Maximum Performance Contoured Diaphragm Couplings€¦ · Diaphragm Type 210・310・410・510 ... If API 671 coupling is specified without any other requirements, ... 5.97×104 5.39×104

Maximum Performance Contoured Diaphragm Couplings

CAT No. N003E-11121

Model 66/Standard Dimensions and Characteristics

Diaphragm Type 304

Diaphragm Type 205・305・405・505







Diaphragm Type 318・418・518

Diaphragm Type 322・422・522

Model 67/74・99/100 Standard Dimensions and Characteristics

Model 67/74

Model 99/100

Multi Diaphragm

Special Features

Eagle Industry Co., Ltd has formed a worldwide alliance with Burgmann Industries GmbH & Co. since 2005.Contoured Diaphragm Couplings are manufactured by EagleBurgmann Japan.Contoured Diaphragm Couplings have been supplied for various high-speed/ high-torque applications such as compressors, turbines, etc. to help their successful operation, and as a result it is being highly evaluated by many users.Contoured Diaphragm Coupling features a maximum transmitting torque of 2700kNm, a maximum speed of 100,000rpm, non-lubrication and maintenance-free opera-tion, which will surely contribute to various industries in their moderniza-tion and efficiency improvement efforts.

Ease of installation and removal of “Spacer” (Flex unit)

Best for high speed application(up to 100,000rpm)Wider range of operating temperature *1

*1 Temperature resistance of standard material: -100～+320℃

Angular

Combined (parallel and angular)

Diaphragm size:

Flex Unit length:

Hubs:

Standard 04,05,06,08,10,12,14,16,18,22*Other sizes are available upon request.

The Flex Unit length for each size shown in Characteristic Chart is our standard. Other lengths are available upon request.

Model 66 hubs are standardized with base bores. Standard hubs are identified as A~L and non-standard as Z.

a.Power (kW, PS, HP) and speed of the driver machine

Selection Procedure

STEP

STEP

STEP

STEP

STEP

●Check Required Data

Select the coupling type from pages 8~17 or 20~23 so that the transmitting torque required is greater than or equal to the torque specified in Characteristic Chart. *Verify that the misalignments of the application are within ranges specified. *For applications where motor start-up or equipment fluctuating torque occurs, a fatigue analysis is required. Contact us for such an application.

Power SE (For example API671 4th=1.5)

●Calculate Torque “T” (Nm)

●Select Coupling Type

The maximum bore of the coupling selected should be greater than the shaft diameter.

●Check the Hub Bore

Dynamic balance is performed as per our standard shown below unless otherwise specified.

※1. If the balancing of the completely assembled coupling is specified, the balance is performed on each hub and the complete assembly.※2. If API 671 coupling is specified without any other requirements, the balance is conducted on each hub and the complete assembly.

※1. Diaphragm size 04 only

SCM435, S25C※1,or Equivalent

SS400, SPCC※1,or Equivalent

SUS304, SCM440,or Equivalent

SUS304, SCM440,or Equivalent

SS400 or Equivalent SCM440 or Equivalent

SNCM439 or Equivalent SNCM439 or EquivalentSNCM439 or Equivalent

SCM435, SNCM439,or Equivalent

Model67:Special Low Alloy SteelModel99:Special Stainless Steel

Low Alloy SteelLow Alloy Steel orStainless Steel

Low Alloy Steel Low Alloy Steel

Model74 :Special Low Alloy SteelModel100:Special Stainless Steel

SCM435, SNCM439,or Equivalent

●Check Balance

Standard Materials

※1 ※2

※1

※1

General PumpsMachine Tools

General Machines

※Contact us for speed exceeding 4,000rpm.

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

AB

1420

4050

6878

5959

5060

4555

1.52.1

11.918.9

DiaphragmType

Lmm

Transmitting Torque Misalignment Spring RateLimitNm

Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

5060708090

100110120130140150

304 345 692 5.81×10-3 1.34 217 126

0.270.320.380.450.500.560.610.670.730.790.85

0.600.620.650.680.710.730.760.790.820.840.87

8.298.358.408.468.518.578.628.688.738.798.84

5.97×104

5.39×104

4.92×104

4.52×104

4.18×104

3.89×104

3.64×104

3.41×104

3.22×104

3.04×104

2.88×104

ABCD

20203030

26364660

58688398

44546984

40506070

33.343.353.363.3

1.21.72.43.8

20.424.235.359.1

100150200250300350400450

205

305

405

505

667

1,000

1,330

1,670

1,300

3,390

4,050

4,050

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

1.46

0.97

0.76

0.62

421

1,420

3,370

6,580

114

386

915

1,790

100150200250300350400450100150200250300350400450100150200250300350400450

0.831.261.702.142.573.013.443.880.550.841.131.421.712.002.292.590.410.630.851.071.281.501.721.940.330.500.680.851.031.201.371.55

2.42.83.23.64.04.44.85.22.42.83.23.64.04.44.85.22.42.83.23.64.04.44.85.22.5 2.9 3.3 3.7 4.1 4.5 4.9 5.3

57.7 59.0 60.3 61.5 62.8 64.1 65.4 66.7 58.1 59.4 60.7 61.9 63.2 64.5 65.8 67.1 58.5 59.8 61.0 62.3 63.6 64.9 66.2 67.5 58.9 60.2 61.4 62.7 64.0 65.3 66.6 67.9

1.15×105

9.38×104

7.95×104

6.89×104

6.08×104

5.44×104

4.93×104

4.50×104

1.35×105

1.07×105

8.87×104

7.58×104

6.61×104

5.86×104

5.27×104

4.78×104

1.48×105

1.15×105

9.42×104

7.97×104

6.91×104

6.10×104

5.46×104

4.94×104

1.57×105

1.21×105

9.78×104

8.23×104

7.10×104

6.25×104

5.58×104

5.04×104

Contact us if misalignment or flex unit length is greater than the figure listed.Contact us for application where the fluctuating torque occurs from motor drive or reciprocating equipment.

HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

BCDE

30303030

36466075

68 83 98118

54 69 84104

50607080

43.353.363.373.3

1.82.74.16.4

42.654.077.8

138

100150200250300350400450

206

306

406

506

1,320

1,970

2,630

3,290

2,570

6,710

8,940

8,980

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

1.83

1.22

0.95

0.78

831

2,800

6,650

13,000

144

484

1,150

2,240

100150200250300350400450100150200250300350400450100150200250300350400450

0.831.261.702.142.573.013.443.880.55 0.84 1.13 1.42 1.71 2.00 2.29 2.59 0.41 0.63 0.85 1.07 1.28 1.50 1.72 1.94 0.33 0.50 0.68 0.85 1.03 1.20 1.37 1.55

3.33.94.55.05.66.26.87.43.3 3.9 4.5 5.1 5.7 6.2 6.8 7.4 3.4 4.0 4.5 5.1 5.7 6.3 6.9 7.5 3.4 4.0 4.6 5.2 5.8 6.3 6.9 7.5

114118122125129133137141115119123127131134138142116120124128132136140143117121125129133137141145

2.78×105

2.36×105

2.05×105

1.81×105

1.62×105

1.47×105

1.34×105

1.24×105

3.40×105

2.80×105

2.37×105

2.06×105

1.82×105

1.63×105

1.48×105

1.35×105

3.84×105

3.08×105

2.58×105

2.21×105

1.94×105

1.72×105

1.55×105

1.41×105

4.16×105

3.28×105

2.71×105

2.31×105

2.02×105

1.79×105

1.60×105

1.45×105


HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

CDEFG

3030303030

46 60 75 95110

83 98118137157

67 82102121141

60 70 80 95110

53 63 73 88103

4.1 5.4 7.711.316.4

174 196 254 375603

100150200250300350400450100150200250300350400450100150200250300350400450100150200250300350400450

208

308

408

508

2,930

4,400

5,870

7,330

5,730

14,900

19,900

22,800

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.40

1.60

1.25

1.02

1,850

6,250

14,800

28,900

187

633

1,500

2,930

0.81 1.25 1.69 2.12 2.56 3.00 3.43 3.87 0.54 0.83 1.12 1.41 1.70 2.00 2.29 2.58 0.40 0.62 0.84 1.06 1.28 1.50 1.71 1.93 0.32 0.50 0.67 0.85 1.02 1.20 1.37 1.54

5.8 6.8 7.7 8.7 9.6

10.6 11.5 12.5

5.9 6.9 7.8 8.8 9.7

10.7 11.6 12.6

6.0 7.0 7.9 8.9 9.8

10.8 11.7 12.7

6.1 7.1 8.0 9.0 9.9

10.9 11.8 12.8

356368381393405418430442361373385398410422435447365378390402415427439452370382395407419432444456

7.22×105

6.31×105

5.60×105

5.03×105

4.57×105

4.19×105

3.86×105

3.58×105

9.20×105

7.77×105

6.72×105

5.92×105

5.29×105

4.78×105

4.36×105

4.01×105

1.07×106

8.78×105

7.47×105

6.49×105

5.75×105

5.15×105

4.67×105

4.27×105

1.18×106

9.53×105

8.00×105

6.89×105

6.06×105

5.40×105

4.87×105

4.44×105


HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

EFGHI

5050505090

75 95110125140

118137157177197

102121141161181

80 95110125140

73 88103118133

8.011.416.423.026.9

415 535 7631,1501,710

100150200250300350400450

210

310

410

510

5,500

8,250

11,000

13,700

10,700

28,000

37,300

44,100

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.95

1.97

1.55

1.26

3,470

11,700

27,800

54,200

231

780

1,850

3,610

100150200250300350400450100150200250300350400450100150200250300350400450

0.80 1.24 1.67 2.11 2.54 2.98 3.42 3.85 0.53 0.82 1.11 1.40 1.69 1.99 2.28 2.57 0.40 0.62 0.83 1.05 1.27 1.49 1.71 1.92 0.32 0.49 0.67 0.84 1.01 1.19 1.36 1.54

8.8 10.2 11.5 12.9 14.2 15.6 16.9 18.3 9.0 10.3 11.7 13.1 14.4 15.8 17.1 18.5 9.2 10.5 11.9 13.2 14.6 16.0 17.3 18.7 9.4 10.7 12.1 13.4 14.8 16.1 17.5 18.8

