ASSEMBLY INSTRUCTIONSATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY.

PARTNO.

PARTS LIST

Attention: Make sure that each bolt needed for all steps matches the corresponding figure to ensure proper assembly.

Step 1:Insert the rear support brace (#4) to the arms (#2 and #3), fasten them by using bolts (#6) and steel washers (#11). Keep the bolts loose. See Figure 1.

MATERIAL CODE PART Q’TY PARTNO.

MATERIAL CODE PART Q’TY

KUS60FK

1

2

3

4

5

6

7

8 2

2

4

1

1

1

1

1 9

11

12

13

14

15

16

1

1

4

4

2

8

KUS60FK-CS11-1

KUS60FK-CS01-3

KUS60FK-CS01-2

KUS60FK-CS08-5

62KUS60FKH101

17C02A0712003Y4

17C01A0712001Y4

17C33A0706001Y4 17KAA0101----Y4

17KAA0201----Y4

18000337004

18000337001

18000337006

SEAT ASSEMBLY

RIGHT ARM

LEFT ARM

REAR SUPPORT BRACE

FRONT SUPPORT BRACE

BOLT M6*35

BOLT M6*35

BOLT M6*16 HEX.KEY WRENCH 4MM

HEX.KEY WRENCH 6MM

BOLT CAP

BOLT CAP M6

BOLT CAP M6

PAGE 1 OF 2

Note:The labels marked “L” and “R” on the arms (#2 and #3) should coincide with Figure 1 to ensure proper assembly.

17FA05040301-Y4

17C01A0706001Y4

WASHER d6.5*D13*1.0

2

2

17XA3309STEEL WASHER

10

Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required. Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should always be under direct adult supervision while using this product. Retain these assembly instructions for future reference.Quote the following FQC NO. when contacting the service center.

Chair is for sitting purpose only standing or misuse of the chair may result in damage or injury. chair weight limit is 250LBS.

!

!

!

!

!!

FIGURE 1R

L

4

35

#6 BOLT M6*35

611

12

2 3

BOLT M6*16

Scottsdale 5PK Padded Spring Action Fabric Chairs

COURTYARD CREATIONS INC.

SERVICE CENTER TOLL FREE NO.TEL: 1-877-539-7436FAX: 1-877-539-7439

#9 BOLT M6*16

PAGE 2 OF 2

Step 3:Fasten the seat assembly (#1) to the arms (#2 and #3) by using bolts (#9) and washers (#10). Keep the bolts loose. See Figure 3.

FIGURE 3

FIGURE 4 FIGURE 5

Step 4:Fasten the seat assembly (#1) to the arms (#2 and #3) by using bolts (#8) and washers (#10). Make sure that all of the bolts have been tightened completely and cover them with bolt caps (#12, #13 and #14). See Figure 4.

2 3

1 109

14

FIGURE 2

3

2

51010

7

13

713

#8 BOLT M6*35

1

2

35 23

3

Step 2:Fasten the front support brace (#5) to the arms (#2 and #3) by using bolts (#7) and washers (#10). Keep the bolts loose. See Figure 2.

16

Step 5:You can adjust the leveler on the arms (#2 and #3) to keep the chair even when it is not stable. See Figure 5.

Cleaning and Maintenance• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on the frame or fabric parts.• We recommend the use of furniture covers when not in use.• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your chair.• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off season periods.

14810

#7 BOLT M6*1616

The store where you made your purchasedoes not stock parts for this item.

If you need parts,whether they are missing or damaged,

STOP!Missing A Part?

No Need To Go Back ToThe Store

Call us between 9:00 AM and 4:30 PMEastern Time Monday through Friday

Call Toll Free:TEL: 1-877-539-7436FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME SEPARATED DURING SHIPMENT.IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:1-MODEL NUMBER OF THE PRODUCT.2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST.MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT TO THE RETAILER.