b), a new VT-1 acceptable replacement stud was installed.

11. Ultrasonic recordable indication at one location on replacement steam generator 11B tubesheet to shell weld SG-W31 was noted during performance of manual ultrasonic examination. This planar indication was acceptable per ASME Boiler and Pressure Vessel Code Section XI 1989 Edition Table IWC-3510-1.

12. Recordable indications on the existing steam generator lB feedwater nozzle inside radius section SG-IR8 were recorded during augmented examination by magnetic particle. These indications were repaired by Bechtel Corporation under Bechtel's NCR's and Kewaunee Nuclear Power Plant Work Orders as part of replacement steam generator activities.

13. Recordable indications on the existing steam generator 1A feedwater nozzle inside radius section SG-IR16 were recorded during augmented examinations by magnetic particle and visual (VT-1) methods. These indications were repaired by Bechtel Corporation under Bechtel's NCR's and Kewaunee Nuclear Power Plant Work Orders as part of replacement steam generator activities.


14/15. Prior to severing the existing steam generators and following welding the replacement steam generators to the existing steam generators a manual ultrasonic examination was performed on the existing circumferential shell welds SG-W2 and SG-W10 to ensure that there was no growth in the previously recorded planar indications. These indications were recorded in 1991 for SGW2 and in 1991 and 1996 for SG-Wl0. All indications previously recorded as well as new indications recorded due to amplitude recording criteria change were acceptable either by ASME Boiler and Pressure Vessel Code Section XI 1989 acceptance standards or by fracture analysis as provided in Westinghouse Electric Corporation WCAP 11476 Rev.3 Handbook on Flaw Evaluation, Kewaunee Unit 1 Steam Generator Upper Shell to Cone Weld, May 1991, and evaluation by Kewaunee Nuclear Power Plant during 1996 and 2001 Refueling Outages.

16. Recordable indications on Loop A existing 16", 8" and 1" feedwater piping inner diameter surface for FW-W27BC were recorded during augmented magnetic particle examinations. These indications were repaired by Bechtel Corporation under Kewaunee Nuclear Power Plant Work Orders generated during steam generator replacement activities.

17. Recordable indications on Loop B existing 16", 8" and 1" feedwater piping inner diameter Surface for FW-W55BC were recorded during augmented examinations by magnetic particle and visual (VT-1) methods. These indications were repaired by Bechtel Corporation under Kewaunee Nuclear Power Plant Work Orders generated during steam generator replacement activities.

18. General visual indication consisting of a 4" x 8" surface defect was recorded on Plate 155. This surface defect was previously recorded and accepted in 1998 and showed no change in dimension or surface condition during the 2001 Refueling Outage.

19. General visual indication consisting of a slight inward bulge on Plates 74, 75, and 83 was recorded. The slight inward bulge was evaluated by Engineering and accepted under Kewaunee Nulcear Power Plant Specification TS-1052, Addendum No. 4, Item No. 19 Section 10.3 - Shell Tolerance.

20. General visual indication consisting of slight outward bulges on Plates 144, 145, 146, 147 and 148 were recorded. The slight outward bulges were evaluated and accepted by Engineering Analysis.

21. General visual indications consisting of weld deposits on Plate 62 and arc strikes on Plate 99 were recorded and are acceptable per ASME Boiler and Pressure Vessel Code Section XI 1992 Edition 1992 Addenda.

22. VT-3 indications consisting of lack of bonding and tears were recorded in the moisture barriers on Plates 62, 64, 65, 66 and 67 and were repaired under Work Order 0 1-018045.

23. A VT-I indication on an emergency airlock bolt was recorded and was repaired under Work Order 01-018283.

ATTACHMENT 2


To


Dated

February 22, 2002

Summary of Class 1 and 2 Repairs and Replacement of Components 1 inch in Diameter or Smaller


The following summarizes the repairs and replacements performed following the 2000 Refueling Outage and during the 2001 Refueling Outage by grinding, buffing, filing, cutting or welding on the Class 1 and Class 2 pressure boundary. These repairs and replacements are in addition to those itemized on the attached Forms "NIS-2 Owner's Report for Repairs or Replacements."

Component Class Reference Repair/Replacement Method 3/4" Valve PS-2A 1 XK-100-10 Cutting and Welding of Replacement

Valve 3/4" Valve PS-30 1 XK-100-10 Cutting and Welding of Replacement

Valve 1" Valve RC-45A 1 XK-100-10 Cutting and Welding of Replacement

Valve and Piping 1" Valve RC-45B 1 XK-100-10 Cutting and Welding of Replacement

Valve and Piping Replacement Steam 1 XK-100-10 Repair by Welding Fillet Weld Generator 1B 1/2" Internal Nozzle Drain Line 3/4" Valve 1 XK-100-35 Cutting and Welding of Replacement CVC-21070-1 Valve Replacement Steam 2 M-203 Buffing and Grinding involving Metal Generators 1A and Removal for Arc Strikes, Gouges and 1B: 2", 1" and 3/4" Weld Spatter Piping Replacement Steam 2 M-205 Machining involving Metal Removal for Generators 1A and Pitting 1B Secondary Side Hand Holes

ATTACHMENT 3


To


Dated

February 22, 2002

FORM NIS- 1 Owner's Report for Inservice Inspections of Class 1, Class 2, Class 3 Components

Page 1 of 9

FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS AS REQUIRED BY THE PROVISIONS OF THE ASME CODE RULES

1. OWNER - WISCONSIN PUBLIC SERVICE CORPORATION, 700 NORTH ADAMS,

P.O. BOX 19001, GREEN BAY, WISCONSIN 54307- 9001

2. PLANT - KEWAUNEE, N490 HIGHWAY 42, KEWAUNEE, WISCONSIN 54216-9511

3. PLANT UNIT - NO. 1

4. OWNER CERTIFICATE OF AUTHORIZATION - N/A

5. COMMERCIAL SERVICE DATE - JUNE 16,1974

6. NATIONAL BOARD NUMBER FOR UNIT - N/A

7. COMPONENTS INSPECTED -

COMPONENT OR APPURTENANCE

Reactor Vessel RV

Pressurizer PZR

Steam Generator SG1A

Steam Generator SGlB

Excess Letdown Heat Exchanger AHEL-1A

Excess Letdown Heat Exchanger AHEL-1B

Class 1 Piping

Reactor Coolant Pump RCP-1A

Reactor Coolant Pump RCP-1B

Residual Heat Exchanger AHRSI-IA

MANUFACTURER OR INSTALLER

Combustion Engineering

Westinghouse

Westinghouse/ Ansaldo Energia Milano

Westinghouse/ Ansaldo Energia Milano

Sentry

Sentry

Texas Pipe Bending

Westinghouse

Westinghouse

Joseph Oat and Sons


SERIAL NO.

CE69202

1151

1141/0202

1142/0201

3996-5E

3996-6E

STATE OR PROVINCE NO.

U11480

U11402

U11400

U11401

U11407

U11408

NATIONAL BOARD NO.

21010

68-23

68-28/151

68-29/150

364

365

1A-1-618J871GO1

1B-2-618J871G02

1817-1E U11046 344

Page 2 of 9







5. COMMERCIAL SERVICE DATE - JUNE 16, 1974




Residual Heat Exchanger AHRS2-1B

Charging Pump Pulsation Dampener APD-1A

Charging Pump Pulsation Dampener APD-1B

Charging Pump Pulsation Dampener APD-1C

Seal Water Heat Exchanger AHSW

Volume Control Tank VCT

Regenerative Heat Exchanger ARG

Letdown Heat Exchanger AHLD


Joseph Oat and Sons

Greer Hydraulics

Greer Hydraulics

Greer Hydraulics

Atlas

Joseph Oat and Sons

Joseph Oat and Sons

Atlas


SERIAL NO.

1817-1F


U11424

NATIONAL BOARD NO.

345

GNI-1848

GNI-1846

GNI-1847

734

1787-1C

1831-13

1206

U11404

U11425

U11409 U11410 U11411

U11405

596

376

413 414 415

1031

Page 3 of 9


1. OWNER - WISCONSIN PUBLIC SERVICE CORPORATION, 700 NORTH ADAMS, P.O. BOX 19001, GREEN BAY, WISCONSIN 54307- 9001








Seal Water Injection Filter AFSI-1A

Seal Water Injection Filter AFSI-1B

Reactor Coolant Filter AFRC

Seal Water Filter AFSW

Class 2 Piping

Charging Pump APCH-1A

Charging Pump APCH-1B

Charging Pump APCH-1C

Charging Pump APCH-1A Suction Stabilizer


Commercial Filters

Commercial Filters

AMF Cuno

AMF Cuno

Texas Pipe Bending

Ajax Iron Works

Ajax Iron Works

Ajax Iron Works

Greer Hydraulics


SERIAL NO.STATE OR

PROVINCE NO.

101072

101073

121

123

NATIONAL BOARD NO.

1172

1173

2616

2618

6578

6576

6577

GH1-10234 568

Page 4 of 9











Charging Pump APCH-1B Suction Stablizer

Charging Pump APCH-1C Suction Stablizer

Residual Heat Removal Pump APRHI-IA

Residual Heat Removal Pump APRH2-1B

Refueling Water Storage Tank

Diesel Generator AHDG-1A Cooling Water Exchangers (2)

Diesel Generator AHDG-1B Cooling Water Exchangers (2)


Greer Hydraulics

Greer Hydraulics

Byron Jackson

Byron Jackson

General American Transportation Company

ITT Standard Corp.

ITT Standard Corp.


SERIAL NO.STATE OR

PROVINCE NO.NATIONAL BOARD NO.

569GH1-10235

GH1-10236

681N0277

681N0276

C-8297/1969

750797-01-2 &

750797-01-3

750797-01-1 &

750797-01-4

570

Page 5 of 9











Auxiliary Feedwater Pump APFM-1A Motor Driven

Auxiliary Feedwater Pump APFM-1B Motor Driven

Auxiliary Feedwater Pump APFT Turbine Driven

Class 3 Piping

Containment Fan Cooler AHCF-1A

Containment Fan Cooler AHCF-1B


Pacific Pump

Pacific Pump

Pacific Pump

Texas Pipe Bending

Joy Manufacturing and American Air Filter



SERIAL NO.STATE OR


46573

46574

46575

GF14402

GF14399

Page 6 of 9











Containment Fan Cooler AHCF-1C

Containment Fan Cooler AHCF-1D

Safety Injection Pump APSI-1A

Safety Injection Pump APSI-1B

Safety Injection Pump Lube Oil Cooler AHSC-1A

Safety Injection Pump Lube Oil Cooler AHSC-1B

Safety Injection Pump Heat Exchangers (2) AHSC-1A




Bingham Pump

Bingham Pump

Thermxchanger

Thermxchanger

Borg Warner


SERIAL NO.STATE OR


GF14401

GF14400

290696

290697

X10199A2

X10199A3

854030:854030

Page 7 of 9


1. OWNER - WISCONSIN PUBLIC SERVICE CORPORATION, 700 NORTH ADAMS, P.O. BOX 19001, GREEN BAY, WISCONSIN 54307- 9001








Safety Injection Pump Heat Exchangers (2) AHSC-1B

Residual Heat Removal Pump AHRLRP-1A Shaft Seal Heat Exchanger

Residual Heat Removal Pump AHRHRP-1B Shaft Seal Heat Exchanger

Accumulator Tank ACC-1A

Accumulator Tank ACC-1B

Containment Spray Pump APCS-1A

Containment Spray Pump APCS-1B

Containment Spray Pump AIPCS-1A Gland Seal Cooler


Borg Warner

Borg Warner

Borg Warner

Wyatt

Wyatt

Ingersoll Rand

Ingersoll Rand

Helliflow


SERIAL NO.

854030:854030

681N0276

681N0276

H-5645-69

H-5644-69

0670-74

0670-75

49486938


NATIONAL BOARD NO.

U11397

U11398

Page 8 of 9











Containment Spray Pump APCS-1B Gland Seal Cooler

Component Cooling Pump APCC-1A

Component Cooling Pump APCC-1B

Service Water Pump APSW-1A1

Service Water Pump APSW-1A2

Service Water Pump APSW-1B1

Service Water Pump APSW-1B2

Spent Fuel Pool Heat Exchanger AHSF

Main Steam Moisture Separator

Spent Fuel Pool Pump APSF-1A


Helliflow

Ingersoll Dresser Pump Flow Serv.

Ingersoll Dresser Pump Flow Serv.

Worthington Pump

Worthington Pump

Worthington Pump

Worthington Pump

Struther Wells

Wright Austin

Gould Pumps


SERIAL NO.

6080694

0600009

0600010

VTP27737

75 TU-1719-1

VTP27736

VTP27739

1-68-06-1519

6230

STATE OR NATIONAL PROVINCE NO. BOARD NO.

U11445

X.R. 6008

786A519.1

Page 9 of 9











Spent Fuel Pool Pump APSF-1B

Service Water Pump Strainer ASSW-1A1

Service Water Pump Strainer ASSW-1A2

Service Water Pump Strainer ASSW-1B1

Service Water Pump Strainer ASSW-1B2

Component Cooling Heat Exchanger AHCC1-IA

Component Cooling Heat Exchanger AHCC2-1B


Gould Pumps

S.P. Kinney Engineers




Engineers and Fabricators

Engineers and Fabricators


SERIAL NO.

786A519.2

2278

2279

2280

2281

S-15748-A

S-15748-B


U11426

U11427

NATIONAL BOARD NO.

1139

1140

FORM NIS-1 (Back)

8. Examination Dates March 27,2001 to December 6, 2001

9. Inspection Period Identification 3rd

10. Inspection Interval Identification 3rd

1989 None 11. Applicable Edition of Section XI 1989 Addenda

12. Date/Revision of Inspection Plan November 27,2000/Revision 2

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required for the Inspection Plan. Reference Tab C

14. Abstract of Results of Examinations and Tests. Reference Tab B and Tab F

15. Abstract of Corrective Measures. Reference Tab B and Tab F

Utilization of ASME Boiler and Pressure Vessel Code Section XI: Code Cases N-416-1, N-416-2, N-460, N-491, N-498 and N-498-1.

We certify that a) the statements made in this report are correct, b) the examinations and tests meet the Inspection Plan

as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASMIE Code, Section X.

Certificate of Authorization No. (if applicable) '",/-' Expiration Date

Date .- K o Signed W Z -4A1e.. , cua-'u J 20 Owner

By~- A

CERTIFICATE OF INSERVICE INSPECTION

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and

the State or Province of W1 I.OwNSiA and employed by NAxt-r-Fato SrmA, Lci', -r" of 4AA'rgoi•o C.-. have inspected the components described in this Owner's Report during the period

AfAR•,.4 ,'-7, ,avo/ to -e, , , and state that to the best of my knowledge and belief, the

Owner has performed examinations and tests and taken corrective measures described in this Owner's Report in accordance

with the Inspection Plan and as required by the ASME Code, Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning

the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor

his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or

connected with this inspection.

