Click here to load reader
Upload
sheh69
View
63
Download
1
Embed Size (px)
DESCRIPTION
Configuring Dlink Modem for Streamyx
Citation preview
Technical Support Setup Procedure
Manually Configuring PPPoA Connection on the DSL-2750U
Step 1: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar type in the LAN IP Address of the DSL-2750U which is 192.168.1.1 and then press on the Enter
key on your keyboard.
Step 2: A login screen will appear, type in the User Name and the Password as “admin” all in lower
case and then type in Validate Code and then click on the Log In button.
Step 3: Click on the SETUP tab and then select on Internet Setup on the left hand side. Under the
WAN Setup, click on the button Add.
Step 4: Under the ATM PVC CONFIGURATION, configure the following;
VPI: Enter the VPI provided by your Internet Service Provider (ISP)
VCI: Enter the VCI provided by your Internet Service Provider (ISP)
Note: ISP’s VPI and VCI value, please refer to the following.
ISP VPI VCI Note
Singnet 0 100
Pacnet 0 100
TRUE 0 100
TOT 1 32
TT&T 0 33
BuddyBB 0 35
Streamyx 0 35
Maxis 0 35
Jaring 0 35
TelkomSpeedy 0 35
Please ask Telkom 147 for further info
at your area ADSL setting. (e.g. ATM
PVC Configuration, Service Category,
Connection Type, Encapsulation Mode)
Step 5: Under the CONNECTION TYPE, select PPP over ATM (PPPoA) on the drop down menu for
Protocol and then select VC/MUX on the drop down menu for Encapsulation Mode.
Step 6: Enter the Username and the Password provided by your Internet Service Provider (ISP)
under the PPP USERNAME AND PASSWORD section.
Note: For ISP’s Username format, please refer to the following. If you do not have any idea
on what’s your username and your password please do try to contact your Internet Service
Provider (ISP).
ISP Username Format
Singnet
Username@singnet Username@singnet1500 Username@singnetbusiness
Pacific Internet
[email protected] Username@pacnet1500
LGA [email protected] Qala [email protected]
Streamyx Username@streamyx [email protected]
Step 7: Click on Next button to continue.
Step 8: Click on Apply button to save the settings.