LED Products Catalogue

Energy Efficient LED lights

LED Street Lights

LED Tube Lights

LED Down Lights

LED Spot Lights

LED High bay Light

LED Panel Lights

LED Flood Lights

LED Globes

Sales: Technical: Address: Web:

Tel: 012 819 1353 Cell: 078 5177 877 sales@carima.co.za Marnes: Tel: 012 819 1353, Cell: 082 68 48 186, info@carima.co.za 212 Sysie road, Derdepoort, Pretoria www.carima.co.za

LED Lights – The future of lighting

LED - Light Emitting diodes are electronic devices that converts electricity into light. LED lights are more energy efficient and longer lasting than traditional lights and are suited to residential, commercial and industrial lighting purposes. As LED lights emit less heat than conventional light bulbs, less energy is wasted which makes them easier on your electricity bill.

Advantages of LED lights: Save on electricity usage and cost LED Lights uses 65% less electricity compared to florescent lights, and 90% less electricity compared to incandescent lights.

Save on lamp replacement cost The operational life of LED lamps is 30 000 to 50 000 hours. That works out to 4 -6 years of continuous operation, or 8 -12 years of 50% operation. The long operational life of a LED lamp is a stark contrast to the average life of an incandescent bulb, which is typically 2000 hours and fluorescent which is typically 6000 hours. Thus on average LED lights last 15 times longer than incandescent lamps and 5 times longer than fluorescent lamps.

Save on maintenance and labour Due to the long operation life of LED lights, means it need replacing much less often than fluorescent of incandescent lights. This can mean a big saving on maintenance and labour cost, especially if special equipment is needed to replace lamps such as high bay lamps or street lamps.

Return on investment Although the initial cost might be slightly higher than that of a traditional incandescent and fluorescent bulbs, the extra cost will be repaid within two years from electricity savings, and the bulbs should not need replacement for 10 years.

Save on operating cost Save up to 40% in total operating cost, considering the savings in electricity, labour and replacement costs

Mercury-free - unlike fluorescent and most HID technologies, LEDs contain no hazardous mercury or halogen gases

High efficiency - LEDs are now available that reliably offers over 100 lumens from a one-watt device, and even much higher outputs at higher drive currents

Small size - provides design flexibility, arranged in rows, rings, clusters, or individual points

High durability - no filament or tube to break.

LED Compared to traditional florescent lights

LED Tube Lights

Replaces regular fluorescent tube lights

LED tube compared to regular fluorescent tube

LED Tube Regular Fluorescent Tube

Power Consumption 18W 40W

Life Span 50000Hrs 6000Hrs

UV Radiation No Yes

Ra 80% Plus Round 30%

Working Temperature 50 120

Ballast No Yes

Starter No Yes

Operating Frequency No Flickering 50-60Hz

Light-on Time 0.4S 3S-5S

Colour Purity High Low

Save electricity usage and cost Uses 65% less electricity compared to florescent lights.

Save on lamp replacement cost Lifetime of more than 50 000 h compared to 6 000

Save on labour Only needs replacing every 10 years compared to annually.

Break even after only 2.9 years Recover you initial investment after 2.9 years.

Save up to 40% in total operating cost Considering electricity, labour and replacement costs.

Save electricity usage and cost Uses 65% less electricity compared to florescent lights. Save on lamp replacement cost Lifetime of more than 50 000 h compared to 6 000. Save on labour Only needs replacing every 10 years compared to annually. Break even after only 2.9 years Recover you initial investment after 2.9 years. Save up to 40% in total operating cost Considering electricity, labour and replacement costs.

Cost to benefit comparison between LED tube lights and fluorescent tube lights.

Example comparing 100 x 40 W fluorescent tube lights to equivalent 18 W LED tube lights

Variables used:  Number of lights: 100 lights Operating hours per day: 8 hours Number of days per year: 300 days Cost of electricity: 80c per kWh

LED lights initially cost 23 times more than fluorescent tube lights but...

LED Lights last 8 times longer than Incandescent lights.

LED lights use 55% less electricity than fluorescent lights.