4 ,-__ Commissions A"'72 / eo190s/ 11( -4 -•'T / s

6Signature National Board, State. Province, and Endorsements

Date A3 A

ATTACHMENT 4


To


Dated

February 22, 2002

FORM NIS- 1 Owner's Report for Inservice Inspections for Class MC Compenents











Reactor Building Containment Vessel

Personnel Airlock


Chicago Bridge and Iron Company

Chicago Bridge and Iron Company


SERIAL NO.

C4454

C4454

STATE OR NATIONAL PROVINCE NO. BOARD NO.

U11423

U11423

FORM NIS-1 (Back)

8, Examination Dates September 18, 2001 to December 4, 2001

9. Inspection Period Identification

10. Inspection Interval Identification

2nd

1st

1992 1992 11. Applicable Edition of Section XI ______________Addenda _____________

12. Date/Revision of Inspection Plan September 26, 2000/Revision 1

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required

for the Inspection Plan. Reference Tab C




as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section

)a.

Certificate of Authorization No. (if applicable)

Date A a Q3 Signed J 2,1,WI

Expiration Date

p 5 6-j~c_ e-cOwner

By

National Board. State, Province. and Endorsements



the State or Province of __ _ ___ ___ ___and employed by //A r10F*e ) ,7-6AbM13 It- r f

/4CAR7"FI C r have inspected the components described in this Owner's Report during the period Rdi001 t /e IOV, 200 ' , and state that to the best of my knowledge and belief, the




the examinations, tests, and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor


con:a with t inspecion.

Commissions ,,.'4 " '/A./S / 2" , 'V, '4

ATTACHMENT 5


To


Dated

February 22, 2002

FORM NIS-1 Owner's Report for Inservice Inspections of Replacement Steam Generators

Page 1 of 2












Steam Generator SG1B


Steam Generator SGlB

Steam Generator IA Safe End Welds

Steam Generator 1B Safe End Welds

Class 1 Reactor Coolant Piping Installation Welds

Class 2 Main Steam Piping Installation Welds


Ansaldo Energia Milano


Westinghouse

Westinghouse



Bechtel Corporation

Bechtel Corporation


SERIAL NO.

0202

0201

1141

1142

NA

NA

NA

NA


U11400

U11401

U11400

U11401

NA

NA

NA

NA

NATIONAL BOARD NO.

151

150

68-28

68-29

NA

NA

NA

NA

Page 2 of 2











Class 2 Feedwater Piping Installation Welds

Class 2 Feedwater Nozzle Adapter and Nozzle to Pipe Installation Welds


Bechtel Corporation

Bechtel Corporation


SERIAL NO.

NA

NA


NA

NA

NATIONAL BOARD NO.

NA

NA

FORM NIS-1 (Back)

8. Examination Dates June 4, 2001 December 4, 2001

9. Inspection Period Identification 3rd

10. Inspection Interval Identification 3rd

1989 None

11. Applicable Edition of Section XI 1989 Addenda

12. Date/Revision of Inspection Plan November 27, 2000/Revision 2

13. Abstract of Examinations and Tests. Include a list of examinations and tests and a statement concerning status of work required

for the Inspection Plan. Reference Tab C



Utilization of ASME Boiler and Pressure Vessel Code Section XI: Code Cases

N-416-2 and N-460.


as required by the ASME Code, Section XI, and c) corrective measures taken conform to the rules of the ASME Code, Section

XI.

Certificate of Authorization No. (if applicable) Expiration Date /

Date a\.JA4 CC, A.VQ3~ *QO Signed C-)J I I'~ L~. By J Owner



the State or Province of 0A:i.o C-0 "T I,.- and employed by HA./,-rgao ST4Mi Boller CTr. of

4-e1-/o,'e-) r r" have inspected the components described in this Owner's Report during the period

,&,Tte, ,, ,0 O/ to A '9 "/, and state that to the best of my knowledge and belief, the




the examinations, tests, and corrective measures described in this Owner's Report. Furthermore. neither the Inspector nor


cone wit this inspection.

Commissions / 7 9" V/ Al/.S /OO"at XZ !ý 4., A J

c, .Actor's Signature National Board. State. Province. and Endorsements

V

ATTACHMENT 6


To


Dated

February 22, 2002

FORM NIS-2 Owner's Report for Repair or Replacement (74 Total)

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT As Required by the Provisions of the ASME Code Section Xl

1. Owner Wisconsin Public Service Corporation

700 North Adams P.O.Box 19001 Green Bay, WI 54307-9001

2. Plant Kewaunee Nuclear Power Plant

N490 HWY 42 Kewaunee, WI 54216-9511

3. Work Performed By Nuclear Management Company, LLC

700 First Street, Hudson. Wisconsin 54016

4. Identification of System 33 Class 2 SAFETY INJECTION

5. (a) Applicable Construction Code B31.1-1967

(b) Applicable Edition of Section X1 Utilized for Repairs or Replacements 1989

6. Identification of Components Repaired or Replaced and Replacement Components

Name of

Manufacturer

ITT GRINNELL VALVE COMPANY

Manufacturer Serial No.

NA

National Board No.

NA

Other ID

NA

Date 11/1/2001

Sheet 1 of 2

Unit No. 1

Work Order 01-016956

Type Code Sym. Stamp N..A

Authorization No. NA

Expiration Date NA

Code Case NA

Year Built

1967

Repaired, ASMERepaired,

Replaced, or Replacement

REPAIRED

7. Description of Work REPAIR CLASS 2 SAFETY INJECTION SYSTEM 2" HANGER RSI-H70 DUE TO MISSING JAM NUT.

8. Tests conducted Hydrostatic

Other DJD Pneumatic

Pressure

F Nominal Operating Pressure

psi Test Temp.

9. Remarks NOT APPLICABLE.

Applicable Manufacturer's Data Reports to be Attached

Name of

Component

RSI-H70

ASME Code

Stamped

N

D: deg. F

Exempt 17

N

NIS-2 (Back)

Sheet 2 of 2

Date: 11/1/2001

Name of Component: RSI-H70

Work Order Number: 01-016956

.20 _____

Certificate of Compliance

We Certify that the statements made in the report are correct and this REPAIRED conforms to the rules of the

ASME Code Section XL. Repair or Replacement

Type Code Symbol Stamp NA

Certificate of Authorization No. NA Expiration Date NA

Signed & Date 20 0A

Owner or Owner's Designee, Title

Certificate of INSERVICE INSPECTION

I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors

and the State or Province of Wisconsin and employed by Hartford Steam Boiler Inspection and Ins. Co. of Hartford, CT

have inspected the components described in the Owner's Report during the period 7-;5'i0" to /-3/1 , and state that

to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described

in this Owners Report in accordance with the requirements of the ASME Code, Section XI.


the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor

his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising

from or connected with this inspection.

• • • Commissions NB7741, I, N, IS, A WIS 100024

National Board, State, Province, and Endorsementspectors nature

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT

As Required by the Provisions of the ASME Code Section XI






700 First Street, Hudson, Wisconsin 54016



(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1989


Name of

Component

RSI-H73

Name of Manufacturer



NA

National Board No.

NA NA 1967 XtzHAIh(tU '4

Other ID

Date 11/1/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp NA


Expiration Date N.A

Code Case NAA

Year Built

Repaired, A�M �Repairedl, Replaced, or

Replacement

7. Description of Work REPAIR CLASS 2 SAFETY INJECTION SYSTEM 2" HANGER RSI-H73 DUE TO UNSPREAD COTTER PIN.


Other n

El Pneumatic

Pressure

Elpsi

Nominal Operating Pressure

Test Temp.

--] Exempt

deg. F



ASME Code Stamped

REPAIREDNA 1967NA

NIS-2 (Back)

Sheet 2 of 2

Date: . 11/1/2001





ASME Code Section XI. Repair or Replacement



Signed ZSA4•V . •Jg? A o it. J OL, M Date ,20 L





have inspected the components described in the Owner's Report during the period 7- ,T-" to /- -3/-02., and state that


in this Owner's Report in accordance with the requirements of the ASME Code, Section XL.





s uCommissions NB7741, I, N, IS, A WIS 100024

pectors Signature National Board, State, Province, and Endorsements

Date .-• 20 o'-



1. Owner Wisconsin Public Service Corporation Date 11/1

700 North Adams P.O.Box 19001 Green Bay, WI 54307-9001 Sheet 1

2. Plant Kewaunee Nuclear Power Plant Unit No.

N490 HWY 42 Kewaunee. WI 54216-9511 Work Order

3. Work Performed By Nuclear Management Company, LLC Type Code

700 First Street, Hudson, Wisconsin 54016 Authorizatio

4. Identification of System 33 Class 2_ SAFETY INJECTION Expiration D

5. (a) Applicable Construction Code B31.1-1967 Code Case



Name of

Component

RSI-H74

Name of

Manufacturer



NA

National Board No.

NA

Other ID

NA 1967 REPAII�U

Year Built

/2001 of 2

1

01-016956

Sym. Stamp NA

nNo. NA

late NA

NA

Repa•ired, Replaced, or Replacement

7. Description of Work REPAIR CLASS 2 SAFETY INJECTION 2" HANGER RSI-H74 DUE TO LOOSE NUT.


Other D

Pneumatic F

Pressure


psi Test Temp.

El Exempt [-7 deg. F



M�IYI�

Code Stamped

REPAIRED1967NA

NIS-2 (Back)

Sheet 2 of 2

Date: 11/1/2001





ASME Code Section Xl. Repair or Replacement



Signed 44& L-"O Date 4Ak M ,20 0





have inspected the components described in the Owner's Report during the period 7--V-1V to /-•i"-2,, and state that


in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.





4 12 .,0 Commissions NB7741, I, N, IS, A WIS 100024

Dae-20 ___

National Board, State, Province, and Endorsementst nspector's ,2nature









4. Identification of System 05A Class 2 FEEDWATER




Name of

Component

FDW-H170


ITT GRINNEL COMPANY


NF

National Board No.

NA

Other ID

NA 1967 REPAI RED N

Date 11/16/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NNA

Code Case NA

Year Built

Nep�I[�u, MOIViE

Repaired, Replaced, or Replacement

7. Description of Work REPAIR CLASS 2 FEEDWATER SYSTEM 16" SUPPORT FDW-H170 DUE TO LOOSE NUTS.

8. Tests conducted Hydrostatic F

Other DPneumatic D-]Pressure


psi Test Temp.

1:1 Exempt E'

deg. F



Code Stamped

REPAI RED IN1967NA

NIS-2 (Back)

Sheet 2 of 2

Date: 11/16/2001

Name of Component: FDW-H170


Date / 20 -__ _






Signed PC/W.t"J .VJ.,l.W.dI0, V2l"J Date • ,20 a





have inspected the components described in the Owner's Report during the period 7-.2)VP to /-/-#1, and state that




the examinations and corrective measures described in this Owners Report. Furthermore, neither the Inspector nor



""-" Commissions NB7741, I, N, IS, A WIS 100024

ýnspectors ý4nature National Board, State, Province, and Endorsements

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT As Required by the Provisions of the ASME Code Section XI







4. Identification of System 05B Class 2 AUXILIARY FEEDWATER




Name of

Component

FDW-H39


ITT GRINNEL COMPANY


NA

National Board No.

NA

Other ID

NA 1967 REPAIRED N

Date 11/16/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N.A


Expiration Date NA

Code Case NA

Year Built



7. Description of Work REPAIR CLASS 2 AUXILIARY FEEDWATER SYSTEM 3" HANGER FDW-H39 DUE TO LOOSE NUT ON PIPE CLAMP.


Other F

El Pneumatic

Pressure


psi Test Temp.

D: deg. F



ASME Code Stamped

Exempt []

REPAIRED N1967NA

NIS-2 (Back)

Sheet 2 of 2

Date: 11/16/2001








Signed Y g%/e, /1kA/1A41WJ5KZ1 MAMA owrj Looj&ýDate _ 20 OX I Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period 7- 2y-i" to /- 31-OZ , and state that







Commissions NB7741, I, N, IS, A WIS 100024

Inspector's S;(nature National Board, State, Province, and Endorsements

Date-e / ,20 D













Name of Component

FDW-H43


ITT GRINNEL COMPANY


NA

National Board No.

NA NA 1967 K�HAl�U I"

Other ID

Date 11/15/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp NA.


Expiration Date NA

Code Case NA

Year Built

Repaired, ASM ERepaired, Replaced, or

Replacement

7. Description of Work REPAIR CLASS 2 AUXILAIRY FEEDWATER SYSTEM 3" HANGER FDW-H43 DUE TO LOOSE NUT ON THE PIPE

CLAMP.

8. Tests conducted Hydrostatic ]

Other [Pneumatic Li Pressure


psi Test Temp.

n Exempt r•

deg. F



ASME Code Stamped

REPAIRED INNA 1967NA

NIS-2 (Back)

Sheet 2 of 2

Date: 11/15/2001








Signed Date__ ___ __ _2Dat 2 tQ

Owner or Owner's Designee, Title U




have inspected the components described in the Owner's Report during the period '7-o.rOe to 1-3t-OZ , and state that








Inspector Signature National Board, State, Province, and Endorsements

Date / 20 0 L"

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT As Required by the Provisions of the ASME Code Section X1




N490 HWY 42 Kewaunee. WI 54216-9511







Name of

Component

FDW-H44

Name of

Manufacturer

ITT GRINNEL COMPANY


NA

National Board No.

NA

Other ID

NA

Date 11/16/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1967



REPAIRED

7. Description of Work REPAIR CLASS 2 AUXILAIRY FEEDWATER SYSTEM 3" HANGER FDW-H44 DUE TO LOOSE NUT ON THE PIPE

CLAMP.


Other D

Pneumatic

Pressure


psi Test Temp.

0l deg. F



ASME Code

Stamped

N

Exempt El

N

NIS-2 (Back)

Sheet 2 of 2

Date: 11/16/2001








Signed Iý ?,- Date••".i~at•-/--'4•P • (0.l~'l4/ Dh6t4 ,20 OcL





have inspected the components described in the Owner's Report during the period '7--F-7 to / -• ,and state that







•4, Commissions NB7741, I, N, IS, A WIS 100024

nspector's Signa ure National Board, State, Province, and Endorsements

Date / 20 ___'-


1. Owner Wisconsin Public Service Corooration






4. Identification of System 89A Class MC BUILDINGS - STRUCTURES

5. (a) Applicable Construction Code SEC. Il-CL.B-1965W

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1992 ADDENDA


Name of

Component

RBCV

Name of

Manufacturer

CHICAGO BRIDGE AND IRON


C4454

National Board No.

NA

Other ID

1S-0002

Date 11/24/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N.•A


Expiration Date NA

Code Case NA

Year Built

1969


REPAIRED

7. Description of Work REPAIR CLASS MC (METAL CONTAINMENT) REACTOR BUILDING CONTAINMENT VESSEL MOISTURE BARRIER

BONDING BETWEEN ELEVATION 606' AND METAL CONTAINMENT.


