2
MECHANIZED DERRICKMAN SYSTEM/MDS Racking board equipment to support physical handling with stands. • Stands reduce the level of intensive physical work required • Increases the personal safety of the derrickman • Easy remote control operation • Climate range -45°C to +55°C • Suitable for artic and desert environment • Suitable for onshore and offshore rigs • CE conformity • Customized design possible • ATEX conformity available as an option UNIQUE FEATURES

MECHANIZED DERRICKMAN SYSTEM/MDS...MECHANIZED DERRICKMAN SYSTEM/MDS Racking board equipment to support physical handling with stands. • Stands reduce the level of intensive physical

  • Upload
    others

  • View
    15

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MECHANIZED DERRICKMAN SYSTEM/MDS...MECHANIZED DERRICKMAN SYSTEM/MDS Racking board equipment to support physical handling with stands. • Stands reduce the level of intensive physical

MECHANIZED DERRICKMAN SYSTEM/MDSRacking board equipment to supportphysical handling with stands.

• Stands reduce the level of intensive physical

work required

• Increases the personal safety of the derrickman

• Easy remote control operation

• Climate range -45°C to +55°C

• Suitable for artic and desert environment

• Suitable for onshore and offshore rigs

• CE conformity

• Customized design possible

• ATEX conformity available as an option

UNIqUE FEATURES

Page 2: MECHANIZED DERRICKMAN SYSTEM/MDS...MECHANIZED DERRICKMAN SYSTEM/MDS Racking board equipment to support physical handling with stands. • Stands reduce the level of intensive physical

June

201

3

Bentec Russia Representation Office | 1. Kasatschij per. 7 | 119017 Moscow, Russia | Phone: +7 495 2344 238 or 239 | e-mail: [email protected]

Bentec GmbH Drilling & Oilfield Systems | Deilmannstrasse 1 | 48455 Bad Bentheim, Germany | Phone: +49 5922 7280 | e-mail: [email protected] | www.bentec.comLLC Bentec Tyumen, Russia | 2 km from Stary Tobolsky Trakt 8 a | 625014 Tyumen, Russia | Phone: +7 3452 683 900 | Service Hotline: +7 9220 076 554 | e-mail: [email protected]

Technical DaTa

Length: 250 in (6 341 mm)

Width: 90 in (2 296 mm)

Height: 86.2 in (2 190 m)

Weight (approx.) 5 952 lbs (2 700 kg)

Min. drill pipe diameter: 2 7/8 in (73 mm)

Max. drill pipe diameter: 6 5/8 in (153 mm

DIMENSIONS

OPERATION DATA

Electrical: 400/690 V AC - 50 or 60 Hz

Power rating 10 hp – 7.5 kW

POWER SuPPLy

(MDS can be customized to any racking board designs)

The Bentec MECHANIZED DERRICKMAN SySTEM (MDS) sup-ports the derrickman by guiding the top end of the stands to theracking fingers. A trolley moves along the rail and also consistsof tongs which grab the stands. The trolley moves the standsfrom the center of the well to the racking fingers, and vice versa.

The tongs rotate the stands both to and away from the driller.The tongs are operated hydraulically and controlled by a hydrauliccontrol cabinet.

The derrickman on the racking board operates the MDS byremote control, thus eliminating any risk to his or her safety.

The MDS can be installed onto existing racking boards. Only a few minor modifications need to be made to the racking boards so the MDS can be attached to the bottom side.

MechaniZeD DeRRicKMan SYSTeM / MDS

TECHNICAl DATA