MatrixMIDFACE PlAtIng sYstEM - synthes.vo.llnwd.netsynthes.vo.llnwd.net/o16/LLNWMB8/US Mobile/Synthes North America... · DePuy Synthes MatrixMIDFACE Plating System MatrixMIDFACE

MatrixMIDFACE™ PlAtIng sYstEMSimple, effective, and effi cient

ProDUCt ovErvIEW

DePuy Synthes MatrixMIDFACE Plating System

MatrixMIDFACE PlAtIng sYstEMSimple, effective and effi cient

Introductionthe aim of surgical fracture treatment is to reconstruct the bony anatomy and restore its function. According to the Ao, internal fi xation is distinguished by anatomical reduction, stable fi xation, preservation of blood supply, and early, active mobilization.1 Plate and screw osteosynthesis has been established and clinically recognized for some time.

keeping the Ao philosophy at its core, Matrix is the new plating platform for internal fi xation of the craniomaxillo-facial skeleton—addressing neuro, craniofacial, mandibular, and orthognathic surgery. Matrix is a simple yet comprehensive system that offers fl exibility and ease of use.

Simple• All screws work with all plates within each Matrix system• one screwdriver blade for all screws within each

Matrix system• Color-coding by strength for easy identifi cation

Effective• reduced plate/screw profi le, where applicable• self-retaining screws/blades that minimize cam-out*• rounded edges on plates

Effi cient• standardized instrumentation• reduced inventory for hospitals without compromising

clinical solutions

Indicationssynthes MatrixMIDFACE™ Plating system is intended for use in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures; and selective orthognathic surgery of the maxilla and chin.

*Data on fi le at DePuy synthes.1. Müller ME, Allgöwer M, schneider r, Willenegger H:

Manual of Internal Fixation, 3rd Edition. berlin: springer-verlag. 1991.

MatrixMIDFACE Plating System DePuy Synthes 1

1.0 mm system 1.3 mm system 1.5 mm system/2.0 mm system

+2.0 mm systemComparable to:Craniofacial Fixation system

lightweight construction with plastic and aluminum

Plates have dedicated areas

semi-transparent module lids

Easy identifi cation of missing implants

Clean and organized instrument layout

Implants located on top level

recessed screw hole module for easier screw loading

1 DePuy Synthes MatrixMIDFACE Plating System

MatrixMIDFACE Plating system

MatrixMIDFACE System• one screw diameter and one screwdriver blade

work with all plates• reduced overall plate and screw profi le• standardized instrumentation• self-retaining screws/blades • reduced cam-out• Easier screw/blade re-engagement

MatrixMIDFACE Screws• Made from titanium alloy (ti-6Al-7nb)• Available in self-drilling† (silver), self-tapping (bronze),

and emergency (blue) designs• 1.55 mm diameter (1.85 mm diameter emergency screw)• Available in 3 mm to 18 mm lengths• 0.60 mm thread pitch for faster insertion• optimal recess to facilitate retention and minimize cam-out*

MatrixMIDFACE Plates• Made from commercially pure titanium• Available in 0.4 mm (silver), 0.5 mm (blue), 0.7 mm (pink),

and 0.8 mm (gold) thicknesses for a variety of indications• Plate color designates plate strength• Full selection of plates for noE, ZMC, leFort I, and a variety

of other craniofacial indications

† In areas of dense bone, it might be necessary to predrill when using self-drilling screws.

*Data on fi le at synthes


MatrixNEURO Contourable Mesh Plates• Made from commercially pure titanium• Available in a variety of shapes and sizes: malleable,

0.4 mm thick (silver) and rigid, 0.4 mm thick (blue), 0.6 mm thick (pink)

• Design allows screw placement through either side of mesh

• Color-coded, based on Matrix strength characteristic

MatrixMIDFACE Orbital Plates• Made from commercially pure titanium• Available in a variety of shapes: anatomic, mesh,

and universal• Available in a variety of thicknesses: 0.2 mm (silver),

0.3 mm (blue), 0.4 mm (pink), and 0.5 mm (gold)• Color-coded, based on Matrix strength characteristic

