Click here to load reader
Upload
dinhhanh
View
214
Download
2
Embed Size (px)
Citation preview
LEIA QCF NVQ EOR Summary
Document Reference
NVQ‐EORSumm
LEIA EOR Basic Safety Units Summary NVQ‐EORSumm.doc
Issue Nº 2 Revision Date 12/06/15 Next Review Date June 2016
EOR/202 Basic Lift Safety
EOR/203 Basic Stairlift Safety
EOR/204 Basic Escalator Safety
EOR/205 Basic Service Lift Safety
EOR/206 Basic Platform Lift Safety
For all qualifications:
Working safely in an engineering environment; Performance to be assessed and evidenced:
1. Comply with your duties and obligations as defined in the Health and Safety at Work Act 1974
2. Apply safe working practices and procedures at all times
3. Follow organisational accident and emergency procedures
4. Recognise and control hazards in the workplace to minimise risks
5. Use correct manual/mechanical lifting and carrying techniques
Plus at least ONE of the following:
EOR/202 Basic Lift Safety
6. Safely operate lifts taking into account all safety precaution/practices and follow established
procedures including:
a. access to lift areas e.g. machine rooms, car tops, pits, pulley rooms
b. using car top controls, emergency electrical recall controls
c. safe release of trapped lift passengers under supervision
EOR/203 Basic Stairlift Safety
6. Safely operate stairlifts taking into account all safety precaution/practices and follow established
procedures including:
a. access to workplace and equipment areas e.g. security of fixtures/fittings, electrical supply
and control, loose cables, unsecured flooring, leakages.
b. safe operation of stairlifts e.g. use of controls, braking, stop/start position, safety edge/pads.
EOR/204 Basic Escalator Safety
6. Safely operate escalators taking into account all safety precaution/practices and follow established
procedures including:
a. access to escalator and moving walk areas e.g. landings and outside the step band/pallet
band; driving and return stations, machinery spaces, truss, inside step band/pallet band
b. safe operation of escalator e.g. use of hand held pendant controls, braking, stop/start
position and remote emergency stop, step to step clearances, step to skirting clearances,
comb to plate clearances, handrail operation and entry points
LEIA QCF NVQ EOR Summary
Document Reference
NVQ‐EORSumm
LEIA EOR Basic Safety Units Summary NVQ‐EORSumm.doc
Issue Nº 2 Revision Date 12/06/15 Next Review Date June 2016
EOR/205 Basic Service Lift Safety
6. Safely operate service lifts taking into account all safety precaution/practices and follow established
procedures including:
a. remove service lift from normal service e.g. to gain access to service lift areas
b. access to service lift areas e.g. machine compartment, car tops, pits
c. manually operate service lift
EOR/206 Basic Platform Lift Safety
6. Safely operate lifting platforms taking into account all safety precaution/practices and follow
established procedures including:
a. access to workplace and equipment areas e.g. security of fixtures/fittings, electrical supply
and control, loose cables, unsecured flooring, leakages.
b. safe operation of lifting platforms e.g. use of controls, braking, stop/start position, safety
edge/pads.
c. manually operate lifting platform equipment e.g. electro‐hydraulic lifts, electro – screw jack,
electro – rope drive with manual doors