Embed Size (px)
Citation preview
SPECIF ICAT ION SUBMITTAL Page 1Job Name:
Job Number:
Model Numbers:
Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification
086-130 1 08.20.09
Lutron Tensioned Roller Shade
Lutron | Tensioned Roller Shade (4.75 inch frame)
Tensioned Roller shades utilize the ultra-quiet, precision controlled Drive. The tensioned roller shade Drive is housed inside the frame assembly and controls the movement of the shade, keeps track of the shade’s position, and adjusts to the user’s desired positions.
Aestheticst Fascia eliminates light gaps around fabric when closedt Concealed cable guides maximize view through skylight when opent Wide variety of high performance fabrics to enhance décort Fiberglass based fabrics available for sheer, dim-out,
and blackout Designt Unique tension-absorbing frame eliminates stress on the surrounding ceiling structuret Reliable performance under extreme temperatures
Controlt� Tensioned roller shades are compatible with QED, QS
and QS Wireless drive unitst Tensioned shade components designed for
ultra-quiet operation (will not exceed 44 dBA measured 3 ft (1 m) from the EDU)
Installationt Flexible installation from -135° to +135°t Inside, recessed, and surface mounting options allow system to fit a wide variety of skylight and
window applicationst Can be shipped pre-assembled or as components to maximize on-site installation convenience and time savings (Refer to SCT for your application).
SPECIF ICAT ION SUBMITTAL Page 2Job Name:
Job Number:
Model Numbers:
Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification
086-130 2 08.20.09
Shade optionsMounting optionsThe frame can be mounted inside of, recessed into, or outside of the window opening. It can also be mounted inside, or recessed into a window frame.
Fabric roll orientation Fabric unwinds from roller closest to the glass.
Drive side optionsDrive can be located on the left or right side of the shade.
Left drive side Right drive side
Hem barHalf-wrap hem bar
Regular roll
glass
Looking up
Skylight MountsInside Recessed Surface
Drive
Looking up
Window MountsInside Recessed
Fabric optionsTensioned roller shades are available in a wide variety of fabric types.Sheer – UV protection, translucent Dim-out – UV protection, minimal translucence Blackout – Maximum UV protection, complete light block NOTEFor complete fabric selection, please consult the SCT or customer service.
0˚ to 135˚(Angled Shade)
-1˚ to -135˚(Bottom-up Shade)
Installation angle
SPECIF ICAT ION SUBMITTAL Page 3Job Name:
Job Number:
Model Numbers:
Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification
086-130 3 08.20.09
Frame InformationSystem dimensionsSystem is concealed within its frame. Frame thickness and depth are standard regardless of system size.
Drive Side4.75 in (121 mm) 4.65 in
(118 mm)
2.25 in (57 mm)
2.25 in (57 mm)
Shipping optionsSystem ships pre-assembled (units up to 30 sq ft [2.8 sq m] ) or as components. (Refer to Lutron Shade Configuration Tool (SCT) for your application).
Angles of InstallationFrame can be installed at any angle between -135 and +135. It may be used for angled windows, skylights or bottom-up applications.
-135°
-90°
-45°
0°
45°90°
135°
Angled Shades
Skylight Shades
Bottom-up Shades
SPECIF ICAT ION SUBMITTAL Page 4Job Name:
Job Number:
Model Numbers:
Lutron® Tensioned Roller Shade (4.75 inch frame) Chassis Specification
086-130 4 08.20.09
24 in(610 mm)
96 in (2438 mm)
36 in(914 mm)
144 in(3658 mm)
Drive side (top)
Frame Thickness
Minimum system size: 24 in wide x 36 in long (610 mm wide x 914 mm long)
Maximum system size: 96 in wide x 144 in long (2438 mm wide x 3658 mm long)
Frame thickness:Drive end: 4.65 in (118 mm)Non-drive end and sides: 2.25 in (57 mm)
System parameters This chart illustrates general system dimensions of tensioned roller shade system. System contains frame and shade.
NOTETensioned roller shade dimension limitations are a function of fabric selection and application angle. Please consult the SCT or customer service for details.
