Merillat Express - Amazon S3...track it’s progress. Merillat Express Cancellation Policy Merillat Express cabinetry is made to order. That means we don’t start building your cabinets

Merillat Express™

Product Line Spec Book

Looking for Merillat Express™ sales support? These resources can help.

©2013 Masco Cabinetry LLC. Merillat Express™ 6/13. Legal:#178805

Masco Cabinetry LLC warrants to the original consumer purchaser that our Merillat Express™ cabinetry will be free from defects in material and workmanship under normal use for a period of TEN (10) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.

Masco Cabinetry LLC may elect to repair or replace any defective Merillat Express™ product covered by our warranty.THIS WARRANTY DOES NOT COVER:

• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation,

storage or handling.

As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.

Masco Cabinetry LLC further provides a Lifetime Limited Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Lifetime Limited Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.

From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some provinces and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty is only valid in the United States of America and Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and from province to province.

To obtain performance under this warranty, you must contact your Merillat Express™ supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Merillat Express™ Warranty Department, Masco Cabinetry LLC, 4600 Arrowhead Drive, Ann Arbor, Michigan 48105 USA

For cabinetry purchased on or after January 5, 2009

Masco Cabinetry LLC 10 Year Limited Warranty.

Merillat.comThis consumer-facing website offers many ways to inspire organizational solutions in beautiful cabinetry options, as well as drive business to our dealers. Here are some highlights:

• View inspirational designs and photos.• Download floor plan drawings from photosets to gather design ideas.• Visualize door styles by wood species and finish.• Use the “Features & Accessories for Your Lifestyle” to view

organizational solutions by room type.• Engage consumers by directing them to the “Step-by-Step Kitchen

Planner” to create a mood board to share with their designer.• Educate consumers about wood characteristics, installation, Merillat

sustainability initiatives, and dos and don’ts of cabinetry care.

MerillatBusiness.comIf you’re not currently registered for MerillatBusiness.com, you could be missing important product and brand information that can assist you with your Merillat sales efforts. It’s quick and easy, so visit the site and register today. It will enable you to:

• Check order status.• Download or order product literature, like the product brochure,

specification and price books, door/style finish codes, and 20-20 Design updates. (For questions on 20-20 Design, email [email protected].)

• Download promotional materials, such as brand campaign print ads, direct mail postcards, videos and counter cards.

• Order samples and displays, like wood chips, selection centers, and sample doors and backer cards.

Automated Orders proCAB™proCAB™ is an online, web-based, real-time order management solution available for Merillat Cabinetry product lines. Sign up today if you don’t already have an account. Benefits of proCAB™ are:

• Order Entry and Inquiry• Import Kitchen Designs from 2020• No Charge Shortage and Damage Ordering• Quote Order Capabilities• Expedite Requests• Shipment Status Inquiry• Product Inquiry Search• Document Imaging to retrieve copies of acknowledgements, invoices,

and shipping reports• ACH electronic payment of your invoices• Outstanding Invoices• View open and paid invoices• View check number that paid a specific invoice and payment receipts

For more information, please contact us directly at(866) 628-1621 or [email protected]

Order Confirmation and TrackingYou can monitor your order using Merillat Business or proCAB. Simply login to review your confirmation that your order has been received and to also track it’s progress.

Merillat Express™ Cancellation PolicyMerillat Express™ cabinetry is made to order. That means we don’t start building your cabinets until your order is placed. Due to our fast 5-day shipping schedule, orders are fulfilled as quickly as possible, affecting our ability to accept cancellations. To consistently maintain the quick 5-day shipping schedule, our policy is that orders cannot be canceled once placed.

Merillat Customer Care ResourcesElectronic means are convenient, but sometimes you just need to talk to a person, and Merillat Customer Care consultants are here to help. Your consultant can help you:

• Order product.• Follow up on orders or track delivery progress.• Discuss product situations or address invoice questions.

Your Merillat® Account Manager is there to help you … every step of the way. Make sure to contact them whenever you have questions, concerns or need information.

Additional assistance is available through Customer Care:(855) 896-9803 or [email protected] M-F 8:00 am – 6:00 pm EST For Order Placement:Fax (866) 998-4432 or [email protected]

Merillat® cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86. Merillat Cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA. All Merillat Cabinetry facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.

Table of Contents

Table of Contents

Table of Contents

Nomenclature Index i-iv

Code System 1-3

Door Styles A1-A2

Finishes B1-B2

Cabinet Specifications and Options C1-C6 Cabinet Specifications C1 Construction Options C2-C6

Wall Cabinets D1-D12 Wall Cabinets D1-D3 Wall Corner Cabinets D4-D7 Wall Open Cabinets D8 Wall Appliance Cabinets D9 Wall Accessories D10-D12

Base Cabinets E1-E18 Base Cabinets E1-E4 Base Sink Cabinets E5-E10 Base Corner Cabinets E11-E14 Base Accessories E15-E18

Tall Cabinets F1-F6 Tall Cabinets F1-F2 Tall Appliacne Cabinets F3-F4 Tall Accessories F5-F6

Vanity Cabinets G1-G8 Vanity Cabinets G1-G6 Vanity Accessories G7-G8

Office Cabinets H1-H2 Office Cabinets H1 Office Accessories H2

Panels-Shelving-Trays I1-I6 Panels I1 Shelving I2 Trays I3-I4 Tray Availability Charts I5-I6

Decorative Enhancements J1-J12 Supports & Valances J1 Moldings J2-J7 Decorative Hardware Knobs J8-J9 Decorative Hardware Pulls J10-J12

Replacement Parts K1-K26 Touch Up Materials K1-K3 Sales Doors K4 Accessories K5 Replacement Parts K6-K12 Understanding Replacement Parts K13-K14 Doors and Drawer Fronts - Parts Index K15-K18 Doors and Drawer Fronts - Sizes K19-K21 Accessory Non-Drilled Doors -Sizes K22-K23 Drawer Boxes K24-K26

