Embed Size (px)
Citation preview
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Fast-Fit Track Specification Sheet
Fast-Fit Cubicle Track
Cubicle Curtain Track – General Manufacture Reference: Marlux® Fast Fit Track System (Formerly Resistoid Cubicle Track) Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: +44 (0) 121 783 5777 Fax: +44 (0) 121 783 1117 email: [email protected]
Product reference: Fast-Fit cubicle curtain track. Material: Aluminium Bends: Factory pre-formed Colour/Finish: White powder coated Operation: Manual Track height: Approximately 2100mm (82.7”) above finished floor level Support units: C400 single support units screwed twice through suspended ceiling to
plywood pad above ceiling tile (plywood pads supplied by others). Addi-tional ceiling grid supports by others
Optionally - C400 single vertical support unit fixed through a suspended
ceiling directly fixed back to the structural slab, utilising the C22F & C24F false ceiling rose assembly.
Lateral stability: Limit the use of C600 ‘V’ shaped support units by direct wall fixing or
bracing using ‘dummy tracks’ to either walls or adjacent cubicle tracks where possible.
C600 ‘V’ Shaped support units where necessary; screwed twice through
ceiling to plywood pad above ceiling tile (plywood pads supplied by oth-ers). Additional ceiling grid supports by others
Optionally - C500 single vertical support available for angled applications. Accessories: Standard brackets/fixings. Dust cover: Black Hooks: C100/9 White plastic ‘universal’ hooks are provided when traditional linen curtains are used
Track type: white powder coated, ‘Fast Fit’ track rail section manufactured from aluminium to BS EN 755. Complies with the requirements of HTM 66
Additional information: The Marlux Fast-Fit cubicle track is ideally suited for the use of Marlux Fast-Fit hospital disposable curtains, please ask for further details
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Anti-Ligature Installations It is recommended that all installations incorporating the Tidy-Joint anti-ligature system are fitted by trained installers. Marlux offer an installation service with all products within mainland UK, please contact [email protected] for further details
Marlux Fast-Fit Track Specification Sheet
Anti-Ligature Fast-Fit Cubicle Track
Cubicle Curtain Track – General Manufacture Reference: Marlux® Fast Fit Track System (Formerly Resistoid Cubicle Track) Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: 0121 783 5777 Fax: 0121 783 1117 email: [email protected]
Product reference: Fast-Fit cubicle curtain track. Material: Aluminium Bends: Factory pre-formed Colour/Finish: White powder coated Operation: Manual Track height: Approximately 2100mm above finished floor level Support units: C400 single support units, incorporating Anti-ligature “Tidy Joint” screwed
twice through suspended ceiling to plywood pad above ceiling tile (plywood pad supplied by others). Additional ceiling grid supports by oth-ers
Lateral stability: Brace the cubicle tracks using ‘dummy tracks’ to either walls or adjacent
cubicle tracks where possible. ‘V’ shaped hangers are not to be consid-ered.
Accessories: Anti-ligature, “Tidy Joint” wall brackets and fixings. Dust Cover: Black and cut into strips of no more than 150mm in length. Hooks: C100/9 White plastic ‘universal’ hooks are provided when traditional linen curtains are used
Track type: white powder coated, ‘Fast Fit’ track rail section manufactured from aluminium to BS EN 755. Complies with the requirements of HTM 66
Additional information: The Marlux Fast-Fit cubicle track is ideally suited for the use of Marlux Fast-Fit hospital disposable curtains, please ask for further details
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Fast-Fit Track Specification Sheet
Fast-Fit Window Track
Window Curtain Track – General Manufacture Reference: Marlux® Fast Fit Track System. Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: 0121 783 5777 Fax: 0121 783 1117 email: [email protected]
Product Reference: Fast-Fit window curtain track. Material: Aluminium Colour/Finish: White powder coated Operation: Manual Accessories: Top fix or face fix brackets as required plugged and screwed. Hooks: C100/9 White plastic ‘universal’ hooks are provided when traditional linen curtains are used
Track type: white powder coated, ‘Fast Fit’ track rail section manufactured from aluminium to BS EN 755.
Product Reference: Fast-Fit window curtain track. Material: Aluminium Colour/Finish: White powder coated Operation: Manual Accessories: Anti-ligature, top fix or face fix brackets as required incorporating the
‘Kestrel’ load-release system. Hooks: C100/9 White plastic ‘universal’ hooks are provided when traditional linen curtains are used
Window Curtain Track – Anti-Ligature Applications Manufacture Reference: Marlux® Fast Fit Track System. Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: 0121 783 5777 Fax: 0121 783 1117 email: [email protected]
Track type: white powder coated, ‘Fast Fit’ track rail section manufactured from aluminium to BS EN 755.
