Kodak Easyshare c315 c530 Cd50

© Eastman Kodak Company, 2005

ConfidentialRestricted Information

{ServiceManual}{Production}{KodakServiceSupport}{ExternalAndInternal}

Publication No. SM1132-111NOV05

SERVICE MANUALfor

Kodak EasyShare C315 DIGITAL CAMERAService Code: 1132

Kodak EasyShare C530 DIGITAL CAMERAService Code: 1398

Kodak EasyShare CD50 DIGITAL CAMERAService Code: 1133

ImportantQualified service personnel must repair this equipment.

2 11NOV05 – SM1132-1

PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the subject matter gained by Eastman Kodak Company prior to publication.

No patent license is granted by this information.

Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or special damages, resulting from any use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.

This equipment includes parts and assemblies sensitive to damage from electrostaticdischarge. Use caution to prevent damage during all service procedures.

Description Page

Table of Contents

Illustrated Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Necessary Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Configurations for the CAMERA DOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Reference Table for New CAMERAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Reference Table for Adjustment Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Visual Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Equipment Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

COVER AYs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10SHUTTER BOARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12MONITOR LCD AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13MCU BOARD/LENS AY and POWER BOARD/FRAME AY . . . . . . . . . . . . . . . 14

Alphabetical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16E00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16E20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16MONITOR LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16STROBE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17MEMORY CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19General Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Diagnostic Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Low Voltage Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Checking the Power On “Self Test” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Checking for Uniform Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Checking “Wide IQ Chart w/o Flash” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Checking “Wide IQ Chart with Flash” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Checkout Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Checking the General Functions of the CAMERA . . . . . . . . . . . . . . . . . . . . . . . 27Checking the Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Checking the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Checking the External Components of the CAMERA . . . . . . . . . . . . . . . . . . . . 32

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33MASTER CAMERA - “Calibration of the MASTER CAMERA”. . . . . . . . . . . . . . . . . . 33CCD - “AWB/ ISO/DBP” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SM1132-1 – 11NOV05 3

MCU BOARD/LENS AY - “Shutter Delay” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Replacements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Additional Service Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Downloading the Files from the Partner Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Installing the Altek Vista SERVICE SOFTWARE on the Computer . . . . . . . . . . . . . . 42Doing the Configuration of the SERVICE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . 49Connecting to the SERVICE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Making the MEMORY CARDS for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Making the “Master Camera” MEMORY CARDS . . . . . . . . . . . . . . . . . . . . . . . . 54Making the “Self Test” MEMORY CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Making the “Shutter Delay” MEMORY CARDS . . . . . . . . . . . . . . . . . . . . . . . . . 57Making the “AWB/ISO/DBP” MEMORY CARDS . . . . . . . . . . . . . . . . . . . . . . . . 58

Doing a Calibration of the Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Setting up the LIGHT BOX - “Light Box Calibration (LV10.0)” . . . . . . . . . . . . . . 59

Downloading the Firmware for the First Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Upgrading the Firmware Using the MEMORY CARD. . . . . . . . . . . . . . . . . . . . . . . . . 62Upgrading the Firmware Using the Internal Memory . . . . . . . . . . . . . . . . . . . . . . . . . 63Checking the ACTUATION, FLASH, POWER-ON COUNTERS and Serial Number . 64

Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

MCU BOARD/LENS AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66MODE DIAL CIRCUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73POWER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74SHUTTER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Component Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78MCU BOARD/LENS AY - 1 of 2, Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78MCU BOARD/LENS AY - 2 of 2, Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79MODE DIAL CIRCUIT - 1 of 2, Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80MODE DIAL CIRCUIT - 2 of 2, Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80POWER BOARD - 1 of 2, Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81POWER BOARD - 2 of 2, Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82SHUTTER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Publication History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

SERVICE MANUAL

4 11NOV05 – SM1132-1

Section 1: Illustrated Parts List

Necessary Materials

Primary Tools

Description Part No.

ESD MAT Region Provided

TWEEZERS Region Provided

SOLDER REMOVAL TOOL Region Provided

FLASH CAPACITOR DISCHARGE TOOL - resistor minimum, 1.2 kW TL-5336

DIGITAL VOLTMETER TL-4114

LIGHT BOX - Arrowin LBF, 2001 -------

DC POWER SUPPLY - 0 - 12 V, 5.0 A with clip leads, ez or alligator Region Provided

TRIPOD - Bogen, Model 3021s TL-5176

TRIPOD HEAD - Bogen, Model 3047 TL-5206

OPTRONICS PHOTOMETER/DETECTOR - Graseby -------

COLOR TEMPERATURE METER - Gossen Color Pro 3F, or equivalent -------

AIR HOSE - optional Region Provided

Computer:• Microsoft Windows XP OPERATING SYSTEM

• IBM COMPUTER or IBM compatible with a Pentium PROCESSOR, 233 MHz or higher

• 128 MB RAM for Windows XP

• 200 MB hard disk space

• CD-ROM DRIVE

• USB PORT

• 21-in. color MONITOR

• 24-bit XGA VIDEO CARD

• Color VIDEO MONITOR

Region Provided

FEEDBACK SOFTWARE Region Provided

Kodak LENS CLEANING PAPER Region Provided

Kodak LENS CLEANER 1C8000

COVER CLEANER - Johnson SHINE-UP FURNITURE WAX TL-5182

LAMP - Arrowin LBF, 2001 light box, EVC/FGX, Phillips, 6958 Region Provided

FLASH METER TL-5205

STATION - Weller, soldering, 50 W TL-5412

TIP - soldering iron, standard ST1 TL-5413

TIP - soldering iron, single flat ST5 TL-5414

TIP - soldering iron, conical ST7 TL-5415

SCREWDRIVER - Milwaukee, cordless, with battery and charger, optional TL-5424

HEX ADAPTER - 0.40 mm (0.02 in.) bit, optional TL-5421

BATTERY for a POWER SCREWDRIVER - 2.4 V, optional TL-5422

BIT - power, 00 x 80 mm (3.14 in.), 4 mm (0.15 in.) drive, optional TL-5423

TWEEZERS - special TL-5338

Illustrated Parts List

SM1132-1 – 11NOV05 5

Special Tools

* This item is provided by the region.

** This file is on the Kodak Partner Web site at https://partner.kodak.com/.

*** See “Configurations for the CAMERA DOCK” on Page 6.

PAINT - 18% gray, interior, flat Region ProvidedVendor:RC Shaheen1400 St. Paul Blvd.Rochester, NY 14621Telephone: 585-266-1500MUR1597

TARGET - 18% gray TL-5845

SCREWDRIVER - Phillips, No. 00 x 40 mm (1.57 in.) TL-5429




GEN 2 CAMERA POST - optional TL-5416

GEN 2 CUSTOM TEXT FIXTURE - optional 5E8164

GEN 2 CAMERA POST FABRICATION DRAWING - optional 5E8161

GEN 2 CUSTOM TEST FIXTURE FABRICATION DRAWING - optional 5E8163


TARGET - AF compensation TL-5752

TARGET - AF passive parallax compensation TL-5689

TARGET - AF passive compensation, 0.50 m (19.7 in.) TL-5687

TARGET - AF passive compensation, 1.00 m (39.4 in.) TL-5688

BATTERY VOLTAGE ADJUSTMENT TOOL - battery simulator TL-5637

CAMERA NEST TL-5856

Kodak Ni-MH RECHARGEABLE DIGITAL CAMERA BATTERY AA - 2100 mA-hour

815 6572

Kodak Ni-MH RECHARGEABLE DIGITAL CAMERA BATTERY KAA2HR - 1850 mA-hour

114 8683

Kodak EasyShare CAMERA DOCK SERIES 3 188 6597

Kodak DOCK ADAPTER KIT D-22*** 175 6824

USB CABLE, 8-PIN, Model U-8, for Kodak EasyShare DIGITAL CAMERAS 195 5137

A/V CABLE, 8-PIN, Model AV-8, for Kodak EasyShare DIGITAL CAMERAS 811 8390

SERVICE SOFTWARE - “Altek Vista Service Software” **

Software and Firmware files - “TBM_ARES.bin” **

Kodak EasyShare SOFTWARE - Version 5.01 or higher *


SERVICE MANUAL

6 11NOV05 – SM1132-1

Configurations for the CAMERA DOCK

Note• You must use the Kodak DOCK ADAPTER KIT D-22 when connecting to the Kodak EasyShare CAMERA DOCK

6000.

