Embed Size (px)
SP
EC
SH
EE
TS
PE
C S
HE
ET
KEY FEATURESHandy, lightweight, powerful, tablet-inspired design
7-inch, outdoor-enhanced touchscreen – the biggest in the handheld industry
12-hour autonomy
Dead zones: EDZ 0.8 m, ADZ 3.5 m
Dynamic range: 39/37/37 dB
Rugged design built for outside plant
iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task
APPLICATIONS FTTx/MDU test challenges within PON networks
Access network testing (P2P)
Metro links testing (P2P)
Live fi ber troubleshooting
MaxTester 730B PON/METRO OTDR
Fully featured, entry-level, dedicated OTDR with tablet-inspired design, suitable for metro and optimized to test through optical splitters, for seamless end-to-end FTTH characterization and troubleshooting.
Data Post-Processing SoftwareFastReporter 2
Fiber Inspection ProbeFIP-400B
Soft Pulse Suppressor BagSPSB
COMPLEMENTARY PRODUCTS AND OPTIONS
OPTIMIZED FOR FTTX/MDU FIBER DEPLOYMENTS AND TROUBLESHOOTING, SUITABLE FOR METRO
MaxTester 730B FTTx/MDU PON OTDR
THE HANDHELD OTDR... REINVENTED.The MAX-700B series is the first tablet-inspired OTDR line that is handy, lightweight and rugged enough for any outside plant environment. With a 7-inch, outdoor-enhanced touchscreen–the most efficient handheld display in the industry–it delivers an unprecedented user experience. Its intuitive Windows-like GUI ensures a fast learning curve. Plus, its new and improved OTDR2.0 environment offers icon-based functions, instant boot-up, automatic macrobend finders as well as improved auto and real-time modes.
The Max-700B series is a line of genuine high-performance OTDRs from the world’s leading manufacturer. It delivers EXFO’s tried and true OTDR quality and accuracy along with the best optical performance for right-first-time results, every time.
The amazing 12-hour battery life will never let a technician down, and the plug-and-play hardware options, like the VFL, power meter and USB tools, make every technician’s job easier.
Most importantly, the Max-700B series is finally bringing the iOLM, an intelligent OTDR-based application, to the handheld market. This advanced software turns even the most complex trace analysis into a simple, one-touch task.
Ultimately, the Max-700B series is small enough to fit in your hand and big enough to fit all your needs!
THE ENTRY-LEVEL SOLUTION DESIGNED FOR ALL YOUR TESTING NEEDSThe MAX-730B OTDR/iOLM is optimized to test through optical splitters up to 1x128, ensuring complete end-to-end FTTH characterization. The 1625-nm, out-of-band, live testing port enables the efficient troubleshooting of active networks without affecting the signal of other clients. Plus, the high dynamic range makes it suitable for Metro point-to-point testing.
Other models available :
› MAX-715B Short Access and FTTx Last-Mile installation and troubleshooting (30 dB)
› MAX-720B Access for any short network construction (36 dB)
REMOVING THE COMPLEXITY FROM THE OTDR
Using a unique and patented automated multipulse and multi-wavelength acquisition approach, the field-proven iOLM surpasses the traditional OTDR and linear view for expert-level link characterization of any fiber network.
This dynamic OTDR-based application uses EXFO’s most advanced algorithms to deliver detailed information and maximum resolution on every element of the link. Thanks to its unmatched intelligence and simplicity, the iOLM converts complex OTDR tests into clear and accurate go/no-go results, through a single button operation.
