Power Solutions | 1700 Hicks Rd. Rolling Meadows, IL 60008 Methode.com/power

Methode Electronics Power Solutions

• High Current Capacity - Up To 400A

• Hot / Load Pluggable• Low Voltage Drop• UL 1977 Standard Compliant• CSA Standard C22.2 No. 182.3-

M1987 Compliant• RoHS Compliant

Insulator Polyester (PBT), UL 94 V-0

Contact Copper Beryllium Alloy (Selectively Gold Plated - Min. 30 μin, over Nickel)

Contact Holder / Conductor Mounting Copper Alloy (Gold Plated, over Nickel)

SPECIFICATIONS (BUS BAR TO BUS BAR)

Materials & Finish

Insertion Force 88N (20 lbf) Typical

Extraction Force 66N (15 lbf) Typical

Mechanical

Maximum Operating Current 400 A

Operating Current at 30 ° T-Rise 240 A

Insulator Voltage 600 VAC / 600 VDC

Load Pluggable Current 200 A at 12 V Open Circuit100 A at 60 V Open Circuit

Electrical

Maximum Operating Temperature 130°C

Storage Temperature -40°C to 130°C

Environmental

The MCC Bus Bar Clip Connector is a bus bar to bus bar connector having isolated opposing interconnects for two pole connections or combined single pole 400 Amp capacity. The connector base is open allowing bus bar feed through. Lead-in provides load-pluggable and current interruption capability using typical nickel, silver or gold surface.

REGULATORY SPECIFICATIONS

SAFETY: UL 1977, CSA Standard C22.2 No. 182.3-M1987 (UL File Number E303434)

RoHS: IEC Directive 2002/95/EC

MCC Bus Bar Clip Connector

��������������������������������

Power Solutions | 1700 Hicks Rd. Rolling Meadows, IL 60008 Methode.com/power

Methode Electronics Power Solutions

MCC CONNECTOR DRAWING

* CONNECTOR LEAD-IN GATHERING OF 2.5 MM [.10 INCH]. * RELIABLE MATE DEPTH (SEE SHEET 2). * TYPICAL CONNECTOR MATING FORCES OF 86 N [20 LBF].

NOTES: UNLESS OTHERWISE SPECIFIED

1. CONNECTOR NAMES AND PART NUMBERS:

NAME: MCC SOCKET CONNECTOR, BUS MOUNT SIZE 25.4 x 3.1 MM THICK MATING BLADE PART NUMBER: 5301-07134-00105

2. MATERIALS: INSULATOR: THERMOPLASTIC, UL 94 V-0 CONTACTS: COPPER ALLOY CONTACT HOLDERS: COPPER ALLOY

3. FINISHES:CONTACTS: GOLD PLATING OVER NICKEL UNDER PLATING

CONTACT HOLDERS: GOLD PLATING OVER NICKEL UNDER PLATING

4. REFERENCE DIMENSIONS IN PARENTHESIS (.XXX) ARE WITHOUT TOLERANCE AND USED FOR INFORMATION ONLY.

5. OPERATIONAL CONDITIONS

CONNECTOR PART NUMBERLISTED IN NOTE 1

DRAWING NUMBER BELOW IN TITLE BLOCK

BUS MOUNTED

D

C

B

12345678

8 567 4 3 2 1

E

F

AH. Han

PROPRIETARY AND CONFIDENTIAL NOTICE

ORIG:

CHECKED:

ENGR:

DATENAME

TITLE:

02/15/2013

MCC 3.1 MM BLADER. Larsen

N/A B

B

EDITORIAL UPDATE

SIZE

0.013X.XXX

TOLERANCES ARE:

R. Larsen

03/03/2011

03/03/2011

03/03/2011

SHEET 1 OF 2

DRAWING NUMBER:

5301-07134-00105

REV

C5301-07134-00105SCALE: 2:1

USER DRAWING, BUS CONNECTORDIMENSIONS ARE IN MILLIMETERS

POWER SOLUTIONS GROUP

ECO REV DESCRIPTION DATE

1750 Junction Avenue, San Jose, CA 95112 (408) 453-9500

METHODE ELECTRONICS, INC.

UNLESS OTHERWISE SPECIFIED

0.08X.XX

POWER SOLUTIONS GROUP.

C

TOLERANCES

DECIMALS ANGLES

APPROVAL OF METHODE ELECTRONICS, INC.

THIRD ANGLE PROJECTION

2.0

SURFACE FINISH: N/A

X.X 0.2 ALL INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY INFORMATION AND IS NOT TO BE DISTRIBUTED, COPIED, OR SHARED EXCEPT WITH PRIOR WRITTEN

FILENAME:

35.5 1.40

31.8 1.25

0.7719.5

1.0426.5

4.2

10.7 0.42

4x

2x

0.17

2x

25.4 1.00

1.0025.5

0.3910.0

3.4 0.13

- MCC CONNECTOR -PN: 5301-07134-00105

16.5 0.65FULL THICKNESS

BLADE DEPTHRECOMMENDED MINIMUM

A

B

C

D

345678

8 567 4 3

E

F

H. Han

PROPRIETARY AND CONFIDENTIAL NOTICE

ORIG:

CHECKED:

ENGR:

DATENAME

X.X 0.2X.XX 0.08X.XXX 0.013

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN MILLIMETERS

TOLERANCES ARE:

R. Larsen

03/03/2011

03/03/2011

03/03/2011

ECO REV

ALL INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY INFORMATION AND IS NOT TO BE DISTRIBUTED, COPIED, OR SHARED EXCEPT WITH PRIOR WRITTEN APPROVAL OF METHODE ELECTRONICS, INC. POWER SOLUTIONS GROUP.

TOLERANCES

DECIMALS ANGLES

THIRD ANGLE PROJECTION

2.0

SURFACE FINISH: N/A

EDITORIAL UPDATEN/A B

R. Larsen

MATING DEPTH

CHAMFER EDGE

MOUNTED CONNECTOR

RADIUS EDGE

3.10±0.10 0.122±0.004BLADE THICKNESS

25.40±0.38 1.000±0.015BLADE WIDTH

MOUNTING HOLE PATTERN

9.36 0.369

1.78 0.070

23.12 0.910

29.39 1.15716.5 0.65

FULL THICKNESSBLADE DEPTH

RECOMMENDED MINIMUM

C

D

8 567

E

F

MATING DEPTH

3.10±0.10 0.122±0.004BLADE THICKNESS

25.40±0.38 1.000±0.015BLADE WIDTH

ELECTRICAL PERFORMANCE

02468101214161820222426283032

0.0

10.0

20.0

30.0

40.0

50.0

60.0

70.0

80.0

150 175 200 225 250 275 300 325 350

V-D

rop

(mV)

T-R

ise

(°C

)

Applied Current (Amps)

T-Rise (°C)

V-Drop (mV)

Test Conditions:

Normalized graph shows MCC Connector electrical performance for temperature rise and voltage drop from 150 amps to 350 amps. Connector is mounted on copper conductor 44 x 6.3 mm. Copper bus interconnect 25 x 3.2 mm.

ORDERING INFORMATION

Part Number: 5301-07134-00105

sales@methode.com(847) 577-9545