790817844871898925952979803830857884911938965993816843870897924951979

1,010829856883910938965992

1,020

1.43×106

1.27×106

1.13×106

1.03×106

9.40×105

8.66×105

8.02×105

7.48×105

1.85×106

1.59×106

1.39×106

1.23×106

1.11×106

1.00×106

9.20×105

8.49×105

2.17×106

1.81×106

1.56×106

1.36×106

1.21×106

1.09×106

9.92×105

9.10×105

2.43×106

1.99×106

1.68×106

1.46×106

1.29×106

1.15×106

1.04×106

9.51×105


HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

FGHIJ

80 80100120130

95110125140170

137157177197235

119139159179217

95110125140170

88103118133163

10.915.519.123.241.0

8571,0801,4101,9103,960

100150200250300350400450

212

312

412

512

10,000

15,000

20,000

25,100

19,500

51,100

63,100

63,100

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

3.60

2.42

1.88

1.54

6,330

21,400

50,600

98,900

282

953

2,260

4,410

100150200250300350400450100150200250300350400450100150200250300350400450

0.79 1.22 1.66 2.09 2.53 2.97 3.40 3.84 0.52 0.81 1.10 1.39 1.69 1.98 2.27 2.56 0.39 0.61 0.83 1.04 1.26 1.48 1.70 1.92 0.31 0.49 0.66 0.83 1.01 1.18 1.36 1.53

12.9 14.6 16.2 17.8 19.5 21.1 22.8 24.4 13.3 14.9 16.5 18.2 19.8 21.5 23.1 24.7 13.6 15.2 16.9 18.5 20.2 21.8 23.4 25.1 13.9 15.6 17.2 18.9 20.5 22.1 23.8 25.4

1,7401,7901,8401,8901,9401,9802,0302,0801,7801,8301,8801,9201,9702,0202,0702,1201,8201,8601,9101,9602,0102,0602,1002,1501,8501,9001,9502,0002,0402,0902,1402,190

2.55×106

2.25×106

2.02×106

1.83×106

1.67×106

1.54×106

1.43×106

1.33×106

3.27×106

2.80×106

2.45×106

2.18×106

1.96×106

1.78×106

1.63×106

1.50×106

3.82×106

3.19×106

2.74×106

2.40×106

2.14×106

1.93×106

1.75×106

1.61×106

4.25×106

3.49×106

2.96×106

2.57×106

2.27×106

2.03×106

1.84×106

1.68×106


HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

GHIJK

100100100120130

110125140170200

157177197235270

139159179217252

110125140170200

102.4117.4132.4162.4192.4

16.121.929.545.970.4

1,7802,1502,7504,7508,480

100150200250300350400450

214

314

414

514

14,900

22,400

29,800

37,300

29,100

76,000

101,000

104,000

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

4.12

2.76

2.16

1.77

9,420

31,800

75,400

147,000

322

HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

1,090

2,580

5,040

100150200250300350400450100150200250300350400450100150200250300350400450

0.77 1.21 1.64 2.08 2.52 2.95 3.39 3.82 0.51 0.80 1.09 1.38 1.68 1.97 2.26 2.55 0.38 0.60 0.82 1.04 1.26 1.47 1.69 1.91 0.31 0.48 0.65 0.83 1.00 1.18 1.35 1.53

19.3 21.6 23.9 26.2 28.5 30.8 33.1 35.5 19.8 22.1 24.4 26.7 29.0 31.3 33.7 36.0 20.3 22.6 24.9 27.2 29.5 31.8 34.2 36.5 20.8 23.1 25.4 27.7 30.0 32.3 34.7 37.0

3,4003,4803,5703,6503,7403,8203,9103,9903,4703,5503,6403,7203,8103,8903,9804,0603,5403,6203,7103,7903,8803,9604,0504,1303,6103,6903,7803,8603,9504,0304,1204,200

4.00×106

3.59×106

3.25×106

2.97×106

2.73×106

2.53×106

2.36×106

2.21×106

5.23×106

4.54×106

4.01×106

3.60×106

3.26×106

2.98×106

2.74×106

2.54×106

6.18×106

5.24×106

4.55×106

4.02×106

3.60×106

3.26×106

2.98×106

2.74×106

6.94×106

5.77×106

4.95×106

4.33×106

3.84×106

3.46×106

3.14×106

2.88×106



Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies

HIJKL

120120120140140

125140170200240

177197235270300

155175213248278

125140170200230

117.4132.4162.4192.4222.4

21.5 28.7 48.7 70.0102.2

3,160 3,740 5,860 9,44015,100

100150200250300350400450

216

316

416

516

23,900

35,800

47,700

59,600

46,600

121,000

162,000

170,000

8.72×10-3

5.81×10-3

4.36×10-3

3.49×10-3

4.82

3.21

2.51

2.05

15,100

50,800

121,000

235,000

377

1,270

3,020

5,890

100150200250300350400450100150200250300350400450100150200250300350400450

0.76 1.19 1.63 2.07 2.50 2.94 3.38 3.81 0.50 0.79 1.09 1.38 1.67 1.96 2.25 2.54 0.38 0.59 0.81 1.03 1.25 1.47 1.69 1.90 0.30 0.47 0.65 0.82 1.00 1.17 1.35 1.52

26.8 29.9 33.0 36.1 39.3 42.4 45.5 48.6 27.6 30.7 33.8 36.9 40.1 43.2 46.3 49.4 28.4 31.5 34.6 37.7 40.9 44.0 47.1 50.2 29.2 32.3 35.4 38.6 41.7 44.8 47.9 51.0

