Touch Screen Shredders“Touch Screen” ENERGYSMART High Security shredder

Manufacturer: ELCOMAN S.R.L.Brand: KOBRAModel: KOBRA 270 TS HSArticle code:

Kobra 270 TS HS: 99.850E/SKobra 270 TS HS + Automatic Oiler 99.850E/S +58474Kobra 270 TS HS + Metal detector 99.850E/S +58484Kobra 270 TS HS + Metal detector + Automatic Oiler 99.850E/S +58494

KOBRA 270 TS HSThroat width: 270 mmSecurity Level DIN 32757: 5Shred size: 0,8x9,5 mm. cross cutSheet capacity (A4/70 gr. paper)*: 8/10“ENERGY SMART” system yesSpeed: 0,07 m./sec.Noise level (idle/shredding): 54/55 dbaVoltage: 230 VoltPower: 460 WattWaste bag volume: 110 litersDimensions (WxDxH): 53x43x88 cm.Weight: 47 Kg.

High security “Touch Screen” Office shredder• Suitable to shred “Classified” and “Top secret” documents• Shreds up to 10 sheets of paper (A4 70 gr.) at a time (cross cut rated capacity with lubricated cutting knives)• Touch Screen Panel• “EPC - Electronic Power Control“ System: shows the shredding load required to optimise shredding without jams• “ENERGY SMART®” power saving system: machine goes into power saving stand-by mode after just 8

seconds and switches off automatically after 4 hours of non-operation• “AUTOMATIC REVERSE” System in case of jamming• 24 hour continuous duty motors: no duty cycle or timed cool down periods• Heavy duty chain drive with steel gears “SUPER POTENTIAL POWER UNIT”• Carbon hardened cutting knives unaffected by staples and metal clips• New high precision design of cutting knives allows high shred loads with low power consumption• “AUTOMATIC OILING SYSTEM”: automatically lubricates cutting knives (optional)• “SHRED GUARD”– Metal Detection System: detects any type of metal which can be introduced into the

shredder and stops immediately the machine preventing any possible damage to the cutting system; anilluminated optical indicator warns the operator of the presence of the metal (optional)

Touch Screen PanelJust touch the controls to activate the machinefunctions. Keep your finger on the “Forward”control for 5 seconds and the machine functionscontinuously for 30 seconds when transparentmaterial needs to be shredded. A light comes onwhen the blades need to be oiled.

“AUTOMATIC REVERSE” SystemSpecial system which detects the thickness ofthe paper entering the shredder andautomatically rejects the excess material.

“SHRED GUARD” - Metal Detection SystemWarns when metal objects of any size areaccidentally inserted into the entry opening andstops the machine before they reach the cuttingknives in order to protect the knives (optional).“AUTOMATIC OILER”Built-in Automatic Oiling system. Eliminates theneed for manual oiling of cutting knives.

* Capacity may vary on power supply, paper quality and lubrication of cutting knives MADE IN ITALY