– Kodak EasyShare C315 DIGITAL CAMERA

– Kodak EasyShare C530 DIGITAL CAMERA

– Kodak EasyShare CD50 DIGITAL CAMERA

• The above CAMERAS are also compatible with:

– Kodak EasyShare CAMERA DOCK SERIES 3

– other 26-PIN DOCKS

CUSTOMDOCKINSERT

CAMERADOCK6000

CUSTOMDOCKINSERT

DOCKSERIES 3DOCK ADAPTER

KIT D-22

P252_0075BAFigure 1 Figure 2

CAMERA


SM1132-1 – 11NOV05 7

Reference Table for New CAMERASUse the following catalog numbers to order a replacement CAMERA if the CAMERA is under warranty and cannot be repaired, or to order a MASTER CAMERA.

Region LanguageCatalog No.

for C315Catalog No.

for C530Catalog No.

for CD50Americas and Canada, SENSORMATIC and CHECKPOINT TAG

• English

• French

• Spanish

828 4036 173 8814 857 0830

Americas and Canada, non-OFM SENSORMATIC and CHECKPOINT TAG

• English

• French

• Spanish

141 8227 115 7528 834 8674

Brazil • Italian

• Spanish

• Portuguese

814 3315 131 1141 857 6894

Europe, Africa, and the Middle East • English

• French

• German

- - - - 831 8180 875 0887

Europe, Africa, and the Middle East • Italian

• Spanish

• Portuguese

- - - - 392 8132 392 6771

Europe, Africa, and the Middle East Nordic - - - - 392 8140 392 6763Europe, Africa, and the Middle East Emerging - - - - 392 8157 392 6755Greater China and Taiwan • English

• Chinese

– simplified

– traditional

• Korean

- - - - 869 2899 824 7496

People’s Republic of China • English

• Chinese

– simplified

– traditional

• Korean

- - - - 832 2992 108 3112

Asia Pacific and Korea • English

• Korean

• Chinese

– simplified

– traditional

- - - - 857 9419 839 0965

Americas and Canada, CLAMSHELL, with non-OFOTO MAX CHECKPOINT TAG

• English

• French

• Spanish

807 1524 TBD - - - -

Brazil, CLAMSHELL, non-OFOTO MAX • Italian

• Spanish

• Portuguese

843 0621 TBD - - - -

Japan Japanese 863 5047 863 5047 173 3799Kodak Service & Support - bulk, class A English SP843 4045 SP857 9617 SP164 4814Kodak Service & Support - retail, class A English SP828 4036 SP150 0990 SP857 0830Kodak Service & Support - bulk, class B English SP845 4811 SP157 6354 SP825 7537Kodak Service & Support - retail, class B English SP143 2475 SP881 5938 SP184 2525

SERVICE MANUAL

8 11NOV05 – SM1132-1

Reference Table for Adjustment Procedures

Component Procedure

MCU BOARD AND LENS AY • “MCU BOARD/LENS AY - “Shutter Delay”” on Page 38

• “CCD - “AWB/ ISO/DBP”” on Page 36


SM1132-1 – 11NOV05 9

Visual Index

Item Description

1 “COVER AYs” on Page 10

2 “SHUTTER BOARD” on Page 12

3 “MONITOR LCD AY” on Page 13

4 “MCU BOARD/LENS AY and POWER BOARD/FRAME AY” on Page 14

P269_1000EC

1

2

3

4

1

P269_1000ECA

SERVICE MANUAL

10 11NOV05 – SM1132-1

Equipment Parts

ImportantBefore removing the BACK COVER AY, you must:

• remove, if installed:

– MEMORY CARD

– BATTERY

• rotate the MODE DIAL to “AUTO”

Figure 1 COVER AYs

1

2

3

4

5

6

1

1

P269_1001DCA

1

2

3

4

5

6

1

1


SM1132-1 – 11NOV05 11

Figure 1 COVER AYs

Item Part No. Description Quantity Notes1 3F6412 SCREW - PH, tap, 1.7 X 3, black 1 62 3F9094 COVER AY - back, C315 1 1

3F9229 COVER AY - back, C530 1

3F9227 COVER AY - back, CD50 1

3 3F3093 COVER AY - front, C315 1 13F9228 COVER AY - front, C530 1

3F9224 COVER AY - front, CD50 1

4 3F9100 HINGE - battery cover 1 15 3F9101 SPRING - battery cover, C315 1 16 3F9099 COVER AY - battery 1 1

- - - - 3F6387 STRAP - wrist 1 1 Not visible in the graphic.- - - - 3F9105 CUSTOM INSERT - dock, C315 1 1 Not visible in the graphic.

SERVICE MANUAL

12 11NOV05 – SM1132-1

ImportantBefore removing the SHUTTER BOARD, you must remove the SOLDER from the SOLDER JOINTS.

Figure 2 SHUTTER BOARD

Figure 2 SHUTTER BOARD

Item Part No. Description Quantity Notes1 - - - - SOLDER JOINTS 2 32 3F9098 BOARD - shutter 2 1

P269_1002BC

21

P269_1002BCA

1 2


SM1132-1 – 11NOV05 13

ImportantBefore removing the MONITOR LCD and HOLDER AY, you must remove the SOLDER from the SOLDER JOINTS.

Figure 3 MONITOR LCD AY

Figure 3 MONITOR LCD AY

Item Part No. Description Quantity Notes1 3F9103 SCREW - PH, tap, 1.7 X 4, Ni 3 12 - - - - SOLDER JOINTS 3 23 3F9092 MONITOR LCD 3 14 3F9097 HOLDER AY - monitor LCD 3 1

P269_1003DC

1

2

3

4

P269_1003DCA

1

2

3

4

SERVICE MANUAL

14 11NOV05 – SM1132-1

Figure 4 MCU BOARD/LENS AY and POWER BOARD/FRAME AY

Figure 4 MCU BOARD/LENS AY and POWER BOARD/FRAME AY

Item Part No. Description Quantity Notes1 3F9103 SCREW - PH, tap, 1.7 X 4, Ni 4 22 3F9102 CABLE - FPC, 28-pin 4 13 - - - - SOLDER JOINTS 4 2 black and red wires4 3F9095 BOARD - MCU and lens ay 4 15 3F9096 BOARD - power and frame ay 4 1

- - - - 3F6205 FUSE F1 - VF, 2.5 A, 32 V 4 2 See “POWER BOARD - 1 of 2, Top” on Page 81.

- - - - 3F6205 FUSE F2 - VF, 2.5 A, 32 V 4 2 See “POWER BOARD - 2 of 2, Bottom” on Page 82.

- - - - 3F9104 FUSE F3 - VF, 2.0 A, 32 V 4 1 See “POWER BOARD - 2 of 2, Bottom” on Page 82.

- - - - 3F6204 FUSE F4 - 1.25 A, 32 V 4 1 See “POWER BOARD - 2 of 2, Bottom” on Page 82.

P269_1004DC

1

2

3

4

5

P269_1004DCA

1

2

3

4

5

Alphabetical Index

SM1132-1 – 11NOV05 15

Section 2: Alphabetical Index

Alphabetical Index

Part No. Description Figure No.3F9095 BOARD - MCU and lens ay 43F9096 BOARD - power and frame ay 43F9098 BOARD - shutter 23F9102 CABLE - FPC, 28-pin 43F9094 COVER AY - back, C315 13F9229 COVER AY - back, C530 13F9227 COVER AY - back, CD50 13F9099 COVER AY - battery 13F3093 COVER AY - front, C315 13F9228 COVER AY - front, C530 13F9224 COVER AY - front, CD50 13F9105 CUSTOM INSERT - dock, C315 13F6205 FUSE F1 - VF, 2.5 A, 32 V 43F6205 FUSE F2 - VF, 2.5 A, 32 V 43F9104 FUSE F3 - VF, 2.0 A, 32 V 43F6204 FUSE F4 - 1.25 A, 32 V 43F9100 HINGE - battery cover 13F9097 HOLDER AY - monitor LCD 33F9092 MONITOR LCD 33F6412 SCREW - PH, tap, 1.7 X 3, black 13F9103 SCREW - PH, tap, 1.7 X 4, Ni 33F9103 SCREW - PH, tap, 1.7 X 4, Ni 4

- - - - SOLDER JOINTS 3- - - - SOLDER JOINTS 2, 4

3F9101 SPRING - battery cover, C315 13F6387 STRAP - wrist 1

SERVICE MANUAL

16 11NOV05 – SM1132-1

Section 3: Diagnostics

Error Codes

E00

E20

Troubleshooting

LEDs

MONITOR LCD

Description Recommended Action

A communication error occurred between the MCU and the 16-BIT MAIN CPU.

Do “Upgrading the Firmware Using the MEMORY CARD” on Page 62.


An error occurred when the CAMERA was writing to the NANDFLASH memory.

Do “Upgrading the Firmware Using the MEMORY CARD” on Page 62.


The red VIEWFINDER LED is blinking. 1. Install a new BATTERY.