Other 1

Dl Pneumatic

Pressure

D- Nominal Operating Pressure

psi Test Temp.

Exempt Li

deg. F



ASME Code

Stamped

Y

NIS-2 (Back)

Sheet 2 of 2

Date: 11/24/2001

Name of Component: RBCV







Signed.20





have inspected the components described in the Owner's Report during the period T'7-Ar'- to /-31-03-, and state that








nspector's nature National Board, State, Province, and Endorsements

Date / ,20 D,..











(b) Applicable Edition of Section Xi Utilized for Repairs or Replacements 1989


Name of

Component

S1-13B


VELAN VALVE CORPORATION


NF

National Board No.

NA

Other ID

S1116-002 1967 R�PLAC�M�N I N

Date 12/1/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

I�p�ir�u, P.�IVIE


7. Description of Work REPAIR CLASS 1 6" SAFETY INJECTION SYSTEM VALVE SI-13B DUE TO 4 PIN HOLE LEAKS IN THE SEAL WELD

INCLUDING REPLACING 4 STUDS.

8. Tests conducted Hydrostatic El

Other D]Pneumatic "

Pressure 2240 psi


Test Temp. f55 deg. F



Code Stamped

Exempt F

REPLACEMENT N1967S1 116-002

NIS-2 (Back)

Sheet 2 of 2

Date: 12/1/2001

Name of Component: S1-13B



We Certify that the statements made in the report are correct and this REPLACEMENT conforms to the rules of the




Signed &UN44 . •d w Date L 20 Q





have inspected the components described in the Owner's Report during the period 7-15r-,90' to /- 3 /-, and state that







Commissions NB7741, I1 N, IS, A WIS 100024

Inspector's ignature National Board, State, Province, and Endorsements

Date / ,20 0,__







700 First Street. Hudson, Wisconsin 54016

4. Identification of System 89A Class MC BUILDINGS - STRUCTURES

5. (a) Applicable Construction Code SEC. III-CL.B-1965W

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1992 ADDENDA


Name of

Component

EMRG. AIRLOCK


CHICAGO BRIDGE AND IRON


C4454

National Board No.

NA 1S-0002 1969 t�.MAI �tU I

Other ID

Date 11/21/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

Repaired, ASMERepaired, Replaced, or

Replacement

7. Description of Work REPAIR CLASS MC METAL CONATINMENT EMERGENCY AIRLOCK DUE TO BOLT NOT FLUSH WITH SURFACE.


Other F"

El Pneumatic

Pressure

R7psi


Test Temp.

Exempt Li

deg. F



ASME Code Stamped

REPAIRED ,f1S-0002 1969NA

NIS-2 (Back)

Sheet 2 of 2

Date: 11/21/2001

Name of Component: EMRG. AIRLOCK







Signed • • ••1 Date - " ,20 Oý





have inspected the components described in the Owner's Report during the period 7-23-'o to -3/-,2. , and state that


in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.





7ýý .-,Commissions NB7741, 1, N, IS, A WIS 100024

pector's Si" ature National Board, State, Province, and Endorsements

Date ; -.1"- .20 __ _._.












Name of

Component

S1-13B

Name of

Manufacturer



NF

National Board No.

NA

Other ID

S1116-002

Date 12/1/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1967 REPAIRED N



7. Description of Work REMOVE GOUGES AND PREPARE GASKET SURFACE OF CLASS 1 SAFETY INJECTION SYSTEM 6" VALVE SI

13B BONNET SURFACE.


Other j

Pneumatic El Pressure 2240 psi


Test Temp. 551 deg. F



ASME Code

Stamped

Exempt

REPAIRED N1967

NIS-2 (Back)

Sheet 2 of 2

Date: 12/1/2001

Name of Component: SI-13B







Signed Owwvf Date .20 "





have inspected the components described in the Owner's Report during the period "7-21o-ap to __3_-9__ , and state that







Commissions NB7741, 1, N, IS, A WIS 100024

Inspectors ignature National Board, State, Province, and Endorsements

Da tee 20 99,A









4. Identification of System 34 Class 2 RESIDUAL HEAT REMOVAL




Name of

Manufacturer



NA

National Board No.

NA

Other ID

NA

Date 11/26/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp NA.


Expiration Date NA

Code Case NNA

Year Built

1967 REPAIRED N

Hepaired, A�MLRepaired, Replaced, or

Replacement

7. Description of Work REPAIR CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 8" HANGER RHR-H18 DUE TO LOAD SETTING OF SCALE.

8. Tests conducted Hydrostatic "

Other n

Pneumatic -

Pressure


psi Test Temp.



Name of

Component

RHR-H18

ASME Code Stamped

D: deg. F

Exempt El

REPAIRED IN1967

NIS-2 (Back)

Sheet 2 of 2

Date: 11/26/2001

Name of Component: RHR-H18







Signed P - -- eOU Date 20 0





have inspected the components described in the Owner's Report during the period 7-0.S'- C.V to ________ , and state that







,1 -ý7ý Commissions NB7741, I, N, IS, A WIS 100024

National Board, State, Province, and Endorsements-- lnspector's S(nature

Date- ,'/ ,20 9 5La7


As Required by the Provisions of the ASME Code Section Xl











Name of

Component

RHR-H24

Name of

Manufacturer



NA

National Board No.

NA

Other ID

NA 1967 REPAIRED N

Date 11/26/2001

Sheet I of 2

Unit No. 1


Type Code Sym. Stamp N__A


Expiration Date NA

Code Case NA

Year Built

Kepalreo, A�M �Repaired, Replaced, or

Replacement

7. Description of Work REPAIR CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 8" HANGER RHR-H24 DUE TO MISALIGNMENT OF

SUPPORT.


Other F]

Pneumatic F1 Pressure


psi Test Temp.

D: deg. F



Code Stamped

Exempt E

REPAIRED NNA 1967

NIS-2 (Back)

Sheet 2 of 2

Date: 11/26/2001

Name of Component: RHR-H24







Signed Date 20 0.1





have inspected the components described in the Owner's Report during the period 7-,Sr-6' to /- .3/'-OZ , and state that







nsp C .Commissions NB7741, I, N, IS, A WIS 100024

nspector's Sig re National Board, State, Province, and Endorsements

Da ate7• •4 20 0












Name of

Component

RSI-H7


ITT GRINNELL VALVE CO.


NA

National Board No.

NA

Other ID

NA 1967 REPAIRED N

Date 11/26/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built



7. Description of Work REPAIR CLASS 1 SAFETY INJECTION SYSTEM 2" SUPPORT RSI-H7 DUE TO DAMAGED SPRING CAN.

8. Tests conducted Hydrostatic []

Other F

Pneumatic R

Pressure


psi Test Temp.

D3 deg. F



ASME Code Stamped

Exempt 17

REPAIRED N1967NA

NIS-2 (Back)

Sheet 2 of 2

Date: 11/26/2001








Signed /4.,6 t I.TIVA•OffN ,O"m,. Date JA,20 _.L_





have inspected the components described in the Owner's Report during the period I.- 29.'-P to /- 3/-0 ZI., and state that







9 sp tCommissions NB7741, I, N, IS, A WIS 100024

ospector's SiLgature National Board, State, Province, and Endorsements

Date 20 01:4-












Name of

Component

RHR-3B

Name of

Manufacturer

CRANE COMPANY


NF

National Board No.

NA

Date 12/19/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Other Year ID Built

AC034-002 1972 REPAIRED N

ICepaireu, M�IVI�

R~epaired, Replaced, or Replacement

7. Description of Work REPAIR BONNET TO BODY LEAK BY TORQUING BOLTING ON CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 8"

VALVE RHR-3B.


Other D

R Pneumatic

Pressure

D Nominal Operating Pressure

psi Test Temp.

E] deg. F


Applicable Manufacturers Data Reports to be Attached

Code Stamped

Exempt F•

REPAIRED NAC034-002 1972

NIS-2 (Back)

Sheet 2 of 2

Date: 12/19/2001

Name of Component: RHR-3B







Signed (O Date 20 Q2 Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period 7-;r-00 to I/-3zNC , and state that








Inspecors naNational Board, State, Province, and Endorsements

Date d, ,/ ,20 O,-P












Name of

Component

SI-9B




NA

National Board No.

NA

Other ID

S1012-002

Date 12/1/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1967


REPAIRED

7. Description of Work OPEN FOR REPACKING CLASS 2 SAFETY INJECTION SYSTEM 3" VALVE SI-9B.

8. Tests conducted Hydrostatic F] Other n

Pneumatic F Nominal Operating Pressure r

Pressure 2190 psi Test Temp. 551 deg. F



ASME Code

Stamped

N

Exempt 1

N

NIS-2 (Back)

Sheet 2 of 2

Date:. 12/1/2001








Signed 7&ifL 4c A C L ft•• L4A, v, Date te kLM4AMJ 20 0_.





have inspected the components described in the Owner's Report during the period -I- 2r-,O9 to b }-.,,, and state that







X • .Commissions NB7741, I, N, IS, A WIS 100024

(--ýpectors Sign ure National Board, State, Province, and Endorsements

Date / ,20 0 "-








4. Identification of System 36 Class 1 REACTOR COOLANT




Name of

Component

LD-3

Name of

Manufacturer

MASONEILAN INTERNATIONAL


H46695-1-2

National Board No.

NA

Date 12/3/2001

Sheet 1 of 2

Unit No. 1



Authorization No. INA

Expiration Date NA

Code Case NA

Other Year ID Built

RC011-002 1970



REPLACED N

7. Description of Work DISASSEMBLE AND INSPECT CLASS 1 REACTOR COOLANT SYSTEM 2" VALVE LD-3 AND REPLACE 8 STUDS

AND 8 NUTS.

8. Tests conducted Hydrostatic F]

Other F]Pneumatic n Nominal Operating Pressure E'




ASME Code

Stamped

Exempt El

REPLACED N

NIS-2 (Back)

Sheet 2 of 2

Date: 12/3/2001

Name of Component: LD-3



We Certify that the statements made in the report are correct and this REPLACED conforms to the rules of the




Date 20 0=1





have inspected the components described in the Owner's Report during the period ,1-5-O 0 to /-3-bZ, and state that








4/setors Sign6(ure National Board, State, Province, and Endorsements

Date 1' 20 T,


1. Owner Wisconsin Public Service Corooration







5. (a) Applicable Construction Code NA



Name of

Component

SG-AH-1

Name of

Manufacturer

MCDOWELL WELLMAN


25.12620.004-1

National

Board No.

NA

Other

ID

1S-0066

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1971


REPLACEMENT

7. Description of Work REBUILD 900 KIP HYDRAULIC SNUBBER ON CLASS 2 MAIN STEAM AND STEAM DUMP SYSTEM STEAM GENEARTOR IA.


Other L]-l Pneumatic

Pressure

-1DNominal Operating Pressure

psi Test Temp.



ASME Code

Stamped

N

D: deg. F

Exempt FR

NIS-2 (Back)

Sheet 2 of 2

Date: 12/3/2001

Name of Component: SG-AH-1







Signed & "9LAdJ ZM5dAA, &ti-L" ' Owner or Owner's Designee, Title

Date 20 0,;0




have inspected the components described in the Owner's Report during the period 745r-', to /--,/I-Z , and state that








Inspector's S~i ature National Board, State, Province, and Endorsements

Date 6A"• / 20 0,70












Name of

Component



National Board No.

Other ID

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built



25.12620.004-7 NA 1S-0066 1971 REPLACEMENT N

7. Description of Work REBUILD 900 KIP HYDRAULIC SNUBBER ON CLASS 2 MAIN STEAM AND STEAM DUMP SYSTEM STEAM

GENERATOR lB.

8. Tests conducted Hydrostatic El

Other r--

Pneumatic

Pressure

El Nominal Operating Pressure

psi Test Temp.

-- Exempt 17

deg. F



SG-AH-2 MCDOWELL WELLMAN

ASME Code

Stamped

REPLACEMENT N

NIS-2 (Back)

Sheet 2 of 2

Date: 12/3/2001

Name of Component: SG-AH-2







Signed , ewr-m- -, "* LO1 f, Date ,20 0





have inspected the components described in the Owner's Report during the period 17-2- -0O to /- J/o-02, and state that








Unspector's Siglature National Board, State, Province, and Endorsements

Date .20 '








4. Identification of System 35 Class 2 CHEMICAL AND VOLUME CONTROL




Name of

Manufacturer

AJAX IRON WORKS


6576

National

Board No.

NA

Other ID

00076

Date 2/26/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1967


REPAIRED

7. Description of Work REPAIR CLASS 2 CHEMICAL AND VOLUME CONTROL SYSTEM CHARGING PUMP 1B SUCTION VALVE.


Other DE- Pneumatic 1 Nominal Operating Pressure El




Name of

Component

APCH-11B

ASME Code

Stamped

N

Exempt 1:]

NIS-2 (Back)

Sheet 2 of 2

Date: 2/26/2001

Name of Component: APCH-1 B







Signed k &*SaNdUft4U Date 200 ;6





have inspected the components described in the Owner's Report during the period 1-7-r-00 to 1-3/1-2 , and state that








Inspector's Si ature National Board, State, Province, and Endorsements

Date a20 0 ;t-












Name of

Manufacturer

PCIENERGY SERVICES


110/1M

National

Board No.

NA

Other

ID

NA

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case N-416-2

Year Built

2001


REPLACED

7. Description of Work REPLACED WELD FOR CLASS 1 REACTOR COOLANT SYSTEM STEAM GENERATOR 1A NOZZLE TO SAFE END WELD


Other r-

Pneumatic r-

Pressure 2240 psi

Nominal Operating Pressure r7



Name of

Component

RC-W76DM

ASME Code

Stamped

N

Exempt 11

9. Remarks UTILIZATION OF ASME BOILER AND PRESSURE VESSEL CODE SECTION XI: CODE CASE N-416-2 PER NRC APPROVAL OF RELIEF REQUEST RR-G-4.

NIS-2 (Back)

Sheet 2 of 2

Date: * 12/3/2001

Name of Component: RC-W76DM







Signed ; % &4,0~ 7eýP 04& -0M-


Date 20 0


1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors


have inspected the components described in the Owner's Report during the period *1,2f-l to /- 3/1#2.., and state that







4 lns c7 &Commissions NB7741, I, N, IS, A WIS 100024

Inspector's Si National Board, State, Province, and Endorsements

Date f I ,20 0 Z












Name of

Manufacturer

PCI ENERGY SERVICES


NA

National Board No.

