Upload
plegelone764
View
198
Download
4
Embed Size (px)
Citation preview
LED Christmas Palm Tree -Favorite Motif on Decorating For Your Christmas Holiday Break
The smell of Christmas cakes, garland, sight of the cool Christmas tree and the
sound of Christmas carols serenading us are indications that Christmas holid-
ay is coming near. Families are getting involved with all the pre-plannings for
this precious time of the year.
Furnishing the house is one of the toughest things to carry out and being inn-
ovative is a key factor for a successful Christmas decoration. Using LED Christ-
mas lights can improve your home and make your Christmas decoration more vibrant which is the true
meaning of the season. So this holiday season have to be a most joyous time to share with your loved
ones.
In this season of the year you can find many forms of decorative LED Christmas lights in many home
accessory centers. There are icicle lights, the conventional mini lights and mesh style lights that are
widely used to wrap around a tree trunk.
You can also find many colors available that will suit your preference from clear white to shaded bulbs
and those that blink, chase and stay lit. The best decoration and style of home depends on your taste
and what appearance you want. It also will lie upon how much you would want to to spend on your LED
Christmas lights and other decorations.
It is ideal to look for light strings that have male and female receptacles in each ends. In this manner it is
easier to route because you can also connect two strings from end to end.
In the case of a tiny light, it is better to choose strings which have 50 bulbs than those with 100 to 200
bulbs because you can get new ones a string when defective or not functioning well. No matter what
kind of Christmas lights you'll choose, be sure to go for those that are UL-approved and take extra care
on manufacturer's manuals on the package.
Below are some tips on how you can hang LED Christmas lights:
1. Find an appropriate electrical receptacle for the lamps and get a heavy duty extension cords that are
actually 120-volt electrical outlet and insulated by a ground fault circuit interrupter. Use a regulated
switch outlet with an automatic time regulator that turns on at dusk and turns off late night.
2. Have a long measuring tape, measure the length of the place from the bottom and its tallness, or trees
and bushes you want to put your bulbs on. Measure the needed length of strings that you need to use.
3. Prior to plugging your LED Christmas lamps, visually observe and inspect them for damaged bulbs and
defective wires. If there are broken bulbs, substitute new ones. Remember to use safety gloves and long-
nose pliers when pulling out a bulb. After replacing the bulbs right now you can plug them and try out
the string again. If the series didn't operate, check if the fuse had blown.
4. Use a step ladder if your home's eaves are low or you can also use an extension ladder. Remember to
place it steadily on ground level and against the eaves so that it can be stable and can support your
weight.
5. Hang up the lights along the eaves and make use plastic clips, these clips hold gutters and have lock
that can hold a light string or a wire.
6. When hanging light strings to a window trim or any other vertical places, remember to use rubberized
clips that have screws and place them 12 inches apart. You should not use nails and staples because
doing so can harm the wires which could lead to electrical hazards.
Christmas is time to shine. Make sure to be creative in selecting and decorating your LED Christmas
lights. Make sure to fill your place with Christmas lights and let it be the shiniest home around your
community.