2. Check the BATTERY CONTACTS.

3. Install a new BATTERY DOOR AY.


The MONITOR LCD does not energize. 1. Check:

• CAMERA energizes

• CABLE to the MONITOR LCD has a correct and tight connection

• MCU BOARD/LENS AY has no damage

• MONITOR LCD has no damage

2. Install:

• new MONITOR LCD

• new MCU BOARD/LENS AY

The MONITOR LCD energizes, but the screen is blank. 1. Check the FPC from the MONITOR LCD to CONNECTOR J1 on the MCU BOARD.

2. Install:

• new MONITOR LCD

• new MCU BOARD/LENS AY

Malfunction of pixels occurs on the MONITOR LCD. Install a new MONITOR LCD.

Diagnostics

SM1132-1 – 11NOV05 17

STROBE

Horizontal or vertical lines display on the MONITOR LCD.

1. Check:

• FPC from the MONITOR LCD to CONNECTOR J1 on the MCU BOARD

• MCU BOARD/LENS AY has no damage

2. Install:

• new MONITOR LCD

• MCU BOARD/LENS AY


The STROBE does not energize. 1. Check that the correct mode of the STROBE is selected.

2. Measure the voltage of the STROBE CAPACITOR across both ends of the LAMP. The voltage should be > 280 V.

3. Check:

• FUSE F4 on the POWER BOARD

• COIL and PLATE for the TRIGGER is soldered correctly

The STROBE operates in the “Fill Flash” mode, but does not operate in the “Auto Flash” mode.

Check the brightness of the environment.

Smoke emits from the CAMERA when the STROBE is actuated.

Check:• connection of the red and black wires between the

STROBE AY and the POWER FRAME AY

• STROBE COVER or STROBE REFLECTOR AY has no debris

The LAMP for the STROBE is dark. Do a replacement of the CAMERA.


SERVICE MANUAL

18 11NOV05 – SM1132-1

MEMORY CARD

Power


The CAMERA does not recognize the MEMORY CARD. 1. Use a new MEMORY CARD.

2. Check:

• “IMAGE STORAGE” option is set to “AUTO”

• SOCKET of the MEMORY CARD on the MCU BOARD/LENS AY has no damage

3. Do “Upgrading the Firmware Using the Internal Memory” on Page 63.

Images are not stored on MEMORY CARD. 1. Use a new MEMORY CARD.

2. Check:

• position of the WRITE PROTECT SWITCH on the SD CARD

• “IMAGE STORAGE” option is set to “AUTO”

• SOCKET of the MEMORY CARD on the MCU BOARD/LENS AY has no damage

3. Format the MEMORY CARD and capture an image again.

4. Do “Upgrading the Firmware Using the Internal Memory” on Page 63.


The CAMERA does not energize. 1. Check:

• power source for the CAMERA

• FUSE F1 and F2 on the POWER BOARD. If open, install a new FUSE.

• BOARD-TO-BOARD CONNECTOR JP1 on the MCU BOARD/LENS AY to J3 on the POWER BOARD

2. Diagnose the MODULE that has the malfunction.

• Disconnect all MODULES from the MODE DIAL BOARD.

• Connect the MODULES one at a time, until the FUSE opens.

3. Install a new:

• MODE DIAL BOARD

• POWER BOARD


The CAMERA with no BATTERY does not operate on the CAMERA DOCK.

1. Check the DOCK CONNECTOR on the CAMERA.

2. Install a new MCU BOARD/LENS AY.

Diagnostics

SM1132-1 – 11NOV05 19

Image Quality

Communication


The images are black. 1. Check:

• BOARD-TO-BOARD CONNECTOR J1 on the MCU BOARD/LENS AY to J3 on the POWER BOARD

• FPC

• any sound from the SHUTTER


• The image is not in focus.

• The color of the image is not correct.

• The images are too light.

• The images are too dark.

• The images have pixels that are continually energized.

• The captured image is other than the image displayed on the VIEWFINDER AY.

Install a new MCU BOARD/LENS AY.


The CAMERA does not download images from the USB PORT.

1. Connect the CAMERA to the computer to check for communication.

2. Check for damage on:

• USB CONNECTOR to the PINS on the J3 on the MCU BOARD

• BOARD-TO-BOARD CONNECTOR J1 on the MCU BOARD/LENS AY to J3 on the POWER BOARD


SERVICE MANUAL

20 11NOV05 – SM1132-1

General Functions


One or more do not operate correctly:• “menu” BUTTON

• FLASH BUTTON

• “share” BUTTON

• “delete” BUTTON

• “review” BUTTON

• 4-WAY BUTTON

• “OK” BUTTON

1. Check for damage to:

• BUTTONS

• inside the BACK COVER AY

2. Install a new:

• BACK COVER AY


The SHUTTER BUTTON does not operate correctly. 1. Check the connection of the SHUTTER BOARD to the MCU BOARD/LENS AY.

2. Install a new:

• SHUTTER BOARD


The SELF-TIMER LED does not operate correctly. Check the connection of the red and black wires from the SELF-TIMER LED to the MCU BOARD/LENS AY.

Diagnostics

SM1132-1 – 11NOV05 21

Diagnostic Tests

Low Voltage Test[1] Connect the DIGITAL MULTIMETER TL-4114 to the BATTERY VOLTAGE ADJUSTMENT TOOL TL-5637:

[2] Energize the DIGITAL MULTIMETER.

[3] Set the DIGITAL MULTIMETER to 2.6 V.

[4] Install the CAMERA on the BATTERY VOLTAGE ADJUSTMENT TOOL.

[5] Set the SWITCHES on the BATTERY VOLTAGE ADJUSTMENT TOOL to:

• “2.6 V”

• “ON”

[6] Energize the CAMERA.

[7] Set the CAMERA to the “Fill Flash” mode.

[8] Press the SHUTTER BUTTON.

[9] Check:

• STROBE actuates

• image displays correctly

• low “Battery” icon displays

Note If the results are not within specification:

• red VIEWFINDER LED blinks

• “Battery” icon blinks

• error code displays

[10] Delete the image.

[11] De-energize the CAMERA.

Wire Color From the DIGITAL MULTIMETER:To the BATTERY VOLTAGE

ADJUSTMENT TOOL

Red “+” “2.6 V”

Black Ground Ground

SERVICE MANUAL

22 11NOV05 – SM1132-1

Checking the Power On “Self Test”[1] Do Making the “Self Test” MEMORY CARDS on Page 56.

[2] Insert the correct MEMORY CARD in the CAMERA:

[3] Do either:

• Install the CAMERA on the CAMERA DOCK.

• Insert a BATTERY that has a full charge into the CAMERA.

[4] Energize the CAMERA to execute the test.

[5] If the MONITOR LCD displays “Date and time have been reset”, select “CANCEL”.

[6] For each test displaying on the MONITOR LCD, check:

[7] When the test is completed, de-energize the CAMERA.

[8] Remove the MEMORY CARD.

CAMERA MEMORY CARD

EasyShare C315 DIGITAL CAMERA “C315 Self Test”

EasyShare C530 DIGITAL CAMERA “C530 Self Test”

EasyShare CD50 DIGITAL CAMERA “CD50 Self Test”

Test Check:

“F/W: n.nnnn” version of firmware

“RGB Level Checking...” quality of the 6 colors

“Gray Level Checking...” quality of the 6 gray areas

“LEDs On/Off testing” • green LED on the front of the CAMERA illuminates

• red and green LEDs on the back of the CAMERA illuminate

“LCD On/Off testing” MONITOR LCD blinks

“Strobe testing” STROBE energizes once

“SDRAM testing” • “SDRAM OK”

• “IDRAM OK”

• “SD Card OK”

• “NAND Flash OK”

“IDRAM testing”

“SD card testing”

“NAND flash testing”

“Temperature checking...” message “OK”

“LCD Bad pixel testing” MONITOR LCD for:• dark pixels in the white screen

• white pixels in the dark screen

Diagnostics

SM1132-1 – 11NOV05 23

Checking for Uniform Flash

Important• A dark room or the GEN 2 CUSTOM TEST FIXTURE can be used.

• The distance is measured from the surface of the TARGET to the front of the LENS.

[1] If using:

[2] Install the CAMERA on the CAMERA NEST.

[3] Connect to the CAMERA:

• AC ADAPTER

• USB CABLE

[4] Do Step 1 - Step 10 of “Connecting to the SERVICE SOFTWARE” on Page 52.

Dark Room GEN 2 CUSTOM TEST FIXTURE with Controlled Light

Place the TARGET 1 m (39.4 in.) from the front surface of the CAMERA.

Place the TARGET in SLOT 5.

SERVICE MANUAL

24 11NOV05 – SM1132-1

[5] Select “Flash Uniformity”.

[6] Click [OK].

[7] Check the mark on the computer screen.