NA

Other ID

NA

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case N-416-2

Year Built

2001


REPLACED

7. Description of Work REPLACED WELD FOR CLASS 1 REACTOR COOLANT SYSTEM STEAM GENERATOR 1A NOZZLE TO SAFE END.

8. Tests conductedHydrostatic El Other D

Pneumatic Nominal Operating Pressure



Name of

Component

RC-W77DM

ASME Code

Stamped

N

Exempt 1


NIS-2 (Back)

Sheet 2 of 2

Date: 12/3/2001








Signed &14" Date 4 20 oA Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period 7-4U'-00 to /°.3 I'V2, and state that








nspector's Sigrature National Board, State, Province, and Endorsements

Date .• • 20 "-0-



700 North Adams P.O.Box 19001 Green Bay. WI 54307-9001









Name of

Component

RC-W78DM

Name of

Manufacturer

PCIENERGY SERVICES


110/2

National Board No.

NA

Other ID

NA

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case N-416-2

Year Built

2001

Repaired, ASM�Repaired,


REPLACED N

7. Description of Work REPLACED WELD FOR CLASS 1 REACTOR COOLANT SYTEM STEAM GENERATOR 1B NOZZLE TO SAFE END

WELD.


Other D

Pneumatic F

Pressure 2240 psi

Nominal Operating Pressure L

Test Temp. 55_1 deg. F

9. Remarks UTILIZATION OF ASME BOILER AND PRESSURE VESSEL CODE SECTION XI: CODE CASE N-416-2 PER NRC APPROVAL

OF RELIEF REQUEST RR-G-4.


ASME Code Stamped

Exempt

REPLACED N

NIS-2 (Back)

Sheet 2 of 2

Date:. 12/3/2001








Signed , R lOr. Date ,n 4 20 0.





have inspected the components described in the Owner's Report during the period __-_______ to /- 31-07-, and state that








Inspectors ,nature National Board, State, Province, and Endorsements

Date . / ,20 •''-






3. Work Performed By Nuclear Manaqement Company, LLC






Name of

Component

RC-W79DM


PCIENERGY SERVICES


110/1

National

Board No.

NA

Other ID

NA

Date 12/3/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N.AA


Expiration Date NA

Code Case N-416-2

Year Built

2001


REPLACED

7. Description of Work REPLACED WELD FOR CLASS 1 REACTOR COOLANT SYSTEM STEAM GENERATOR 1B NOZZLE TO SAFE END.


Other D

rF Pneumatic F Nominal Operating Pressure E


Exempt 1



ASME Code

Stamped

N

NIS-2 (Back)

Sheet 2 of 2

Date:. 12/3/2001








Signed && I1IWA W &OnL~n dUM" Date 20 01





have inspected the components described in the Owner's Report during the period 72 to ,/-3/-, and state that








rInspector's Si ature National Board, State, Province, and Endorsements

Date ." • 20 D ,









5. (a) Applicable Construction Code SECTION III CLASS 2



Date 12/11/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Repaired, ASME

Name of Name of Manufacturer National Other Year Replaced, or Code

Component Manufacturer Serial No. Board No. ID Built Replacement Stamped

RHR-33-1 CROSBY VALVE AND GAGE N62651-00-0001 NA ACl 15-001 1978 REPAIRED N

COMPANY

7. Description of Work REMOVE FOR TESTING CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 4" VALVE RHR-33-1.


Other F

EI Pneumatic 1"1 Nominal Operating Pressure El




Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date: 12/1/2001

Name of Component: RHR-33-1







Signed &V4ii CA194 Date 1-1 -20 Q Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period 97I,.-v, to /-3/- 0 Z., and state that







24 ,Commissions NB7741, 1, N, IS, A WIS 100024

lnspector'sSiaature National Board, State, Province, and Endorsements

Date ,C / 20 0

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENT As Required by the Provisions of the ASME Code Section X1











Name of

Manufacturer

CROSBY ASHTON GAGE COMPANY


NF

National

Board No.

NA

Date 12/1/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N..A


Expiration Date NA

Code Case NA

Other Year

ID Built

AC107-001 1971

Repaired,


REPAIRED

7. Description of Work REMOVE FOR TESTING CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 2" VALVE RHR-33.

8. Tests conducted Hydrostatic []

Other n

Pneumatic Nominal Operating Pressure




Name of

Component

RHR-33

ASME Code

Stamped

N

Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date:. 12/1/2001

Name of Component: RHR-33







Signed . If-.A 4eI4A., L Date .q 1 ,20 O.1





have inspected the components described in the Owner's Report during the period ?7-2,r-a to/- 3/-# 2- , and state that







SCommissions NB7741, , N, IS, A WIS 100024

Inspector's Sigjture National Board, State, Province, and Endorsements

Date ,20 9'9;-








4. Identification of System 23 Class 2 CONTAINMENT SPRAY




Name of

Manufacturer

WILLIAM POWELL CO.


NF

National Board No.

NA

Date 11/26/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Other Year ID Built

ICS022-001 1968



REPAIRED N

7. Description of Work OPEN FOR INSPECTION CLASS 2 CONTAINMENT SPRAY 2" VALVE Cl-1003.


Other F

Pneumatic F] Pressure 31 psi

Nominal Operating Pressure M

Test Temp. 69.6 deg. F



Name of

Component

Cl-1003

ASME Code

Stamped

Exempt 1

REPAIRED N

NIS-2 (Back)

Sheet 2 of 2

Date: .11/26/2001

Name of Component: C1-1003







Signed . a e &.a 4..'2%, AoLv ,.lý c 4 Date 6uomi 20





have inspected the components described in the Owner's Report during the period Y-Ar-a to -3d JJ-, and state that







&ýý "= -1,.,.•Commissions NB7741, I, N, IS, A WIS 100024

Inspector's jgnature National Board, State, Province, and Endorsements

Date / ,20












Name of

Manufacturer

ANCHOR/DARLING ENTERPRISES


11542-13

National Board No.

NA

Other ID

SIl15-003

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1970


REPAIRED

7. Description of Work OPEN FOR INSPECTION CLASS 1 SAFETY INJECTION SYSTEM 12" VALVE SI-21A.


Other F

Pneumatic

Pressure 2240 psi





Name of

Component

SI-21A

ASME Code

Stamped

N

Exempt 1--

NIS-2 (Back)

Sheet 2 of 2

Date:. 12/3/2001

Name of Component: SI-21A







Signed ,, 'e• . -L'-•4 0 ,X A Date 20 Q, 1





have inspected the components described in the Owner's Report during the period 1 ,-Knev to -,,31/'2, and state that







lnp ,Commissions NB7741, I, N, IS, A WIS 100024

Inspector'si ature National Board, State, Province, and Endorsements

Date -- :4 ,20 Z














ANCHOR/DARLING VALVE NF COMPANY

National Board No.

NA

Other

ID

S1115-004

Date 12/3/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1970


REPAIRED

7. Description of Work OPEN FOR INSPECTION CLASS 1 SAFETY INJECTION SYSTEM 12" VALVE SI-21B.


Other DlF Pneumatic r-1 Nominal Operating Pressure El

Pressure 2240 psi Test Temp. a55 deg. F



Name of

Component

SI-21 B

ASME Code

Stamped

N

Exempt 1]

NIS-2 (Back)

Sheet 2 of 2

Date: 12/3/2001



Date / 20






Signed I4.•, Date. ,4gADt 20 OZ Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period __-2___O' to 14/4O2-, and state that







ý_ -Commissions NB7741, 1, N, IS, A WIS 100024

National Board, State, Province, and Endorsements_.Inspector's Signature












Name of

Manufacturer

ANCHOR/DARLING ENTERPRISES


NF

National Board No.

NA

Other ID

S1115-001

Date 11/26/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N._A


Expiration Date NA

Code Case NA

Year Built

1970

Repaired, Replaced, or

Replacement

REPAIRED

7. Description of Work OPEN FOR INSPECTION CLASS 1 SAFETY INJECTION SYSTEM 12" VALVE SI-22A.


Other F

Pneumatic F

Pressure 750 psi

Nominal Operating Pressure =.




Name of

Component

SI-22A

ASME Code

Stamped

N

Exempt 1"-

NIS-2 (Back)

Sheet 2 of 2

Date: .11/26/2001








Signed LJ6 •0 •..IW .A fPA"?1 l'1, Date 20 0-1





have inspected the components described in the Owner's Report during the pedod _'__"__ to /-3/"6-a, and state that







SCommissions NB7741, I, N, IS, A WIS 100024

Inspector's nature National Board, State, Province, and Endorsements

Date 2 ,20 9

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions for the ASME Code Section XI

1. Owner: Wisconsin Public Service Corporation 700 North Adams P.O. Box 19001 Green Bay, WI 54307-9001

2. Plant: Kewaunee Nuclear Power Plant N490 HWY 42 Kewaunee WI 54216-9511

Date: 12/12/01

Sheet: 1 of 3

Unit: No.1

Work Order#: SEE BELOW

WORK ORDER WP&IR DESCRIPTION 01-007152 M-FCU-385 REMOVE AND RECONNECT SW

PIPING TO CFCU'S

Work Performed by: Bechtel Construction

Identification of System: 02 Class: 3 Name: SERVICE WATER

(a) Applicable Construction Code: USAS B31.1, 1967 Ed. , No Add. C

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add. C

Identification of Components Repaired or Replaced and Replacement Components:

ode Case: N/A

ode Case: N/A

Name of Name of Manufacturer National Other Year Repaired, ASME Component Manufacturer Serial No. Board Identification Built Replaced, Code

No. or Stamped Replacement Yes/No

See continuation sheet, page 3

7. Description of Work: REMOVE AND REINSTALL SERVICE WATER SYSTEM CONTAINMENT COOLING

CONTAINMENT FAN COIL UNITS C AND D AND ASSOCIATED SERVICE WATER LINES

8. Tests Conducted: Hydrostatic E] Pneumatic [j Nominal Operating Pressure Z Exempt E]

Other: El Pressure: 92 psi Test Temp: 44.2 0 F

Page 1 of`3

3.

4.

5.

6.

Date: 12/12/01

Name of Component: SERVICE WATER



I, the undersigned, holding a valid commission issued by the National Board of Boiler Pressure Vessel Inspectors

and the State or Providence of Wisconsin and employed by Hartford Steam Boiler Inspection and Ins. Co. of

Hartford, CT have inspected the components described in this Owner's Report during the period 0 -Uf

to I , and state that to the best of my knowledge and belief, the Owner has performed

examinations and taken corrective measures described in this Owner's Report in accordance with the

requirements of the ASME Code, Section XI

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or

implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore,

neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or

of loss of any kind arising from or connected with this inspection.

(Robert T. Ward)_ _ _ _ Commissions ' I(•A4 '

Inspector's Signature National Board, State, Province, and Endorsements

Date: /a-/•- 2001

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

Page 2 of 3

CERTIFICATE OF COMPLIANCE

We certify that the statements made in the report are correct and this repair and replacement conforms to the rules of the ASME Code, Section XI repair or replacement.

Type Code Symbol Stamp

Certificate of Authorization No. N/A Expiration Date N/A

Signed: Date/--Date Owner or Owner's Designee, Title

N/A

Continuation Sheet

Name of Component SERVICE WATER


Name of Name of Manufacturer National Other Year Repaired ASME Component Manufacturer Serial No. Board Identification: Built Replaced Code

No. Or Stamped Replacement Yes/No

CFCU C INLET N/A N/A N/A N/A N/A REPAIRED NO PIPING CFCU C OUTLET N/A N/A N/A N/A N/A REPAIRED NO PIPING CFCU D INLET N/A N/A N/A N/A N/A REPAIRED NO PIPING CFCU D OUTLET N/A N/A N/A N/A N/A REPAIRED NO PIPING 5/8" BOLTS MACKSON N/A N/A HT USY87951 N/A REPLACEMENT NO

5/8" NUT MACKSON N/A N/A HT 7307732 N/A REPLACEMENT NO

5/8" STUD MACKSON N/A N/A HT M60635 N/A REPLACEMENT NO

t t -t 1 1

t �- I I t

I* ± I I

f + I 1

+ I I 1-

Page 3 of 3



2. Plant: Kewaunee Nuclear Power PlantN490 HWY 42 Kt.w•Ni•e WI 54216-9511

Date: 12/12/01

Sheet: 1 of 5

Unit : No.1


WORK ORDER WP&IR DESCRIPTION 01-008137 M-ULR-311 Remove & Modify Upper

Lateral


Identification of System: 05A Class: 2 Name: "A" Upper Lateral inclu'

Snubber

(a) Applicable Construction Code: USAS B31.1, 1967 Ed. , No Add.

(b) Applicable Edition of Section Xl Utilized for Repairs or Replacements: 1989, No Add.


ding Spring Cans &

Code Case: N/A

Code Case: N/A

Name of Name of Manufacturer National Other Year Repaired, ASME

Component Manufacturer Serial No. Board Identification Built Replaced, Code



8. Description of Work: Repaired Upper Lateral Restraint and replacement of bolting and shims for upper lateral

9. Tests Conducted: Hydrostatic [] Pneumatic [] Nominal Operating Pressure F1 Exempt 0

Other: r] Pressure: psi Test Temp -F

Page 1 of 5

3.

4.

5.

6.

7.

Date: 12/12/01

Name of Component: UPPER LATERAL RESTRAINT SYSTEM.




Type Code Symbol Stamp N/A


Signed: Yi, c -,:4-.e ,Sv,- Date -! Owner or Owner's Designee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period n9-/1?2•!

to [t- ,oci , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions t,• a3 SS•"-i)A-; PYft •,'

lnspeot6Fýs Signature/ National Board, State, Province, and Endorsements

Date: r -/% 20 cý .