6,3306,4906,6606,8206,9907,1507,3207,4806,4806,6506,8106,9807,1407,3107,4707,6406,6306,8006,9607,1307,2907,4607,6207,7906,7906,9507,1207,2807,4507,6107,7807,940

6.72×1066.10×1065.59×1065.16×1064.79×1064.47×1064.19×1063.94×1068.92×1067.86×1067.04×1066.36×1065.81×1065.35×1064.95×1064.61×1061.07×1079.19×1068.08×1067.21×1066.50×1065.93×1065.44×1065.03×1061.21×1071.02×1078.87×1067.83×1067.00×1066.34×1065.79×1065.33×106

HubBase bore Do

mmMax bore D

mmD1

mmD2

mmL1

mmL2

mmMass

kgInertiakg-cm2

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies


1.09 2.25 3.42 4.58 5.74 6.91 0.82 1.69 2.56 3.43 4.31 5.18 0.64 1.34 2.03 2.73 3.43 4.13

1.08×107

7.84×106

6.15×106

5.06×106

4.30×106

3.73×106

1.27×107

8.78×106

6.71×106

5.43×106

4.56×106

3.93×106

1.63×107

1.13×107

8.66×106

7.01×106

5.89×106

5.08×106

42.4 56.8 71.1 85.5 99.8

114.2 43.5 57.8 72.2 86.6

100.9 115.3

52.2 72.2 92.3

112.3 132.3 152.3

11,50012,60013,80014,90016,00017,20011,80012,90014,00015,10016,30017,40013,20014,70016,10017,60019,00020,500

200400600800

1,0001,200

200400600800

1,0001,200

200400600800

1,0001,200

318

418

518

48,100

64,100

80,100

68,300

162,000 3,330

316,000

1,400

6,500

163,000

217,000

272,000

5.81×10-3

4.36×10-3

3.49×10-3

3.54

2.80

2.27

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Mo

del

Num

ber

Sp

ecifi

c Fe

atur

e

Dia

phr

agm

Siz

e

Flex

Uni

t Le

ngth

Hub

s

Dia

phr

agm

Ser

ies


1.07 2.23 3.39 4.56 5.72 6.88 0.80 1.67 2.54 3.42 4.29 5.16 0.63 1.32 2.02 2.72 3.42 4.12

1.77×107

1.30×107

1.03×107

8.47×106

7.22×106

6.29×106

2.09×107

1.46×107

1.13×107

9.15×106

7.70×106

6.65×106

2.61×107

1.81×107

1.39×107

1.12×107

9.45×106

8.15×106

65.1 88.5

112.0 135.5 158.9 182.4

67.6 91.1

114.5 138.0 161.5 184.9

78.8 110.6 142.4 174.2 206.0 237.8

23,00024,90026,80028,80030,70032,60023,80025,70027,60029,60031,50033,40025,00027,30029,70032,00034,40036,700

200400600800

1,0001,200

200400600800

1,0001,200

200400600800

1,0001,200

322

422

522

91,900

123,000

153,000

116,000

276,000 3,700

538,000

1,560

7,220

312,000

416,000

520,000

5.81×10-3

4.36×10-3

3.49×10-3

4.80

3.75

3.06

DiaphragmType

Lmm


Angular def.±rad

Angular def.Nm/rad

Axial def.N/mm

TorsionalNm/rad

Parallel offsetmm

Axial def.±mm

RatedNm

UnitMass

kg

UnitInertiakg-cm2

Gas TurbinesSteam TurbinesCompressors

API671 Couplings High Speed and High Torque Applications

API671 Couplings • Model 67 / 99 – Low speed application

The hubs and flex unit are centered by the reamer bolts.• Model 74 / 100 – High speed application

The hubs and flex unit are centered by means of piloted guard. The hub and flex unit O.D. and the piloted guard I.D. are interference fitted for easy alignment.

Diaphragm MaterialsModel 67 / 74 – Special alloy steel Model 99 / 100 – Special precipitation hardened stainless steel

Model 99 / 100 couplingsCompared to the model 67 / 74, they offer:◆ Greater allowable maximum continuous torque in the same

diaphragm◆ Reduced diaphragm size and reduced moment◆ Increased corrosion protection

305

405

505

605

306

406

506

606

308

408

508

608

310

410

510

610

312

412

512

612

314

414

514

614

1,500

2,000

2,500

3,000

2,960

3,950

4,930

5,920

6,600

8,800

11,000

13,200

12,400

16,500

20,600

24,700

22,500

30,100

37,600

45,100

33,600

44,800

55,900

67,100

3,400

4,530

5,660

6,800

6,710

8,950

11,100

13,400

14,900

19,900

24,900

29,900

28,000

37,300

46,700

56,000

51,100

68,100

85,200

102,000

76,100

101,000

126,000

152,000

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

1.60

1.24

1.01

0.85

1.91

1.50

1.23

1.05

2.54

1.99

1.63

1.38

2.95

2.35

1.95

1.66

3.84

3.01

2.47

2.09

4.23

3.35

2.76

2.35

34,000

39,000

44,000

48,000

29,000

33,000

37,000

41,000

24,000

28,000

31,000

34,000

21,000

24,000

27,000

30,000

18,000

21,000

23,000

26,000

16,000

19,000

21,000

24,000

100/180　

1,250〜

100/180　

1,250〜

100/180　

1,250〜

150/240　

1,250〜

150/240　

1,250〜

※3

※3

※3

※3

※3

155.2

183.2

234.6

279.0

333.0

70

85

120

150

185

44

60

82

101

120

14

14

14

14

14

150/240　

1,250〜 ※3 377.4 210 136 14

DiaphragmType

Transmitting Torque Misalignment ※2

LimitNm

Angular def.±rad

Parallel offsetmm

RatedNm

Tube ODφCmm

L1mm

67/74 L ※1

mm

　Limit ※4

Speedrpm

Coupling OD　φA ※5

mm

Max bore　φB ※6

mmAxial def.