Framed Cabinet Specifications L1-L8

Merillat Express Specifications Book

Tabl

e of

Con

tent

s

Table of Contents

CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE

Nomenclature Index

1 1FT C6

1ST C5

2 2FT C6

2ST C5

4 4ST C5

A AB5.TH.S.S A1

ACCESSDFAB15 K4

ACCESSDFAVB12 K4

ACM8 J3

ARJVZ B1

ARNON B1

B B12 E1

B1212FH E1

B12FH E1

B15 E1

B1512FH E1

B15FH E1

B18 E1

B1812FH E1

B18FH E1

B21 E1

B2112FH E1

B21FH E1

B24 E1

B2412BFH E2

B2412FH E1

B24B E2

B24BFH E2

B24FH E1

B2712BFH E2

B27B E2

B27BFH E2

B3012BFH E2

B30B E2

B30BFH E2

B33B E2

B33BFH E2

B36B E2

B36BFH E2

B39 E2

B39FH E2

B42 E2

B42FH E2

B45 E2

B45FH E2

B48 E2

B48FH E2

B9FH E1

BBC39/42 BR or BL E12




BCFS36 E14

BCR33 E14

BCR36 E14

BD12-3D E3

BD12-4D E4

BD15-3D E3

BD15-4D E4

BD18-3D E3

BD18-4D E4

BD21-3D E3

BD21-4D E4

BD24-3D E3

BD24-4D E4

BD27-3D E3

BD30-3D E3

BD33-3D E3

BD36-3D E3

BEP E17

BEP-6 E17

BEPF3-34 E17

BEPF3-34-2 E17

BEPF6-34 E17

BF3 E16

BF6 E16

BFC3 E16

BK1530 D8

BK1536 D8

BK1542 D8

BK1830 D8

BK1836 D8

BK1842 D8

BK2130 D8

BK2136 D8

BK2142 D8

BK2430 D8

BK2436 D8

BK2442 D8

BLS36 E13

BTK12 I3

BTK15 I3

BTK18 I3

BTK18DF I3

BTK21 I3

BTK21DF I3

BTK24 I3

BTK24DF I3

BTK27B I3

BTK27BDF I3

BTK30B I3

BTK30BDF I3

BTK33B I3

BTK36B I3

BTK39 I3

BTK45 I3

BWBFMK E15

BWBFMK-2 E15

BWBT15 E4

BWBT18 E4

BWBTK15 E15

BWBTK18-2 E15

C CCK K1

CCM-SW10 J3

CCM8 J3

CCPC K1

CDC K1

CDI18 E16

CFO C6

CGPB36 I1

CHDSA B1

CHDSZ B1

CHNON B1

CHTNA B1

CHTNZ B1

CM-SW10 J3

CM8 J3

CTC8 J3

CTD8 J2

CTNON B1

CTSB J1

CTTNA B1

CTTNZ B1

D DEP2431 H2

DKD30 H1

DKD3018 H1

DKD36 H1

DKD3618 H1

F FDS C5

FS K1

G GDEFESMBB24KIT K7

GDEFESMBBIL24 K7

GDEFESMBBIR24 K7

GDEFESMBBO24 K7

GDESM18KIT K6

GDESM21KIT K6

GDESM24KIT K6

GDESMIL18 K6

GDESMIL21 K6

GDESMIL24 K6

GDESMIR18 K6

GDESMIR21 K6

GDESMIR24 K6

GDESMOL18 K6

GDESMOL21 K6

GDESMOL24 K6

GDESMOR18 K6

GDESMOR21 K6

GDESMOR24 K6

GDESMPB24KIT K6

GDEUMFESA18KIT K7

GDEUMFESA21KIT K7

GDEUMFESA24KIT K7

GDEUMFESAL18 K8

GDEUMFESAL21 K8

GDEUMFESAL24 K8

GDEUMFESAPB24KIT K7

GDEUMFESAR18 K8

GDEUMFESAR21 K8

GDEUMFESAR24 K8

H HDS C5

HIN170FRM-1CT K9

HINBIFOLD-1CT K9

HINFM-1PR K10

HINFOL4WY-1PR K10

HINFOL6WY-1PR K10

HINMCPK K11

HINTOL2WY-1PR K10

HINTOL6WY-1PR K10

HINTOST-1PR K11

HK02 J8

HK02-100 J8

HK107 J8

HK107-100 J8

HK108 J8

HK108-100 J8

HK109 J8

HK109-100 J8

HK110 J8

HK110-100 J8

HK111 J8

HK111-100 J8

HK117 J8

HK117-100 J8

HK119 J8

HK119-100 J8

HK120 J8

HK120-100 J8

HK123 J8

HK123-100 J8

HK125 J8

HK125-100 J8

HK126 J8

HK126-100 J8

HK127 J8

HK127-100 J8

HK128 J8

HK128-100 J8

HK137 J8

HK137-100 J8

HK138 J9

HK138-100 J9

HK150 J9

HK150-100 J9

HK152 J9

HK152-100 J9

HK155 J9

HK155-100 J9

HK157 J9

HK157-100 J9

HK158 J9

HK158-100 J9

HK161 J9

HK161-100 J9

HK162 J9

HK162-100 J9

HP103 J10

HP103-100 J10

HP106 J10

HP106-100 J10

HP112 J10

HP112-100 J10

HP118 J10

HP118-100 J10

HP124 J10

HP124-100 J10

HP131 J10

HP131-100 J10

HP135 J10

HP135-100 J10

HP139 J10

HP139-100 J10

HP140 J10

HP140-100 J10

HP151 J10

Nom

enclature Index

Spec book i

CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN

omen

clat

ure

Inde

x

Nomenclature Index

HP151-100 J10

HP153 J10

HP153-100 J10

HP154 J10

HP154-100 J10

HP156 J10

HP156-100 J10

HP159 J10

HP159-100 J10

HP160 J10

HP160-100 J10

HP163 J11

HP163-100 J11

HP164 J11

HP164-100 J11

HP165 J11

HP165-100 J11

HP166 J11

HP166-100 J11

HTK-U K5

I ICM8 J2

ILR8 J4

K KONON B1

L LKDVUMFESAGDEL K8

LKDVUMFESAGDER K8

LS1 D10

LS3 D10

LSTR8 J6

M MBEP2434 E17

MC1627 G6

MR5.HW.S.S A1

MTEP1284 F6

MTEP1290 F6

MTEP1296 F6

MTEP2184 F6

MTEP2190 F6

MTEP2196 F6

MTEP2484 F6

MTEP2490 F6

MTEP2496 F6

MVEP2131 G7

MVEP2135 G7

MWEP1230 D12

MWEP1236 D12

MWEP1242 D12

N NBM8 J4

O OCS3084B F3

OCS3090B F3

OCS3096B F3

OCS3384B F3

OCS3390B F3

OCS3396B F3

OCSP30 F4

OCSP33 F4

OCU3084B F3

OCU3090B F3

OCU3096B F3

OCU3384B F3

OCU3390B F3

OCU3396B F3

ODK30 F4

ODK33 F4

OSC8 J2

P PB18 E3

PB21 E3

PB24 E3

PB24B E3

PB27B E3

PB30B E3

PB36B E3

PB4896 I1

PB4896-2 I1

PB4896P I1

PB4896P-2 I1

PB9648 I1

PB9648-2 I1

PBBC24/27 E12

PBBC24/27B E13

PCNON B1

PR5.MP.S.S A1

PW1830 D2

PW2130 D2

PW2430 D2

PW2430B D3

PW3018B D3

PW3024B D3

PW3030B D3

PW3618B D3

PW3624B D3

PW3630B D3

PWA2430 D6

Q QCST K2

QGL K2

QP K2

QR8 J5

QST K2

R RA5.MP.S.S A2

RMBFESMBBGDE K9

RMBSMGDE K8

RMBSMGDEPB K8

RMBSMGDEPB-2 K8

RMBUMFESAGDE-2 K8

RMBUMFESAGDEDKDSET K9

RMBUMFESAGDEPB-2 K9

ROT1221 I4

ROT1224 I4

ROT1518 I4

ROT1521 I4

ROT1524 I4

ROT1818 I4

ROT1821 I4

ROT1824 I4

ROT2121 I4