Page 2 of 5


Continuation Sheet



"A" Hydraulic McDowell 25.12620.004-1 N/A IS-0066 1971 Repaired No Snubber Wellman "A" Upper Lateral N/A N/A N/A N/A N/A Repaired No Ring Girder Splice Plate, Ring Colonial Ht. No. 412H07 N/A N/A 2001 Replacement No Girder, ASTM A588, Gr. A Splice Plate Bolt, Colonial HT No. 10187- N/A N/A 2001 Replacement No ASTM A540, RYE Gr.B23, Cl. 2 Splice Plate Heavy Colonial Ht. No. 8994464 N/A N/A 2001 Replacement No Hex. Nuts, A194, Trace Code SBG Gr. 2H Splice Plate Colonial Ht. No. Y85307 N/A N/A 2001 Replacement No Washers, F436 Trace Code SBH Splice Plate Heavy Colonial Ht. No. S42483 N/A N/A 2001 Replacement No Hex Nuts, A 194, Trace Code I UV Gr. 2H Bumper Plate, A588 Colonial Ht. No. BI S6214 N/A N/A 2001 Replacement No GR A Side Bumper Colonial Ht. No. l B518 N/A N/A 2001 Replacement No Bearing Plate, A588 3" Threaded Rod, Colonial Ht. No. 8991820 N/A N/A 2001 Replacement No A540 Gr. B23, Cl. 2 V" Hex. Nut, A563 Colonial Ht. No. 34467PJ N/A N/A 2001 Replacement No Washer, F436 Colonial Ht. No. 107494 N/A N/A 2001 Replacement No Side Bumper Shim, Colonial Ht. No. EIF023- N/A N/A 2001 Replacement No A36 A12 Side Bumper Shim, Colonial Ht. No. E1GI 19- N/A N/A 2001 Replacement No A36 A16 Side Bumper Shim, Colonial Ht. No. EIG 119- N/A N/A 2001 Replacement No A36 A16 Side Bumper Shim, Colonial Ht. No. B1F669- N/A N/A 2001 Replacement No A36 C16 Side Bumper Shim, Colonial Ht. No. T2866 N/A N/A 2001 Replacement No A36 Side Bumper Shim, Colonial Ht. No. A1C202- N/A N/A 2001 Replacement No A36 B20 Side Bumper Shim, Colonial Ht. No. A1D370- N/A N/A 2001 Replacement No A36 B32 Side Bumper Shim, Colonial Ht. No. B1E825- N/A N/A 2001 Replacement No A36 B16

Side Bumper Shim, Colonial Ht. No. B11F555- N/A N/A 2001 Replacement No A36 C23 Side Bumper Shim, Colonial Ht. No. 64595 N/A N/A 2001 Replacement No A109 CI010 Side Bumper Shim, Colonial Ht. No. Y07405 N/A N/A 2001 Replacement No A109 CI010 Side Bumper Shim, Colonial Ht. No. 65747 N/A N/A 2001 Replacement No A109 CI010 Side Bumper Shim, Colonial Ht. No. M06708 N/A N/A 2001 Replacement No A109 CI010 Upper Lateral Ring Colonial Ht. No. N/A N/A 2001 Replacement No Plate, A36 A1T128'3 3/8" Threaded Rod, Colonial Ht. No. 813953 N/A N/A 2001 Replacement No A307, Gr. A

Page 3 of 5


Continuation Sheet



Heavy Hex Nuts, Colonial Ht. No. A61415 N/A N/A 2001 Replacement No A563, Gr. A Std. Washer, F436, Colonial Ht. No. B16294 N/A N/A 2001 Replacement No Type 1 Upper Lateral Ring Colonial Ht. No. A1U1599 N/A N/A 2001 Replacement No Plate Shim, A36 Upper Lateral Ring Colonial Ht. No. BIP5527 N/A N/A 2001 Replacement No Plate Shim, A36 Upper Lateral Ring Colonial Ht. No AOR0914 N/A N/A 2001 Replacement No Plate Shim, A36 Upper Lateral Ring Colonial Ht. No 7467439 N/A N/A 2001 Replacement No Plate Shim, A36 Upper Lateral Ring Colonial Ht. No 1A353 N/A N/A 2001 Replacement No Plate Shim, A36 3/8" Hex Hd. Bolt, Colonial Ht. No. 8878678 N/A N/A 2001 Replacement No A307-97 3/8" Std. Washer, Colonial Ht. No. B 16294 N/A N/A 2001 Replacement No F436 Type I Ring Girder Shim, Colonial Ht. No. 1E479 N/A N/A 2001 Replacement No A36 Ring Girder Shim, Colonial Ht. No. 1E744-A N/A N/A 2001 Replacement No A36 Ring Girder Shim, Colonial Ht. No. 2A6386- N/A N/A 2001 Replacement No A36 C Ring Girder Shim, Colonial Ht. No. 2A6593- N/A N/A 2001 Replacement No A36 C

Ring Girder Shim, Colonial Ht. No. 4151614 N/A N/A 2001 Replacement No A109-CR1010 Ring Girder Shim, Colonial Ht. No. A86743 N/A N/A 2001 Replacement No A109-CRIOIO Ring Girder Shim, Colonial Ht. No. 4151614 N/A N/A 2001 Replacement No A109-CRIOIO Ring Girder Shim, Colonial Ht. No. R4747 N/A N/A 2001 Replacement No A36 Flat Bar Backing KNPP JB8913 N/A QADC 0 1-349 2001 Replacement No Strip, A36 Ring Girder Shim, Colonial Ht. No. 4125164 N/A N/A 2001 Replacement No A109-CRIOO1 Back Bumper Colonial MRR-01030 N/A N/A 2001 Replacement No Bearing Plate and Pipes ¾" Threaded Rod, Colonial Ht. No. 8991820 N/A N/A 2001 Replacement No A540 Gr B23, C12 ¾/4" Nut, A563 Colonial 31167PJ N/A N/A 2001 Replacement No

3/4" Washer, F436 Colonial 107494 N/A N/A 2001 Replacement No

Back Bumper Shim, Colonial E1F023-A12 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial EIGI 19-A16 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial B1F669-C16 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial T2866 N/A N/A 2001 Replacement No A36 I

Page 4 of 5


Continuation Sheet



Back Bumper Shim, Colonial A1C202-B20 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial A 1D370-B23 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial B1E825-B16 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial B1F555-C23 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial 64595 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial Y07405 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial 65747 N/A N/A 2001 Replacement No A36 Ring Girder Shim, Colonial Ht. No. 2A6386- N/A N/A 2001 Replacement No A36 E Ring Girder Shim, Colonial Ht. No. 2A6593- N/A N/A 2001 Replacement No A36 E Snubber Bracket Colonial Ht No C0453 N/A N/A 2001 Replacement No Shim

Page 5 of 5


1. Owner: Wisconsin Public Service Corporation700 North Adams P.O. Box 19001 Green Bay, WI 54307-9001

Date: 12/12/01

Sheet: 1 of 2

2. Plant: Kewaunee Nuclear Power PlantN490 HWY 42 K4.waiine. Wl 54216-9511I

Unit: No. 1


WORK ORDER WP&IR DESCRIPTION 01-013145 M-SGA-362 REMOVE SHIPPING COVER 01-013376 M-SDS-322 SEVER STEAM DOME 01-008136 M-SDA-370 REFURBISH STEAM DOME 01-013376 M-SDA-372 RE-INSTALL STEAM DOME

3.

4.

5.

6.


Identification of System: 05/06 Class: 2 Name: "A" Steam Generator Secondary Side

(a) Applicable Construction Code: USAS B31.1, 1967 Ed. , No Add. Code Case:

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add. Code Case:


N/A

N-416-2


Component Manufacturer Serial No. Board Identification Built Replaced, Code No. or Stamped

Replacement Yes/No

Steam Dome Westinghouse 1141 68-28 N/A 1970 Repaired Yes

Replacement SG Ansaldo 202 151 N/A 2000 Replacement Yes Lower assembly Feedwater Nozzle PCI FW # 1 N/A MRR-01019 2001 Replacement No

Adaptor Main Steam Flow Ansaldo N/A N/A QADC-01-041 2000 Replacement No

Limiter

_________________ I _______________ ______________ _________ '. ________________ ..- _____ -

7. Description of Work: Prep New lower assembly for Steam Dome installation, Remove Steam Dome from

the Old Lower Assembly, Refurbish the Feedwater Nozzle, Install the Main Steam Flow Limiter, Install the

Steam Dome on the New Lower Assembly

8. Tests Conducted: Hydrostatic El Pneumatic El Nominal Operating Pressure *

Other: E] Pressure: 1040 psi Test Temp: 549.35°F

* NOTE: The Secondary Side Hydrotest was conducted at NOP per Code Case N-416- 2

Exempt E]

Page 1 of2

Kewaunee WI 54216-9511

Date: 12/12/01

Name of Component: SG # A

Work Order Number: 01-013145, 01-008136, 01-013376.




Certificate of Authorization No. N/A

Signed: -- ' 1(uf% /

Expiration Date N/A

Date (.

uwner or uwner s uesigjnee, I We




Hartford, CT have inspected the components described in this Owner's Report during the periodn'-/7Z-

to I- t'p , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions f t n ý • </ 'I I/a.(

Inspector s Signature/ National Board, State, Province, and Endorsements

Date: 200\

Page 2 of 2



2. Plant: Kewaunee Nuclear Power PlantN490 HWY 42 Kp~w•inp.• WI 54216-9511I

Date: 12/12/01

Sheet: 1 of 4

Unit: No.1

Work Order# : SEE BELOW

WORK ORDER WP&IR DESCRIPTION 01-013376 M-LLR-314 Replace Upper Col.

Adapters and Reshim Lower Lateral Restraint

3.

4.

5.

6.


Identification of System: 36 Class: 1 Name: "B" Col. Adapter Plates and Lower Lateral Shims

(a) Applicable Construction Code: USAS B31.1, 1967 Ed., No Add. Code Case: N/A

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add. Code Case: N/A





7. Description of Work: Replaced steam generator support upper column adapters and removed and restored

lower lateral support bumper guides to the steam generator and shimmed the adjacent support bumper steel.

Exempt 0

Page 1 of 4

8. Tests Conducted: Hydrostatic E] Pneumatic E Nominal Operating Pressure El

Other: [] Pressure: psi Test Temp


Date: 12/12/01

Name of Component: "B" Upper Col. Adapter Plates and Reshim Lower Lateral Restraint.






Signed: KA%• , . -5,,Owner or Owner's Desianec

Expiration Date N/A

Dateý.2.//,Mw




Hartford, CT have inspected the components described in this Owner's Report during the period 05 -,/ti1

to . - , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward)__ Commissions ^'-Z3 ii c c•V('i9V'

Inspector's Signature/ National Board, State, Province, and Endorsements

Date [1 1 2001

Page 2 of 4

•. I Itl•


Continuation Sheet

Name of Name of Manufacturer National Other Year Repaired ASME

Component Manufacturer Serial No. Board Identification: Built Replaced Code No. Or Stamped

Replacement Yes/No

Shims Colonial Ht. No. 4125164 N/A N/A 2001 Replacement No

Shims Colonial Ht. No. A86743 N/A N/A 2001 Replacement No

Shims Colonial Ht. No. 4151614 N/A N/A 2001 Replacement No

Shims Colonial Ht. No. 2A6593- N/A N/A 2001 Replacement No

A

Shims Colonial Ht. No. T 1273-A N/A N/A 2001 Replacement No

Shims Colonial Ht. No. 1 E802 N/A N/A 2001 Replacement No

Shims Colonial Ht. No. R6759 N/A N/A 2001 Replacement No

Shims Colonial Ht. No. 2A6387- N/A N/A 2001 Replacement No A


Shims Colonial Ht. No. 2A6593- N/A N/A 2001 Replacement No

E

Shims Colonial Ht. No. 2A6386- N/A N/A 2001 Replacement No D

Shims Colonial Ht. No. 2A6384- N/A N/A 2001 Replacement No A

Shims Colonial Ht. No. TI273-B N/A N/A 2001 Replacement No


Shims Colonial Ht. No. 1E803 N/A N/A 2001 Replacement No


Shims Colonial Ht. No. 1E542 N/A N/A 2001 Replacement No

1" Bolts A325 Colonial Ht. No. 706907 N/A N/A 2001 Replacement No

1" Bolts A325 Colonial Ht. No. 213265 N/A N/A 2001 Replacement No

1" Flat Washers Colonial Ht. No. B28393 N/A N/A 2001 Replacement No

F436-93

I" Hex. Hd. Nuts Colonial Ht. No. S41165 N/A N/A 2001 Replacement No

A194 Gr. 2H ¾" Bolt, A-490 Colonial Ht. No. 8996654 N/A N/A 2001 Replacement No

¾" Lockwashers Colonial Ht. No. 43739D N/A N/A 2001 Replacement No

B 18.21 S.G. Col. Adapter Colonial Fabricated N/A MRR 01042 2001 Replacement No

A588 Assembly

Page 3 of 4


Component Manufacturer Serial No. Board Identification: Built Replaced Code


S.G. Col. Adapter Colonial Ht. No. N/A N/A 2001 Replacement No

Pin AISI 4340 8996496C0477 2 0 R p a e n N

S.G. Col. Adapter Colonial Ht. No. N/A N/A 2001 Replacement No

Pin Washer A-588, 803M62250 Gr. A S.G. Col. Adapter Colonial Ht. No. 255029 N/A N/A 2001 Replacement No

Pin Washer Bolts Trace Code I UX A-325 S.G. Adapter Col. Colonial Ht. No. 10618 N/A N/A 2001 Replacement No

Adapter Bolts A- Trace No. IUU 54 0, G r. B 23 , C l. 2 2001_R place entN

S.G. Adapter Col. Colonial Ht. No. S42483, N/A N/A 2001 Replacement No

Jam Nuts, SA307 Trace No. IUY Gr. B S.G. Adapter Col. Colonial Ht. No. 8994464 N/A N/A 2001 Replacement No

Heavy Hex. Nut, Ht Code SBG SA 194 Gr. 2H

S.G. Col. Adapter Colonial Ht. No. 8997945 N/A N/A 2001 Replacement No

Washers AISI 4150 Trace Code I UW I-- I

I. I* -I- I 1

_______ I + I I 1

_______ I F + I I 1

_________ F F I I I 1

_______ I F I I I t

_ _ _ _ _ I I

I I I -1I

Page 4 of 4



2. Plant: Kewaunee Nuclear Power Plant N490 HWY 42 Kewaunee, WI 54216-9511

Date: 12/13/01

Sheet: 1 of 2

Unit: No. 1


WORK ORDER WP&IR DESCRIPTION 01-008135 M-BDA-382 S.G. "A" BLOWDOWN CUT / REWELD 01-008135 M-BDB-383 S.G. "B" BLOWDOWN CUT / REWELD 01-013145 M-SGA-364 S.G. "A" SMALL BORENOZZLE PREPS 01-013145 M-SGB-365 S.G. "B" SMALL BORE NOZZLE PREPS

3. Work Performed by: Bechtel Construction

4. Identification of System: 07 Class: 2 Name: BLOWDOWN

5. (a) Applicable Construction Code: USAS B31.1, 1967 Ed. , No Add.

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add.

Code Case: N/A

Code Case: N-416-2

6. Identification of Components Repaired or Replaced and Replacement Components:



SG LOOP-A N/A N/A N/A N/A N/A Repaired No BLOWDOWN PIPING SG LOOP-A ANSALDO 202 151 N/A 2000 Replacement Yes LOWER ASSY BLOWDOWN NOZZLE SG LOOP-B N/A N/A N/A N/A N/A Repaired No BLOWDOWN PIPING SG LOOP-B ANSALDO 201 150 N/A 2000 Replacement Yes LOWER ASSY BLOWDOWN NOZZLE

7. Description of Work: TEMPORARY REMOVAL OF EXISTING BLOWDOWN PIPING AT EACH STEAM

GENERATOR OUTLET NOZZLE AND PREPERATION OF BLOWDOWN NOZZLES ON NEW STEAM

GENERATOR LOWER ASSEMBLIES. ALL PIPING WAS PREPARED AND REINSTALLED BY WELDING.

