Lg Tft-lcd Color Monitor Flatron l1550s-Sn, l1550s-Bn

  • View
    47

  • Download
    4

Embed Size (px)

DESCRIPTION

Schematic

Text of Lg Tft-lcd Color Monitor Flatron l1550s-Sn, l1550s-Bn

  • Model Description

    MODEL BRAND

    Printing Specification

    1. Trim Size (Format) : 215mm x 280 mm

    2. Printing Colors Cover : LG COLORS Inside : Black

    3. Stock (Paper) Cover : Snow White 150 g/ Inside : Snow White 100 g/

    4. Printing Method : 5. Bindery : Saddle stitch6. Language : English7. Number of pages : 28 (Including blank 1page)

    Part No.

    1.

    2.

    Service Guide SpecificationService Guide Specification

    Changes 4.

    REV.NO. MM/DD/YY SIGNATURE CHANGE NO. CHANGE CONTENTS

    1

    2

    3

    4

    5

    7

    6

    SUFFIX

    LEE H.J05.03.18

    L1550S-SNNL1550S-BNN LG 3828TSL094N

    KIM J.O05.03.18

    (1) Origin Notification* LGEDI : Printed in Indonesia * LGEWA : Printed in U.K.* LGESP : Printed in Brazil * LGEMX : Printed in Mexico* LGENT : Printed in China * LGEIL : Printed in India

    8

    Special Instructions3.

    Product Name FLATRON L1550S-SNFLATRON L1550S-BNANAUER

  • Pagination sheetPagination sheet P/NO.3828TSL094NTotal pages :28pages

    CoverEnglish

    2

    English

    3

    English

    4

    English

    .

    English

    ..

    Rear Cover

    Front coverInside

    blank

    English

    .

    English

    22

    English

    23

    English

    24

    English

    25

    Rear coverInside

    26

  • COLOR MONITORSERVICE MANUAL

    Website:http://biz.LGservice.comE-mail:http://www.LGEservice.com/techsup.html

    CAUTIONBEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

    CHASSIS NO. : CL-82MODEL: L1550S-SN (L1550S-SNN.AB**EP,AN**EP)

    L1550S-BN (L1550S-BNN.AB**EP,AN**EP)( ) **Same model for Service

    *To apply the MSTAR Chip.

  • - 2 -

    CONTENTS

    SPECIFICATIONS ................................................... 2PRECAUTIONS ....................................................... 3TIMING CHART ....................................................... 7DISASSEMBLY ....................................................... 8BLOCK DIAGRAM ................................................... 9DESCRIPTION OF BLOCK DIAGRAM....................10ADJUSTMENT ...................................................... 12

    SERVICE OSD ...................................................... 13TROUBLESHOOTING GUIDE .............................. 14WIRING DIAGRAM ............................................... 18EXPLODED VIEW...................................................19REPLACEMENT PARTS LIST ...............................21 SCHEMATIC DIAGRAM......................................... 23

    1. LCD CHARACTERISTICSType : TFT Color LCD ModuleActive Display Area : 15 inchSize : 326.5(W) x 253.5(H) x 11.2(D)Pixel Pitch : 0.297 (H) x 0.297 (V)Color Depth : 6bit with FRC, 16M clolorsElectrical Interface : LVDSSurface Treatment : Hard-coating(3H), Anti-GlareOperating Mode : Normally White, Transmissive modeBacklight Unit : 2-CCFL

    2. OPTICAL CHARACTERISTICS2-1. Viewing Angle by Contrast Ratio 10CPT TNLeft : 60min. Right : 70(Typ)Top : 50min., 60(Typ) Bottom : 55min., 65(Typ)LPL TNLeft : 55min., 65(Typ) Right : 55min., 65(Typ)Top : 40min., 45(Typ) Bottom : 50min., 55(Typ)2-2. Luminance : 200(min), 250(Typ)

    2-3. Contrast Ratio : 300(min), 400(Typ)

    3. SIGNAL (Refer to the Timing Chart)3-1. Sync Signal

    Type : Separate Sync.

    3-2. Video Input Signal1) Type : R, G, B Analog2) Voltage Level : 0~0.71 Va) Color 0, 0 : 0 Vp-pb) Color 7, 0 : 0.467 Vp-pc) Color 15, 0 : 0.714 Vp-p

    3) Input Impedance : 75

    3-3. Operating FrequencyHorizontal : 30 ~ 63kHzVertical : 56 ~ 75Hz

    4. Max. ResolutionD-sub Analog : 1024 x 768@75Hz

    5. POWER SUPPLY

    5-1. Power : AC 100~240V, 50/60Hz , 1.0A

    5-2. Power Consumption

    6. ENVIRONMENT

    6-1. Operating Temperature : 10C~35C 6-2. Relative Humidity : 10%~80%6-3. MTBF : 50,000 HRS with 90%

    Confidence levelLamp Life : 40,000 Hours(Min)

    7. DIMENSIONS (with TILT/SWIVEL)

    Width : 356.8 mm (14.05'')Depth : 151.7 mm (5.97'')Height : 359.8 mm (14.17'')

    8. WEIGHT (with TILT/SWIVEL)

    Net. Weight : 4.1 kg (9.04 lbs)Gross Weight : 5.0 kg (11.02 lbs)

    SPECIFICATIONS

    MODEPOWER ON (NORMAL)

    STAND-BYSUSPENDDPMS OFF

    H/V SYNC

    ON/ONOFF/ONON/OFF

    OFF/OFF

    POWER CONSUMPTIONless than 25 W

    less than 1 Wless than 1 W

    less than 1 W

    LED COLORGREENAMBER

    AMBER

    AMBER

    VIDEO

    ACTIVEOFFOFFOFF

  • - 3 -

    WARNING FOR THE SAFETY-RELATED COMPONENT.

