4
DiCon’s MEMS Tunable Filter (Patent Pending) is a compact 2-port device based on DiCon’s proprietary MEMS technology. It de- multiplexes the incoming multi-wavelength signal and selects the desired wavelength channel using a tilting MEMS mirror as the tuning mechanism. The optical design is an extension of DiCon’s proven MEMS switch design, and therefore offers the same dura- bility, reliability, and stability. DiCon’s MEMS Tunable Filter is an ideal component for use in all wavelength selection and monitor- ing applications, and is particularly well-suited for applications requiring frequent or continuous tuning. Specifications subject to change. Copyright © 2007 DiCon Fiberoptics, Inc. All rights reserved. FEATURES Excellent MEMS durability, thermal stability, and repeatability Superior optical performance Compact form factor Gaussian-shaped passband 100 GHz and 50 GHz channel spacing filters offered Customized passbands and tuning ranges available I2C and RS232 control interface included APPLICATIONS Optical Channel Performance Monitoring ROADM Noise Suppression Signal Tracking MEMS TUNABLE FILTER

MEMS Tunable Filter MTF-B Specs Na

Embed Size (px)

Citation preview

Page 1: MEMS Tunable Filter MTF-B Specs Na

DiCon’s MEMS Tunable Filter (Patent Pending) is a compact 2-port device based on DiCon’s proprietary MEMS technology. It de-multiplexes the incoming multi-wavelength signal and selects the desired wavelength channel using a tilting MEMS mirror as the tuning mechanism. The optical design is an extension of DiCon’s proven MEMS switch design, and therefore offers the same dura-bility, reliability, and stability. DiCon’s MEMS Tunable Filter is an ideal component for use in all wavelength selection and monitor-ing applications, and is particularly well-suited for applications requiring frequent or continuous tuning.

Specifi cations subject to change. Copyright © 2007 DiCon Fiberoptics, Inc. All rights reserved.

featureSExcellent MEMS durability, thermal stability, and repeatabilitySuperior optical performanceCompact form factorGaussian-shaped passband100 GHz and 50 GHz channel spacing fi lters offeredCustomized passbands and tuning ranges availableI2C and RS232 control interface included

applicatiOnSOptical Channel Performance MonitoringROADMnoise SuppressionSignal Tracking

ideal component for use in all wavelength selection and monitor-ing applications, and is particularly well-suited for applications requiring frequent or continuous tuning.

memS tunable filter

Page 2: MEMS Tunable Filter MTF-B Specs Na

Optical SpecificatiOnS

mem

S tu

na

ble

filt

erSp

ecif

icat

iOn

S /

Ord

erin

g in

fOrm

atiO

n

DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfiberoptics.com

parameter ratingTuning Range 1530 to 1565 nmMin IL (@ Peak)

50GHz < 4.0 dB100 GHz < 3.0 dB

Ban

dwid

th 50 GHz @ 1 dB > 0.12 nm100 GHz @ 1 dB > 0.20 nm50 GHz @ 20 dB < 0.68 nm100 GHz @ 25 dB < 1.40 nm

Back Reflection > 40 dBPDL < 0.3 dBl Setting Error < +/- 30 pmTuning Resolution 10 pmTuning Speed < 30 msOptical Power < 500 mWDurability > 1 billion cyclesOperating Temp -5 to 70 oCStorage Temp -40 to 85 oCFiber Type 9/125 mm single mode

electrical SpecificatiOnSparameter ratingLatching Type non-latchingControl Type I2C and RS232Vcc Voltage 12 VDCPower Consumption < 1.4 WVcc Damage Threshold 15 VDC

mechanical dimenSiOnS(Units: mm)

Ordering infOrmatiOn

memS tunable filter

MTFPackaging Type

B with Control Board

Channel Spacing

Tuning Range

50 50G Hz100 100G Hz

15 1530-1565 nm

Fiber Type

9 9/125 mm single mode fiber

Connector Type

FC FC/SPCFC/ApC FC/ApCn nOnE

Pigtail Length

Jacket Type

1 1 MeterX Specify X Meters

2B 250 mm barefiber

B

Also Available: SC, SC/UPC, SC/APC, ST, ST/UPC, LC

0137A

9 2B

Custom Tuning Range Available Upon Special Request

15

Page 3: MEMS Tunable Filter MTF-B Specs Na

Specifi cations subject to change. Copyright © 2007 DiCon Fiberoptics, Inc. All rights reserved.

Optical SpectrumS

memS tunable filter

memS tunable filter, 50 ghZ

memS tunable filter, 100 ghZ

Page 4: MEMS Tunable Filter MTF-B Specs Na

Spectrum SWeep50 ghZ filter

mem

S tu

na

ble

filt

erO

ptic

al

Spec

tru

m &

per

fOm

an

ce

dat

a

DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfi beroptics.com

WaVelength Setting errOr OVer temperature(Sample data)

memS tunable filter

0137A