[8] Close “Flash Uniformity” window.

[9] Continue with Checking “Wide IQ Chart w/o Flash” on Page 25.

Green “✓ ” Red “X”

• The test was successful.

• Continue with Step 8.

• A failure occurred.

• De-energize the CAMERA.

• Do “Checking for Uniform Flash” on Page 23 again.

• If the failure occurs again, check the hardware.

Diagnostics

SM1132-1 – 11NOV05 25

Checking “Wide IQ Chart w/o Flash”

[1] Select “Wide IQ Chart w/o Flash”.

[2] Click [OK].

[3] Click [OK].

[4] Continue with “Checking “Wide IQ Chart with Flash”” on Page 26.

SERVICE MANUAL

26 11NOV05 – SM1132-1

Checking “Wide IQ Chart with Flash”

[1] Select “Wide IQ Chart with Flash”.

[2] Click [OK].

[3] Click [OK].

[4] Close:

• “Menu for service” window

• “VISTA for SERVICE (Kodak)” window


Diagnostics

SM1132-1 – 11NOV05 27

Checkout Procedures

Checking the General Functions of the CAMERA

ImportantDo these procedures before returning the CAMERA to the customer.

[1] Install the 5 V AC ADAPTER to:

• CAMERA DOCK

• source of power

[2] Connect the CAMERA DOCK to the computer with the USB CABLE.

[3] Remove the BATTERY from CAMERA.

[4] Install the CAMERA on the CAMERA DOCK. See “Configurations for the CAMERA DOCK” on Page 6.

[5] Check that the STATUS LED on the CAMERA DOCK illuminates green.

[6] Remove the CAMERA from the CAMERA DOCK.

[7] Install:

• CRV3 BATTERY in the CAMERA

• CAMERA on the CAMERA DOCK

[8] Check:

• none of the LEDs for the BATTERY on the CAMERA DOCK illuminate green

• STATUS LED on the CAMERA DOCK illuminates green

[9] Remove:

• CAMERA from the CAMERA DOCK

• CRV3 BATTERY from CAMERA

[10] Install:

• Ni-MH BATTERY in the CAMERA

• CAMERA on the CAMERA DOCK

[11] Check:

• one or more of the LEDs for the BATTERY on the CAMERA DOCK illuminate green

• STATUS LED on the CAMERA DOCK illuminates green



[14] Check that the CAMERA energizes.


[16] Remove the BATTERY from the CAMERA.

[17] Insert the MEMORY CARD into the CAMERA.

[18] Install the CAMERA on the CAMERA DOCK. See “Configurations for the CAMERA DOCK” on Page 6.

[19] Rotate the MODE DIAL to the “AUTO” position.

[20] Check the energize sequence:

• green LED illuminates on the CAMERA DOCK

• green LED to the right of the VIEWFINDER

– blinks 2 times

– remains illuminated

• error code does not display



SERVICE MANUAL

28 11NOV05 – SM1132-1

[23] Install a new BATTERY that has a full charge into the CAMERA.

[24] Rotate the MODE DIAL to the “AUTO” position.

[25] Check the energize sequence:

• green LED to the right of the VIEWFINDER:

– blinks 2 times

– remains illuminated

• error code does not display

[26] Check the following BUTTONS and SWITCHES:

BUTTON/SWITCH Do:

• “menu”

• 4-WAY

• “OK”

1. Press the “menu” BUTTON.

2. Check that the MONITOR LCD illuminates.

3. Press:

• 4-WAY BUTTON up or down to move through the menu

• “OK” BUTTON to select an option

• “OK” BUTTON again to return to the screen before

• “menu” BUTTON to quit

4. Press:

• “menu” BUTTON

• SHUTTER BUTTON

5. Check:

• CAMERA quits the menu

• image is captured

• image displays on the MONITOR LCD

• “review”

• “share”

1. Press the “review” BUTTON.


3. Press:

• 4-WAY BUTTON left and right to display images


4. Check that options display.

5. Press:


• “review” BUTTON again to quit

6. Press:


• SHUTTER BUTTON

7. Check:

• CAMERA quits the “Review” mode



Diagnostics

SM1132-1 – 11NOV05 29

FLASH 1. Press the FLASH BUTTON.


3. Press the FLASH BUTTON again 3 times to check that the “Flash” icon changes to:

• “Auto Flash”

• “Fill Flash”

• “Red Eye”

• “Flash Off”

4. Press the SHUTTER BUTTON.

5. Check:

• image is captured without the FLASH


SHUTTER 1. Press the SHUTTER BUTTON to capture an image.

2. Check:

• green LED blinks once before the CAMERA captures the image

• image appears on the MONITOR LCD

• green LED blinks when the CAMERA stores the image

BUTTON/SWITCH Do:

SERVICE MANUAL

30 11NOV05 – SM1132-1

[27] Press:

• 4-WAY BUTTON left and right to check that the exposure value changes

• 4-WAY BUTTON up to select the “Zoom” mode

• SHUTTER BUTTON to capture an image

[28] Check that the MONITOR LCD displays:

• image

• icons:

– “Flash” mode

– quality of the image

– type of memory

– “Zoom” mode

– exposure value

• number of additional images that can be captured

“delete” 1. Press:



2. Check that options display.

3. Select the “EXIT” option.

4. Press:

• “OK” BUTTON to quit the “delete” screen

• “review” BUTTON to return to the “Auto” mode

5. Press:



• SHUTTER BUTTON to capture an image

6. Check:

• CAMERA quits the “delete” screen



7. Immediately press the “delete” BUTTON.

8. Use the 4-WAY BUTTON to select “YES”.

9. Press:

• “OK” BUTTON


10. Use the 4-WAY BUTTON to check that the image is deleted.

11. Press the “delete” BUTTON.

12. Use the 4-WAY BUTTON to select “PICTURE”.

13. Press:

• “OK” BUTTON to delete the image

• “OK” BUTTON again to select “EXIT”

14. Use the 4-WAY BUTTON to check that the image is deleted.

15. Press the “review” BUTTON to quit.

BUTTON/SWITCH Do:

Diagnostics

SM1132-1 – 11NOV05 31

[29] Press the “OK” BUTTON to quit the “Zoom” mode.

[30] Check the positions of the MODE DIAL.

After moving the MODE DIAL to: Do:

“Video” 1. Check:

• “Video:” displays on the MONITOR LCD

• FRAMING MARKS are disabled

2. Press and release the SHUTTER BUTTON.

3. During the video recording, check:

• green LED flashes

• “REC” on the MONITOR LCD flashes

• recording time displays on the MONITOR LCD

4. Press and release the SHUTTER BUTTON.

5. Check that the MONITOR LCD displays an option of “Play or Pause”.

6. Press the “OK” BUTTON.

7. Check that the video begins to play back.

8. Press the “OK” BUTTON.

9. Check that the video stops.

10. Press the “delete” BUTTON.

11. Check that the MONITOR LCD displays “VIDEO” in the list of options.

12. Press:

• “delete” BUTTON to quit


13. Check that the MONITOR LCD illuminates in “Liveview” mode.

“Favorites” 1. Check that “Entering Favorites...” displays on the MONITOR LCD.

2. Press the “menu” BUTTON.

3. Check that the MONITOR LCD displays a list of options.

4. Press:

• “menu” BUTTON to quit


SERVICE MANUAL

32 11NOV05 – SM1132-1

Checking the Communication[1] Connect the CAMERA DOCK to the computer with the USB CABLE for the CAMERA DOCK.

[2] Download the images and the video file with the USER SOFTWARE.

[3] Check the quality of the images.

[4] Do “Connecting to the SERVICE SOFTWARE” on Page 52. If successful, the USB interface on the DOCK CONNECTOR is operating correctly.


[6] Connect the CAMERA to the computer with the USB CABLE for the CAMERA.

[7] Download the 2 images with the USER SOFTWARE. If successful, the USB CONNECTOR on the MAIN BOARD is operating correctly.

Checking the Accessories[1] Disconnect the USB CABLE from the CAMERA.

[2] Connect the VIDEO MONITOR to the CAMERA with the VIDEO CABLE.

[3] If you are not using the internal memory, insert a MEMORY CARD with image files into the CAMERA.


[5] Press the “review” BUTTON.

[6] Check that the MONITOR LCD de-energizes and the image displays on the VIDEO MONITOR.




[10] Check that the green LED next to the VIEWFINDER blinks.

Checking the External Components of the CAMERA[1] Check the COVERS of the CAMERA for scratches.

[2] If necessary, install new COVERS.

[3] Clean:

• COVERS

• SCREEN on the MONITOR LCD

• VIEWFINDER WINDOW

• FLASH COVER

[4] Check and clean the LENS.

