1
DEVELOPMENTS NEW EQUIPMENT, PROCESSES, & MATERIALS Drum Pump Finish Thompson Inc. Erie, Pa. The rugged PVDF, sealless drum pump (PFV) from Finish Thompson transfers a wide range of nonflamma- ble, aggressive chemicals. The PFV features a durable coupling design and an efficient double-suction impeller. Available in 27-, 40-, or 48-in. lengths, the pump transfers up to 40 gpm with heads to 80 feet. The maximum spe- cific gravity is 1.8 and maximum vis- cosity is 500 cps. Circle 401 on the reader service card Manual Spray Gun I7W DeVilbiss lndusfrial Spray Equipment Maumee, Ohio The JGHV Standard-Size Maximum Performer manual spray gun combines the comfortable fit and feel of ITW DeVilbiss’ classic JGA spray gun with the high-transfer efficiency and supe- rior atomization of high-volume low- pressure (HVLP) technology. Featur- ing the exclusive DeVilbiss GoldMax air cap and special fluid tip, needle, and baffle combination, the JGHV can apply a wide range of coatings includ- ing higher solids materials. The JGHV is easy to use and features light trigger action for easy operation and comfort, knurled knobs for easy adjustment of pattern and fluid flow, and a ‘h-in. air inlet, which connects to any standard compressor system. Circle 402 on the reader service card Air-Operated Pump Kremlin Inc. Addison, 111. Kremlin’s air-operated Airmix 17.25E pump is capable of feeding one or two guns for heavy-duty applica- tion. It can eliminate up to 80% of overspray and cut material consump- tion by as much as 40% or more. It is designed to feed manual, automatic, and electrostatic spray guns and is ca- pable of handling materials such as lacquers, varnish, primers, epoxy, ad- hesives, and more. The pump is avail- able in a standard or stainless steel version. Circle 403 on the reader service card Trivalent Chromium Plating Anodes Frederick Gumm Chemical Co. Kearny, N. J. Envirochrome EC 10 anodes have been specially designed for use in Gumm’s trivalent chromium plating system. The use of these specially coated anodes allows these baths to be operated without the need for the spe- cial anode box previously required. Use of these anodes greatly reduces bath maintenance, while at the same time, increases the throwing power of the bath. Circle 404 on the reader service card PVC Ductwork KCH Services Inc. Forest City NC KCH Services has received Factory Mutual approval for its polyvinyl chlo- ride (PVC) ductwork as a feasible al- ternative to fiberglass reinforced plas- tic (FRP) ductwork. As a result, the need for fire sprinklers in PVC duct- work is nonexistent. The new KCH unplasticized PVC duct does not bum readily. It softens and melts under the heat of the fire, causing the PVC duct to collapse onto itself, starving the fire. The PVC is an inert, homogenous ma- terial extruded into uniform sheets and/or various shapes that can be formed, cut, machined, heat welded, or solvent welded with no change in physical or corrosion-resistant proper- ties. Circle 405 on the reader service card Water-Based Coatings Magni Group Inc. Birmingham, Mich. Magni Series W41 single-compo- nent coatings have extremely low VOCs. Application is by conventional spray or dip/drain. The coatings can be applied over clean, bare steel, or phos- phate. Cure is quick in ambient air. At low heat (150 to 200°F) they dry in seconds to a tack-free finish. The typ- ical recommended film build for W41 is 2 mils, where the coating delivers 500 hours of salt spray protection. Magni W41 coatings are black and are formulated in low to high gloss. They are flexible, chip-resistant, and moder- ately heat-tolerant in service. Circle 406 on the reader service card 82 METAL FINISHING . SEPTEMBER 1996

Manual spray gun

Embed Size (px)

Citation preview

DEVELOPMENTS NEW EQUIPMENT, PROCESSES, & MATERIALS

Drum Pump Finish Thompson Inc. Erie, Pa.

The rugged PVDF, sealless drum pump (PFV) from Finish Thompson transfers a wide range of nonflamma- ble, aggressive chemicals. The PFV features a durable coupling design and an efficient double-suction impeller. Available in 27-, 40-, or 48-in. lengths, the pump transfers up to 40 gpm with heads to 80 feet. The maximum spe- cific gravity is 1.8 and maximum vis- cosity is 500 cps.

Circle 401 on the reader service card

Manual Spray Gun I7W DeVilbiss lndusfrial Spray Equipment Maumee, Ohio

The JGHV Standard-Size Maximum Performer manual spray gun combines the comfortable fit and feel of ITW DeVilbiss’ classic JGA spray gun with the high-transfer efficiency and supe- rior atomization of high-volume low- pressure (HVLP) technology. Featur- ing the exclusive DeVilbiss GoldMax air cap and special fluid tip, needle, and baffle combination, the JGHV can apply a wide range of coatings includ- ing higher solids materials. The JGHV is easy to use and features light trigger action for easy operation and comfort, knurled knobs for easy adjustment of pattern and fluid flow, and a ‘h-in. air

inlet, which connects to any standard compressor system.

Circle 402 on the reader service card

Air-Operated Pump Kremlin Inc. Addison, 111.

Kremlin’s air-operated Airmix 17.25E pump is capable of feeding one or two guns for heavy-duty applica- tion. It can eliminate up to 80% of overspray and cut material consump- tion by as much as 40% or more. It is designed to feed manual, automatic, and electrostatic spray guns and is ca- pable of handling materials such as lacquers, varnish, primers, epoxy, ad-

hesives, and more. The pump is avail- able in a standard or stainless steel version.

Circle 403 on the reader service card

Trivalent Chromium Plating Anodes Frederick Gumm Chemical Co. Kearny, N. J.

Envirochrome EC 10 anodes have been specially designed for use in

Gumm’s trivalent chromium plating system. The use of these specially coated anodes allows these baths to be operated without the need for the spe- cial anode box previously required. Use of these anodes greatly reduces bath maintenance, while at the same time, increases the throwing power of the bath.

Circle 404 on the reader service card

PVC Ductwork KCH Services Inc. Forest City NC

KCH Services has received Factory Mutual approval for its polyvinyl chlo- ride (PVC) ductwork as a feasible al- ternative to fiberglass reinforced plas- tic (FRP) ductwork. As a result, the need for fire sprinklers in PVC duct- work is nonexistent. The new KCH unplasticized PVC duct does not bum readily. It softens and melts under the heat of the fire, causing the PVC duct to collapse onto itself, starving the fire. The PVC is an inert, homogenous ma- terial extruded into uniform sheets and/or various shapes that can be formed, cut, machined, heat welded, or solvent welded with no change in physical or corrosion-resistant proper- ties.

Circle 405 on the reader service card

Water-Based Coatings Magni Group Inc. Birmingham, Mich.

Magni Series W41 single-compo- nent coatings have extremely low VOCs. Application is by conventional spray or dip/drain. The coatings can be applied over clean, bare steel, or phos- phate. Cure is quick in ambient air. At low heat (150 to 200°F) they dry in seconds to a tack-free finish. The typ- ical recommended film build for W41 is 2 mils, where the coating delivers 500 hours of salt spray protection. Magni W41 coatings are black and are formulated in low to high gloss. They are flexible, chip-resistant, and moder- ately heat-tolerant in service.

Circle 406 on the reader service card

82 METAL FINISHING . SEPTEMBER 1996