ROT2124 I4

ROT2418B I4

ROT2421B I4

ROT2424B I4

ROT2724B I4

ROT3018B I4

ROT3021B I4

ROT3024B I4

ROT3324B I4

ROT3621B I4

ROT3624B I4

ROT3924 I4

ROT4524 I4

S SADO K5

SB12 E6

SB15 E6

SB18 E6

SB21 E6

SB24 E6

SB24B E7

SB24BFH E8

SB24BUT E7

SB24FH E6

SB24UT E6

SB2727B E7

SB2727BUT E7

SB27B E7

SB27BFH E8

SB27BUT E7

SB3027B E7

SB3027BUT E7

SB30B E7

SB30B-CG E5

SB30BFH E8

SB30BUT E7

SB30BUT-CG E5

SB3327B E7

SB3327BUT E7

SB33B E7

SB33B-CG E5

SB33BUT E7

SB33BUT-CG E5

SB3627B E7

SB3627BUT E7

SB36B E7

SB36B-CG E5

SB36BFH E8

SB36BUT E7

SB36BUT-CG E5

SB39 E7

SB39UT E7

SB42 E7

SB4227 E7

SB4227UT E7

SB42UT E7

SB48 E7

SB48UT E7

SBA36 E9

SBEBA B1

SBEBZ B1

SBNON B1

SBT8 J6

SCM8 J4

SDEBA B1

SDNON B1

SF24 E8

SF24B E9

SF24BFH E9

SF24FH E8

SF30B E9

SF30BFH E9

SF36B E9

SF36BFH E9

SFB2336 E10

SHCLP34 K11

SHCLPLK34L K11

SHCLPLK34R K11

SHO8 J5

SHSUPBPK K11

SHSUPC K12

SHSUPPK K12

SLDO14.75X11.25 K4

SM8 J5

SN5.MP.S.S A2

SN5.RO.S.S A2

SV5.MP.S.S A2

SV5.RO.S.S A2

SWS8 J6

T TEP84 F5

TEP96 F5

TEPF1-84 F6

TEPF1-96 F6

TF3-84 F5, G7

TF3-90 F5, G7

TF3-96 F5, G7

TFB8 J4

TFJVA B1

TFJVZ B1

TFNON B1

TKCL8 J7

TKCV8 J7

TP K2

TSCP K2

TSCT K2

TUK K2

TVMC2430 G6

TVMC3030 G6

TVMC3630 G6

U U1884 F1

U188424 F2

U1890 F1

U189024 F2

U1896 F1

U189624 F2

U2484 F1

U248424 F2

U2490 F1

U249024 F2

U2496 F1

U249624 F2

U308424B F2

U3084B F1

U309024B F2

U3090B F1

U309624B F2

U3096B F1

Spec bookii

CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGEN

omenclature Index

Nomenclature Index

UCM8 J7

UF1884 F2

UF1890 F2

UF1896 F2

UF2484 F2

UF2490 F2

UF2496 F2

USK1812-3/4 I2

USK1824-3/4 I2

USK2412-3/4 I2

USK2424-3/4 I2

USK3012-3/4 I2

USK3024-3/4 I2

UTK12 E16

UTK22 E16

V V48T J1

V72T J1

V96T J1

VB12 G1

VB1235 G1

VB15 G1

VB1535 G1

VB18 G1

VB1818FH G1

VB1835 G1

VB1835FH G1

VB18FH G1

VB21 G1

VB2118FH G1

VB2135 G1

VB2135FH G1

VB21FH G1

VB2435 G1

VB243518BFH G2

VB243518SFH G1

VB2435B G1

VB2435BFH G2

VB2435SFH G1

VB24SFH G1

VB3018BFH G2

VB303518BFH G2

VB3035BFH G2

VB30BFH G2

VB3618BFH G2

VB363518BFH G2

VB3635BFH G2

VB36BFH G2

VB4218FH G2

VB4235FH G2

VB42FH G2

VB4818FH G2

VB4835FH G2

VB48FH G2

VB6018FH G2

VB60FH G2

VCD24 DR or DL G4

VCD2418 DR or DL G4

VCD2435 DR or DL G4

VCD30 DR or DL G4

VCD3018 DR or DL G4

VCD3035 DR or DL G4

VCD36 DR or DL G4

VCD3618 DR or DL G4

VCD3635 DR or DL G4

VCD42 G4

VCD4218 G4

VCD4235 G4

VCD48 G4

VCD4818 G4

VCD4835 G4

VCD60 G5

VCD6018 G5

VCD6035 G5

VD12-3D G5

VD1218-3D G5

VD1235-3D G5

VD15-3D G5

VD1518-3D G5

VD1535-3D G5

VD18-3D G5

VD1818-3D G5

VD1835-3D G5

VD21-3D G5

VD2118-3D G5

VD2135-3D G5

VD24-3D G5

VD2418-3D G5

VD2435-3D G5

VF3 G7

VLC1884 G5

VLC1890 G5

VLC1896 G5

VLC2484 G5

VLC2490 G5

VLC2496 G5

VLSK1821-3/4 I2

VLSK2421-3/4 I2

VNTCLPPK K12

VSB2435B G2

VSB3035B G2

VSB30B G2

VSB36-2D G3

VSB3635-2D G3

VSB3635B G2

VSB36B G2

VSB42 G2

VSB42-2D G3

VSB4235 G2

VSB4235-2D G3

VSB48-2D G3

VSB4835-2D G3

VSB60-2D G3

VSB60-3D G3

VSB6035-2D G3

VSB6035-4D G3

VTK12 I3

VTK15 I3

VTK18 I3

VTK21 I3

VTK24 I3

VTK30B I3

VTK36B I3

VTKS12 I3

VTKS15 I3

VTKS18 I3

VTKS24 I3

VTKS30B I3

VTKS36B I3

VW1530 G6

VWB2430B G6

W W1230 D1

W1236 D1

W1242 D1

W1530 D1

W1536 D1

W1542 D1

W1824 D1

W1830 D1

W1836 D1

W1842 D1

W2124 D1

W2130 D1

W2136 D1

W2142 D1

W2418 D1

W2424 D1

W2424B D2

W2430 D1

W2430B D2

W2436 D1

W2436B D2

W2442 D1

W2442B D2

W2730B D2

W2736B D2

W2742B D2

W3012B D2

W3015B D2

W3018B D2

W3021B D2

W3024B D2

W3027B D2

W3030B D2

W3036B D2

W3042B D2

W3315B D2

W3318B D2

W3324B D2

W3330B D2

W3336B D2

W3342B D2

W3612B D2

W3615B D2

W3618B D2

W3621B D2

W3624B D2

W3627B D2

W3630B D2

W3636B D2

W3642B D2

W3912 D2

W3918 D2

W3924 D2

W3930 D2

W3936 D2

W3942 D2

W4224 D2

W4230 D2

W4236 D2

W4242 D2

W4530 D2

W4830 D2

W930 D1

W936 D1

W942 D1

WA2430 D6

WA2436 D6

WA2442 D6

WA2730 D6

WA2736 D6

WA2742 D6

WBC30/3330 BR or BL D5





WCA1230 D7

WCA1236 D7

WCA1242 D7

WEP1530 D11

WEP1542 D11

WEP30 D11

WEP42 D11

WF1-30 D11

WF3-30 D11

WF3-30-4 D11

WF3-36 D11

WF3-42 D11

WF3-42-4 D11

WF6-30 D11

WF6-36 D11

WF6-42 D11

WFC3-30 D11

WFC3-42 D11

WHNON B1

WL1530 D8

WL3015 D8

WMS271812 D9

WMS301812 D9

WR3012B D2

WR3018B D2

WR3315B D2

WR3318B D2

WR3612B D2

WR3615B D2

WR3618B D2

WR3624B D2

WR3912 D2

WR3918 D2

WR3924 D2

WMS8 J5

Spec book iii

Nom

encl

atur

e In

dex

Nomenclature IndexSpec bookiv

Spec book

Code System

Q Door Style CodeArbor Falls Express AB5 Marlin Express MR5Portrait Express PR5Ralston Express RA5Seneca Ridge Express SN5Spring Valley Express SV5