8. Tests Conducted: Hydrostatic F] Pneumatic E] Nominal Operating Pressure [* Exempt rl

Other: [] Pressure: A-1040 psi / B-1030 psi Test Temp: A-549.35°F / B-548.17°F


Page 1 of2

Date: 12/13/01

Name of Component: BLOWDOWN




N/AType Code Symbol Stamp


Signed: • 4• Ak•qJftR SA-,cz5'"-Owner or Owner's Designee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period 65 -I>"-•

to 1 tI ' \ , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions r,3 ii S-) A,.Qi L-'- /( Y 9

Inspect& 'SIgf' ture National Board, State, Province, and Endorsements

Date: ___ _ .2001


Continuation Sheet

Page 2 of 2

Date I/j*a/K L


1. Owner: Wisconsin Public Service Corporation700 North Adams P.O. Box 19001 Green Bay, WI 54307-9001

Date: 12/13/01

Sheet: 1 of 5

2. Plant: Kewaunee Nuclear Power PlantN490 HWY 42 IKowai~n•. WI 54216-9511

Unit: No. 1


WORK ORDER WP&IR DESCRIPTION 01-008137 M-ULR-312 Remove & Modify Upper

Lateral


4. Identification of System: 5A Class: 2 Name: "B" Upper Lateral inclu

Snubber

5. (a) Applicable Construction Code: USAS B31.1, 1967 Ed., No Add.



ding Spring Cans &

Code Case: N/A

Code Case: N/A

Name of Name of Manufacturer National Other Year Repaired, ASM: Component Manufacturer Serial No. Board Identification Built Replaced, Code


See continuation sheet, page 3 1

4- -k I F I

4- 4- 4 1 F I

4- I I F I

__________ .1. _________ L ________ A ______ i __________ L ___ J

7. Description of Work: Repaired Upper Lateral Restraint and replacement of bolting and shims for upper lateral

8. Tests Conducted: Hydrostatic E] Pneumatic E] Nominal Operating Pressure n Exempt Z

Other: n Pressure: psi Test Temp oF.

Page 1 of 5


Date: 12/13/01

Name of Component: UPPER LATERAL RESTRAINT SYSTEM.






Signed: 2L4 ý KL-pPpmq;ýSý

Expiration Date N/A

Date / i/ol"Owner or Owner's Designee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period C9-/'f2"rl

to - K-'0"• , and state that to the best of my knowledge and belief, the Owner has performed






of loss of any kind arising from or connected wi this inspection.

(Robert T. Ward) Commissions p / i-•?ApJ/? L-j •"/i('$'

Inspec sSignature/ National Board, State, Province, and Endorsements

Date: 2001

Page 2 of 5

Name of Component

"B" Hydraulic Snubber "B" Upper Lateral Ring Girder Splice Plate, Ring Girder, ASTM A588, Gr. A Splice Plate Bolt, ASTM A540, Gr.B23, Cl. 2 Splice Plate Heavy Hex. Nuts, A194, Gr. 2H Splice Plate Washers, F436 Splice Plate Heavy Hex Nuts, A 194, Gr. 2H Bumper Plate, A588 Side Bumper Bearing Plate, A588 ¾" Threaded Rod, A540 Gr. B23, Cl. 2 ¾" Hex. Nut, A563 Washer, F436 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A36 Side Bumper Shim, A109 CIO10 Side Bumper Shim, A109 C1010 Side Bumper Shim, A109 CI010 Side Bumper Shim, A109 CI010 Washer Plate, A36

Upper Lateral Ring Plate, A36

Nai Ma

N/A

N/A

Col


Continuation Sheet

me of Manufacturer National Other Year Re

nufacturer Serial No. Board Identification: Built Re No. Or

Re

N/A N/A N/A N/A Re

k N/A N/A N/A N/A Re

onial Ht. No. 412H07 N/A N/A 2001 Re

Colonial

Colonial

Colonial

Colonial

Colonial Colonial

Colonial

Colonial Colonial Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

Colonial

HT No. 10187RYE

Ht. No. 8994464 Trace Code SBG

Ht. No. Y85307 Trace Code SBH Ht. No. S42483 Trace Code I UV

Ht. No. BIS6214 Ht. No. 1B518

Ht. No. 8991820

Ht. No. 34467PJ Ht. No. 107494 Ht. No. EIF023A12 Ht. No. E1GI19A16 Ht. No. EIG119A16 Ht. No. B1F669C16 Ht. No. T2866

Ht. No. Al C202B20 Ht. No. A1D370B32 Ht. No. BIE825B16 Ht. No. BIF555C23 Ht. No. 64595

Ht. No. Y07405

Ht. No. 65747

Ht. No. M06708

Ht. No. 404875

Ht. No. A1T1203

N/A N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A N/A N/A N/A

N/A N/A

N/A N/A N/A N/A N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

Re

paired placed

placement

paired

paired

placement

placement F

ASME Code Stamped Yes/No No

No

No

No

No

No

No

No No

No

No No No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

Page 3 of 5

Re2001

2001

2001

2001

2001 2001

2001

2001 2001 2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

Replacement

Replacement

Replacement

Replacement Replacement

Replacement

Replacement Replacement Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement


Continuation Sheet



3/8" Threaded Rod, Colonial Ht. No. 813953 N/A N/A 2001 Replacement No A307, Gr. A

Heavy Hex Nuts, Colonial Ht. No. A61415 N/A N/A 2001 Replacement No A563, Gr. A

Std. Washer, F436, Colonial Ht. No. B 16294 N/A N/A 2001 Replacement No Type I Upper Lateral Ring Colonial Ht. No. AIU1599 N/A N/A 2001 Replacement No Plate Shim, A36

Upper Lateral Ring Colonial Ht. No. BIP5527 N/A N/A 2001 Replacement No Plate Shim, A36

3/8" Hex Hd. Bolt, Colonial Ht. No. 8878678 N/A N/A 2001 Replacement No A307-97 3/8" Std. Washer, Colonial Ht. No. B16294 N/A N/A 2001 Replacement No F436 Type I Ring Girder Shim, Colonial Ht. No. 1E479 N/A N/A 2001 Replacement No A36 Ring Girder Shim, Colonial Ht. No. 1 E744 N/A N/A 2001 Replacement No A36 Ring Girder Shim, Colonial Ht. No. 2A6386- N/A N/A 2001 Replacement No A36 C Ring Girder Shim, Colonial Ht. No. 2A6593- N/A N/A 2001 Replacement No A36 C Ring Girder Shim, Colonial Ht. No. 4151614 N/A N/A 2001 Replacement No A109-CRI010 Ring Girder Shim, Colonial Ht. No. A86743 N/A N/A 2001 Replacement No

A109-CRIOIO Ring Girder Shim, Colonial Ht. No. R4747 N/A N/A 2001 Replacement No A36 Flat Bar Backing KNPP JB8913 N/A QADC 01-349 2001 Replacement No Strip, A36 Ring Girder Shim, Colonial Ht. No. 4125164 N/A N/A 2001 Replacement No A109-CRIOIO Back Bumper Colonial MRR-01030 N/A N/A 2001 Replacement No Bearing Plate and Pipes ¾" Threaded Rod, Colonial Ht. No. 8991820 N/A N/A 2001 Replacement No A540 Gr B23, C12 ¾" Nut, A563 Colonial 31167PJ N/A N/A 2001 Replacement No

¾" Washer, F436 Colonial 107494 N/A N/A 2001 Replacement No

Back Bumper Shim, Colonial E1F023-A12 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial EIGI 19-A16 N/A N/A 2001 Replacement No

A36 Back Bumper Shim, Colonial BIF669-C16 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial T2866 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial A1C202-B20 N/A N/A 2001 Replacement No A36

Back Bumper Shim, Colonial A1D370-B23 N/A N/A 2001 Replacement No A36 Back Bumper Shim, Colonial B1E825-B16 N/A N/A 2001 Replacement No A36

Page 4 of 5


Continuation Sheet


Component Manufacturer Serial No. Board Identification: Built Replaced Code No. Or Stamped

Replacement Yes/No

Back Bumper Shim, Colonial BIF555-C23 N/A N/A 2001 Replacement No

A36 Back Bumper Shim, Colonial 64595 N/A N/A 2001 Replacement No

A36 Back Bumper Shim, Colonial Y07405 N/A N/A 2001 Replacement No

A36 Back Bumper Shim, Colonial 65747 N/A N/A 2001 Replacement No

A36 Ring Girder Shim, Colonial Ht. No. 2A6386- N/A N/A 2001 Replacement No

A36 E

Ring Girder Shim, Colonial Ht. No. 2A6593- N/A N/A 2001 Replacement No

A36 E

¾" Nut, A563-93 Colonial 107494 N/A N/A 2001 Replacement No

TYPE 1 1 1

Page 5 of 5


As Required by the Provisions for the ASME Code Section XI



Date: 12/12/01

Sheet: 1 of 2

Unit: No.1


WORK ORDER WP&IR DESCRIPTION 01-013145 M-SGB-363 REMOVE SHIPPING COVER 01-013376 M-SDS-323 SEVER STEAM DOME 01-008136 M-SDB-371 REFURBISH STEAM DOME

01-013376 M-SDB-373 RE-INSTALL STEAM DOME


4. Identification of System: 05/06 Class: 2 Name: "B" Steam Generator Secondary Side

5. (a) Applicable Construction Code: USAS B31.1, 1967 Ed. , No Add. Code Case: N/A



Name of Name of Manufacturer National Other Year

Component Manufacturer Serial No. Board Identification Built No.

Steam Dome Westinghouse 1142 68-29 N/A 1970

Code Case: N-416-2

Repaired, Replaced, or Replacement Repaired

Replacement SG Ansaldo 201 150 N/A 2000 Replacemen Lower assembly Feedwater Nozzle PCI FW# 2 N/A MRR-01019 2001 Replacemen

Adaptor I.. ,,,, l. .

Main Steam Flow Ansaldo N/A N/A Limiter

It

t

ASME Code Stamped Yes/No Yes

Yes

No

No

7. Description of Work: Prep New lower assembly for Steam Dome installation, Remove Steam Dome from the

Old Lower Assembly, Refurbish the Feedwater Nozzle, Install the Main Steam Flow Limiter, Install the Steam

Dome on the Niew Lower seby

8. Tests Conducted: Hydrostatic E] Pneumatic El Nominal Operating Pressure Z* Exempt [1

Pressure: 1030 psi Test Temp 548.17 OF


Page 1 of 2

Other: M]

Rep ace,./ ,L!31 t nIQAUL;-U - -04-1 /-UUU

uome

on me New LOWS[ /•55•lllUly.

Date: 12/12/01

Name of Component: SG # B

Work Order Number: 01-013145, 01-013376, 01-008136.




Certificate of Authorization No. N/A Expiration Date

Signed: 4--Jp- Q -. D Owner or Owner's Designee, Title

N/A

ate___________

Page 2 of 2




Hartford, CT have inspected the components described in this Owner's Report during the period (tc-)L/"-0

to "I -' - I , and state that to the best of my knowledge and belief, the Owner has performed


requirements of the ASME Code, Section XA





(Robert T. Ward) Commissions &;& (/S5"5) tJ5F Q q iLc 4' Inspector ifgnature/ National Board, State, Province, and Endorsements

Date: I~-I•200\



2. Plant: Kewaunee Nuclear Power Plant N490 HWY 42 Kewaunee, WI 54216-9511

Date: 12/13/01

Sheet: 1 of 3

Unit: No.1


WORK ORDER WP&IR DESCRIPTION 01-008139 M-FWA-380 S.G. "A" FW /AFW CUT OUT AND WELD 01-008139 M-FWB-381 S.G. "B" FW /AFW CUT OUT AND WELD


4. Identification of System: 05A/05B Class: 2 Name: FEEDWATER / AFW

5. (a) Applicable Construction Code: USAS B31.1, 1967 Ed. , No Add. Code Case: N/A



Code Case: N-416-2


Component Manufacturer Serial No. Board Identification Built Replaced, Code No. or Stamped

Replacement Yes/No

SEE CONTINUATION, SHEET 3

7. Description of Work: TEMPORARY REMOVAL OF EXISTING FEEDWATER PIPING AT EACH STEAM

GENERATOR OUTLET NOZZLE. TEMPORARY REMOVAL OF EXISTING AUXILLARY FEEDWATER

PIPING AT THE MAIN FEEDWATER BRANCH AT EACH STEAM GENERATOR. WELD REPAIRS ON BOTH

REMOVED FEEDWATER SPOOLS AND REPLACEMENT OF FEEDWATER VENT VALVE ASSEMBLY

(FW-80 A / B) CONNECTIONS USING NEW SOCKOLET AND INSERT REDUCER FITTINGS. ALL PIPING

WAS PREPARED AND REINSTALLED BY WELDING

8. Tests Conducted: Hydrostatic Fl Pneumatic El Nominal Operating Pressure [* Exempt E]

Other: F] Pressure: [A-FW 1040 psi / AFW 1040 psi] [ B-FW 1030 psi / AFW 1030 psi]

Test Temp: [A-FW 549.351F / AFW 57 0F] [B-FW 548.17'F / AFW 57°F]


Page 1 of 3

Date: 12/13/01

Name of Component: FEEDWATER / AUXILLARY FEEDWATER



We certify that the statements made in the report are correct and this repair and replacement

conforms to the rules of the ASME Code, Section XI repair or replacement.


Certificate of Authorization No. N/A Expiration Date

Signed: o4L',- AP4UP-•P DS'or flun,�r'� n�inn�A Title

N/A

ate/ 41sl(




Hartford, CT have inspected the components described in this Owner's Report during the period 09-f!)-f I

to I (- ?P-C, , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions • A tV ) A1- .-A.' ? c/-1/'


Date: t 0) -r 20O0


Continuation Sheet

Page 2 of 3

/



SG LOOP-A N/A N/A N/A N/A N/A REPAIRED YES FEEDWATER SG LOOP-A N/A N/A N/A N/A N/A REPAIRED YES AUXILLARY FEEDWATER SG LOOP-B N/A N/A N/A N/A N/A REPAIRED YES FEEDWATER

SG LOOP-B N/A N/A N/A N/A N/A REPAIRED YES AUXILLARY FEEDWATER

SOCKOLET N/A N/A N/A HT# 2016 ANB REPLACEMENT NO

16"X 2" QADC 01-408

REDUCING N/A N/A N/A HT# 1566 ANB REPLACEMENT NO INSERT 2" X 1"

QADC 01-408

Page 3 of 3




3.

4.

5.

6.