› Hardware optimized and intelligent software for maximum performance
› Multiple acquisitions, multiple wavelengths with one button—all automated
› Expert-level characterization results in a single, comprehensive report
› The fastest and hassle-free way to perform full fi ber characterization
› No training required: self-setting device with clear go/no-go results
› Minimized truck rolls, thanks to the smartest analysis, powered by Link-Aware™ technology
Three ways to benefit from the iOLM:
P o w e r e d b y
T E C H N O L O G Y
US patent 6,612,750
Launch multiple OTDR acquisitions
Analyze the traces
Compound the results
Display a schematic link view and prompt
diagnosis
OTDR combo (Oi code)
Run iOLM and OTDR applications on one unit
Upgrade
Add iOLM software option, even while in the field
iOLM only
Order a unit with the iOLM application only
MaxTester 730B FTTx/MDU PON OTDR
OPTICAL PLUG AND PLAY OPTIONS: The MaxTester features plug-and-play optical options that can be purchased whenever you need them, at the time of your order or later on. In either case, installation is a snap you can do it by your own, without any software update required.
OPTICAL POWER METERA high-level power meter (GeX) that can measure up to +27 dBm, the highest in the industry. This is essential for HFC networks or high-power signals. If used with an auto-lambda/auto-switching compatible light source, the power meter automatically syncs on the same wavelength avoiding any risk of mismatched measurement.
› Extensive range of connectors
› Auto-Lambda and Auto-Switching
› Offers measurement storage and reporting
› Seven standard calibrated wavelengths
VISUAL FAULT LOCATOR (VFL)The plug-and-play VFL easily identifies breaks, bends, faulty connectors and splices, in addition to other causes of signal loss. This basic, yet essential troubleshooting tool, should be part of every field technician’s toolbox. Visually locating faults by creating a bright-red glow at the exact location of the fault on singlemode or multimode fibers, it can detect faults over distances of up to 5 km. (Available with the Optical Power Meter only)
AUTOMATED AND INTELLIGENT FIBER INSPECTION PROBENeglecting to clean, inspect and certify connectors will lead to serious, time-consuming problems that account for up to 80% of network failures. Thanks to years of field experience, EXFO has been able to re-engineer a major, patent-pending, fiber-inspection probe, the FIP-400B, which is designed to both simplify and speed up this critical step of network construction.
When paired with ConnectorMax2, the FIP-400B can objectively analyze connector cleanliness based on IEC, IPC and user-defined standards. Plus, the auto-centering feature cuts inspection time in half, especially in patch panels and hard-to-reach connectors. This inspection tool, which is exclusive to EXFO, is equipped with a pass/fail LED indicator that provides a clear diagnosis in the palm of your hand.
MaxTester 730B FTTx/MDU PON OTDR
11 12 1310
PACKAGED FOR EFFICIENCY1 Singlemode OTDR port
2 In-service testing OTDR port
3 Testing LED indicator
4 Stylus
5 Power meter
6 Visual fault locator
7 10/100 Mbit/s Ethernet port
8 Two USB 2.0 ports
9 AC adapter
10 Home/switch application and screen capture (hold)
11 Power on/off/stand by
12 Battery LED status
13 Built-in Wi-Fi/Bluetooth
14 Stand support
31 2
7654 8 9
SOFTWARE UTILITIES Software update Ensure that your MaxTester is up-to-date with the latest software.
VNC configuration The Virtual Network Computing utility allows technicians to easily remote control the unit via a computer or laptop.
Microsoft Internet Explorer Access the Web directly from your device interface.
Data mover Transfer all your daily test results quickly and easily.
Centralized documentation Instant access to user guides and other relevant documents.
Wallpapers Enhance your work environment with colorful and scenic backgrounds.
PDF Reader View your reports in PDF format.
Bluetooth file sharing Share files between your MaxTester and any Bluetooth-enabled device.
Wi-Fi connection Upload test results and browse the internet.
Inspection probe USB probe to inspect and analyze connectors.