P Species CodeHardwood HWMaple MPRed Oak ROThermofoil TH

O Door Shape CodeSquare S

N Stain Finishes CodeAmaretto ARNONKona KONONPecan PCNONSable SBNONSedona SDNONToffee TFNONWhite WHNON

N Stain w/Accent Glaze Finishes CodeSable w/Ebony Accent SBEBASedona w/Ebony Accent SDEBAToffee w/Java Accent TFJVA

N Stain w/Glaze Finishes CodeSable w/Ebony Glaze SBEBZToffee w/Java Glaze TFJVZ

N Painted Finish CodeChiffon CHNONCotton CTNON

N Painted Finish w/Accent Glaze CodeChiffon w/Desert Accent CHDSA Chiffon w/Tuscan Accent CHTNACotton w/Tuscan Accent CTTNA

N Painted Finish w/Glaze CodeChiffon w/Desert Glaze CHDSZChiffon w/Tuscan Glaze CHTNZCotton w/Tuscan Glaze CTTNZ

Q P O N M L K J I H

MR5 . HW . S . KONON . N . NNNN . SST . S . C . B15LHDS Door Species Door Finish Cabinet Drawer Carton Model + Options Style Shape Construction Front Construction

Merillat Express Ordering CodeMerillat builds its order code from global options, model, and model options which together define an orderable item. The order code is created from the door, finish, construction, cartoning, model and model options to complete the order code. The order code can incorporate all possible combinations available in the Merillat Express product line. Each order code must be complete to be recognized as a unique product. By understanding the Merillat code system you can identify any product with any variation or option in one place.

Following is a breakdown of each order code segment and how it combines to make a full order code. Each segment is identified with an identification number. That number will be repeated on this page and every page where the specification of product relates to a segment position of the order code.

Code System

Code System 1

Spec book

M This attribute is being held for future use to indicate special finishing options

N

L This attribute is being held for future use to indicate special construction material options NNNN

K Cabinet Construction

XCabinet ConstructionCodeS

YDrawer BoxCodeS, D

ZThick ShelfCodeT

Options Code Standard Construction, Standard Drawers, Thick Shelves SST Standard Construction, Dovetail Drawers, Thick Shelves SDT

J Drawer Front Code Solid Drawer Front S

I Cartoning Code Cartoned C

H Model + Options

Code System

Model + Option Code Examples Code

Wall Single Door Cabinet 18” Wide x 42” High x 12” Deep Hinged Right W1842RBase Single Door Cabinet 21” Wide Hinged Right with 1 Standard Tray B21R1STBase Butt Double Door Cabinet 30” Wide with Half Depth Shelf B30BHDSBase Single Door Cabinet 39” Wide 4 Standard Trays B394STUtility Cabinet Single Door 18” Wide x 96” High x 24” Deep Hinged Right with Cabinet Front Only U189624RCFOVanity Combination Drawer 24” Wide x 34 1/2” High Drawers Left VCD2435DL

Code

Sys

tem

AModel

W1842

B21

B30B

B39

U188424

VCD2435DL

CHinging Code

Left L

Right R

DTray/Shelf Code

Half Depth Shelf HDS

Full Depth Shelf FDS

1 Standard Tray 1ST

2 Standard Trays 2ST

4 Standard Trays 4ST

1 Standard Full Width Tray 1FT

2 Standard Full Width Trays 2FT

GPartial CodeCabinet

CabinetFrontOnly CFO

2

Spec book

Standard CabinetsWall Cabinet widths are always listed first followed by height. A standard wall cabinet is 12” deep except for Wall Refrigerator Cabinets which have a standard depth of 24”. Thus 36 is the width, 24 is the height and depth is 12”. Depth is only listed as the last two numbers when depth is other than standard. Cabinets with a “B” suffix have BUTT doors without a frame center stile.

Tall cabinets follow the same sequence characteristics as Wall Cabinets; width first followed by height (eg; U 1884). In those instances where the cabinet depth is greater than 12”, the sequence is width and height, followed by depth eg; U 188424).

Base Cabinets are simpler than Wall Cabinets because the height (34 1/2” plus 1 1/2” for the countertop) and the depth (24”) are always the same unless otherwise noted. The only numbers you need to know are the width. Cabinets with a “B” suffix have BUTT doors without a frame center stile.

Vanity Cabinets are similar to Base Cabinets; the numbers are used to represent the width. Vanity Sink Base Cabinets are either 31 1/2” or 34 1/2” high plus 1 1/2” for the countertop. This particular cabinet is 31 1/2” high and comes standard with two drawers and is located at the end of the code.

Cabinets with OptionsTrays are an available option for select Base Cabinets. The option of 2 Standard Trays has been chosen for this cabinet. The code looks the same as it did before with (2ST) placed at the end.

Code System

Understanding Product Codes

Cabinet Height

W3624BCabinet Width

Wall Cabinet

A

Number of Drawers

VSB36-2DCabinet Width

Vanity Cabinet

A

Tray Option

B242STCabinet Width

Base Cabinet

A D

Understand Product Codes

B24Cabinet WidthBase Cabinet

A

Cabinet Height

U188424Cabinet Width

Tall Cabinet

ACabinet Depth

AB3012BFH

Cabinet Width

Base Cabinet Cabinet Depth

3

Spec book4

Code

Sys

tem

Understanding Product Codes

Notes

Door Styles

A1Door Styles

Arbor Falls Express

QPOJ AB5.TH .S .S Thermofoil

• Traditional Overlay door design• White vinyl laminated MDF with raised center panel on door• Doors and drawer fronts have a 90° return with an integrated finger pull• White vinyl laminated MDF slab drawer front• Concealed, self-closing hinge• Decorative hardware is optional• Cabinet face frame is White painted maple

Base Wall

°

Marlin Express

QPOJ MR5.HW.S .S Hardwood

• Traditional Overlay door design• Solid hardwood door frame with 2” stiles and rails• Recessed, flat veneer center panel • Door and drawer front have a horizontal reverse bevels• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional

Base Wall

°°

Portrait Express

QPOJ PR5.MP .S .S Maple

• Full overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Recessed, flat veneer center panel• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required

Base Wall

°

°

Door Styles

Q P O J MR5 HW S S

Spec book

Doo

r Sty

les

A2 Door Styles

Q P O N M L K J I H MR5 . HW . S . NANON . N . NNNN . SST . S . C . B12LHDS

Ralston Express

QPOJ RA5.MP.S .S Maple

• Full overlay door design• Solid wood door frame with 3˝ stiles and rails• Recessed, flat veneer center panel• Doors and drawers have a 90º return with no reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is required

Base Wall

°

Seneca Ridge Express

QPOJ SN5.MP.S .S Maple SN5.RO.S .S Red Oak

• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Wood veneer, raised center panel door• Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional

Base Wall

°

Spring Valley Express

QPOJ SV5.MP.S .S Maple SV5.RO.S .S Red Oak

• Traditional Overlay door design• Solid wood door frame with 2 3/16” stiles and rails• Recessed, flat veneer center panel• Doors with painted finishes will either have a recessed, flat, veneer or Medium

Density Fiberboard (MDF) center panel • Top and bottom edges of doors and drawers have a 15º reverse bevel• Slab drawer front is solid wood• Concealed, self-closing hinge• Decorative hardware is optional

Base Wall

°

Spec book

B1Finishes

Finishes

Stain Finishes- Stain Process Stain is applied and brush-wiped to desired color. Next, sealer is applied to

protect the finish and prevent warping and cracking of the wood. Sealer is then sanded to develop a bonding surface for the topcoating process.

