Dynemech Lathe Leveling Jacks and Levelling Mounts

Lathe Machinery Mounts to isolate all Industrial Metal Working Machinery

Lathe machinery is one of the most important machine tool in manufacturing

industries. Interaction between motors, pulleys, sheaves, chuck and gears cause

vibrations in all CNC lathes and Lathe machinery. Besides, self-excited chatter

is a basic performance limitation in the machining of metals in all heavy duty

lathe machines, requiring Dynemech Leveling Mounts to optimize performance.

WEDGE ACTION VIBRATION DAMPERS

Moreover, Lathe machine tools are liable to deterioration in their performance

level with respect to time due to various causes such as wear and tear, ageing,

unbalance, looseness of parts etc. and produce a corresponding increase of the

vibration level. So, better vibration damping and vibration isolation with leveler

anti vibration jacks and vibro mounts becomes imperative. Add to this the high

vibration frequencies due to belt tension fluctuations, gear tooth frequencies at

the mating gears, defects in bearing and unwanted vibrations due to unbalance

rotors. All the vibration related problems are addressed when Lathes are

installed on Dynemech Lathe leveling jacks and vibration damping leveling

mounts.

No Vibration Transmission-Lathe Machinery Mounts

Machine tool vibration in CNC lathes and heavy duty lathes, if uncontrolled,

can adversely affect the surface finish, dimensional accuracy and tool life.

About 70% of the failures in the machine tool could be due to increased

disturbing vibration level of the machine leading to production failures and

maintenance issues. Dynemech Lathe leveller jacks and leveler feet for lathe

offers economical solutions to such critical and costly production issues.

Heavy Duty Lathe Machine Fixators and Anti Vibration Mounts

Lathes having heavier stands are better at dampening the vibrations. But, even

strong, cast iron bases, because of their inherent metallic structures, are not

always adequate by themselves at damping vibrations generated during the

machining operations. For these Leveling plate for lathes –elastomeric leveling

jacks , spring viscous leveling mounts or pneumatic vibration dampers or

leveling jacks are required. Reducing or damping vibration in a lathe is

important for several reasons. It is imperative for more precise machining by

allowing greater dimensional control, leading to improved surface finishes on

the machined part and allowing faster machining speeds and heavier or deeper

cuts. All these attributes can be obtained by precise leveling and accurate

alignment of lathes on Dynemech Leveling Jacks and Machinery Mounts.

Reduced vibration also increases reliability and tool/machine life and can

reduce noise from the machining operation.

PRECISION LEVELERS AND FIXATOR MACHINERY JACKS

Vibration damping can be defined as the capacity of a mechanical system to

reduce the intensity of a vibratory process. Dynemech vibration isolation

solutions and leveling jacks lead to reduction of intensity of undesirable

resonances; acceleration decay(settling) of transient vibration excited by abrupt

changes in motion parameters of mechanical components; prevention or

alleviation of self-excited vibrations; prevention of impacts between vibrating

parts when their amplitudes are reduced by damping; potential for increase in

efficiency due to reduced peak vibratory velocities of components having

frictional or micro impacting interactions; reduction of noise generation and of

harmful vibrations transmitted to human operators and surrounding building

structures.

Precision Leveling Jacks for accurate alignment of Long Bedded Lathes

The primary effect of increased damping in a structure through leveleing jacks

and leveling feet is a reduction of vibration amplitudes at resonances, with

corresponding decreases in stresses, displacements, fatigue and sound radiation.

DYNEMECH range of anti vibration machinery mounting systems including

wedge action leveling jack and machinery leveling shock mounts isolate all

kinds of vibration generated in the machinery and also buffer the machine

against vibrations travelling from the surrounding environments to the machine

itself.

Lathe leveling jacks and leveling mounts

Dynemech Wedge Jacks and machinery leveling shock mounts, Series

DT are designed for machines which are top heavy or have eccentric

motion or machines which must be anchored to the ground. They can be

used without insulation plates or lathe rubber pads for precision levelling

and alignment in all spatial axes along with centric anchoring. Series

DTO with single center hole improve alignment accuracy, rigidity and

stability in long bedded machinery both with and without machinery

rubber feet.

Dynemech Leveling Foot Mounts VHS Series is used for precision leveling

and aligning machinery to very strict tolerances and makes it possible to vary

adjustments at any time, even under maximum loads requiring only a small

hand wrench to adjust.

Dynemech's Lathe Machinery Leveling Jacks DTH Series mounts are

designed for Lathe machines which require high height adjustment and critical

precision levelling and alignment. They have a large leveling range with sturdy

dimensional parameters.

Dynemech Lathe shock mounts TPM Series Mounts have a height of

100mm/150 at mean position to help proper cleaning and repairing under the

machine as per TPM guidelines for machine installation by IMTMA. Vibration

reduction is possible through assembling respective Dynemech insulation

plates.

For further details contact :

Dynemech Systems Pvt. Ltd.

Ph:9810760131,9911145131

www.vibrationmountsindia.com