MatrixMIDFACE Preformed Orbital Plates• Made from commercially pure titanium• Preformed 3-dimensional shape reduces the amount

of intraoperative contouring• Contoured plate edges allow for easier plate

insertion through the skin incision• segmented design allows plate size customization

with minimal sharp edges• rigid zone ensures consistent form in the posterior orbit• left and right implants available in two sizes,

small (dark purple) and large (gold)• Plates are 0.4 mm thick


MatrixMIDFACE PlAtEs—IntEnDED UsEs

MICro PlAtEs, sIlvEr

MInI PlAtEs, blUE

Indications: nasal, orbital, and frontal region

Comparable to: 1.0 mm Craniofacial Fixation system

Midface Plates 0.4 mm thickorbital Plates 0.2 mm thickMesh Plates 0.4 mm thick, malleable

Indications: nasal, orbital, zygoma, frontal, and maxillary region


Midface Plates 0.5 mm thickorbital Plates 0.3 mm thickMesh Plates 0.4 mm thick, rigid


MEDIUM PlAtEs, PInkIndications: nasal, orbital, zygoma, frontal, and maxillary region

Comparable to: 1.5 mm and 2.0 mm Craniofacial Fixation systems

Midface Plates 0.7 mm thickorbital Plates 0.4 mm thickMesh Plates 0.6 mm thick, rigid

lArgE PlAtEs, golDIndications: Central and lateral midface, zygoma region


Midface Plates 0.8 mm thickorbital Plates 0.5 mm thick

1.0 mm system 1.3 mm system 1.5 mm system/2.0 mm system

+2.0 mm systemComparable to: Craniofacial Fixation system


MatrixMIDFACE PlAtEs—orbItAl

04.503.306 titanium orbital Mesh Plate, 0.2 mm thick, silver

04.503.307 titanium orbital Mesh Plate, 0.3 mm thick, blue

04.503.301 titanium orbital Floor Plate, anatomic, small, 0.3 mm thick, blue

04.503.302 titanium orbital Floor Plate, anatomic, medium, 0.3 mm thick, blue


04.503.304 titanium Universal orbital Floor Plate, 0.4 mm thick, pink

04.503.308 titanium orbital Mesh Plate, 0.4 mm thick, pink

04.503.305 titanium Universal Medial Wall Plate, 0.5 mm thick, gold

04.503.303 titanium orbital Floor Plate, anatomic, large, 0.3 mm thick, blue


MatrixMIDFACE PlAtEs—PrEForMED orbItAl

04.503.801◊ titanium Preformed orbital Plate, small, left, dark purple

04.503.802◊ titanium Preformed orbital Plate, large, left, gold

04.503.811◊ titanium Preformed orbital Plate, small, right, dark purple

04.503.812◊ titanium Preformed orbital Plate, large, right, gold

◊Available nonsterile or sterile-packed. Add s to product number for sterile product.