Adjustments

SM1132-1 – 11NOV05 33

Section 4: Adjustments

MASTER CAMERA - “Calibration of the MASTER CAMERA”

Adjustment Specification

ImportantDo not use the CAMERA DOCK in this procedure.

Prerequisites:None

NoteCalibration of the SHUTTER in the MASTER CAMERA is completed after manufacturing.

To Check:You cannot check this adjustment.

To Adjust:

Important• The C315 CAMERA and MEMORY CARDS are used for the examples in this procedure.

• The procedure can be used for:

– C315 CAMERA

– C530 CAMERA

– CD50 CAMERA

• If you are doing a calibration of a CAMERA other than a C315 CAMERA, use the correct MASTER CAMERA and MEMORY CARDS made for that CAMERA in the procedure in Step 1.

[1] Do “Making the “Master Camera” MEMORY CARDS” on Page 54.

[2] Insert:

• new BATTERY with a full charge into a C315 MASTER CAMERA

• “C315 Master Camera” MEMORY CARD into the CAMERA

Purpose: To set the values for Automatic White Balance, ISO, and ID of the MASTER CAMERA.

Do When: Before calibrations of this type of CAMERA.

Specification: No failure messages display.

Special Tools: • Computer with a MEMORY CARD READER/WRITER

• BATTERY

• LIGHT BOX

• SD/MMC MEMORY CARDS

SERVICE MANUAL

34 11NOV05 – SM1132-1

[3] Place the CAMERA in front of the LIGHT BOX.

• The LENS must be within 3 mm (0.1 in.) of the screen, but not touching the screen of the LIGHT BOX.

• The center of the LENS must be placed in the center of the light.

[4] Set the LIGHT BOX to LV10.

[5] Rotate the MODE DIAL to “AUTO” to execute the test.


[7] When the test is completed, check that the MONITOR LCD displays “Big LB OK”.


ImportantYou must use the same LIGHT BOX when using this MEMORY CARD for calibration of other C315 CAMERAS.


[10] Check that the following 4 additional files were written on the MEMORY CARD:

• “BIG_LAMP.fig”

• “BoxID_ref.fig”

• “CameraID_ref.fig”

• “K_RESULT.txt”

[11] Do Step 2 to Step 6 again.

[12] When the test is completed, check that the MONITOR LCD displays “Small LB OK”.



[15] Check that the following 2 additional files were written on the MEMORY CARD:

• “CamerID_ref.fig”

• “Small_LAMP.fig”

[16] Make a copy:

• all of the files to another MEMORY CARD for any additional calibrations of CAMERAS

• 6 result files to the “Batch” folder on the MEMORY CARD with the name “C315 AWB” or the AWB MEMORY CARD for the type of CAMERA you are using

Adjustments

SM1132-1 – 11NOV05 35

[17] If the MONITOR LCD displays a failure message, do the correction:

Postrequisites:None

Failure Cause Correction

“W/O Shutter K” The calibration of the SHUTTER was not correct.

Do:1. “Making the “Shutter Delay” MEMORY CARDS” on

Page 57

2. Making the “Master Camera” MEMORY CARDS on Page 54 again

“Memory Fail” An occasional failure occurred during a test of the memory.

1. Do Making the “Master Camera” MEMORY CARDS on Page 54 again.

2. If the message occurs again, check the hardware.

“ISO Cal Fail” A failure occurred during the calibration.

1. Check:

• LIGHT BOX

• LV value

2. Do Making the “Master Camera” MEMORY CARDS on Page 54 again.

SERVICE MANUAL

36 11NOV05 – SM1132-1

CCD - “AWB/ ISO/DBP”



Prerequisites:[1] Do “MASTER CAMERA - “Calibration of the MASTER CAMERA”” on Page 33.


To Adjust:



– C315 CAMERA

– C530 CAMERA

– CD50 CAMERA

• If you are doing a calibration of a CAMERA other than a C315 CAMERA, use the correct MASTER CAMERA and MEMORY CARDS made for that CAMERA.

[1] Do “Making the “AWB/ISO/DBP” MEMORY CARDS” on Page 58.

[2] Check that a copy of the test result files from the procedure MASTER CAMERA - “Calibration of the MASTER CAMERA” on Page 33 are in the “Batch” folder on the “C315 AWB” MEMORY CARD.

[3] Insert:

• new BATTERY with a full charge into a C315 CAMERA

• “C315 AWB” MEMORY CARD into the CAMERA

[4] Set the LIGHT BOX to:

• LV10

• color temperature 5800 K

[5] Place the center of the LENS against the screen of the LIGHT BOX.



Purpose: To set the values for Automatic White Balance, ISO, and ID of the CAMERA.

Do When: After installing a new MCU BOARD/LENS AY.

Specification: The failure message does not display.


• BATTERY

• LIGHT BOX


Adjustments

SM1132-1 – 11NOV05 37

[8] When the test is completed, check that the MONITOR LCD displays “ISO Cal OK”.

NoteThe result file “K_RESULT.TXT” is written to the MEMORY CARD.


[10] Remove the MEMORY CARD from the CAMERA.

[11] If the MONITOR LCD displays the failure message “ISO Cal Fail”:

• open the file “K_RESULT.TXT” to obtain the type of failure

• do the necessary correction

Postrequisites:None

Failure Cause Correction

“W/O Shutter K” The calibration of the SHUTTER was not correct.

Do:1. “MCU BOARD/LENS AY - “Shutter Delay””

on Page 38

2. CCD - “AWB/ ISO/DBP” on Page 36 again

“Memory Fail” An occasional failure occurred during a test of the memory.

1. Do CCD - “AWB/ ISO/DBP” on Page 36 again.

2. If the message occurs again, check the hardware.

“ISO Cal Fail” A failure occurred during the calibration.

1. Check:

• LIGHT BOX

• LV value

2. Do CCD - “AWB/ ISO/DBP” on Page 36 again.

SERVICE MANUAL

38 11NOV05 – SM1132-1

MCU BOARD/LENS AY - “Shutter Delay”



Prerequisites:None


To Adjust:



– C315 CAMERA

– C530 CAMERA

– CD50 CAMERA

• If you are doing a calibration of a CAMERA other than a C315 CAMERA, use the correct MASTER CAMERA and MEMORY CARDS made for that CAMERA.

[1] Do “Making the “Shutter Delay” MEMORY CARDS” on Page 57.

[2] Insert:

• new BATTERY with a full charge into the C315 CAMERA

• “C315 Shutter Delay” MEMORY CARD into the CAMERA

[3] Set the LIGHT BOX to LV15.

[4] Place the center of the LENS against the screen of the LIGHT BOX.



[7] When the test is completed, check that the MONITOR LCD displays “Shutter Calibrate OK”.


[9] Remove the MEMORY CARD from the CAMERA.

Purpose: To set the parameters for the speed of the SHUTTER.

Do When: • After installing a new MCU BOARD/LENS AY.

• Exposure of the images displayed on the MONITOR LCD is too high or too low.

Specification: No failure messages display.


• BATTERY

• LIGHT BOX


Adjustments

SM1132-1 – 11NOV05 39

Postrequisites:None

SERVICE MANUAL

40 11NOV05 – SM1132-1

Section 5: Replacements

ImportantYou must see the “Equipment Parts” on Page 10 for all parts information.

Additional Service Procedures

SM1132-1 – 11NOV05 41

Section 6: Additional Service Procedures

Downloading the Files from the Partner Site[1] From the Kodak Partner site, download the software and firmware files from:

• Kodak EasyShare C315 DIGITAL CAMERA_Software_and_Firmware

• Kodak EasyShare C530 DIGITAL CAMERA_Software_and_Firmware

• Kodak EasyShare CD50 DIGITAL CAMERA_Software_and_Firmware

• Altek Vista SERVICE SOFTWARE

ImportantEach of the “.zip” files for the CAMERAS has 2 folders:

• “Firmware”, that has a folder labeled for the version of the firmware file

• “Scripts”, that has folders labeled for each of the tests that have a “Batch” folder for each test

[2] Right-click the “C315_Software_and_Firmware.zip” file.

[3] Select WinZip>Extract to here.

[4] Right-click the “C530_Software_and_Firmware.zip” file.


[6] Right-click the “CD50_Software_and_Firmware.zip” file.


[8] Right-click the “Vista_Service_Software.zip” file.


[10] Check for the following folders:

• “C315_Software_and_Firmware”

• “C530_Software_and_Firmware”

• “CD50_Software_and_Firmware”

• “Vista”

SERVICE MANUAL

42 11NOV05 – SM1132-1

Installing the Altek Vista SERVICE SOFTWARE on the Computer

ImportantMicrosoft Windows XP OPERATING SYSTEM is necessary for the correct operation of the SERVICE SOFTWARE.