±mm

316

416

516

616

318

418

518

618

322

422

522

622

53,700

71,600

89,500

107,000

72,100

96,200

120,000

144,000

138,000

184,000

230,000

276,000

121,000

162,000

202,000

243,000

163,000

218,000

272,000

327,000

312,000

416,000

521,000

625,000

4.69

3.77

3.14

2.68

4.97

4.04

3.39

2.90

7.65

5.99

4.91

4.16

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

4.36×10-3

3.49×10-3

2.90×10-3

2.49×10-3

15,000

17,000

19,000

21,000

14,000

16,000

18,000

20,000

12,000

14,000

15,000

17,000

150/240　

1,250〜

200/300　

1,250〜

200/300　

1,250〜

※3

※3

※3

433.1

479.4

568.3

245

265

330

162

193

206

14

14

14

DiaphragmType


LimitNm

Angular def.±rad

Parallel offsetmm

RatedNm

Tube ODφCmm

L1mm

67/74 L ※1

mm

　Limit ※4

Speedrpm


mm

Max bore　φB ※6

mmAxial def.

±mm

※1 Contact us if the Flex Unit length required is beyond its range specified. ※2 Contact us if the misalignment required is higher than listed.※3 The allowable parallel offset is determined by equation: L x tan θ Where L is a flex unit length（mm） θ is an angular deflection（deg）※4 The limit speed listed is at an axial deflection of ±0mm. ※5 The coupling OD（øA） shows the outside diameter of Model 74. For that of Model 67（øA”）, it is calculated by equation: øA ‒ 9.1 ※6 The value listed shows the maximum bore diameter for each coupling type. Contact us if the shaft dimension is greater than that. The hub is custom made so advise us of its dimension.

305

405

505

605

306

406

506

606

308

408

508

608

310

410

510

610

312

412

512

612

314

414

514

614

3,280

4,290

5,420

6,550

6,430

8,580

10,700

12,800

14,300

19,100

23,900

27,700

26,900

35,800

44,800

53,900

49,100

65,500

81,900

98,100

73,000

97,300

122,000

146,000

4,350

5,690

7,200

8,700

8,550

11,300

14,100

17,000

19,000

25,300

31,700

36,700

35,600

47,500

59,500

71,600

65,300

87,000

108,000

130,000

96,900

128,000

160,000

194,000

1.24

1.01

0.81

0.66

1.52

1.19

1.01

0.83

1.91

1.60

1.29

1.19

2.18

1.82

1.47

1.27

2.66

2.20

1.85

1.57

2.92

2.46

2.05

1.72

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

35,000

40,000

45,000

50,000

28,000

33,000

38,000

43,000

23,000

28,000

33,000

35,000

20,000

25,000

28,000

30,000

19,000

22,000

25,000

27,000

17,000

20,000

23,000

25,000

100/180　

1,250〜

100/180　

1,250〜

100/180　

1,250〜

150/240　

1,250〜

150/240　

1,250〜

※3

※3

※3

※3

※3

155.2

183.2

234.6

279.0

333.0

70

85

120

150

185

55.6

71

96.5

119.5

148.5

14

14

14

14

14

150/240　

1,250〜 ※3 377.4 210 168.9 14

DiaphragmType


PeakNm

Angular def.±rad

Parallel offsetmm

RatedNm

Tube ODφCmm

L1mm

99/100 L ※1

mm

　Limit ※4

Speedrpm


mm

Max bore　φB ※6

mmAxial def.

±mm

316

416

516

616

318

418

518

618

322

422

522

622

116,000

155,000

194,000

232,000

157,000

210,000

262,000

314,000

299,000

399,000

499,000

599,000

152,000

205,000

257,000

308,000

207,000

278,000

348,000

416,000

397,000

530,000

662,000

796,000

3.20

2.71

2.28

1.93

3.75

3.17

2.69

2.31

4.36

3.75

3.25

2.74

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

5.81×10-3

4.36×10-3

3.49×10-3

2.90×10-3

15,000

17,000

20,000

22,000

14,000

16,000

19,000

21,000

12,000

14,000

16,000

19,000

150/240　

1,250〜

200/300　

1,250〜

200/300　

1,250〜

※3

※3

※3

433.1

479.4

568.3

245

265

330

199.4

222.3

279.3

14

14

14

DiaphragmType


PeakNm

Angular def.±rad

Parallel offsetmm

RatedNm

Tube ODφCmm

L1mm

99/100 L ※1

mm

　Limit ※4

Speedrpm


mm

Max bore　φB ※6

mmAxial def.