MatrixMIDFACE PlAtEs—stAnDArD

MICro PlAtEs04.503.313 titanium orbital rim Plate, 12 holes,

0.4 mm thick, silver

04.503.314 titanium Adaption Plate, 6 holes, 0.4 mm thick, silver



04.503.317 titanium Y-Plate, 1 x 3 holes, 0.4 mm thick, silver

04.503.318 titanium Double Y-Plate, 6 holes, 0.4 mm thick, silver

04.503.330 titanium box Plate, 4 holes, 5 mm x 10 mm, 0.4 mm thick, silver

Also available in 10 mm x 10 mm

04.503.332 titanium X-Plate, 4 holes, 0.4 mm thick, silver

04.503.333 titanium strut Plate, 18 holes, 0.4 mm thick, silver

5 x 10 10 x 10


MatrixMIDFACE Plates—standard

04.503.343 titanium orbital rim Plate, 12 holes, 0.5 mm thick, blue

04.503.322 titanium H-Plate, 11 holes, 0.5 mm thick, blue

04.503.324 titanium oblique l-Plate, 2 x 3 holes, right, 0.5 mm thick, blue

Also available in 2 x 3 holes, left





04.503.327 titanium t-Plate, 3 x 4 holes, 0.5 mm thick, blue

MInI PlAtEs


04.503.346 titanium Adaption Plate, 20 holes, 0.5 mm thick, blue


04.503.347 titanium Y-Plate, 1 x 3 holes, 0.5 mm thick, blue

04.503.348 titanium Double Y-Plate, 6 holes, 0.5 mm thick, blue

04.503.360 titanium box Plate, 4 holes, 5 mm x 10 mm, 0.5 mm thick, blue


04.503.362 titanium X-Plate, 4 holes, 0.5 mm thick, blue

04.503.363 titanium strut Plate, 18 holes, 0.5 mm thick, blue

5 x 10


10 x 10



04.503.356 titanium oblique l-Plate, 3 x 4 holes, right, 0.7 mm thick, pink


04.503.357 titanium t-Plate, 3 x 4 holes, 0.7 mm thick, pink

04.503.352 titanium H-Plate, 11 holes, 0.7 mm thick, pink

04.503.373 titanium orbital rim Plate, 12 holes, 0.7 mm thick, pink





MEDIUM PlAtEs


04.503.378 titanium Double Y-Plate, 6 holes, 0.7 mm thick, pink

04.503.390 titanium box Plate, 4 holes, 5 mm x 10 mm, 0.7 mm thick, pink


04.503.392 titanium X-Plate, 4 holes, 0.7 mm thick, pink

04.503.393 titanium strut Plate, 18 holes, 0.7 mm thick, pink

04.503.377 titanium Y-Plate, 1 x 3 holes, 0.7 mm thick, pink

04.503.376 titanium Adaption Plate, 20 holes, 0.7 mm thick, pink



5 x 10 10 x 10



04.503.382 titanium H-Plate, 11 holes, 0.8 mm thick, gold

04.503.384 titanium oblique l-Plate, 2 x 3 holes, right, 0.8 mm thick, gold






04.503.387 titanium t-Plate, 3 x 4 holes, 0.8 mm thick, gold

lArgE PlAtEs


04.503.396 titanium Adaption Plate, 20 holes, 0.8 mm thick, gold

04.503.397 titanium orbital rim Plate, 12 holes, 0.8 mm thick, gold




MatrixMIDFACE PlAtEs—ContoUrAblE MEsH

titanium MatrixnEUro Contourable Mesh 04.503.081 38 mm x 45 mm, silver, malleable


04.503.082 38 mm x 45 mm, 0.4 mm thick, blue, rigid (shown)

Also available in 100 mm x 100 mm and 200 mm x 200 mm

04.503.120 38 mm x 45 mm, 0.6 mm thick, pink, rigid (shown)

Also available in 100 mm x 100 mm and 200 mm x 200 mm

titanium MatrixnEUro Contourable Mesh 04.503.087 large arc, silver, malleable (shown)

Also available in small

04.503.089 large arc, 0.4 mm thick, blue, rigid


04.503.124 large arc, 0.6 mm thick, pink, rigid


titanium MatrixnEUro Contourable Mesh 04.503.090 30 mm diameter, silver, malleable

Also available in 70 mm x 100 mm diameters

04.503.093 30 mm diameter, 0.4 mm thick, blue, rigid (shown)


04.503.125 30 mm diameter, 0.6 mm thick, pink, rigid



sElECtED MatrixMIDFACE InstrUMEnts

screwdriver Handles, hex coupling311.005 small311.006 Medium311.007 large

MatrixMIDFACE screwdriver blades, self-retaining, hex coupling 03.503.201 52 mm03.503.202 76 mm03.503.203 96 mm

03.503.034 Mini Plate Holder, long

Also available in short


selected MatrixMIDFACE Instruments

03.503.035 In-Plane Plate bender

03.503.037 Mesh Cutting scissors, long nose

Also available in short nose

MatrixMIDFACE screwdriver blades with spring Holding sleeves, hex coupling03.503.205 short, 79 mm 03.503.206 long, 95 mm


03.503.038 Plate bender

03.503.039 Plate Cutter

03.503.801 orbital retractor, left03.503.802 orbital retractor, right


selected MatrixMIDFACE Instruments

03.507.000 t-Handle, hex coupling, small

threaded reduction tools, hex coupling03.507.002s 2.4 mm, self-drilling, 78 mm, sterile (shown)03.507.003 3.5 mm, self-tapping, 78 mm03.507.004 3.5 mm, self-tapping, 43 mm

03.507.005 2.4 mm Drill guide

310.572 2.4 mm Drill bit


MatrixMIDFACE PlAtIng sYstEM MoDUlEs AnD trAYs

306.610 generic Module, for MatrixMIDFACE system

(For top level of graphic case)

306.616 screw Module with reversible screw Insert (For top level of graphic case)

Note: Use the Headframe Adjustment Instrument, for External Midface Distractor (314.408), to remove and replace the four hex screws that hold the reversible screw insert in place.