[1] Open the folder:

• “Vista”

• “Setup”

[2] Double-click “Setup.exe”.

[3] Wait until:

• this window is complete

• the next window displays


SM1132-1 – 11NOV05 43

[4] Click [Next>].

[5] After selecting a folder, click [Next>].

SERVICE MANUAL

44 11NOV05 – SM1132-1

[6] Click [Yes].

[7] Check that an icon for the “Vista for Service” appears on the computer screen.

[8] Connect the CAMERA to the computer with the USB CABLE.


[10] Check that Kodak EasyShare SOFTWARE detects the CAMERA.

[11] Click:

• [Cancel] at the “Transfer” window

• [Exit]

[12] At the lower right edge of the computer screen, right-click on the “Kodak” icon

[13] Select “Shut Down Kodak EasyShare software”.

[14] Select Start>Settings>Control Panel>System.

[15] At the “System Properties” window, click:

• “Hardware” tab

• [Device Manager]


SM1132-1 – 11NOV05 45

[16] Double-click:

• “Imaging devices”

• “KODAK Digital Camera”

[17] Click [Update Driver...].

SERVICE MANUAL

46 11NOV05 – SM1132-1

[18] Choose “Install from a list or specific location (Advanced)”.

[19] Click [Next].

[20] Choose “Don’t search. I will choose the driver to install”.

[21] Click [Next].


SM1132-1 – 11NOV05 47

[22] Select “Kodak Easy Share Ares, USD”.

[23] Click [Next].

[24] Click [Continue Anyway].

SERVICE MANUAL

48 11NOV05 – SM1132-1

[25] Click [Finish].


[27] Double-click the “Vista for Service” icon.

[28] To energize the CAMERA:

• press and hold

– “delete” BUTTON

– “review” BUTTON

• rotate MODE DIAL to “AUTO”

[29] Continue with the “Doing the Configuration of the SERVICE SOFTWARE” on Page 49.


SM1132-1 – 11NOV05 49

Doing the Configuration of the SERVICE SOFTWARE

ImportantYou must do this procedure only once.


[2] Click [OK].

[3] Select Settings>Password...

[4] Click [Change Pwd].

[5] Enter a password in the “New Password:” field.

SERVICE MANUAL

50 11NOV05 – SM1132-1

[6] Enter the same password in the “Confirm Password:” field.

[7] Click [OK].

[8] Select Settings>Configuration...

[9] Check that the information in the fields on this screen match the graphic.

NoteIf the information is not the same, you must enter the information to match the graphic.

[10] Click [OK].

[11] Select Settings>Specifications...


SM1132-1 – 11NOV05 51

[12] Check that the file “kodak.spe” has the correct path.

[13] Click [OK].

SERVICE MANUAL

52 11NOV05 – SM1132-1

Connecting to the SERVICE SOFTWARE


[2] If a password was set during the configuration, select Settings>Password.

[3] Enter the password in the field “Old Password”.

[4] Click [OK].


(a) At the same time,

• press and hold:

– “delete” BUTTON

– “review” BUTTON


[6] Check:

• “New Hardware Found” screen appears

• green LED next to the VIEWFINDER on the CAMERA blinks

[7] Click the “Take” icon.

[8] Click [Yes].

[9] If no errors display, continue with “Checking for Uniform Flash” on Page 23.


SM1132-1 – 11NOV05 53

[10] If any of the error windows appear when you run the SERVICE SOFTWARE:

• Click [OK].

• Do Connecting to the SERVICE SOFTWARE again.

• Check:

– CAMERA is energized

– connections for the USB CABLE

– connections for the AC ADAPTER

– connections the CAMERA DOCK

– see “Installing the Altek Vista SERVICE SOFTWARE on the Computer” on Page 42

SERVICE MANUAL

54 11NOV05 – SM1132-1

Making the MEMORY CARDS for Service

Making the “Master Camera” MEMORY CARDS[1] Obtain a MASTER CAMERA of each:

• EasyShare C315 DIGITAL CAMERA


• EasyShare CD50 DIGITAL CAMERA

[2] Open the folder “C315_Software_and_Firmware”.

[3] Double-click the folder “Scripts”.

[4] Double-click the folder “master camera”.

[5] Double-click the folder “Batch”.


SM1132-1 – 11NOV05 55

[6] Check that the following 4 files are in this folder:

• “AEAWB_ISO100Calibration.log”

• “AEAWB_ISO100Calibration.srt”

• “BatchScripts.log”

• “BatchScripts.txt”

[7] Close the folder.

[8] Make a copy of the folder “Batch” to a blank MEMORY CARD.

[9] Label the MEMORY CARD “C315 Master Camera”.


[11] Do Step 3 - Step 8 again.

[12] Label the MEMORY CARD “C530 Master Camera”.

[13] Open the folder “CD50_Software_and_Firmware”.


[15] Label the MEMORY CARD “CD50 Master Camera”.

SERVICE MANUAL

56 11NOV05 – SM1132-1

Making the “Self Test” MEMORY CARDS[1] Obtain 3 blank MEMORY CARDS for each CAMERA:



• EasyShare CD50 DIGITAL CAMERA

[2] On the computer, open the folder “C315_Software_and_Firmware”.


[4] Double-click the folder “Self Test”.


[6] Label the MEMORY CARD “C315 Self Test”.



[9] Label the MEMORY CARD “C530 Self Test”.



[12] Label the MEMORY CARD “CD50 Self Test”.


SM1132-1 – 11NOV05 57

Making the “Shutter Delay” MEMORY CARDS



[3] Double-click the folder “Shutter delay”.


[5] Label the MEMORY CARD “C315 Shutter Delay”.



[8] Label the MEMORY CARD “C530 Shutter Delay”.



[11] Label the MEMORY CARD “CD50 Shutter Delay”.

SERVICE MANUAL

58 11NOV05 – SM1132-1

Making the “AWB/ISO/DBP” MEMORY CARDS



[3] Double-click the folder “AWB ISO DBP”.


[5] Label the MEMORY CARD “C315 AWB”.



[8] Label the MEMORY CARD “C530 AWB”.



[11] Label the MEMORY CARD “CD50 AWB”.


SM1132-1 – 11NOV05 59

Doing a Calibration of the Test Equipment

Setting up the LIGHT BOX - “Light Box Calibration (LV10.0)”

Important• This calibration:

– adjusts for the differences in color temperature between the FACTORY LIGHT BOX and a SERVICE LIGHT BOX

– must be run once using a MASTER CAMERA before any of the “Adjustments” on Page 33, that use the LIGHT BOX with this type of CAMERA, can be run

– should also be run when the LIGHT BULB is changed

• Do not use the CAMERA DOCK.

[1] Do “Making the “Master Camera” MEMORY CARDS” on Page 54.

[2] Install into the CAMERA:

• BATTERY

• “Master Camera” MEMORY CARD for the type of CAMERA

[3] Set the LIGHT BOX to LV10.0.

Important• The CAMERA must be placed in the center of the LIGHT BOX.

• The LENS must not touch the SCREEN of the LIGHT BOX.

[4] Place the MASTER CAMERA in front of the LIGHT BOX.

[5] Rotate the MODE DIAL to “AUTO”.

[6] If the Date and Time Setting mode displays on the MONITOR LCD, select “CANCEL”.

[7] The calibration is complete when the MONITOR LCD displays “Big LB OK”.

NoteThe calibration results are stored on the “Master Camera” MEMORY CARD. The files include:

• “BIG_LAMP.fig”

• “BoxID_ref.fig”

• “CameraID_ref.fig”

• “K_RESULT.txt”


[9] Do Step 3 to Step 6 again.

[10] The calibration is complete when the MONITOR LCD displays “Small LB OK”.

NoteThe calibration results are stored on the “Master Camera” MEMORY CARD. The files include:

• “CamerID_ref.fig”

• “Small_LAMP.fig”


[12] Remove the “Master Camera” MEMORY CARD from the CAMERA.

[13] If the calibrations are successful, make a copy of the results files into the“Batch” folder on the MEMORY CARDS that are to be used for the “AWB/ISO/DBP” adjustments.

SERVICE MANUAL

60 11NOV05 – SM1132-1

[14] If the calibrations are not successful, do:

Failure Description Cause Action

“W/O Shutter K” No SHUTTER calibration. Do the procedures:1. “MCU BOARD/LENS AY - “Shutter Delay”” on

Page 38

2. “Doing a Calibration of the Test Equipment” on Page 59 again

“Memory Fail” Software “script” failure Do the procedure “Doing a Calibration of the Test Equipment” on Page 59 again.

“ISO Cal Fail” Environment variation 1. Check the settings and environment variations.