Anti-Ligature Installations It is recommended that all installations incorporating the ‘Kestrel’ load-release system are fitted by trained installers. Marlux offer an installation services with all products, please contact [email protected] for further details
Additional information: The Marlux Fast-Fit window track is ideally suited for the use of Marlux Fast-Fit hospital disposable curtains, please ask for further details
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Fast-Fit Adaptatrack Specification Sheet
Fast-Fit Adaptatrack
Adaptatrack – General Manufacture Reference: Marlux® Fast-Fit Adaptatrack System Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: 0121 783 5777 Fax: 0121 783 1117 email: [email protected]
Product reference: Fast-Fit Adaptatrack. Options: Available as Mk4 or Mk5 Material: Semi rigid and flexible semi rigid PVC Colour/Finish: White Operation: Manual Track height: As existing Accessories: Retaining pins.
Track type: Manufactured from two PVC materials, one semi rigid the other a flexible semi rigid PVC material through a co-extrusion process, this gives an hinged effect allowing the ‘Patented’ Adaptatrack to pass through the aperture and locating the arrow head section behind the recess.
Manufacturer Model Number Can We Adapt Which Adaptatrack?
Silent Gliss 6101 Yes Mark 4
Silent Gliss 6109 Yes Mark 4
Silent Gliss 6103 Yes Mark 4
Goelst G-Rail 4100 Yes Mark 4
Goelst G-Rail 4200 No N/A
Goelst G-Rail 5100 No N/A
Marlux 2600 Yes Mark 4
Mottura Separe (Silent Gliss Copy) Yes Mark 4
Supertrak/Roanoid S001/2 Yes Mark 5
Integra (Antiference) CUB15287 Yes Mark 5
Movatrack 100 Yes Mark 5
Adaptatrack Conversion Table
Maintenance information: The track should periodically be silicone wiped to ensure the curtain gliders optimum performance, typically this should be performed during a routine curtain change. Silicone wipe are available from Marlux, please ask for details
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Disposable Curtains Specification Sheet
Universal ‘Mesh-Top’ Disposable Hospital Cubicle Curtains
Manufacture Reference: Marlux® Disposable Hospital Curtains. Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: +44 (0) 121 783 5777 Fax: +44 (0) 121 783 1117 email: [email protected]
Marlux® Disposable Curtains, fire retardant to BS 5867-2: 2008 Type C and in compliance with the Fire-code – fire safety in the NHS Heath Technical Memorandum 05-03: Operational provisions. Part C: Textiles and furnishings, Section 8 Disposables, page 20, paragraph 8.3 The Mesh-Top curtain also meets the American standard NFPA 701
Curtain Type: Marlux® Disposable Hospital Curtains Product Reference: Universal ‘eyelet’ curtains. Material: Non-Woven Polypropylene Properties: Bacteriostatic polypropylene, which does not support bacterial growth Colour: From the standard Marlux® range Pleat Size: 150mm (6”) Operation: Manual Accessories: Eyelets are an integral part of the curtain
Universal ‘Eyelet’ Cubicle Curtain Product & Re-Order Codes Code Description XSB18/2400 Universal Mesh-Top Summer Blue 1.8m x 2.4m ( 70.9” x 94.5”) XSB36/2400 Universal Mesh-Top Summer Blue 3.6m x 2.4m (141.7” x 94.5”) XSB72/2400 Universal Mesh-Top Summer Blue 7.2m x 2.4m (283.5” x 94.5”) Marlux Mesh-Top disposable curtains are available from stock in the above sizes and in the following colours:- Summer Blue Mesh-Top curtains are available in all the colours in the Marlux range subject to minimum order quantities Bespoke Mesh-Top curtains are available in a variety of widths and drops subject to minimum order quantities This exciting product is also available in the Fast-Fit and Uni-Glide hooking options, please ask for details.