Date: 12/12/01

Sheet: 1 of 2

Unit: No.1


WORK ORDER WP&IR DESCRIPTION 01-005474 M-IWR-394 S.G. "A" INSTALL

LEVEL INSTR. WIDE RANGE

01-005474 M-IWR-395 S.G. "B" INSTALL LEVEL INSTR. WIDE RANGE


Identification of System: 06 Class: 2 Name: MAIN STEAM AND STEAM DUMP

(a) Applicable Construction Code: USAS B31.1. 1967 Ed. , No Add. Code Case: N/A

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add. Code Case: N-416-2





CONDENSATE KNPP N/A N/A QADC 01-393 2001 REPLACEMENT NO

POT HT 85188

7. Description of Work: INSTALL NEW UPPER WIDE RANGE TAP, CONDENSATE POT AND TUBING.

8. Tests Conducted: Hydrostatic Dl Pneumatic [I Nominal Operating Pressure Z* Exempt E]

Other: E] Pressure: A-1 040 psi / B-1 030 psi Test Temp: A-549.35°F / B-548.17°F


Page 1 of 2

Date: 12/12/01

Name of Component: MAIN STEAM AND STEAM DUMP




conforms to the rules of the ASME Code, Section XI repair or replacement.



Signed: • • -/%•,"' 1F•,L k-, TIA Date Owner or Owner's Designee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period OC -0--31

to I I 3- 1•• ý , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions 0J1% 1 55") A4 UL-37- o) 4/..y


Date: t• 20-X).


Continuation Sheet

Page 2 of 2



2. Plant: Kewaunee Nuclear Power Plant N490 HWY 42 Kewaunee Wl 54216-9511

Date: 12/12/01

Sheet: 1 of 2

Unit: No.1


WORK ORDER WP&IR DESCRIPTION 01-008141 M-MSA-350 S.G. "A" MS CUT OUT AND WELD 01-008141 M-MSB-351 S.G. "B" MS CUT OUT AND WELD


4. Identification of System: 06 Class: 2 Name: MAIN STEAM

5. (a) Applicable Construction Code: USAS B31.1, 1967 Ed. ,No Add.



Code Case: N/A

Code Case: N-416-2



SG LOOP-A N/A N/A N/A N/A N/A REPAIRED YES MAIN STEAM SG LOOP-B N/A N/A N/A N/A N/A REPAIRED YES MAIN STEAM 1 "GAMMA PORT COLONIAL HT # 87261 N/A N/A 2000 REPLACEMENT NO PLUG X 1" LG MACHINE HT CODE A696 GR C COMPANY, INC. AEM 1 "GAMMA PORT WFI HT # 8998228 N/A N/A 2001 REPLACEMENT NO PLUG X 2" LG INTERNATIONAL HT CODE A696 GR C 297YNB

7. Description of Work: TEMPORARY REMOVAL OF EXISTING MAIN STEAM PIPING AT EACH STEAM

GENERATOR OUTLET NOZZLE. EXISTING PIPING WAS PREPARED AND REINSTALLED BY WELDING.

REINSTALLATION INCLUDES ADDITION OF TWO NEW RADIOGRAPHY GAMMA PORTS AND PLUGS

PER LOOP.

8. Tests Conducted: Hydrostatic E] Pneumatic E] Nominal Operating Pressure * Exempt E]

Other: 0 Pressure: A-1 040 psi/ B-1 030 psi Test Temp: A-549.35°F / B-548.17°F


Page 1 of`2

Date: 12/12/01

Name of Component: MAIN STEAM




conforms to the rules of the ASME Code, Section X1 repair or replacement.



Signed: 7,, "• -- , " .Date " Owner or Owner's Designee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period p9-/?-oj

to /I- ?-,- , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) CommissionstX3_ii&ý) A,,.; cT Y6/,

Inspec s Signature National Board, State, Province, and Endorsements

Date: h. "1 '• 20kO _


Continuation Sheet

Page 2 of 2





Date: 12/12/01

Sheet: 1 of 2

Unit: No.1


WORK ORDER WP&IR DESCRIPTION 01-008137 M-RCS-366 S.G. "A" RCS CUT OUT

AND WELD

01-008133 M-RCS-360 S.G. "A" RCS NOZZLE PREP


4. Identification of System: 36 Class: 1 Name: REACTOR COOLANT

5. (a) Applicable Construction Code: USAS B31.1, 1967 Ed. ,No Add. Code Case: N/A

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add. Code Case: N-416-2





STEAM WESTINGHOUSE 1141 68-28 NONE 1970 REPAIRED YES

GENERATOR STEAM ANSALDO 202 151 QADC-00-376 2000 REPLACEMENT YES

GENERATOR 11/2" CAP WESTINGHOUSE N/A N/A HT# 8000913, N/A REPLACEMENT NO

SCREW HT CODE RVP

1 1/2" CAP WESTINGHOUSE N/A N/A HT 204394, N/A REPLACEMENT NO

SCREW HT CODE SAZ

7. Description of Work: THE EXISTING WESTINGHOUSE LOWER ASSEMBLY WAS SEVERED FROM

REACTOR COOLANT PIPING. A NEW LOWER ASSEMBLY WAS PREPARED. INSTALLED. AND

CONNECTED TO THE REACTOR COOLANT PIPING BY WELDING.

8. Tests Conducted: Hydrostatic E] Pneumatic El Nominal Operating Pressure * Exempt El

Other: El Pressure: 2240 psi Test Temp: 551 .1OF

* NOTE: The Primary Side Hydrotest was conducted at NOP per Code Case N-416- 2

Page 1 of 2

Date: 12/12/01

Name of Component: REACTOR COOLANT

Work Order Number: 01-008137, 01-008133





Signed: .4--- 1 .. "£ K 4fA ac- -I*>v

Expiration Date N/A

Date /I/'cfOwner or Owner's DesiQnee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period 09-//9

to ___- ____, and state that to the best of my knowledge and belief, the Owner has performed


requirements of the ASME Code, Section Xl





(Robert T. Ward) Commissions S.)3115S'7,JJ. U•.- 3 2(&'1

InspecteA -Signature National Board, State, Province, and Endorsements

Date: to-r% 2001


Continuation Sheet

Page 2 of 2

f






4. Identification of System: 36 Class:

5. (a) Applicable Construction Code: USAS B31.1, 1967 E

(b) Applicable Edition of Section X1 Utilized for Repairs or

6. Identification of Components Repaired or Replaced

Name of Name of Manufacturer P

Component Manufacturer Serial No. E

STEAM WESTINGHOUSE 1142 6 GENERATOR STEAM ANSALDO 201 1

GENERATOR 11/2" CAP WESTINGHOUSE N/A h SCREW 11/2' CAP WESTINGHOUSE N/A SCREW

Date: 12/12/01

Sheet: 1 of 2

Unit: No.1


WORK ORDER WP&IR DESCRIPTION 01-008137 M-RCS-367 S.G. "B" RCS CUT OUT

AND WELD

01-008133 M-RCS-361 S.G. "B" RCS NOZZLE PREP

1 Name: REACTOR COOLANT

-d. ,No Add. Code Case: N/A

Replacements: 1989, No Add. Code Case: N-416-2

and Replacement Components:

Jational Other Year Repaired, ASMIE Board Identification Built Replaced, Code 0o. or Stamped

Replacement Yes/No

8-29 NONE 1970 REPAIRED YES

50 QADC 00376 2000 REPLACEMENT YES

N/A HT# 8000913, N/A REPLACEMENT NO HT CODE RVP

VA HT 204394, N/A REPLACEMENT NO HT CODE SAZ

7. Description of Work: THE EXISTING WESTINGHOUSE LOWER ASSEMBLY WAS SEVERED FROM

REACTOR COOLANT PIPING. A NEW LOWER ASSEMBLY WAS PREPARED, INSTALLED, AND

CONNECTED TO THE REACTOR COOLANT PIPING BY WELDING.

8. Tests Conducted: Hydrostatic E] Pneumatic E] Nominal Operating Pressure [ Exempt El

Other: E] Pressure: 2240 psi Test Temp: 551 .1F

* NOTE: The Primary Side Hydrotest was conducted at NOP per Code Case N-416- 2

Page 1 of 2

Date: 12/12/01

Name of Component: REACTOR COOLANT

Work Order Number: 01-008137, 01-008133



conforms to the rules of the ASME Code, Section Xl repair or replacement.



Signed: A /4t-/ P4.r &- '_

Expiration Date N/A

Date 1!ý/ 7 /

Owner or Owner's Designee, I tle




Hartford, CT have inspected the components described in this Owner's Report during the period 05/-0- I

to P , and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions AA Ill'S'2dIJ; G"-s P'V(- Y..iA

Ins p(ýsSig nature National Board, State, Province, and Endorsements

Date: 200(


Continuation Sheet

Page 2 of 2




3.

4.

5.

6.

Date: 12/12/01

Sheet: 1of 4

Unit: No.1

Work Order# : SEE BELOW

WORK ORDER WP&IR DESCRIPTION 01-013376 M-LLR-313 Replace Upper Col.

Adapters and Reshim Lower Lateral Restraint


Identification of System: 36 Class: 1 Name: "A" Col. Adapter Plates and Lower Lateral Shims

(a) Applicable Construction Code: USAS B31.1, 1967 Ed. ,No Add. Code Case: N/A

(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1989, No Add. Code Case: N/A





7. Description of Work: Replaced steam generator support upper column adapters and removed and restored

lower lateral suDport bumper guides to the steam generator and shimmed the adiacent support bumper steel.

Exempt Z

OF

Page 1 of 4

8. Tests Conducted: Hydrostatic [] Pneumatic E] Nominal Operating Pressure El

Other: [] Pressure: psi Test Temp

Date: 12/12/01

Name of Component: "A" Upper Col. Adapter Plates and Reshim Lower Lateral Restraint.



We certify that the statements made in the report are correct and this repair and replacement conforms to the rules of the ASME Code, Section Xl repair or replacement.



Signed: . - ,, eH $--V Date 4 I , Owner or Owner's Designee, Title




Hartford, CT have inspected the components described in this Owner's Report during the period C')C -/ ) -0i1

to I and state that to the best of my knowledge and belief, the Owner has performed







(Robert T. Ward) Commissions 6 ii -),,4

Inspecti_'s-gfiature National Board, State, Province, and Endorsements

Date: - Is 2001

Page 2 of 4


Continuation Sheet

Name of Component

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

Shims

V" Bolts A325

I" Bolts A325

1" Flat Washers F436-93 I" Hex. Hd. Nuts A194 Gr. 2H ¾" Lockwashers B18.21 S.G. Col. Adapter A588 S.G. Col. Adapter Pin AISI 4340 S.G. Col. Adapter Pin Washer A-588, Gr. A S.G. Col. Adapter Pin Washer Bolts A-325

Name of Manufacturer Manufacturer Serial No.

Colonial Ht. No. 264344

Colonial Ht. No. 812J3592





Colonial Ht. No. A86743


Colonial Ht. No. 2A6593A

Colonial Ht. No. T1273-A

Colonial Ht. No. I E802

Colonial Ht. No. R6759

Colonial Ht. No. R6791

Colonial Ht. No. I E542



Colonial Ht. No. B28393

Colonial Ht. No. S41165

Colonial Ht. No. 43739D

Colonial Fabricated Assembly

Colonial Ht. No. 8996496C0477

Colonial Ht. No. 803M62250

Colonial Ht. No. 255029 Trace Code I UX

National Other Board Identification. No.

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

N/A MRR 1042

N/A N/A

N/A N/A

N/A N/A

Year Built

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001

2001 I Replacement

Page 3 of 4

Repaired Replaced Or Replacement Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

Replacement

ASME Code Stamped Yes/No No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No



S.G. Adapter Col. Colonial Ht. No. 10618 N/A N/A 2001 Replacement No Adapter Bolts A- Trace No. IUU 540, Gr. B23, Cl. 2 S.G. Adapter Col. Colonial Ht. No. S42483, N/A N/A 2001 Replacement No Jam Nuts, SA307 Trace No. 1UY Gr. B

S.G. Adapter Col. Colonial Ht. No. 8994464 N/A N/A 2001 Replacement No Heavy Hex. Nut, Ht Code SBG SA 194 Gr. 2H

S.G. Col. Adapter Colonial Ht. No. 8997945 N/A N/A 2001 Replacement No Washers AISI 4150 Trace Code 1UW

%" Hex Head Bolt, Colonial 8996654 N/A N/A 2001 Replacement No

A-490

___________ I 4 4 + +

4 4 ± t t

4 4 ± ± t

4 4 + I t

+ *1� 1 T

I I [ 1 1 F

Page 4 of 4














ANCHOR/DARLING VALVE NF COMPANY

National Board No.

NA

Other ID

S1115-002

Date 11/26/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1970


REPLACEMENT

7. Description of Work OPEN FOR INSPECTION CLASS 1 SAFETY INJECTION SYSTEM 12" VALVE SI-22B AND REPLACEMENT OF 1

VALVE BONNET STUD.


Other DR Pneumatic r] Nominal Operating Pressure E




Name of

Component

SI-22B

ASME Code

Stamped

N

Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date: 11/26/2001








Signed £/ffiM geJ~g9U A &OW14 Date





have inspected the components described in the Owner's Report during the period -74 S-D 0 to / - 31-0 2-, and state that







7 i 4-1, Commissions NB7741, 1, N, IS, A WIS 100024

Inspector' Signature National Board, State, Province, and Endorsements

Date a, t- A , / - ,20 01.












Name of

Component

APRH1-IA

Name of

Manufacturer

BRYON JACKSON


681N0277

National Board No.

NA

Other ID

00127

Date 11/27/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1970

Repaired, Replaced, or

Replacement

REPAIRED

7. Description of Work INSPECT AND REBUILD CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM RESIDUAL HEAT REMOVAL PUMP 1A.


Other F

7] Pneumatic El Pressure 375 psi

Nominal Operating Pressure =l


9. Remarks NOT APPLICABLE


ASME Code

Stamped

N

Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date: 11/27/2001

Name of Component: APRH1-IA







Signed e, C.4 V .. m&Aot. ae6.ý D4ateL 20 Z





have inspected the components described in the Owner's Report during the period -1-A,-0o to /- 3 /-0Z , and state that



By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, conceming






Date / 20 e .












Name of

Component

LD-13

Name of

Manufacturer

CROSBY VALVE & GAGE CO.


NF

National

Board No.

NA

Other ID

CS014-001

Date 11/2912001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1971


REPAIRED

7. Description of Work REMOVE FOR TESTING CLASS 2 CHEMICAL AND VOLUME CONTROL SYSTEM 2" VALVE LD-13.

8. Tests conducted Hydrostatic L] Other D

Pneumatic F Nominal Operating Pressure El Pressure 84 psi Test Temp. 87 deg. F



ASME Code

Stamped

N

Exempt [:

NIS-2 (Back)

Sheet 2 of 2

Date: 11/29/2001








Signed 6k ý__.• ( y-,4- Date 4_ ! ,20 O.L OV - O DeXi Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period 1-2S-- 0 to /- 3/- 01, and state that







7 4 1 Commissions NB7741, I, N, IS, A WIS 100024

nspector'Sqnature National Board, State, Province, and Endorsements

Date / ,20 02












Date 11/29/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Repaired, ASME Name of Name of Manufacturer National Other Year Replaced, or Code

Component Manufacturer Serial No. Board No. ID Built Replacement Stamped

LD-5 CROSBY ASHTON GAGE NF NA CS109-001 1970 REPAIRED N CO.