306.618

306.617

306.615

306.614

Plate Module Inserts306.614 0.4 mm306.615 0.5 mm306.617 0.7 mm306.618 0.8 mm306.640 Plate Insert, for generic Module (stores preformed orbital plates)


306.640


MatrixMIDFACE Plating system Modules and trays

306.611* 1.0 mm CMFs Module306.613* 1.3 mm CMFs Module


306.619 orbital Plate and Mesh Module

(For middle level of graphic case)

306.626 Instrument tray 306.627 Drill bits and blades Module

(For bottom level of graphic case)

*Also available

shown with Plate Holding Forceps (347.98)


MatrixMIDFACE PlAtIng sYstEM

Set01.503.504 MatrixMIDFACE Plating system set

Graphic Case and Modules306.601 graphic Case, for MatrixMIDFACE system306.603 graphic Case lid, for MatrixMIDFACE system306.610 generic Module, for MatrixMIDFACE system

CMFs system Modules306.611 1.0 mm 306.613 1.3 mm

Plate Module Inserts306.614 0.4 mm 306.615 0.5 mm306.617 0.7 mm306.618 0.8 mm306.640 Plate Insert, for generic Module

306.616 screw Module with reversible screw Insert306.619 orbital Plate and Mesh Module306.624 generic Module lid306.626 Instrument tray306.627 Drill bits and blades Module

Label Sheets and Screw Length Markers label sheets306.522 for MatrixnEUro Module306.604 for Matrix system strength gradient306.628 for Drill bits and screwdriver blades306.630 for Module 306.610306.631 for 1.0 mm CMFs306.633 for 1.3 mm CMFs306.634 for 0.4 mm Plates306.635 for 0.5 mm Plates306.636 for screws306.637 for 0.7 mm Plates306.638 for 0.8 mm Plates306.639 for orbital Plates306.641 for Preformed orbital Plates

screw length Markers, for self-drilling screws304.103W 3 mm304.104W 4 mm304.105W 5 mm304.106W 6 mm304.108W 8 mm

screw length Markers, for self-tapping screws (10/pkg.)304.103 3 mm304.104 4 mm304.105 5 mm304.106 6 mm304.108 8 mm304.110 10 mm304.112 12 mm304.114 14 mm304.116 16 mm304.118 18 mm

For detailed cleaning and sterilization instructions, please refer to: www.synthes.com/cleaning-sterilization In Canada, the cleaning and sterilization instructions will be provided with the loaner shipments.


Titanium MatrixMIDFACE Plates orbital Floor Plates04.503.301 Anatomic small, 0.3 mm thick (blue)04.503.302 Anatomic medium, 0.3 mm thick (blue)04.503.303 Anatomic large, 0.3 mm thick (blue)04.503.304 Universal Floor Plate, 0.4 mm thick (pink)04.503.305 Universal Medial Wall Plate,

0.5 mm thick (gold)04.503.306 orbital Mesh Plate, 0.2 mm thick (silver) 04.503.307 orbital Mesh Plate, 0.3 mm thick (blue) 04.503.308 orbital Mesh Plate, 0.4 mm thick (pink)

orbital rim Plates, 12 holes04.503.313 0.4 mm thick (silver)04.503.343 0.5 mm thick (blue)04.503.373 0.7 mm thick (pink)

Preformed orbital Plates04.503.801◊ small, left (dark purple)04.503.802◊ large, left (gold)04.503.811◊ small, right (dark purple)04.503.812◊ large, right (gold)

Adaption Plates, 20 holes04.503.316 0.4 mm thick (silver)04.503.346 0.5 mm thick (blue)04.503.376 0.7 mm thick (pink)04.503.396 0.8 mm thick (gold)



Y-Plates04.503.317 1 x 3 holes, 0.4 mm thick (silver)04.503.347 1 x 3 holes, 0.5 mm thick (blue)04.503.377 1 x 3 holes, 0.7 mm thick (pink)04.503.318 Double, 6 holes, 0.4 mm thick (silver)04.503.348 Double, 6 holes, 0.5 mm thick (blue)04.503.378 Double, 6 holes, 0.7 mm thick (pink)