Power on/off/stand by
Battery LED status
Built-in Wi-Fi/Bluetooth
Stand support
14
MaxTester 730B FTTx/MDU PON OTDR
TECHNICAL SPECIFICATIONS MAXTESTER 730BDisplay 7 in (178 mm) outdoor-enhanced touchscreen, 800 x 480 TFT
Interfaces Two USB 2.0 portsRJ-45 LAN 10/100 Mbit/s
Storage 2 GB internal memory (20 000 OTDR traces, typical)
Batteries Rechargeable lithium-polymer battery12 hours of operation as per Telcordia (Bellcore) TR-NWT-001138
Power supply Power supply AC/DC adapter, input 100-240 VAC, 50-60 Hz, 9-16 V DCIN 15 Watts minimum
Wavelength (nm) b 1310/1550/1625
Dynamic range (dB) c 39/37/37
Event dead zone (m) d 0.8
Attenuation dead zone (m) e 3.5
Distance range (km) 0.1 to 400 km
Pulse width (ns) 5 ns to 20 us
Linearity (dB/dB) ±0.03
Loss threshold (dB) 0.01
Loss resolution (dB) 0.001
Sampling resolution (m) 0.04 to 5
Sampling points Up to 256 000
Distance uncertainty (m) f ±(0.75 + 0.0025 % x distance + sampling resolution)
Measurement time User-defined (60 min. maximum)
Reflectance accuracy (dB) ±2
Typical real-time refresh (Hz) 3
Laser safety 1M
SPECIFICATIONS a
Notes
a. All specifications valid at 23 °C ± 2 °C with an FC/APC connector, unless otherwise specified.
b. Typical.
c. Typical dynamic range with longest pulse and three-minute averaging at SNR = 1.
d. Typical, for reflectance below –55 dB, using a 5-ns pulse.
e. Typical, for reflectance below –55 dB, using a 5-ns pulse. Attenuation dead zone at 1310 nm is 4.5 m typical with reflectance below –45 dB.
f. Does not include uncertainty due to fiber index.
MaxTester 730B FTTx/MDU PON OTDR
GENERAL SPECIFICATIONS
Size (H x W x D) 200 mm x 155 mm x 68 mm (7 7/8 in x 6 1/8 in x 2 ¾ in)
Weight (with battery) 1.29 kg (2.8 lb)
Temperature Operating Storage
–10 °C to 50 °C (14 °F to 122 °F)–40 °C to 70 °C (–40 °F to 158 °F) a
Relative humidity 0 % to 95 % noncondensing
VISUAL FAULT LOCATOR (VFL) (OPTIONAL)Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2
ACCESSORIESGP-10-092 Semi-rigid carrying case GP-2016 10-foot RJ-45 LAN cable
GP-10-093 Rigid carrying case GP-2144 USB 16G micro-drive
GP-302 USB mouse GP-2155 Carry-on size backpack
GP-1008 VFL adapter (2.5 mm to 1.25 mm) GP-2205 DC vehicle battery-charging adaptor (12 V)
GP-2001 USB keyboard GP-2207 Stand support
BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional) c
Calibrated wavelengths (nm) 850, 1300, 1310, 1490, 1550, 1625, 1650
Power range (dBm) d 27 to —50
Uncertainty (%) e ±5 % ± 10 nW
Display resolution (dB)0.01 = max to —40 dBm0.1 = —40 dBm to —50 dBm
Automatic offset nulling range d, f Max power to —34 dBm
Tone detection (Hz) 270/330/1000/2000
LASER SAFETY
CAUTION: VIEWING THE LASER OUTPUT WITH CERTAIN OPTICAL INSTRUMENTS (FOR EXAMPLE: EYE LOUPES, MAGNIFIERS AND MICROSCOPES) WITHIN A DISTANCE OF 100 MM MAY POSE AN EYE HAZARD.
Notes
a. –20 °C to 60 °C (–4 °F to 140 °F) with the battery pack.
b. Typical output power is given at 1550 nm.
c. At 23 ºC ± 1 ºC, 1550 nm and FC connector. With modules in idle mode. Battery operated after 20-minute warm-up.
d. Typical.
e. At calibration conditions.
f. For ±0.05 dB, from 10 °C to 30 °C.