±mm

※1 Contact us if the Flex Unit length required is beyond its range specified. ※2 Contact us if the misalignment required is higher than listed.※3 The allowable parallel offset is determined by equation: L x tan θ Where L is a flex unit length（mm） θ is an angular deflection（deg）※4 The limit speed listed is at an axial deflection of ±0mm. ※5 The coupling OD（øA） shows the outside diameter of Model 100. For that of Model 99（øA”）, it is calculated by equation: øA ‒ 9.1 ※6 The value listed shows the maximum bore diameter for each coupling type. Contact us if the shaft dimension is greater than that. The hub is custom made so advise us of its dimension.

Special Features

Non-Ferrous Metal

Torque Monitoring System

System Arrangement

StationaryReading Head

StationaryReading Head

StatorJunction Box

Monitor

StationaryAntenna

Strain Gauge

Special Features

For quick response, we would kindly ask you to fill this form and send to us by fax or e-mail.

Phone

⇒ DWG No.:

（Ex. API610, API671, JIS G 1.0 …）

⇒ Scope

Power（kW）

Speed（rpm）

Torque（Nm）

Normal Maximum Transient Continuous Cyclic

API671

API610

Edition

Edition

ISO10441

ISO14641

Edition

Edition

Others:

Trip

⇒ Standard :

Mass

Moment of Inertia

Torsional Stiffness

Max. O.D.

Requirement

kg

kg-cm2

Nm/rad

mm

rad

mm

mm

Note :

Flex Unit OnlyHub（Driver Side）Hub（Driven Side）Assembly BalanceAssembly Check

Contact Person

Angular Deflection

Parallel Offset

Axial Deflection※1

Others

＋←→－－←→＋※1

V ※2 DBSE ※3

※2：Effective Length※3：Distance Between Shaft Ends

T（1/？）（Taper）

Lock Nut

LD

S1 S2

S3

X

SD Y

■Shaft Dimensions

Inside Diameter Straight mm

　　　　 Taper（LD） mm

Fit □ Keyed □ Hydraulic

Key Dimension □ Single Key □ Double Key

Key Width W mm

H1 mm

Key Height H2 mm

H3 mm

Radius R mm

□ Key is parallel to shaft

□ Key is parallel to taper

Straight mm

　　　　 Taper（LD） mm

□ Keyed □ Hydraulic

□ Single Key □ Double Key

Key Width W mm

H1 mm

Key Height H2 mm

H3 mm

Radius R mm

□ Key is parallel to shaft

□ Key is parallel to taper

Driver Side　　　　　　　　　　　　　　　　　　　Driven Side

LD mm mm

SD mm mm

S1 mm mm

S2 mm mm

S3 mm mm

T（1/?）

X mm mm

Y mm mm

V mm mm

DBSE mm

Driver Side Driven Side

Single Key Double Key Key is parallel to shaft

RW

H1

H2

H3

R

φ I.D.

RW

H1

H2

R

φ I.D.

（I.D.）

Key is parallel to taper

Saudi ArabiaEagleBurgmann Saudi Arabia Co., Ltd.Al Fahya Industrial Area, Azizyah Road P.O. Box 77148 Al Khobar 31952, Near Saudi Lucy, Saudi ArabiaPhone: +96-63-890 6111 Fax: +96-63-8 90 6222

U.A.E.EagleBurgmann Middle East, FZEP.O. Box 61310, Jebel Ali United Arab Emirates, DubaiPhone: +971-4-8 83 88 41 Fax: +971-4-8 83 88 43

TurkeyEagleBurgmann Endüstryiel Sizdirmazlik Sanayi Ve Ticaret Ltd. Sti.Istanbul Tuzula Kimya Sanayicileri Organize Sanayi Bölgesi Melek Aras BulvarıTuna Cad. No:8 34956 Tuzla / İstanbulPhone: +90-216-5 93 02 93Fax: +90-216-5 93 02 98

South AfricaEagleBurgmann Seals South Africa (PTY.) Ltd.P.O.Box 1210 Edenvale, 1610 Gauteng, South AfricaPhone: +27 11 457 9100 Fax: +27 11 609 1600

■Africa ■Middle East

AustriaEagleBurgmann Austria GmbHVogelweiderstraße 44a, A-5020 SalzburgPhone: +43-662-82 57 01 Fax: +43-662-82 57 03

BelgiumEagleBurgmann Belgium B.V.B.A.Zagerijstraat 11, B-2960 Sint-Job-in’t-GoorPhone: +32-3-6 33 99 44 Fax: +32-3-6 33 99 49

Czech RepublicEagleBurgmann Czech s.r.o.Na Drahach 1364, CZ-15600 Praha 5 ZbraslavPhone: +420-2-57 92 05 05 Fax: +420-2-57 92 05 08

DenmarkEagleBurgmann Expansion Joint SolutionsPark Alle 346600 Vejen DenmarkPhone: +45 7536 1811 Fax: +45 7536 1532

FinlandKE-Burgmann Finland OyPL 139(Ensimmäinen Savu)FIN-01511 VANTAAFinlandPhone: +358 9 8255 01 Fax: +358 9 8255 0200

FranceEagleBurgmann France S.A.S.Zone d’Activité les Perriers, 106/108 Route de Cormeilles, BP 96, F-78505SartrouvillePhone: +33-1-30 86 5029 Fax: +33-1-39 15 16 07