As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability may vary by door style. See Finish Availability Chart.

- Amaretto (ARNON) Rich golden brown Available on select Oak door styles- Kona (KONON) Deep semi-transparent dark brown Available on select Hardwood and Maple door styles- Pecan (PCNON) Warm rich brown with deep brown undertones and black overtones Available on select Hardwood and Red Oak door styles- Sable (SBNON) Rich medium brown Available on select Maple door styles- Sedona (SDNON) Rich traditional cherry finish on maple Available on select Maple door styles- Toffee (TFNON) Warm brown Available on select Maple door styles

Stain w/Accent Glaze FInishes - Stain w/Accent Glaze Process Stain is applied and brush-wiped to desired color. Next, sealer is applied

to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the accent glazing and topcoat process.

Accent glaze is applied by hand to specific door and drawer front profiles depending on door style and then cured.

- Sable w/Ebony Accent (SBEBA) Rich medium brown with charcoal (black) accent glaze Available on select Maple door styles- Sedona w/Ebony Accent (SDEBA) Rich traditional cherry finish with charcoal (black) accent glaze

Available on select Maple door styles- Toffee w/Java Accent (TFJVA) Warm brown with dark brown accent glaze Available on select Maple door styles

Stain w/Glaze Finishes - Stain w/Traditional Glaze Process Stain is applied and brush-wiped to desired color. Next, sealer is applied to

protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the glazing and topcoat process.

Glaze is hand applied by hand face side only to corner hang-ups and profile recesses depending on door style.

As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish. Finish availability varies by door style. See Finish Availability Chart.

- Sable w/ Ebony Glaze (SBEBZ) Rich medium brown with charcoal (black) glaze Available on select Maple door styles- Toffee w/ Java Glaze (TFJVZ) Warm brown with dark brown glaze Available on select Maple door styles

P O M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . B15QMerillat Express® Finishes and Wood Species

Finishes End grain surfaces and softer areas of the wood may accept more stain and often appear darker than other surfaces. Since wood is in a constant state of

expansion and contraction, visible lines are normal at the joints on the cabinet face frames and doors. All wood species show some wood grain. The amount of grain will vary by species and finish. Maple is a closed or fine grain wood that can have mineral streaks and pin holes. When paint is applied to Maple these beauty marks may remain slightly visible.

Painted Finishes - Paint Process Our painted finishes consist of several coats of pigmented semi-opaque

enamel paint that is allowed to saturate the wood developing richness while allowing some of the natural grain to remain visible.


- Chiffon (CHNON) Cream Available on select Maple door styles- Cotton (CTNON) White Available on select Hardwood and Maple door styles

Paint w/Accent Glaze Finishes - Paint w/Accent Glaze Process Several coats of pigmented semi-opaque enamel paint is applied and

allowed to saturate the hardwood developing richness while allowing some of the natural grain to remain visible. Next, sealer is applied to protect the finish and prevent warping and cracking of the hardwood. Sealer is then sanded to develop a bonding surface for the accent glazing and topcoat process.

Accent glaze is hand applied to specific door and drawer front profiles depending on door style and then cured.


- Chiffon with Desert Accent (CHDSA) Cream with brown accent glaze Available on select Maple door styles- Chiffon with Tuscan Accent (CHTNA) Cream with light gray accent glaze Available on select Maple door styles- Cotton with Tuscan Accent (CTTNA) White with light gray accent glaze Available on select Maple door styles

Paint w/Glaze Finish - Paint w/Traditional Glaze Process Several coats of pigmented semi-opaque enamel paint is applied and

allowed to saturate the wood developing richness while allowing some of the natural grain to remain visible. Next, sealer is applied to protect the finish and prevent warping and cracking of the wood. Sealer is then sanded to develop a bonding surface for the glazing and topcoat process.

Glaze is applied, face side only, to corner hang-ups and profile recesses depending on door style.


- Chiffon w/Desert Glaze (CHDSZ) Cream with brown glaze Available on select Maple door styles- Chiffon w/Tuscan Glaze (CHTNZ) Cream with light gray glaze Available on select Maple door styles- Cotton w/Tuscan Glaze (CTTNZ) White with light gray glaze Available on select Maple door styles

Thermofoil Finishes- Thermofoil Heavy gauge vinyl laminate is applied with thermo-pressure to door and

drawer front and edges- White (WHNON) Solid white color with satin finish

Spec book

B2 Finishes

Fini

shes

Am

aret

to

Chiff

on

Chiff

on w

/Des

ert A

ccen

t

Chiff

on w

/Des

ert G

laze

Chiff

on w

/Tus

can

Acc

ent

Chiff

on w

/Tus

can

Gla

ze

Cott

on

Cott

on w

/Tus

can

Acc

ent

Cott

on w

/Tus

can

Gla

ze

Kona

ARNON CHNON CHDSA CHDSZ CHTNA CHTNZ CTNON CTTNA CTTNZ KONON

Arbor Falls ExpressThermofoil AB5 . TH . S . SMarlin Express Hardwood MR5 . HW . S . S ; l

Portrait Express Maple PR5 . MP . S . S ; ; lRalston Express Maple RA5 . MP . S . S ; ; ; ; ; l

Seneca Ridge Express Maple SN5 . MP . S . S ; ; ; ; ; lSeneca Ridge Express Red Oak SN5 . RO . S . S l

Spring Valley Express Maple SV5 . MP . S . S ; ; ; ; ; lSpring Valley Express Red Oak SV5 . RO . S . S l

Finish Availability ChartAmaretto – Kona

l Available as standard

; Available at a premium upcharge

Q P O M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . B15

Peca

n

Sabl

e

Sabl

e w

/Ebo

ny A

ccen

t

Sabl

e w

/Ebo

ny G

laze

Sedo

na

Sedo

na w

/Ebo

ny A

ccen

t

Toffe

e

Toffe

e w

/Jav

a A

ccen

t

Toffe

e w

/ Jav

a G

laze

Whi

te

PCNON SBNON SBEBA SBEBZ SDNON SDEBA TFNON TFJVZ TFJVZ WHNON

Arbor Falls ExpressThermofoil AB5 . TH . S . S l

Marlin Express Hardwood MR5 . HW . S . S l

Portrait Express Maple PR5 . MP . S . S l l lRalston Express Maple RA5 . MP . S . S l ; l l ;

Seneca Ridge Express Maple SN5 . MP . S . S l ; l ; l ;Seneca Ridge Express Red Oak SN5 . RO . S . S l

Spring Valley Express Maple SV5 . MP . S . S l ; l ; l ;Spring Valley Express Red Oak SV5 . RO . S . S l

Finish Availability ChartPecan – White

Spec book

Wood Species Hardwood is considered highly durable, making it well suited for furniture and cabinetry. Hardwood is a general term used to classify several types of trees that

wood comes from; it can refer to a number of species (e.g. Birch, Maple and Red Oak). Maple is a popular choice featuring a fine uniform grain that takes a color quite well. Maple is versatile and available in nearly every color combination. A very

consistent wood type. Red Oak is heavy, hard wood, and has a medium-fine, noticeable grain. It gives you dramatic lines that play quite differently off of each color. Thermofoil is a solid colored vinyl that is applied to smooth, engineered wood or Medium Density Fiberboard (MDF). Easy to clean and built to last, Thermofoil

cabinetry gives you uniform appearance.