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Disposable Curtains Specification Sheet
Fast-Fit Printed Disposable Hospital Cubicle Curtain
Manufacture Reference: Marlux® Disposable Hospital Curtains. Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: +44 (0) 121 783 5777 Fax: +44 (0) 121 783 1117 email: [email protected]
Marlux® Disposable Curtains, fire retardant to BS 5867-2: 2008 Type C and in compliance with the Fire-code – fire safety in the NHS Heath Technical Memorandum 05-03: Operational provisions. Part C: Textiles and furnishings, Section 8 Disposables, page 20, paragraph 8.3
Curtain Type: Marlux® Disposable Hospital Curtains Product Reference: Fast-Fit curtains. Material: Non-Woven Polypropylene Properties: Bacteriostatic polypropylene, which does not support bacterial growth Colour: From the standard Marlux® range Pleat Size: 150mm (6”) Operation: Manual Accessories: Fast-Fit hooks are an integral part of the curtain
Fast-Fit Printed Cubicle Curtain Product & Re-Order Codes Code Description FSB18/1950/P Fast-Fit Printed Summer Blue 1.8m x 2.4m ( 70.9” x 76.8”) FSB36/1950/P Fast-Fit Printed Summer Blue 3.6m x 2.4m (141.7” x 76.8”) FSB72/1950/P Fast-Fit Printed Summer Blue 7.2m x 2.4m (283.5” x 76.8”) Marlux printed disposable curtains are available from stock in the above sizes and in the following colours:- Summer Blue The Marlux range of curtains consists of the following colours:- Summer Blue, Pastel Blue, Midnight Blue, Forest Green, Pastel Green, Bali Sand, Pastel Pink Marlux printed curtains are available in all the colours in the Marlux range subject to minimum order quantities Bespoke message printed curtains are also available in a variety of widths and drops subject to minimum order quantities, please contact us for further information
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Disposable Curtains Specification Sheet
Mini-Pleat Disposable Hospital Cubicle & Window Curtains
Manufacture Reference: Marlux® Disposable Hospital Curtains. Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: +44 (0) 121 783 5777 Fax: +44 (0) 121 783 1117 email: [email protected]
Marlux® Disposable Curtains, fire retardant to BS 5867-2: 2008 Type C and in compliance with the Fire-code – fire safety in the NHS Heath Technical Memorandum 05-03: Operational provisions. Part C: Textiles and furnishings, Section 8 Disposables, page 20, paragraph 8.3
Curtain Type: Marlux® Disposable Hospital Curtains Product Reference: Fast-Fit curtains. Material: Non-Woven Polypropylene Properties: Bacteriostatic polypropylene, which does not support bacterial growth Colour: From the standard Marlux® range Pleat Size: 75mm (3”) Operation: Manual Accessories: Available in both Fast-Fit & Universal ’eyelet’ hooking options
Fast-Fit Mini-Pleat Cubicle & Window Curtain Product & Re-Order Codes Code Description FSB18/1950 /M Fast Fit Mini-Pleat Summer Blue 1.8m x 1.95m ( 70.9” x 76.8”) FSB36/1950 /M Fast Fit Mini-Pleat Summer Blue 3.6m x 1.95m (141.7” x 76.8”) FSB72/1950 /M Fast Fit Mini-Pleat Summer Blue 7.2m x 1.95m (283.5” x 76.8”) Marlux Mini-Pleat disposable curtains are available on a made to order basis and in the following colours:- Summer Blue, Pastel Blue, Midnight Blue, Forest Green, Pastel Green, Bali Sand & Jet Black Bespoke Mini-Pleat curtains are available in a variety of widths and drops subject to minimum order quantities This exciting product is also available in the Universal ‘Eyelet’ and Uni-Glide hooking options, please ask for details.
Please note we reserve the right to alter the specification of any of our products without prior notice. (November 2011)
Marlux Disposable Curtains Specification Sheet
Mini-Pleat Disposable Hospital Shower Curtains
Manufacture Reference: Marlux® Disposable Hospital Curtains. Marlux Medical Ltd, Ace Business Park, Mackadown Lane, Kitts Green, Birmingham. B33 0LD. Tel: +44 (0) 121 783 5777 Fax: +44 (0) 121 783 1117 email: [email protected]
Marlux® Disposable Curtains, fire retardant to BS 5867-2: 2008 Type C and in compliance with the Fire-code – fire safety in the NHS Heath Technical Memorandum 05-03: Operational provisions. Part C: Textiles and furnishings, Section 8 Disposables, page 20, paragraph 8.3
Curtain Type: Marlux® Disposable Hospital Curtains Product Reference: Fast-Fit curtains. Material: Non-Woven Polypropylene Properties: Bacteriostatic polypropylene, which does not support bacterial growth Colour: From the standard Marlux® range Pleat Size: 75mm (3”) Operation: Manual Accessories: Available in both Uni-Glide & Universal ’eyelet’ hooking options
Universal ‘Eyelet’ Mini-Pleat Shower Curtain Product & Re-Order Codes Code Description USW18/1950/M Universal Mini-Pleat Snow White 1.8m x 1.95m ( 70.9” x 76.8”) USW36/1950/M Universal Mini-Pleat Snow White 3.6m x 1.95m (141.7” x 76.8”) Uni-Glide Mini-Pleat Shower Curtain Product & Re-Order Codes Code Description GSW18/1950/M Uni-Glide Mini-Pleat Snow White 1.8m x 1.95m ( 70.9” x 76.8”) GSW36/1950/M Uni-Glide Mini-Pleat Snow White 3.6m x 1.95m (141.7” x 76.8”) Marlux Mini-Pleat disposable shower curtains are available on a made to order basis. Bespoke Mini-Pleat shower curtains are available in a variety of widths and drops subject to mini-mum order quantities