That is an 39% saving in total operating costs.

R 20.00 

R 477.00 

R ‐ R 100.00  R 200.00  R 300.00  R 400.00  R 500.00  R 600.00 

Fluoresecnt

LED

Initial Cost per light

6 000 h

50 000  h

0 10 000 20 000 30 000 40 000 50 000 60 000

Flourescent

LED

Life Span in Hours

R 148.77 

R 66.73 

R ‐ R 20.00  R 40.00  R 60.00  R 80.00  R 100.00  R 120.00  R 140.00  R 160.00 

Flourescent

LED

Electricity Cost per year

R 180.76 

R 110.73 

R ‐ R 20.00  R 40.00  R 60.00  R 80.00  R 100.00  R 120.00  R 140.00  R 160.00  R 180.00  R 200.00 

Flourescent

LED

Total operating costs per tube, per year

LED Street Lights

Energy saving LED street lights, utilizes high power LED’s as a light source. These state of the art LED street lights can be directly connected with an 85-264 VAC power supply or alternatively it can be powered by an optional Solar Panel Kit. The following factors make LED lights a “greener” option than traditional florescent lights: • low power consumption • a lifespan of up to 50 000 hours and • no hazardous chemicals such as phosphorous vapours, lead or mercury

Day light (left) & Night LED Light (right)

LU1 75W power consumption. Replaces 250W High Pressure Sodium (HPS) lamp. Luminous flux 2 100 lm

LU2 75W power consumption. Replaces 250W High Pressure Sodium (HPS) lamp. Luminous flux 4 200 lm

LU4 150 watt power consumption. Replaces 250 watt High Pressure Sodium (HPS) Lamp. Luminous Flux 8 400 lm

LU6 225 watt power consumption. Replaces 400watt High Pressure Sodium (HPS) lamp. Luminous Flux 12 800 lm

Our LED street lights can easily be adapted to run from solar power.

SP90 Light bulb 36 watt power consumption. Replaces 75/150W High Pressure Sodium (HPS) lamps. Luminous flux 2100 lm For replacement in existing luminaires & LU1 luminaire

LED Tube Lights

Benefits: Work without ballast and starter. Save over 60% electricity cost in total. Connects directly to the 240 Volt AC power Fits in a standard fluorescent tube fitting Over 50,000 hours lifespan (that's more than 10

year at 12hour per night!). Input voltage can be 24V DC or 240V AC. Eco-friendly (No dangerous metals or gasses

such as mercury vapour)

LED compared to Fluorescent: 8 W LED = 20 W Fluorescent 12 W LED = 30 W Fluorescent 18 W LED = 40 W Fluorescent 24 W LED = 56 W Fluorescent 28 W LED = 65 W Fluorescent 36 W LED = 85 W Fluorescent

Models and specifications

Product Code

Power consumption

Lumens Size Width Double Sided

T8-09-2 9 Watt 660 lm 600mm (2 feet) 30mm No

T8-18-4 18 Watt 1600 lm 1200mm (4 feet) 30mm No

T8-24-5 22 Watt 2100 lm 1500mm (5 feet) 30mm No

T16-18-2 18 Watt 600mm (2 feet) 30mm Yes

T16-22-4 22 Watt 1200mm – (4 feet) 30mm Yes

LED Tube Fitting We stock a range of LED tube fittings. These fittings is very cost effective as there is no electronic starters or ballasts. LED tubes connects directly to 220V.