Spec book

Cabinet Specifications and Options

C1Cabinet Specifications

Cabinet Specifications

Construction Options and Modifications

Full Overlay - Concealed Hinges

• Full Overlay doors leave 3/16˝ of the cabinet’s face frame exposed on either side of the doors and 3/8” exposed between doors

• Butt door cabinets have 1/8” reveal between doors• Nickel-finished, self-closing hinges, 6-way adjustable to

allow for perfect alignment• The reveals shown here may vary slightly on some

cabinets due to actual door/drawer front sizes used⁄" reveal

⅜" reveal

top view

side view

⁄" ⁄"

⅜"

⅜" ⅜"

⅜"

⅜"

Traditional Overlay - Concealed Hinges

• Traditional overlay doors leave 7/8” of the cabinet’s face frame exposed on either side of the doors and 1 3/4” exposed between doors

• Butt door cabinets have 1/8” reveal between doors• Nickel-finished, self-closing hinges, 6-way adjustable to

allow for perfect alignment• The reveals shown here may vary slightly on some

cabinets due to actual door/drawer front sizes used ⅞" reveal

1¾" reveal

⅞"

top view

side view

1"

1"

1"

1"

1"

⅞"

Spec book

Cabi

net S

peci

ficat

ions

and

Opt

ions

C2 Construction Options

Construction Options

Construction Options and Modifications

+ Included as standard ) Available with an upcharge - Available with exceptions (Blank) Not available

Depending on the door style selected, all Merillat Cabinetry cabinet frames shall be constructed of solid hardwood matched to the door and drawer front specifications.

SST Construction - - - - - - - - - - - - K SDT Construction - - - - - - - - - - - - K HDS Half Depth Shelf - - - - - - - - - - D FDS Full Depth Shelf - - - - - - - - - - D 1ST 1 Standard Tray - - - - - - - - - - D 2ST 2 Standard Trays - - - - - - - - - - D 4ST 4 Standard Trays - - - - - - - - - - D 1FT 1 Standard Full-Width Tray - - D 2FT 2 Standard Full-Width Trays - D CFO Cabinet Front Only - - - - - - - - G

K SST

Cabinet Construction

a

b

c

c

e

h

j

l

m

q

ab

d

f

g

k

l

m

n

o

p

q

q

r

i

a. Face Frameb. End Panelsc. Wall and Tall Tops and Bottomsd. Base and Vanity Bottomse. Wall Backsf. Tall, Base and Vanity Backsg. Base Corner Gussetsh. Wall and Tall Hang Raili. Base and Vanity Screw Railj. Wall and Tall Shelvesk. Base Shelvesl. Shelf Supports m. Hingesn. Drawer Guideso. Drawer Corep. Toeboard Backerq. Door and Drawer Bumpersr. Back Plugs

Spec book


C3Construction Options

Q P O N M L K J I H MR5 . RO . S . NANON . N . NNNN . SST . S . C . B15LHDS

Construction Options Chart

Stan

dard

Cons

truc

tion

(SST

)

Stan

dard

Co

nstr

uctio

n w

ithD

ovet

ail D

raw

ers

(SD

T)

Face Frame

Wall, Base and Vanity End Panels

3/8"Engineered

Wood

Tall End Panels1/2”

EngineeredWood

Wall and Tall Tops

and Bottoms

ytinaV dna esaBBottoms

Ext. Finish:unfinishedInt. Finish:

natural woodgrain

Ext. Finish:natural maple

Int. Finish:woodgrainlaminate

Wall Backs


natural wood grain

Base and Vanity Backs

Tall Backs

Base Corner Gussets

15lbs persq. ft

load capacity

3/4”Engineered

Woodw/ Clear

PolycarbonateShelf Supports

Shelves

Hinges Nickel Plated, concealed self-closing

Drawer Guides

3/4 extensionside-mountdrawer slide

system

75 lb load capacity

Full extension,concealed,

undermountslide

system withSoftAction

Drawer Core/ Drawer Bottom

Core: 1/2”Engineered

WoodBottom:

1/4”Engineered

Wood

Drawers 30”and widerhave 3/8”bottoms

Core: 3/4”Solid

HardwoodBottom:

5.2mm 3-plyPlywood

Toeboard Backer 3/8” Engineered WoodToespace - 4 1/2” tall (Universal is 5 1/2” tall ) x 2 25/32” Deep

Roll-Out Trays (ROT) 1/2” Engineered or Solid Wood

3/8"Engineered

Wood

1/2” Engineered

Wood

1/2” Engineered

Wood

Ext. Finish:laminate tomatch doorand frameInt. Finish:woodgrainlaminate

Ext. Finish:laminate tomatch doorand frameInt. Finish:woodgrainlaminate

Ext. Finish:natural maple

Int. Finish:woodgrainlaminate


natural woodgrain

3/8"Engineered

Wood

3/8"Engineered

Wood

1/4"Engineered

Wood

1/4"Engineered

Wood

1/4”Engineered

Wood (3/8” for

PC and U36)

1/4”Engineered

Wood (3/8” for

PC and U36)

3/4”Engineered

Woodw/ Clear

PolycarbonateShelf Supports

Drawers 30”and widerhave 3/8”

solidhardwood

cleat for extrasupport

75 lb load capacity

15lbs persq. ft

load capacity


natural woodgrain

1/2”Engineered

Wood

1/2” Engineered WoodDadoed and glued to cabinet corners

Det

ails

(SST

)

Det

ails

(SD

T)

Solid Hardwood

Spec book

Cabi

net S

peci

ficat

ions

and

Opt

ions



Construction Options Diagram

Laminate tomatch door

Drawer

Solid hardwood face frameSolid hardwood face frame

Wall, Base, VanityTall

⅜˝

¾˝¾˝

Engineered wood

Natural woodgrain laminate

Wall, Base, VanityTall

DovetailDrawer

Natural woodgrain laminate

Solid hardwood face frameSolid hardwood face frame

Engineered wood

3/4” Solid Hardwood

5.2mm Plywood

Laminate to match

door

Laminate to match

door

¾˝¾˝

½˝ ⅜˝

Standard Construction with Dovetail Drawers (SDT)

Standard Construction (SST)

Engineered wood Engineered wood

1/2” Engineered wood (SST)