GermanyEagleBurgmann Germany GmbHÄussere Sauerlacher Str. 6-10, 82502 WolfratshausenGermanyPhone: +49 8171 231332　Fax: +49 8171 231447

Great BritainEagleBurgmann Industries UK LP12, Welton Road, Wedgnock Industrial Estate, GB-Warwick CV34 5PZPhone: +44-1926-41 76 00 Fax: +44-1926-41 76 17

HungaryEagleBurgmann Hungária Kft.Lejtö utca 6, H-1124 BudapestPhone: +36-1-3 19 81 31 Fax: +36-1-3 19 81 25

ItalyEagleBurgmann Italia s.r.l.Viale Martiri della Liberazione, 12, I-23875 Osnago (LC)Phone: +39-039-95 22 501 Fax: +39-039-928 94 83

BT-Burgmann S.P.A.Via Meucci, 58, I-36057 Arcugnano (Vi)Phone: +39-0444-28 89 77 Fax: +39 0444-28 86 93

NetherlandsEagleBurgmann Netherlands B.V.Koningsschot 9, NL-3905 PP Veenendaal,NetherlandsPhone: +31-318-54 20 00 Fax: + 31-318-54 15 35

NorwayEagleBurgmann Norway ASP.O. Box 143, Industriveien 25 D, N-2021 SkedsmokorsetPhone: +47-64-83 75 50 Fax: +47-64-83 75 75

PolandEagleBurgmann Poland Sp. z.o.o.Aleje Jerozolimskie200PL-02-486 WarsazawPolandPhone: +48-22-535-16 00 Fax: +48-22-535-16 48

RussiaEagleBurgmann000Ul. Zheleznodorozhnaya, 1, Str. 45606524 Zavolzhye, Gorodetsky District,Nizhny Novgorod regionPhone: +7-83169-305 58 Fax: +7-831 6 93 05 59

RomaniaEagleBurgmann RO SRLBdul. Iuliu Maniu Nr. 7Cladirea E, Parter,Hala 3, Sector 6061072 BucurestiRomaniaPhone: +40 31 425 0909 Fax: +40 31 425 0910

SpainEagleBurgmann Ibélrica S.A.Avda. De Quitapesares, 40, E-28670 Villaviciosa de Odón, MadridPhone: +34-91-616 66 01 Fax: +34-91-616 66 81

SwedenEagleBurgmann Sweden ABSvärmaregatan 3, S-60361 NorrköpingPhone: +46-11-14 00 05 Fax: +46-11-14 00 15

SwitzerlandEagleBurgmann (Switzerland) AGHofstrasse 21, CH-8181 HoeriPhone: +41 44 872 3930 Fax: +41 44 872 3940

■Europe

EagleBurgmann Network

Your nearest EagleBurgmann representativeYour nearest EagleBurgmann representative

Japan EagleBurgmann Japan Co., Ltd.1-12-15, Shiba-Daimon, Minato-ku, Tokyo, 105-8587, JapanPhone: +81-3-3432-0188　Fax: +81-3-3432-5448http://www.eagleburgmann.com

Head Office Germany EagleBurgmann Germany GmbHÄussere Sauerlacher Str. 6-10, 82502 WolfratshausenGermanyPhone: +49 8171 231332　Fax: +49 8171 231447

Head Office

ArgentinaEagleBurgmann ArgentinaCatalina M. de Boyle, 3117CEP-1650, San Martin – SP, ArgentinaPhone: +54-11-4754-6373 Fax: +54-11-4754-6373

BrazilEagleBurgmann do Brasil Vedaçoes Industriais Ltda.Av. Sta. Izabel, 1721, CEP – 13084-643 Barao Geraldo, Caixa Postal 6560, Campinas – Sao PauloPhone: +55-19-37 49 97 40 Fax: +55-19-37 49 97 42

CanadaEagleBurgmann Canada Inc.8699 Escarpment Way,Units L9T 0J5, Milton, Ontario Canada Phone: +1-905-693-8782 Fax: +1-905-693-0535

MexicoEagleBurgmann Mexico S.A. de C.V.Calzada de Guadalupe, Num. 350-6. Col. El Cerrito, C.P. 54720, Cuautitlán Izcalli, Estado de México Phone: +52-55-58 72 53 93 Fax: +52-55-58 72 64 93

USAEagleBurgmann Industries LP10035 Brookriver Dr., Houston, Texas 77040Phone: +1-713-939 9515 Fax: +1-713-939 9109

VenezuelaEagleBurgmann Venezuela, C.A.Calle 6 con Calle 9, Edif. Fant Piso 2,La Urbina Caracas, Dtto. Sucre, 1073 Edo. Miranda, VenezuelaPhone: +58- 212-2 42 15 48 Fax: +58-212-2 42 45 44

■Americas

AustraliaEagleBurgmann Australia Pty. Ltd.16 Stennett Road2565 Ingleburn, Australia Phone: +61 2 9605 6444 Fax: +61 2 9829 6958

ChinaEagleBurgmann (Wuxi) Co., Ltd.No.9, Lijiang Road, Wuxi, Jiangsu, P.R.China, 214028Phone: +86 510 8534 6107 Fax: +86 510 8534 6101

Burgmann Shanghai Ltd.No. 127-8 Wenjing Road, Min Hang,Shanghai, P.R.China, 200245Phone: +86-21-6462-0550 Fax: +86-21-61-6430-0219