LASER RADIATIONDO NOT STARE INTO BEAMCLASS 2 LASER PRODUCT
λ: 650 ±10 nmPout maximum < 2 mW
IEC 60825-1:2007 21 CFR 1040.10 INVISIBLE LASER RADIATION
DO NOT VIEW DIRECTLYWITH OPTICAL INSTRUMENTSCLASS 1M LASER PRODUCT
λ: 1300-1400 nm, PW ≤ 20 µsec, Ppk ≤ 260 mW λ: 1400-1700 nm, PW ≤ 20 µsec, Ppk ≤ 600 mW
SOURCE (optional)Output power (dBm) b –2.5
Modulation CW, 1 kHz, 2 kHz
EXFO Headquarters > Tel.: +1 418 683-0211 | Toll-free: +1 800 663-3936 (USA and Canada) | Fax: +1 418 683-2170 | [email protected] | www.EXFO.com
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact.
EXFO is certified ISO 9001 and attests to the quality of these products. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at www.EXFO.com/specs.
In case of discrepancy, the Web version takes precedence over any printed literature.
Keep this document for future reference.
MaxTester 730B FTTx/MDU PON OTDR
ORDERING INFORMATION
ModelM1 = FTTx/MDU PON, 1310/1550 nm (9/125 μm) M2 = FTTx/MDU PON, 1310/1550 nm and1625 nm live port (9/125 μm)M3 = FTTx/MDU PON, 1310/1550/1625 nm (9/125 μm)
ConnectivityRF = With RF capability (Wi-Fi and Bluetooth)
ConnectorEA-EUI-28 = APC/DIN 47256EA-EUI-89 = APC/FC narrow keyEA-EUI-91 = APC/SCEA-EUI-95 = APC/E-2000EA-EUI-98 = APC/LCEI-connectors = See note below
OTDR software optionsOTDR = Enables OTDR application onlyiOLM = Enables the iOLM application only Oi = Enables OTDR and iOLM applications
SPMAX730B.1AN © 2013 EXFO Inc. All rights reserved. 2008
Printed in Canada 13/11
MAX-730B-XX-XX-XX-XX-XX-XX-XX-XX
Example: MAX-730B-M1-EA-EUI-91-Oi-VPM2X-FOA-22-SRC
Software options00 = Without any software optionSRC = Source through OTDR port
Connector adapter a
FOA-12 = BiconicFOA-14 = NEC D4: PC, SPC, UPCFOA-16 = SMA/905, SMA-906FOA-22 = FC/PC, FC/SPC, FC/UPC, FC/APCFOA-28 = DIN 47256, DIN 47256/APCFOA-32 = ST: ST/PC, ST/SPC, ST/UPCFOA-54 = SC: SC/PC, SC/SPC, SC/UPC, SC/APCFOA-78 = Radiall ECFOA-96B = E-2000/APCFOA-98 = LCFOA-99 = MU
Power meter00 = Without power meterPM2X = Power meter; GeX detectorVPM2X = VFL and power meter; GeX detector
Inspection Probe00 = Without probeFP410B = Digital video inspection probe, triple magnificationFP420B = Digital video inspection probe b
Note
a. If power meter is selected.
b. Includes ConnectorMax2 analysis software, triple magnification and auto-centering feature.
EI CONNECTORS
To maximize the performance of your OTDR, EXFO recommends using APC connectors. These connectors generate lower reflectance, which is a critical parameter that affects performance, particularly in dead zones. APC connectors provide better performance than UPC connectors, thereby improving testing efficiency.
For best results, APC connectors are mandatory with the iOLM application.
Note: UPC connectors are also available. Simply replace EA-XX by EI-XX in the ordering part number. Additional connectors available are the EI-EUI-76 (UPC/HMS-10/AG) and EI-EUI-90 (UPC/ST).