2. Do the procedure “Doing a Calibration of the Test Equipment” on Page 59 again.


SM1132-1 – 11NOV05 61

Downloading the Firmware for the First Time

ImportantWhen you install a new MCU BOARD/LENS AY, the correct version of the firmware file must be installed.

[1] Insert a MEMORY CARD into a CARD READER/WRITER.

[2] Erase all files from the MEMORY CARD.

[3] Obtain the firmware file for the CAMERA you are repairing from the https://partner.kodak.com/ Web site.

Important“xxxx” is the type of CAMERA. For example, “TBM_C315.bin”.

[4] Make a copy of the “TBM_xxxx.bin” firmware file to the root of the MEMORY CARD.

[5] Remove the MEMORY CARD from the CARD READER in the computer.

[6] Insert into the CAMERA:

• BATTERY that has a full charge

• MEMORY CARD with the firmware file

[7] Does the MCU BOARD/LENS AY have a version of firmware installed?

[8] Check that the CAMERA reads the MEMORY CARD and energizes.



[11] Check that the firmware on the CAMERA is the correct version.

[12] Does the CAMERA energize and the MONITOR LCD display instructions?

Yes No

To energize the CAMERA, at the same time:• press the “delete” BUTTON


To energize the CAMERA, rotate the MODE DIAL to “AUTO”.

Yes No

Continue to “Upgrading the Firmware Using the MEMORY CARD” on Page 62.

a. Remove:

• MEMORY CARD

• BATTERY

b. Insert:

• MEMORY CARD


c. Do Step 4 to Step 12 again.

SERVICE MANUAL

62 11NOV05 – SM1132-1

Upgrading the Firmware Using the MEMORY CARD[1] Obtain the firmware file for the CAMERA you are repairing from the https://partner.kodak.com/ Web site.


[3] Check that “AUTO...” is selected for the “IMAGE STORAGE”.

[4] Format the MEMORY CARD in the CAMERA.


[6] Insert an MEMORY CARD in a CARD READER/WRITER:

[7] Make a folder in the root directory on the MEMORY CARD with the name “System”.

Important“xxxx” is the type of CAMERA. For example, “KC315.FW”.

[8] Make a copy of the “TBM_xxxx.bin” firmware file to the “System” folder on the MEMORY CARD.

[9] Change the file name to “Kxxxx.FW”.

[10] Remove the MEMORY CARD from the CARD READER/WRITER.

[11] Insert into the CAMERA:


• MEMORY CARD with the firmware file

ImportantDo not rotate the MODE DIAL after the energizing.

[12] At the same time:

• press the “delete” BUTTON


[13] Check that the CAMERA energizes.

[14] Select:

• “UPGRADE”

• “CONTINUE”

[15] Check:

• downloading begins

• downloading completes

[16] Select “EXIT”.





[21] If either of the following conditions occur, do “Downloading the Firmware for the First Time” on Page 61:

• upgrading the firmware was not successful

• a power failure occurs in the CAMERA during the downloading


SM1132-1 – 11NOV05 63

Upgrading the Firmware Using the Internal Memory[1] Obtain the firmware file for the CAMERA you are repairing from the https://partner.kodak.com/ Web site.

Important“xxxx” is the type of CAMERA. For example, “KC315.FW”.

[2] Make a copy of the “TBM_xxxx.bin” firmware file.

[3] Change the file name to “Kxxxx.FW”.

[4] Connect a USB CABLE to:

• CAMERA

• computer


[6] Select:

• “Kxxxx.FW” file

• Edit>Copy

[7] Double-click:

• “My Computer” icon

• “xxxx CAMERA” icon

• “Internal Memory” folder

[8] Select:

• firmware file in the “Internal Memory” folder

• Edit>Paste


[10] Disconnect the USB CABLE from:

• CAMERA

• computer


[12] Select:

• “UPGRADE”

• “CONTINUE”

NoteThe upgrading of the firmware file completes in less than 2 minutes.

[13] Select “EXIT”.




SERVICE MANUAL

64 11NOV05 – SM1132-1

Checking the ACTUATION, FLASH, POWER-ON COUNTERS and Serial Number


[2] Press the “menu” BUTTON.

[3] Use the 4-WAY BUTTON to do a search for “SETUP MENU”.

[4] Press the “OK” BUTTON.

[5] Use the 4-WAY BUTTON to do a search for “ABOUT...”.


[7] Check that the MONITOR LCD displays the firmware version.

[8] At the same time, press:

• 4-WAY BUTTON to the right


[9] Release the BUTTONS.

[10] Press the 4-WAY BUTTON up to “TOTAL INFO”.


[12] Record the information for the COUNTERS in the FEEDBACK SOFTWARE.

[13] Press:

• 4-WAY BUTTON left 2 times

• “OK” BUTTON

• “menu” BUTTON to exit

COUNTERS on the CAMERA Description on the FEEDBACK SOFTWARE

ID “ID of production Serial Number”

BV “Boot code Version”

MV “Micro processor code Version”

CS “Actuation”

CF “Flash”

CP “Power On”

Diagrams

SM1132-1 – 11NOV05 65

Section 7: Diagrams

BlockSystem Overview

ASI

C

SDR

AM

(8M

x16)

SD

Car

d

1.6

inch

Col

or L

CD8.5V

5V LE

D b

ackl

ight

Vid

eo o

ut

uP32

.768

KH

z

4.91

52M

Hz

Res

et_i

n

I2C

12

MH

z

Len

s

LE

D R

,G.

3.3V

5M CC

DC

DS/

AD

V D

ri.

15V

& -

9.5V

shut

ter

Sig.

in

H1/

H2/

RG

W o

k

T

5 w

ay b

utto

n

Tak

e bu

tton

Self

tim

er L

ED

Mod

e D

ial

USB

co

nn.

Doc

k

Shar

e,D

ock

det.,

batte

ry c

harg

e

DO

CK

_PW

R

Bat

tery

Pow

er s

el.

F1

F2D

ock_

BA

T+

DC

/DC

conv

ert

15.5

V- 8

V3.

3V1.

8VM

3.3

5V 8.6V

feedback

8.5V

FB4

I/F

SD1

OU

T6

SD2~

4

Flas

h li

ght

Flas

hT

rigg

erci

rcui

t

Stro

beC

ap.

Flas

h C

harg

eC

ircu

it

3.3V

PWR

Flas

h T

RG

Flas

h C

HR

Flas

h R

DY

Bat

. Typ

e D

et.

Flas

h T

RG

Bat

. Tem

p.se

nsor

I/F

Doc

k PW

R3.

3V

Tak

e bo

ard

DC

_ PW

R

MC

U3.

3V

Vid

eo/A

uto/

Nig

ht S

W

.

Nan

dF

lash

Wit

h B

oot

code

(16M

x8)

Top

poly

LC

D D

RV

.

P26

9_00

01K

A_

1.6

inch

Col

or L

CD

Sys

tem

Ove

rvie

w

SERVICE MANUAL

66 11NOV05 – SM1132-1

SchematicsMCU BOARD/LENS AY - 1 of 7

MC

U B

OA

RD

/LE

NS

AY

- 1

of 7

P26

9_00

02K

C_

Diagrams

SM1132-1 – 11NOV05 67

MCU BOARD/LENS AY - 2 of 7

MC

U B

OA

RD

/LE

NS

AY

- 2

of 7

P26

9_00

03K

C_

SERVICE MANUAL

68 11NOV05 – SM1132-1


MC

U B

OA

RD

/LE

NS

AY

- 3

of 7

P26

9_00

04K

C_

Diagrams

SM1132-1 – 11NOV05 69


MC

U B

OA

RD

/LE

NS

AY

- 4

of 7

P26

9_00

05K

C_

SERVICE MANUAL

70 11NOV05 – SM1132-1


MC

U B

OA

RD

/LE

NS

AY

- 5

of 7

P26

9_00

06K

C_

Diagrams

SM1132-1 – 11NOV05 71


MC

U B

OA

RD

/LE

NS

AY

- 6

of 7

P26

9_00

07K

C_

SERVICE MANUAL

72 11NOV05 – SM1132-1


MC

U B

OA

RD

/LE

NS

AY

- 7

of 7

P26

9_00

08K

C_

Diagrams

SM1132-1 – 11NOV05 73

MODE DIAL CIRCUIT

MO

DE

DIA

L C

IRC

UIT

P26

9_00

09K

C_

SERVICE MANUAL

74 11NOV05 – SM1132-1

POWER BOARD - 1 of 3

C3

0.1U

F/1

6V

R6

560R

/060

3

Q3

TP

C61

03

D1

D2

G3

S4

D5

D6

R4

24R/0.25W/R1206

Q1

AO

8803

D1

1

S1

2

S1

3

G1

4G

25

S2

6S

27

D2

8

R2

24R/0.25W/R1206

R9

100K

Q2

AM

2326

N2

3 1

R5

22K

F2

2.5A

/32V

C1

100u/6.3V/CV-EX

+

J3

CO

N28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Q4

RT

1N24

1M

2

13

22K

22K

R1

24R/0.25W/R1206

F1

2.5A

/32V

D

1S

SM

34A

12

C4

0.1U

F/1

6V

D3

BA

T54

C

23

1

C2

0.1U

F/1

6V

S1

SW

1AB

-420

-T35

R8

1K/R

0603

J2 BA

TT

-1

R3

24R/0.25W/R1206

J1 BA

TT

+1

R7

330K

BA

TT

+

DO

CK

_PW

R

BA

TT

+

BA

TT

_TY

PE

BA

TT

-

DO

CK

_BA

T+

FU

LL_L

OA

D_E

NA

BLE

FU

LL_L

OA

D_E

NA

BLE

PW

RDO

CK

_BA

T+

BA

TT

_TY

PE

DO

CK

_PW

R

DO

CK

_PW

R

3.3V

PW

R

DO

CK

_PW

R

DO

CK

_PW

R

M3.