Titanium MatrixMIDFACE Screws††

self-tapping screws (5/pkg.)*04.503.203.05 3 mm04.503.204.05 4 mm04.503.205.05 5 mm04.503.206.05 6 mm04.503.208.05 8 mm04.503.210.05 10 mm04.503.212.05 12 mm04.503.214.05 14 mm04.503.216.05 16 mm04.503.218.05 18 mm

self-drilling screws (5/pkg.)*04.503.223.05 3 mm**04.503.224.05 4 mm04.503.225.05 5 mm04.503.226.05 6 mm04.503.228.05 8 mm

Emergency screws (5/pkg.)04.503.233.05 3 mm04.503.234.05 4 mm04.503.235.05 5 mm04.503.236.05 6 mm04.503.238.05 8 mm04.503.240.05 10 mm04.503.242.05 12 mm04.503.244.05 14 mm04.503.246.05 16 mm04.503.248.05 18 mm

* Predrilling recommended with 1.1 mm Matrix Drill bits for 3 mm–8 mm lengths and 1.25 mm MatrixMIDFACE Drill bits for 10 mm–18 mm lengths. In areas of dense bone, it might be necessary to predrill when using self-drilling screws.

** Predrilling not recommended for 3 mm self-drilling screws◊ Available nonsterile or sterile-packed. Add s to product number for sterile product.† † Also available packaged individually and in 20 packs.


titanium MatrixMIDFACE Plates (continued)

box Plates, 4 holes

04.503.330 5 mm x 10 mm, 0.4 mm thick (silver)

04.503.360 5 mm x 10 mm, 0.5 mm thick (blue)

04.503.390 5 mm x 10 mm, 0.7 mm thick (pink)

04.503.331 10 mm x 10 mm, 0.4 mm thick (silver)

04.503.361 10 mm x 10 mm, 0.5 mm thick (blue)

04.503.391 10 mm x 10 mm, 0.7 mm thick (pink)

X-Plates, 4 holes

04.503.332 0.4 mm thick (silver)

04.503.362 0.5 mm thick (blue)

04.503.392 0.7 mm thick (pink)

strut Plates, 18 holes

04.503.333 0.4 mm thick (silver)

04.503.363 0.5 mm thick (blue)

04.503.393 0.7 mm thick (pink)

oblique l-Plates, 2 x 3 holes

04.503.323 left, 0.5 mm thick (blue)

04.503.353 left, 0.7 mm thick (pink)

04.503.383 left, 0.8 mm thick (gold)

04.503.324 right, 0.5 mm thick (blue)

04.503.354 right, 0.7 mm thick (pink)

04.503.384 right, 0.8 mm thick (gold)















t-Plates, 3 x 4 holes

04.503.327 0.5 mm thick (blue)

04.503.357 0.7 mm thick (pink)

04.503.387 0.8 mm thick (gold)

H-Plates, 11 holes

04.503.322 0.5 mm thick (blue)

04.503.352 0.7 mm thick (pink)

04.503.382 0.8 mm thick (gold)

Titanium MatrixNEURO Contourable Mesh04.503.081 38 mm x 45 mm, malleable (silver)

04.503.082 38 mm x 45 mm, 0.4 mm thick, rigid (blue)

04.503.083 100 mm x 100 mm, malleable (silver)



04.503.086 small arc, malleable (silver)

04.503.087 large arc, malleable (silver)

04.503.088 small arc, 0.4 mm thick, rigid (blue)

04.503.089 large arc, 0.4 mm thick, rigid (blue)

04.503.090 30 mm diameter, malleable (silver)



04.503.093 30 mm diameter, 0.4 mm thick, rigid (blue)



04.503.120 38 mm x 45 mm, 0.6 mm thick, rigid (pink)



04.503.123 small arc, 0.6 mm thick, rigid (pink)

04.503.124 large arc, 0.6 mm thick, rigid (pink)

04.503.125 30 mm diameter, 0.6 mm thick, rigid (pink)