    There are some special components used in LCDmonitor that are important for safety. These parts aremarked on the schematic diagram and thereplacement parts list. It is essential that these criticalparts should be replaced with the manufacturersspecified parts to prevent electric shock, fire or otherhazard.

    Do not modify original design without obtaining writtenpermission from manufacturer or you will void theoriginal parts and labor guarantee.

    TAKE CARE DURING HANDLING THE LCD MODULEWITH BACKLIGHT UNIT.

    Must mount the module using mounting holes arrangedin four corners.

    Do not press on the panel, edge of the frame stronglyor electric shock as this will result in damage to thescreen.

    Do not scratch or press on the panel with any sharpobjects, such as pencil or pen as this may result indamage to the panel.

    Protect the module from the ESD as it may damage theelectronic circuit (C-MOS).

    Make certain that treatment persons body aregrounded through wrist band.

    Do not leave the module in high temperature and inareas of high humidity for a long time.

    The module not be exposed to the direct sunlight. Avoid contact with water as it may a short circuit within

    the module.

    If the surface of panel become dirty, please wipe it offwith a softmaterial. (Cleaning with a dirty or rough clothmay damage the panel.)

    WARNINGBE CAREFUL ELECTRIC SHOCK !

    If you want to replace with the new backlight (CCFL) orinverter circuit, must disconnect the AC adapterbecause high voltage appears at inverter circuit about650Vrms.

    Handle with care wires or connectors of the invertercircuit. If the wires are pressed cause short and mayburn or take fire.

    Leakage Current Hot Check Circuit

    PRECAUTION

    CAUTIONPlease use only a plastic screwdriver to protect yourselffrom shock hazard during service operation.

    1.5 Kohm/10W

    To Instrument'sexposed METALLIC PARTS

    Good Earth Groundsuch as WATER PIPE,CONDUIT etc.

    AC Volt-meter

  • - 4 -

    SERVICING PRECAUTIONSCAUTION: Before servicing receivers covered by thisservice manual and its supplements and addenda, readand follow the SAFETY PRECAUTIONS on page 3 of thispublication.NOTE: If unforeseen circumstances create conflictbetween the following servicing precautions and any of thesafety precautions on page 3 of this publication, alwaysfollow the safety precautions. Remember: Safety First.

    General Servicing Precautions1. Always unplug the receiver AC power cord from the AC

    power source before;a. Removing or reinstalling any component, circuit

    board module or any other receiver assembly.b. Disconnecting or reconnecting any receiver electrical

    plug or other electrical connection.c. Connecting a test substitute in parallel with an

    electrolytic capacitor in the receiver.CAUTION: A wrong part substitution or incorrectpolarity installation of electrolytic capacitors mayresult in an explosion hazard.

    d. Discharging the picture tube anode.2. Test high voltage only by measuring it with an

    appropriate high voltage meter or other voltagemeasuring device (DVM, FETVOM, etc) equipped witha suitable high voltage probe.Do not test high voltage by "drawing an arc".

    3. Discharge the picture tube anode only by (a) firstconnecting one end of an insulated clip lead to thedegaussing or kine aquadag grounding system shieldat the point where the picture tube socket ground leadis connected, and then (b) touch the other end of theinsulated clip lead to the picture tube anode button,using an insulating handle to avoid personal contactwith high voltage.

    4. Do not spray chemicals on or near this receiver or anyof its assemblies.

    5. Unless specified otherwise in this service manual,clean electrical contacts only by applying the followingmixture to the contacts with a pipe cleaner, cotton-tipped stick or comparable non-abrasive applicator;10% (by volume) Acetone and 90% (by volume)isopropyl alcohol (90%-99% strength)CAUTION: This is a flammable mixture.Unless specified otherwise in this service manual,lubrication of contacts in not required.

    6. Do not defeat any plug/socket B+ voltage interlockswith which receivers covered by this service manualmight be equipped.

    7. Do not apply AC power to this instrument and/or any ofits electrical assemblies unless all solid-state deviceheat sinks are correctly installed.

    8. Always connect the test receiver ground lead to thereceiver chassis ground before connecting the testreceiver positive lead.Always remove the test receiver ground lead last.

    9. Use with this receiver only the test fixtures specified inthis service manual.CAUTION: Do not connect the test fixture ground strapto any heat sink in this receiver.

    Electrostatically Sensitive (ES) DevicesSome semiconductor (solid-state) devices can bedamaged easily by static electricity. Such componentscommonly are called Electrostatically Sensitive (ES)Devices. Examples of typical ES devices are integratedcircuits and some field-effect transistors andsemiconductor "chip" components. The followingtechniques should be used to help reduce the incidence ofcomponent damage caused