3V

3.3V

15.5

V

5.0V

8.6V

-8V 1.

8VS

D3

SD

1

CH

R_C

trl

ST

R_T

RG

ST

R_R

DY

ST

R_C

HR

28P

IN

BO

AR

DT

OB

OA

RD

CO

NN

EC

T

For

Fix

ed L

ocat

ion

PA

D T

O G

ND

PO

WE

R B

OA

RD

- 1

of 3

P26

9_00

10K

C_

Diagrams

SM1132-1 – 11NOV05 75


R13

1M-1

%

D7

SS

M58

18S

12

C15

1uF

/10V

/Y5U

/C06

03

L56.

8uH

/7E

06N

AC

26

10UF/6.3V/X5R/C0805

R39

100K

-1%

R22

300K

-1%

C14

0.01

UF

/X7R

/25V

R21

10K

-1%

C9

2.2u

F/1

0V/Y

5U/C

0603

Q14

AM

2327

P

2

31

D6

SS

M58

18S

12

R12

47K

R27

100K

Q8

RT

1P14

0M-T

111-

1

1

2

3

C20

10UF/6.3V/X5R/C0805

R11

100k

R42

51K

-1%

R28

47K

C35

0.1U

F/1

6V

C10

4.7uF/25V/X5R/C1206

R30 47

K

R14

10K

R46

100K

C32 1U

F/6

.3VR

3747

K

C21

0.01

UF

/X7R

/25V

C19

1nF

/25V

/X7R

R29

1R/R

0603

C30

10UF/6.3V/X5R/C0805

R33

332K

-1%

C22

0.01

UF

/X7R

/25V

F3

2.0A

/32V

C40

0.1U

F/1

6V

C24

10UF/6.3V/X5R/C1206

+

R10

10K

R25

100K

-1%

R36

7.5K

C50

0.1uF/25V/C0603

Q13

2N70

02E

PT

2

3 1

R23

10K

-1%

U1

MA

X15

65

FB325OUTSUB26

DL327DL228DL129GND30

COMP231FB232

FB

SE

LSD

17F

BS

EL1

18O

SC

19P

GN

DB

20LX

SU

21O

UT

SU

A22

SD

OK

23C

OM

P3

24

ON1 9

CO

MP

11

ON2 10

ON3 11

FB

12

ONSU 12

REF 13

PG

ND

A3

FBSU 14

COMPSU 15

LXS

D4

FBSELSU 16

INS

D5

ON

SD

6

CO

MP

SD

7

FB

SD

8

IC GND33

C13

4.7uF/25V/X5R/C1206

R31

44.2

K-1

%

C6 4.7uF/25V/X5R/C1206

C27

0.47uF/X5R/C0603

R40

100K

-1%

C23

100uF/6.3V/B

+

R44

10K

L310

uH/7

E05

NA

C5

1uF

/25V

/X5R

/C08

05

C8

10uF/25V/X5R/C1206

C25

0.01

UF

/X7R

/25V

C28

1uF/10V/X5R/C0603

C16

10uF/6.3V/X5R/C0805

D4

SS

M58

18S 1

2

C29

10UF/6.3V/X5R/C0805

C34

100P

F/5

0V/C

0603

R24

100K

-1%

R18

86.6

K-1

%

Q9

RT

1N24

1M

2

13

22K

22K

L4 10uH

/7E

06N

A

D8

SS

M58

17S

12

R38

36.5

K-1

%/R

0603

R19

590K

-1%

C31

0.01

UF

/X7R

/25V

C12

4.7u

F/1

0V/Y

5U/C

0603

R41

0R/R

0603

R16

75K

R35

100K

-1%

Q7

AO

3418

2

3 1

D5

SS

M58

18S

1 2

Q11

AM

2326

N2

3 1

R32

332K

-1%

R15

10K

-1%

C37

0.1U

F/1

6V

C36

6800

PF

/50V

/C06

03

Q15

RT

1N24

1M2

13

22K

22K

R43

0R/R

0603

L14.

7uH

/7E

05N

A

C38

0.1U

F/1

6V

Q16

2N70

02E

PT

2

3 1

Q6

AM

2327

P

2

31

C11

1uF

/10V

/Y5U

/C06

03

R20

3.9K

-1%

R47

1K

C33

0.01

UF

/X7R

/25V

R48

100K

C39

1UF

/6.3

V

R45

100K

Q5

AM

2326

N

2

31

R26

51K

L24.

7uH

/7E

05N

A

C7

0.01

UF

/X7R

/25V

C17

10uF/6.3V/X5R/C0805

R34

100K

-1%

Q10

AM

2326

N2

3 1

R17 10

0K

C18

0.01

UF

/X7R

/25V

Q12

2N70

02E

PT

2

3 1

DL1

ON

3O

NS

U

DL3

FB

SD

ON

2

OU

TS

U

LXS

U

ON

3

ON

1

DL2

SD

1

OU

TS

U

SD

1

DL3

DL1

3.3V

OU

TS

U

3.3V

FB

SU

FB

1

FB

SU

OU

TS

U

DL2

ON

SU

CO

MP

SU

ON

2

ON

1

ON

SU

3.3V

FB

2

FB

2

FB

3

OU

TS

U

PW

R

FB

3

FB

1

FB

SD

3.3V

PW

R8.

6V

OU

TS

U

3.3V

PW

R

M3.

3V

PW

R

15.5

VP

WR

1.8V

1.8V

5.0V

-8V

15.5

V

SD

3S

D1

SD

3

SE

LEC

T(N

C)

(NC

)

(NC

)

(NC

)

PO

WE

R B

OA

RD

- 2

of 3

P26

9_00

11K

C_

SERVICE MANUAL

76 11NOV05 – SM1132-1


PO

WE

R B

OA

RD

- 3

of 3

P26

9_00

12K

C_

Diagrams

SM1132-1 – 11NOV05 77

SHUTTER BOARD

SH

UT

TE

R B

OA

RD

P26

9_00

13H

C_

SERVICE MANUAL

78 11NOV05 – SM1132-1

Component LocatorMCU BOARD/LENS AY - 1 of 2, Top

MC

U B

OA

RD

/LE

NS

AY

- 1

of 2

, Top

P26

9_00

14D

C

Diagrams

SM1132-1 – 11NOV05 79

MCU BOARD/LENS AY - 2 of 2, Bottom

MC

U B

OA

RD

/LE

NS

AY

- 2

of 2

, Bot

tom

P26

9_00

15D

C

SERVICE MANUAL

80 11NOV05 – SM1132-1

MODE DIAL CIRCUIT - 1 of 2, Top

MODE DIAL CIRCUIT - 2 of 2, Bottom

MODE DIAL CIRCUIT - 1 of 2, TopP269_0016HC

MODE DIAL CIRCUIT- 2 of 2, BottomP269_0017HC

Diagrams

SM1132-1 – 11NOV05 81

POWER BOARD - 1 of 2, Top

POWER BOARD - 1 of 2, TopP269_0018DC

SERVICE MANUAL

82 11NOV05 – SM1132-1

POWER BOARD - 2 of 2, Bottom

POWER BOARD - 2 of 2, BottomP269_0019DC

Diagrams

SM1132-1 – 11NOV05 83

SHUTTER BOARD

SHUTTER BOARDP269_0020GC

Publication History

Printed in U.S.A. • sm1132_1.fm

EASTMAN KODAK COMPANYRochester, NY 14650

Section 8: Publication History

Publication Date

Publication No.

ChangedPages

FileName Notes

11NOV05 SM1132-1 --- sm1132_1.fm New Publication

Kodak and EasyShare are trademarks of Eastman Kodak Company.

Documents

Kodak Easyshare c315 c530 Cd50