7. Description of Work REMOVE FOR TESTING CLASS 2 CHEMICAL AND VOLUME CONTROL SYSTEM 2" VALVE LD-5.


Other F

--1 Pneumatic E Pressure 500 psi

Nominal Operating Pressure 17




Exempt 1:1

NIS-2 (Back)

Sheet 2 of 2

Date: 11/29/2001








Signed l.e/,aI £. .T-,44Q/LA Date L- 20 OQ





have inspected the components described in the Owner's Report during the period 7-,aS-0 O to /-/'-O3.- , and state that








Inspector' Signature National Board, State, Province, and Endorsements

Date 2 • .•,• / ,20 1,,-


As Required by the Provisions of the ASME Code Section Xl








5. (a) Applicable Construction Code ASME 111-1968



Date 12/4/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA



CROSBY, ASHTON GAGE NF COMPANY

National Board No.

NA

Other Year ID Built

RCOO8-001 1972 REPLAL�M�N N

��p�I1-�u,Repaired, Replaced, or

Replacement

7. Description of Work REMOVE CLASS 1 REACTOR COOLANT SYSTEM 6" VALVE PR-3A FOR TESTING AND REPLACING DICS INSERT.


Other ElEl Pneumatic F

Pressure 2240 psi

Nominal Operating Pressure E

Test Temp. 5_1 deg. F



Name of

Component

PR-3A

Code Stamped

Exempt [-1

REPLACEME=NT NRC008-001 1972

NIS-2 (Back)

Sheet 2 of 2

Date: . 12/4/2001

Name of Component: PR-3A







Signed _____, ______________ Date • g 20 0-1





have inspected the components described in the Owner's Report during the period -7-"2S-oO to /- ,/-0,Z , and state that







4 = "Commissions NB7741, I, N, IS, A WIS 100024


Date ,20 O












Name of

Component

AFW-4B

Name of

Manufacturer

WILLIAM POWELL CO.


61208

National Board No.

NA

Other ID

F015-002

Date 12/20/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1972


REPAIRED

7. Description of Work REPAIR CLASS 2 AUXILARY FEEDWATER SYSTEM 3" VALVE AFW-4B DUE TO IMPROPER SEATING.


Other D]LI Pneumatic F Nominal Operating Pressure F]




ASME Code

Stamped

N

Exempt 1

N

NIS-2 (Back)

Sheet 2 of 2

Date: .12/20/2001

Name of Component: AFW-4B







Signed Date •'o ,20 _._20 _





have inspected the components described in the Owner's Report during the period I-•,• 00 to ,/-,/9•2 , and state that







ln "Commissions NB7741, I, N, IS, A WIS 100024


Date t ,20 6-.













WILLIAM POWELL CO.


NF

National

Board No.

NA

Other

ID

FO15-001

Date 12/20/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1972


REPAIRED

7. Description of Work REPAIR CLASS 2 AUXILIARY FEEDWATER SYSTEM 3" VALVE AFW-4A DUE TO IMPROPER SEATING.

8. Tests conducted Hydrostatic [

Other D

Pneumatic Nominal Operating Pressure =V




Name of

Component

AFW-4A

ASME Code

Stamped

N

Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date: •12/20/2001

Name of Component: AFW-4A







Signed PXfluO-A.l 1Z n Ou -v Date 2 0,20





have inspected the components described in the Owner's Report during the period 9÷S'• 00 to / -3/OV , and state that








Inspector'signature National Board, State, Province, and Endorsements

Date f -/ ,20 1PZ












Name of

Component

ICS-2B

Name of

Manufacturer

CRANE VALVE CO.


NF

National Board No.

NA

Date 12/3/2001

Sheet I of 2

Unit No. 1


Type Code Sym. Stamp N__A


Expiration Date NA

Code Case NA

Other Year ID Built

ICS002-002 1970



REPAIRED N

7. Description of Work OPEN FOR MAINTAENANCE CLASS 2 INTERNAL CONTAINMENT SPRAY 8" VALVE ICS-2B.

8. Tests conducted Hydrostatic E

Other RI

Pneumatic r- Nominal Operating Pressure FX

Pressure 30 psi Test Temp. 70.4 deg. F



ASME Code

Stamped

Exempt 1"1

REPAIRED N

NIS-2 (Back)

Sheet 2 of 2

Date: 12/3/2001

Name of Component: ICS-2B




ASME Code Section XL. Repair or Replacement



Signed / / 4 'f,0Jfl- Date ,20 02





have inspected the components described in the Owner's Report during the period '7--2S-9 to /-3/ -02, and state that








Inspectors Signature National Board, State, Province, and Endorsements

Date / 20 _.___,20_












Name of

Component

ICS-2A

Name of

Manufacturer

CRANE VALVE CO.


NF

National Board No.

NA

Date 12/3/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N__AA


Expiration Date NA

Code Case NA

Other Year

ID Built

ICS002-001 1970


REPAIRED

7. Description of Work OPEN FOR MAINTENANCE CLASS 2 INTERNAL CONTAINMENT SPRAY 8" VALVE ICS-2B.


Other D--1-1 Pneumatic 1:1 Nominal Operating Pressure IE

Pressure 30 psi Test Temp. 70.4 deg. F



ASME Code

Stamped

N

Exempt 1

NIS-2 (Back) Sheet 2 of 2

Date: 12/3/2001

Name of Component: ICS-2A







Signed _.D ••e•J L.'i 20 0 _





have inspected the components described in the Owner's Report during the period '7-;,'5-' 0 to I-3 / -V2 , and state that







ie, -7 .Commissions NB7741, I, N, IS, A WIS 100024

U p oiorsSignature National Board, State, Province, and Endorsements

Da te- .20 01










(b) Applicable Edition of Section Xl Utilized for Repairs or Replacements 1989


Name of Component

RHR-400B


CRANE COMPANY


NA

National Board No.

NA

Date 1/14/2002

Sheet 1 of 2

Unit No. I


Type Code Sym. Stamp NA..


Expiration Date NA

Code Case NA

Other Year ID Built

ICS006-006 1970



REPAIRED

7. Description of Work OPEN FOR MAINTENANCE CLASS 2 INTERNAL CONTAINMENT SPRAY 6" VALVE RHR-400B DUE TO POSSIBLE

DISC TO SEAT GALLING.


Other

Pneumatic Nominal Operating Pressure rl




ASME Code

Stamped

N

Exempt r-1

NIS-2 (Back)

Sheet 2 of 2

Date: 1/14/2002





ASME Code Section Xi. Repair or Replacement



Signed f, Date6MAAAM,20 •





have inspected the components described in the Owner's Report during the period I-2S'CD 0 to /J/,OZ , and state that







;,2 s 7 a44 • Commissions NB7741, I, N, IS, A WIS 100024

(5 p 5iature National Board, State, Province, and Endorsements

Date ,20 #-1-_













Name of Component

RHR-400A


CRANE COMPANY


NF

National Board No.

NA

Date 12/20/2001

Sheet I of 2

Unit No. 1




Expiration Date NNA

Code Case NA

Other Year ID Built

1C5006-005 1970 REPAIRED N

Kepalrea,Repaired, Replaced, or

Replacement

7. Description of Work OPEN FOR MAINTENENCE CLASS 2 INTERNAL CONTAINMENT SPRAY SYSTEM 6" VALVE RHR-400A DUE TO

POSSIBLE DISC TO SEAT GALLING.

8. Tests conducted Hydrostatic Dl Other F

Pneumatic Nominal Operating Pressure r7




Code Stamped

Exempt F

REPAIRED NICS006-005 1970

NIS-2 (Back)

Sheet 2 of 2

Date: 12/20/2001

Name of Component: RHR-400A







Signed Date < 20 0A





have inspected the components described in the Owner's Report during the period '7-1S"-00 to /-$1-t2,, and state that


in this Owners Report in accordance with the requirements of the ASME Code, Section XL.






pectors Signature National Board, State, Province, and Endorsements

Date / 20 J0












Name of Component

ICS-5B


CRANE VALVE CO.


NF

National Board No.

NA

Date 11/9/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp NAA


Expiration Date NA

Code Case NA

Other Year

ID Built

ICS006-003 1970


REPAIRED

7. Description of Work OPEN FOR REPAIR CLASS 2 CONTAINMENT SPRAY SYSTEM 6" VALVE ICS-5B DUE TO DISC TO SEAT GALLING.


Other DD- Pneumatic

Pressure

D Nominal Operating Pressure n

280 psi Test Temp. 75 deg. F



ASME Code

Stamped

N

Exempt F

NIS-2 (Back)

Sheet 2 of 2

Date:. 11/9/2001



,20 6






Signed A &Q lT'/c,2*. A•A•h acW•U t Date 4 ,20 0.1





have inspected the components described in the Owners Report during the period 7_-_'_o to I/-'S-, and state that







w o--: Commissions NB7741, I, N, IS, A WIS 100024

National Board, State, Province, and Endorsements

SInspector's iignature












Name of

Component

ICS-6B

Name of

Manufacturer

CRANE VALVE CO.


NF

National

Board No.

NA

Date 11/9/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Other Year ID Built

ICS006-004 1970


REPAIRED

7. Description of Work OPEN FOR MAINTENANCE CLASS 2 CONTAINMENT SPRAY SYSTEM 6" VALVE ICS-6B DUE TO DISC TO SEAT GALLING.


Other ElEl Pneumatic Nominal Operating Pressure I•

Pressure 280 psi Test Temp. Z5 deg. F



ASME Code

Stamped

N

Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date: 11/9/2001








Signed eI "a, &JV.AnJ AAJ Date l i ,20 0O.1 Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period '7- 2Y-,0 to /-JI/-0 X, and state that







S44 ,Commissions NB7741, I, N, IS, A WIS 100024

Date ,20 60.1

National Board, State, Province, and EndorsementsV Inspector's 11gnature












Name of

Component

SI-304A

Name of

Manufacturer



NF

National Board No.

NA

Other ID

SI116-005

Date 9/7/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Year Built

1967


REPAIRED

7. Description of Work TORQUE BOLTING ON CLASS 1 SAFETY INJECTION SYSTEM 6" VALVE SI-304A DUE TO EVIDENCE OF LEAKAGE.


Other --

F Pneumatic

Pressure

D Nominal Operating Pressure

0 psi Test Temp.

1:1 Exempt El

0 deg. F



ASME Code

Stamped

N

NIS-2 (Back)

Sheet 2 of 2

Date: 9/7/2001



Da tetej 20 ~






Signed Date 20 C.





have inspected the components described in the Owner's Report during the period 7t.4"O to /-3/-#;L , and state that







A ?-3" 7~t",Commissions NB7741, 1, N, IS, A WIS 100024

National Board, State, Province, and EndorsementsI" Inspecr's Signature












Name of

Manufacturer

GRINNELL FIRE PROTECTION SYSTEMS


NF

National

Board No.

NA

Date 8/20/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Other Year ID Built

CS033-005 1973


REPAIRED

7. Description of Work TORQUE BOLTING ON CLASS 2 CHEMICAL AND VOLUME CONTROL SYSTEM 3" VALVE CVC-4C DUE TO BODY TO BONNET LEAK.


Other F

1I- Pneumatic

Pressure

L] Nominal Operating Pressure El

23 psi Test Temp. 11_5 deg. F



Name of

Component

CVC-4C

ASME Code

Stamped

N

Exempt El

NIS-2 (Back)

Sheet 2 of 2

Date: 8/20/2001

Name of Component: CVC-4C







Signed 1CA AAX.L.A ,7T- t CJ* Date 20 6,20





have inspected the components described in the Owner's Report during the period 74--'O0 to /-3/-D2- , and state that








Inspectors Signature National Board, State, Province, and Endorsements

Date 20 O;












Name of

Component

RHR-100B


CRANE VALVE CO.


NF

National

Board No.

NA

Date 11/21/2001

Sheet 1 of 2

Unit No. 1


Type Code Sym. Stamp N A


Expiration Date NA

Code Case NA

Other Year

ID Built

AC010-008 1972

Repaired,


REPAIRED

7. Description of Work OPEN FOR REPAIR CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 8" VALVE RHR-100B.


Other DPneumatic 1 Nominal Operating Pressure El




ASME Code

Stamped

N

Exempt LI

NIS-2 (Back)

Sheet 2 of 2

Date: .11/21/2001



Date / 20 2






Signed __.JA CA)Jt Date .20 0 ca,





have inspected the components described in the Owner's Report during the period 74So-' to 3/ 1'- 2-, and state that








National Board, State, Province, and Endorsementsa.nspector's'gnature












Name of

Component

RHR-100A

Name of

Manufacturer

CRANE VALVE COMPANY


NF

National Board No.

NA

Date 11/27/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NA

Other Year

ID Built

AC010-007 1972


REPAIRED

7. Description of Work REPAIR CLASS 2 RESIDUAL HEAT REMOVAL SYSTEM 8" VALVE RHR-100A.


Other 1:

LII Pneumatic

Pressure 340 psi

Nominal Operating Pressure L




ASME Code

Stamped

N

Exempt 1

NIS-2 (Back)

Sheet 2 of 2

Date: .11/27/2001

Name of Component: RHR-100A







Signed 1k: •W A 0LN 111. flh1, Date 20 0.__





have inspected the components described in the Owner's Report during the period '7-;S'00 to I 3/'-0Z, and state that







A ý nCommissions NB7741, I, N, IS, A WIS 100024

Inspe or's Signature National Board, State, Province, and Endorsements

Date - ••. 20 -0












Name of

Manufacturer

AJAX IRON WORKS


6577

National Board No.

NA

Other ID

00077

Date 9/5/2001

Sheet 1 of 2

Unit No. 1




Expiration Date NA

Code Case NNA

Year Built

1967


REPAIRED

7. Description of Work REPAIR CLASS 2 CHEMICAL AND VOLUME CONTROL SYSTEM CHARGING PUMP 1C (SUCTION VALVE REPAIR).


Other R

Pneumatic 1: Nominal Operating Pressure El


9. Remarks NOT APPLICABLE


Name of

Component

APCH-1C

ASME Code

Stamped

N

Exempt El

NIS-2 (Back)

Sheet 2 of 2

Date: 9/5/2001

Name of Component: APCH-1C







Signed " e•. 640-•pao• Date • ,20 0 Owner or Owner's Designee, Title




have inspected the components described in the Owner's Report during the period 1- 2r-0 0 to /__3_-_ 2_, and state that







lns Jtr Commissions NB7741, I, N, IS, A WIS 100024


Date / 20 0 ,

Documents

Kewaunee Nuclear Power Plant Point Beach Nuclear Plant NM C · Kewaunee Nuclear Power Plant Point Beach Nuclear Plant N490 Highway 42 6610 Nuclear Road Kewaunee, Wl 54216-9511 Two