MatrixMIDFACE 1.25 mm Drill bits, J-latch

03.503.110 10 mm stop, 44.5 mm

03.503.112 12 mm stop, 44.5 mm

03.503.118 18 mm stop, 44.5 mm

03.503.120 80 mm

03.503.121 125 mm

03.503.122 8 mm stop, 125 mm

03.503.123 18 mm stop, 125 mm

MatrixMIDFACE 1.25 mm Drill bits, mini quick coupling

03.503.140 10 mm stop, 44.5 mm

03.503.142 12 mm stop, 44.5 mm

03.503.148 18 mm stop, 44.5 mm

03.503.150 80 mm

03.503.151 125 mm

03.503.152 8 mm stop, 125 mm

03.503.153 18 mm stop, 125 mm

screwdriver Handles, hex coupling

311.005 small

311.006 Medium

311.007 large

312.155 1.5 mm Drill guide (for use with 1.25 mm drill bits)


Instruments (continued) MatrixMIDFACE screwdriver blades, self-retaining, hex coupling

03.503.201 52 mm

03.503.202 76 mm

03.503.203 96 mm

MatrixMIDFACE screwdriver blades with spring Holding sleeve, hex coupling

03.503.205 short, 79 mm

03.503.206 long, 95 mm

03.503.032 Mini Plate Holder, short

03.503.033 Mesh Cutting scissors, short nose

03.503.034 Mini Plate Holder, long

03.503.035 In-Plane bender, for MatrixMIDFACE plates

03.503.037 Mesh Cutting scissors, long nose

03.503.038 Plate bender, for Midface plates

03.503.039 Plate Cutter, for Midface plates

03.507.000 t-Handle, hex coupling, small

347.98 Plate Holding Forceps

threaded reduction tools, hex coupling

03.507.002s 2.4 mm, self-drilling, 78 mm, sterile

03.507.003 3.5 mm, self-tapping, 78 mm

03.507.004 3.5 mm, self-tapping, 43 mm

03.507.005 2.4 mm Drill guide, for use with 310.572

310.572 2.4 mm Drill bit, for use with 03.507.003

orbital retractors

03.503.801 left

03.503.802 right

Matrix 1.1 mm Drill bits, J-latch

03.503.244 4 mm stop

03.503.246 6 mm stop

03.503.248 8 mm stop


Also AvAIlAblE

Instruments

bending templates, for MatrixMIDFACE, 0.5 mm thick*

03.503.360 For orbital Floor Plate, anatomic, small

03.503.361 For orbital Floor Plate, anatomic, medium

03.503.362 For orbital Floor Plate, anatomic, large

03.503.363 For Universal orbital Floor Plate

03.503.364 For Universal Medial Wall Plate

03.503.365 For orbital Mesh Plates

03.503.366 For Adaption Plates

03.503.367 For orbital rim Plates

03.503.368 For oblique l-Plates, 2 x 3



03.503.371 For Y-Plates, 1 x 3

03.503.372 For X-Plates

03.503.373 For H-Plates

03.503.374 For t-Plates

03.503.375 For box Plates, 5 mm x 10 mm

03.503.376 For box Plates, 10 mm x 10 mm

03.503.377 For strut Plates

03.503.378 For silver Double Y-Plate

03.503.379 For blue Double Y-Plate

03.503.380 For Pink Double Y-Plate

*bending templates cannot be used as drill guides.

Legal manufacturer (Canada):Synthes (Canada) Ltd. 2566 Meadowpine boulevard Mississauga, ontario l5n 6P9 telephone: (905) 567-0440 to order: (800) 668-1119 Fax: (905) 567-3185

Manufactured by (United States):Synthes CMF1302 Wrights lane EastWest Chester, PA 19380 telephone: (610) 719-5000 to order: (800) 523-0322 Fax: (610) 251-9056

www.depuysynthes.com

Limited Warranty and Disclaimer: DePuy Synthes CMF products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.

WARNING: In the USA, this product has labeling limitations. See package insert for complete information.

Rx Only

not all products are currently available in all markets.

© DePuy synthes CMF, a division of DoI 2013. All rights reserved. J7036-H 6/14

Documents

MatrixMIDFACE PlAtIng sYstEM - synthes.vo.llnwd.netsynthes.vo.llnwd.net/o16/LLNWMB8/US Mobile/Synthes North America... · DePuy Synthes MatrixMIDFACE Plating System MatrixMIDFACE