Laminate tomatch door

½˝

Spec book


Construction Options


Half Depth Shelf

D HDS

• 3/4” thick engineered wood• Standard shelf for most base and

universal cabinets • Cabinets 27” or wider will have full

length support cleat attached to the underside of the shelf along the front edge

SST @K SDT @K + HDS @D FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D CFO @G

Full Depth Shelf

D FDS

• 3/4” thick engineered wood• Available for most Base cabinets• Note: When selected, replace HDS (10d)

with FDS

SST @K SDT @K HDS @D ) FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D CFO @G

1 Standard Tray

D 1ST

• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood

• Available for most Base cabinets• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when

ROT options are selected

SST @K SDT @K HDS @D FDS @D ) 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D CFO @G

2 Standard Trays

D 2ST


• Available for most Base cabinets• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when


SST @K SDT @K HDS @D FDS @D 1ST @D ) 2ST @D 4ST @D 1FT @D 2FT @D CFO @G

4 Standard Trays

D 4ST


• Available for most 2 door Base cabinets• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when


SST @K SDT @K HDS @D FDS @D 1ST @D 2ST @D ) 4ST @D 1FT @D 2FT @D CFO @G

C5

Spec book

Cabi

net S

peci

ficat

ions

and

Opt

ions



1 Standard Full-Width Tray

D 1FT

• Standard tray spans the full-width of cabinet


• Available for most Base Butt Door cabinets

• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when


SST @K SDT @K HDS @D FDS @D 1ST @D 2ST @D 4ST @D ) 1FT @D 2FT @D CFO @G

2 Standard Full-Width Trays

D 2FT

• Standard tray spans the full-width of cabinet


• Available for most Base Butt Door cabinets

• Natural woodgrain laminate• 3/4 extension side mount glide• 75 lb. capacity • Shelves are omitted from cabinets when


SST @K SDT @K HDS @D FDS @D 1ST @D 2ST @D 4ST @D 1FT @D ) 2FT @D CFO @G

Cabinet Front Only

G CFO

• Front frame and appropriate doors and drawer fronts only

SST @K SDT @K HDS @D FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D ) CFO @G

Spec book

Wall Cabinets

D1Wall Cabinets

Wall CabinetsConstruction Options and Modifications


Note: Standard wall cabinet box depth is 12˝ unless stated otherwise. Add door thickness with bumpers for total depth.

Caution: Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below. Failure to provide additional support could result in collapse of the cabinet, serious personal injury, or property damage. Damage relating to failure to provide additional support is not covered by the limited warranty. See inside cover for warranty details

Any wall cabinet over 24” wide or 30” high with a depth greater than 12” and/or butt doors must be installed between two cabinets, a cabinet and a wall, or supported from below. Material dimensions may vary slightly based on lumber industry standards.

Specifications subject to change without notice.

SST Construction - - - - - - - - - - - - K SDT Construction - - - - - - - - - - - - K CFO Cabinet Front Only - - - - - - - - G

A C G W1830 L CFO

Wall Single Door

A C Specify R or L

18” High W2418 R or L 23 1/2” High W1824 R or L W2124 R or L W2424 R or L 30” High W930 R or L W1230 R or L W1530 R or L W1830 R or L W2130 R or L W2430 R or L 36” High W936 R or L W1236 R or L W1536 R or L W1836 R or L W2136 R or L W2436 R or L 42” High W942 R or L W1242 R or L W1542 R or L W1842 R or L W2142 R or L W2442 R or L

• 18” high cabinets have no shelves• 23 1/2” cabinets have one adjustable

shelf• 30” high cabinets have two adjustable

shelves• 36” - 42” high cabinets have three

adjustable shelves• Actual height of 24” cabinet is 23 1/2”

+ SST @K + SDT @K ) CFO @G

18˝

12˝

W2418

12˝

23 ½˝ W1824 - W2424

30˝

12˝

W930 - W2430

36˝42˝

12˝

W936 - W2442

Spec book

Wal

l Cab

inet

s

D2 Wall Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . W1830LCFO

Wall Double Door

A 12” High W3012B W3612B W3912 15” High W3015B W3315B W3615B 18” High W3018B W3318B W3618B W3918 20 1/2” High W3021B W3621B 23 1/2” High W2424B W3024B W3324B W3624B W3924 W4224 27” High W3027B W3627B

A 30” High W2430B W2730B W3030B W3330B W3630B W3930 W4230 W4530 W4830 36” High W2436B W2736B W3036B W3336B W3636B W3936 W4236 42” High W2442B W2742B W3042B W3342B W3642B W3942 W4242

• 12” - 20 1/2” high cabinets have no shelves

• 23 1/2” and 27” high cabinets have one adjustable shelf

• 30” high cabinets have two adjustable shelves

• 36” - 42” high cabinets have three adjustable shelves• Cabinets with a “B” suffix have BUTT doors without a

center frame stile• Actual height of 21” cabinet is 20 1/2” • Actual height of 24” cabinet is 23 1/2”


12˝

12˝15˝18˝

20 ½˝

W3012B - W3621B

12˝

23 ½˝27˝

W2424B - W3627B

30˝

12˝W2430B -

W4830

36˝42˝

12˝ W2436B - W4242

Wall Refrigerator

A 12” High WR3012B WR3612B WR3912 15” High WR3315B WR3615B

A 18” High WR3018B WR3318B WR3618B WR3918 23 1/2” High WR3624B WR3924

• Designed for use over refrigerators where there is adequate clearance

• No shelves• Cabinets with a “B” suffix have BUTT

doors without a center frame stile• Actual height of 24” cabinet is 23 1/2”

? Caution: Additional support is required. See installation sheet provided with cabinet or the Merillat Framed Cabinet Installation Guide


24˝

12˝15˝18˝

23 ½˝

Peninsula Wall Single Door

A 30” High PW1830 PW2130 PW2430

• Two adjustable shelves• Reversible for left or right hinging• Each side has one door hinged at the

same end of cabinet

? Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See Cabinet installation guide for

specific instructions

+ SST @K + SDT @K CFO @G

30˝

12/˝(excluding doors)

Spec book

Wall Cabinets

D3Wall Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . W1830LCFO

Peninsula Wall Double Door

A 18” High PW3018B PW3618B 23 1/2” High PW3024B PW3624B 30” High PW2430B PW3030B PW3630B

• 18” high cabinets have no shelves• 23 1/2” cabinets have one adjustable

shelf• 30” high cabinets have two adjustable

shelves • BUTT doors without a frame center stile• Each side has two doors • Actual height of 24” cabinet is 23 1/2”



+ SST @K + SDT @K CFO @G18˝


PW3018B - PW3618B

23 ½˝


PW3024B - PW3624B

30˝


PW2430B - PW3630B

Spec book

Wal

l Cab

inet

s

D4 Wall Corner Cabinets

Wall Corner CabinetsConstruction Options and Modifications



A WBC30/3330BR

Wall Blind Corner Cabinet Information

• Wall blind corner cabinets provide access to corner space and permits adjustability of up to 2 7/8” maximum to aid in kitchen cabinet layout. Consult chart for “pull” dimensions and minimum wall space requirements.

• “Pulling” the cabinet away from the corner (2 7/8” maximum), and using the supplied filler and panel provides clearance for opening doors when decorative hardware is used.