Product Code

Description

F2-1 600mm (2 feet) - Single

F2-2 600mm (2 feet) - Double

F4-1 1200mm (4 feet) - Single

F4-2 1200mm (4 feet) - Double

F5-1 1500mm (5 feet) - Single

F5-2 1500mm (5 feet) - Double

LED Spot Lights

Product Code

MR16 SP50 SP70 SP80B SP80

Power Consumption

3 Watt 5 Watt 10 Watt 15 Watt

Lumens 170 lm 190 lm 250 lm 500 lm 750 lm

Incandescent Equivalent

25 Watt 25 Watt 40 Watt 75 Watt 100 Watt

Dimensions ᴓ 50mm x 45mm

ᴓ 50mm x 71mm ᴓ 70mm x 99mm ᴓ 80mm x 159mm ᴓ 80mm x 200mm

Luminescence Angle

30° 120°

Working Voltage

12 V AC/DC 12, 24 V AC/DC or 85 – 264 VAC

Emission Colour

Pure White, Warm White, Red, Yellow, Green or Blue Pure White or Warm White

Colour Temperature

Pure White 5 000 – 7 000 K, Warm White 3 000 – 4 000 K

Lamp Lens Acrylic

Lamp Cup Radiator

Aluminium Alloy

Lamp Base GU 5.3 E27, E14, GU 10 E27

Certification CE, RoHs CE, RoHs, UL CE, RoHs

LED Flood Lights

Applications Factories Gymnasiums Security lighting Billboard illumination Etc

Features: Natural colour Tough And Durable Toughened Glass Cover Life span > 50,000 Hours Single High Powerful LED Light Source Die-cast aluminium housing for strength Vacuum Metallic-Membrane Plating

Reflector

Specifications Light source: Single Ceramic LED Array Input voltage: 12 VDC or 200 – 265 VAC Material: Aluminium alloy body with glass

cover Insulation Grade: Class 1 Protection Grade: IP65 Working Environment: -40~55 degrees Colour Temperature: 5500 Kelvin Colour Renden of Index : >80 Ra Beam Angle: 50 Degrees Light Efficiency: >90%

Models and specifications

Product Code FL10 FL20 FL50

Power consumption 10 Watt 20 Watt 50 Watt

Size L x W x H (mm) 115 x 86 x 86 220 x 190 x 130 290 × 236 × 183

Weight (kg) 2.3 3.5

Lumens 850 lm 1700 lm 4 250 lm

LED panel lights

Applications Replacement for traditional fluorescent lights. Offices Classrooms Museums Airports Art galleries

Specifications Colour: Warm White/Cool White Colour Temperature: 2800K-6500K Voltage: AC 90~264V LED Source: Taiwan

Lumenmax,SMD3014 Beam Angle: 120 degree

Models and specifications

Product Code PL300x300 PL300x300B PL300x600 PL600x600

Power consumption 15 Watt 15 Watt 40 Watt 80 Watt

Size L x W x H (mm) 300 x 300 x12 300 x 300 x12 600 x 600 x12 600 x 600 x12

Lumens 900 lm 900 lm 2700 lm 4700lm

Battery backup No Yes No No

LED Lights Information

Fitting Types All lights is available in various different fitting types. (On request and in large quantities)

Colour Preference Warm White (same colour as traditional light bulbs) Pure White (same colour as traditional fluorescent lights)

Voltage Most lights are available in either 12 V DC or 240 V AC

Warranty Statement Carima Products warrants all newly purchased products to be completely free from any defects or faults. This warranty will be valid for a period of two years from date of purchasing from Carima Products or any of its approved distributors. This warranty includes all repair work on the products and replacement of components as Carima Products may find to be necessary after thorough inspection of faulty due to improper installation. Any faulty product will be covered and repaired under warranty, which is delivered at Carima Products workshop in Derdepoort, Pretoria or to any of their designated agent/distributor countrywide. The warranty does not cover any shipping costs or labour charges by any other company, for removal and installation of the products. Carima Products will only take responsibility for installations done by their own qualified technicians or approved contractors. No responsibility will be taken for faults arising from either any other installation done by the client itself or any unauthorized agent. Proper proof of purchase must be provided with any warranty claim submitted to this company. This is the only valid warranty agreement and will Carima Products not take any responsibility for damages or losses that might arise from any defects or faults on products.

For any enquiries contact us: Sales: Technical: Address: Web:

Tel: 012 819 1353, Cell: 078 517 7877, sales@carima.co.za Tel: 012 819 1353, Cell: 082 68 48 186, info@carima.co.za 212 Sysie road, Derdepoort, Pretoria www.carima.co.za