24
USING MAPPER TO VERIFY NEIGHBOR RELATIONS WITH MAPINFO Elaborated by Gabriel Colorado inCode Telecom Group, Inc.

Mapper Tutorial

Embed Size (px)

Citation preview

Page 1: Mapper Tutorial

USING MAPPER TO VERIFY NEIGHBOR RELATIONS WITH MAPINFO

Elaborated by Gabriel Colorado inCode Telecom Group, Inc.

Page 2: Mapper Tutorial

Mapper – Map Basic tool to display Neighbors in MapInfo

TABLE OF CONTENTS �

��������������� ��������� �������������������������������������������������������������������������������������������������������������������������������������������������������������������� ������������������������������������������������������������������������������������������������������������������������������������������������������������������ ������������� ��������������������������������������������������������������������������������������������������������������������������������������������������������������� ��������� ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� ����� ��� ��������������������� ����������������������������������������������������������������������������������������������������������!�� ����� ��"��� � ��#���� � ����������������������������������������������������������������������������������������������������������������������������������������$%�"��� � ��&��������'��� � ������������������������������������������������������������������������������������������������������������������������������������������$(��)��* ���'�� ��"��� � ��� +�����������������������������������������������������������������������������������������������������������������������������������$,�� ���� � �����-� ������ �������������������������������������������������������������������������������������������������������������������������������������������.��

Page 3: Mapper Tutorial

Cell Sites and Handover Files

Cell Sites text file

Gather all the cell site information described by the headers of this text file. This file should be TAB separated. In order to see iRAT neighbors, the GSM network should be loaded as well

Page 4: Mapper Tutorial

Handover Text File

This Handover table is built from the ADJCELL table coming from many sources: ASSET3G, RF Template (Bulk Export) or the GSM BSC dumps. The cell IDs should match the ones refer in the previous file under the header MTX_Site_ID and must be alphanumeric. Please follow the format of the files attached with this document as examples.

Page 5: Mapper Tutorial

Loading Mapper

Open MapInfo then click on “Tools” and select “Run Map Basic Program…”

Page 6: Mapper Tutorial

Choose the file “Mapping.mbx”. A new menu named “Mapper” will show in the main menu.

Page 7: Mapper Tutorial

Creating Cellular Symbols from the Cell Site txt file.

Once Mapper is loaded, click on “Import or Convert Cell Sectors”

Page 8: Mapper Tutorial

Choose the text file built with the network information. This is the one referred as Cell Site txt file. Tips: These are the valid ranges for the following headers in such a file: MTX_Site_ID: (Alphanumeric). The “G” denotes GSM and the “U” UMTS. This is not a must. Azimuth : 0 to 360 Beamwidth : 0 to 360 Radius : (meters) To display co-located sites from different technologies, a different radius should be assigned to these MTX_Site_ID in order to see them as different objects in the Map window.

Once “open” is selected, the drawing process starts.

Page 9: Mapper Tutorial

This is a typical Map window generated once Mapper has read properly the information contained in the cell site text file.

Page 10: Mapper Tutorial

Loading the Neighbor Relations

The text file containing the handover table needs to be saved as TAB file.

Page 11: Mapper Tutorial

Choose the file ending in “HO”. The type is delimited ASCII.

A second window pops up. Delimiter should be set to “Tab” and check box “Use First Line for Column Titles”

Page 12: Mapper Tutorial

This is the table open from the txt file with the NL.

Close the table created since it needs to be reopened with “Mapper”

Page 13: Mapper Tutorial

Go to “Mapper” and click on “Load Per Cell Pair Table”

Page 14: Mapper Tutorial

Choose the TAB file created previously.

Page 15: Mapper Tutorial

Now “Mapper” has allocated these neighbor relations and associated them with the Cell Site file by the Cell IDs (field “MTX_Site_ID”)

Page 16: Mapper Tutorial

Neighbor Displaying Options

Follow this snapshot to modify the Neighbor Displaying Options.

Page 17: Mapper Tutorial

These preferences are strongly recommended to see the neighbors of certain cell properly.

Halo and Bold are two features that enhance the way the labels are written on top of the cellular symbols.

Page 18: Mapper Tutorial

Switching On the Neighbor lookup

Go to “Mapper”

Page 19: Mapper Tutorial

Click on “Intra Switch On”

Page 20: Mapper Tutorial

Choose as pointer the arrow “Select”. This pointer is the actual tool that you would use to see the neighbors when selecting certain cell.

Page 21: Mapper Tutorial

Once a cell has been clicked on, the visualization and labeling process starts

Page 22: Mapper Tutorial

This is a typical neighbor view for the cell selected by the pointer which is in the one with red dashes. If you want to use the pointer to select any other object in MapInfo turn off the Intra Switch just by toggling it, otherwise “Mapper” will end unexpectedly.

Page 23: Mapper Tutorial

Loading other MapInfo tables

To load other MapInfo tables into the current workspace, select the tables and choose as preferred view “Current Mapper”

Page 24: Mapper Tutorial

Then, make sure the two tables “PCPData” (created when the Handover table was loaded) and “Cell_Sites” are on top of all the rest of tables. If these two are not on top of everything “Mapper” will end unexpectedly.