Burgmann Dalian Ltd.P.R.China, 116620Phone: +86-411-8758-1371 Fax: +86-411-8758-1426

EagleBurgmann Trading (Shanghai) Co., Ltd.Room.1006-1007, Block 6, No.3611, Zhangyang Road, Pudong, Shanghai, P.R.China, 200136Phone: +86-21-6156-3200 Fax: +86-21-6156-3210

IndiaEagleBurgmann India Pvt LtdPlot No.64, Survey No 91/B Ramtekadi Industrial Estate, Hadapsar, Pune, 411013 Pune, IndiaPhone: +91-20-2681-2901 Fax: +91-20-2681-2915

EagleBurgmann Mascot India Private Ltd.B-32, Opposite ASB, Additional Ambernath MIDC,Ambernath-421506, MaharashtraPhone: +91 251 2620229

IndonesiaP.T. EagleBurgmann IndonesiaJl. Jababeka Blok J6-E, Kawasan Industri Cikarang, P.O. Box – 46,Lippo Cikarang Bekasi 17550 – JawaBarat, IndonesiaPhone: 0062 21 8935313 Fax: 0062 21 8935315

KoreaEagleBurgmann Korea Co.,Ltd.376-4, Gajang-dong, Osan-si, 447210 Kyungki-Do, KoreaPhone: +82 31 664 4095 Fax: +82 31 664 4094

MalaysiaEagleBurgmann (Malaysia) Sdn.BhdNo. 7, Lorong SS13/6B, Subang Jaya Industrial Estate, MAL-47500 Petaling Jaya, Selangor, daurl Ehsan Malaysia.Phone: +60-3563 48624 Fax: +60-3563 54118

New ZealandEagleBurgmann New Zealand Ltd.P.O. Box 300858, Albany, North Shore City, 0752New ZealandPhone: +64 9 448 5001 Fax: +64 9 415 0599

PhilippinesEagleBurgmann Philippines Inc. 9769 National Road, Maduya, 4116 Carmona, Cavite, PhilippinesPhone: +63 2 666 2770 Fax: +63 46 430 1428

SingaporeEagleBurgmann Singapore Pte. Ltd.15 Tukang Innovation Drive, Singapore 618299, SingaporePhone: +65 663 13172 Fax: +65 6481 3943

EBI Asia Pacific Pte. Ltd.Regional Office15 Tukang Innovation Drive, Singapore 618299, SingaporePhone: +65-6565-6623 Fax: +65-6565-9663

TaiwanEagleBurgmann Taiwan Co. Ltd.No.1-30, Hsi-Lin Road, Yenchao 824, Kaohsiung, Taiwan, R.O.C.Phone: +886-7-616-4401 Fax: +886-7-616-6486

ThailandEagleBurgmann (Thailand) Co., Ltd.Banga-Tower C, Floor 12th, 40/14 Moo 12 Banga-Trad Rd., K.m. 6.5, Banglaew, Bangplee, Samutprakarn 10540Phone: +66-275 19623 Fax: +66-275 19628

VietnamEagleBurgmann Vietnam Company Ltd.6th Floor, Suite No. 6B2, International Plaza 343 Pham Ngu Lao Street, Pham Ngu Lao Ward, District 1, HoChiMinh City,VietnamPhone: +84-8-6291-5648 Fax: +84-8-6291-5649

■Asia & Oceania

Argentina · Australia · Austria · Belarus · Belgium · Bulgaria · Brazil · Canada · Chile · China · Colombia · Cyprus · Czech Republic · Denmark · Ecuador · Egypt · Estonia Finland · France · Germany · Great Britain · Greece · Hungary · India · Indonesia · Irak · Iran · Israel · Italy · Japan · Jordan · Kazakhstan · Korea · Kuwait · Latvia · Libya Lithuania · Malaysia · Mauritius · Mexico · Morocco · Myanmar · Netherlands · New Zealand · Nigeria · Norway · Oman · Pakistan · Paraguay · Peru · Philippines · Poland Qatar · Romania · Russia · Saudi Arabia · Singapore · Slovenia · Slovakian Republic · South Africa · Spain · Sweden · Switzerland · Syria · Taiwan · Thailand · Trinidad and Tobago · Tunisia · Turkey · Turkmenistan · Ukraine · United Arab Emirates · Uruguay · USA · Uzbekistan · Venezuela · Vietnam · www.eagleburgmann.com/world

EagleBurgmann is one of the leading international companies for industrial sealing technology. Ourproducts are used everywhere that safety and reliability are important: In the oil and gas industries,petroleum refi ning, chemicals, energy, food, paper, water, marine applications, aerospace and mining.Every day, more than 5000 employees contribute their ideas, solutions and commitment to ensuringthat customers all over the world can rely on our seals. Our modular seal service, TotalSealCare™,underlines our commitment to customer orientation and our provision of tailor-made services forevery application.

EagleBurgmann Japan Co.,Ltd.

Head Office1-12-15, Shiba-Daimon, Minato-ku, Tokyo, 105-8587, JapanPhone: +81-3-3432-0188 Fax: +81-3-3432-5448

Documents

Maximum Performance Contoured Diaphragm Couplings€¦ · Diaphragm Type 210・310・410・510 ... If API 671 coupling is specified without any other requirements, ... 5.97×104 5.39×104