• BR or BL indicates blind end of cabinet. Please specify.• Door hinged on same side as blind.• Cabinets may be changed from right to left by inverting

cabinet. • Note: A 3” Wall Filler and Blind Panel is included with

each WBC cabinet ordered, shipped unattached.

Wall Blind

Corner

(C)Frame

Opening

Partial Overlay

(B) Cabinet

Width

30"

36"

48"

30"

36"

NoPull

MaxPull

32 /"

38 /"

50 /"

NoPull

MaxPull

(A)Wall Space

(D) Door Hardware Clearance

(C)Frame

Opening

Full Overlay

(B) Cabinet

Width

30"

36"

NoPull

MaxPull

NoPull

MaxPull

(A)Wall Space


/"

/"

/"

3 /"

3 /"

3 /"

13 ½"

19 ½",

13 ½", 15"

WBC30/33

WBC36/39

WBC48/51

1 /"

1 /"

1 /"

4 ½"

4 ½"

4 ½" 48" 48"

32 /"

38 /"

50 /"

30"

36"

48"

13 ½"

19 ½",

13 ½", 15"

Wall Blind Corner

AB

D

C

WBC Cabinet (Blind Right)

Filler and Panel

AdjoiningCabinet

Frame Opening

0˝ to

2 /˝

Blind Right (BR) shown

Spec book

Wall Cabinets

D5Wall Corner Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . WBC30/3330BR

Wall Blind Corner Single Door

A Specify BR or BL

30” High WBC30/3330 BR or BL WBC36/3930 BR or BL 36” High WBC30/3336 BR or BL 42” High WBC30/3342 BR or BL


• 36” - 42” high cabinets have three adjustable shelves

• Door hinged to frame center stile• Do not pull cabinet more than 2 7/8”

from corner• Blind Panel with 3” filler included, shipped unattached


30˝

12˝ WBC30/3330 - WBC36/3930

36˝42˝

12˝WBC30/3336 - WBC30/3342


Wall Blind Corner Double Door

A Specify BR or BL WBC48/5130 BR or BL

• Two adjustable shelves• Two different width doors; the narrower

is located next to the blind panel• Do not pull cabinet more than 2 7/8”

from corner• Blind Panel with 3” filler included,

shipped unattached


30˝

12˝


Spec book

30˝

WA2430-WA2730

36˝42˝

WA2436 - WA2742

17"

24"

24"

12"

12"

WA24_ _

17"

27"

27"

15"

15"

WA27_ _

Left Hand shown

17˝

12˝

24˝

24 /˝

Kitchen Side

Dining Room Side

12 /˝

WallCabinet

Left -HandPeninsula

Wall AngleCabinet

PeninsulaWall

Cabinet

17˝

12˝

Right Hand shown

24˝

24 /˝

Kitchen Side

Dining Room Side

12 /˝

WallCabinet

Right -HandPeninsula

Wall AngleCabinet

PeninsulaWall

Cabinet

30˝

Left Hand shown

Wal

l Cab

inet

s

D6 Wall Corner Cabinets


Wall Angle Single Door

A C Specify R or L

30” High WA2430 R or L WA2730 R or L 36” High WA2436 R or L WA2736 R or L 42” High WA2442 R or L WA2742 R or L



• Back corner removed for easy installation

• Full and Traditional overlay door widths are similar to avoid interference with adjacent cabinet doors

• Adjacent cabinets can be installed directly without fillers


Peninsula Wall Angle

A C Specify R or L PWA2430 R or L

• Two adjustable shelves• R or L designates dining room side door

hinging• Stile on dining room frame is extra wide

to clear window or door molding• Full and Traditional overlay door widths

are similar to avoid interference with adjacent cabinet doors

• Adjacent cabinets can be installed directly without fillers• Requires 24 1/16” of wall space excluding dining room

side cabinet door




Spec book

30˝

12˝ 12˝

36˝42˝

12˝ 12˝

Plan View of Adjustable Shelf

13 /˝ (Front)

9 /˝9 /˝12˝

12˝ 45°

WCA1230 WCA1236 - WCA1242

Wall Cabinets

D7Wall Corner Cabinets


Wall Corner Angle

A C Specify R or L

30” High WCA1230 R or L 36” High WCA1236 R or L 42” High WCA1242 R or L

• For use at end of cabinet run or in a corner



- SDT orderable: shipped as SST

+ SST @K - SDT @K ) CFO @G

Spec book

Wal

l Cab

inet

s

D8 Wall Open Cabinets

Wall Open CabinetsConstruction Options and Modifications


Caution: Bookcases are typically subjected to extreme weight. Additional support is required. Wall hung applications must be limited to 15 lbs. per square foot of shelf area; not to exceed 50 lbs. per shelf.


SST Construction - - - - - - - - - - - - K SDT Construction - - - - - - - - - - - - K

A BK1530

Bookcase Cabinets

A 30” High BK1530 BK1830 BK2130 BK2430 36” High BK1536 BK1836 BK2136 BK2436 42” High BK1542 BK1842 BK2142 BK2442

• 30” high bookcases have two adjustable shelves

• 36” and 42” high bookcases have three adjustable shelves

• Matching laminate interior• Maple Accent Glaze shipped standard finish• Vertical wood grain back panel; except Chiffon, Cotton

and White • Includes low profile clear polycarbonate shelf supports in

addition to hold -down style supports used for shipping

+ SST @K + SDT @K

BK1530 - BK2430

BK1536 - BK2442

30˝

12˝

36˝42˝

12˝

Wall Lattice

A 15” High WL3015 11 Bottles 30” High WL1530 11 Bottles

• Matching laminate interior• Vertical wood grain back panel; except

Chiffon, Cotton and White • Lattice finished to match• Chiffon, Cotton and White lattice are painted Maple• Lattice is not removable• 4” x 4” bottle openings

+ SST @K + SDT @K12˝ 30˝

15˝

WL3015 (horizontal)

30˝

12˝ 15˝

WL1530 (vertical)

Spec book

Wall Cabinets

D9Wall Appliance Cabinets

Wall Appliance CabinetsConstruction Options and Modifications


SST Construction - - - - - - - - - - - - K SDT Construction - - - - - - - - - - - - K

A WMS271812

Wall Microwave Shelf

A WMS271812 WMS301812

• 3/4” thick shelf extends 3 25/32” beyond face frame of cabinet

• Shelf shipped unattached for easier installation; mounting hardware included

• Matching laminate interior• Vertical wood grain back panel; except

Chiffon, Cotton and White • Designed for countertop style microwaves• Available in all finishes; Maple Accent Glaze shipped

standard finish• Chiffon and Cotton glaze shipped standard finish • Note: Must be installed between two cabinets or between

cabinet and side wall

+ SST @K + SDT @K

12˝

18˝

Opening SizesCabinet

WMS271812

WMS301812

24˝ wide x14 ¼˝ high x 15˝ deep (shelf)

27˝ wide x14 ¼˝ high x 15˝ deep (shelf)

Spec book

Wal

l Cab

inet

s

D10 Wall Accessories

Wall AccessoriesConstruction Options and Modifications


HW Hardwood - - - - - - - - - - - - - - P MP Maple - - - - - - - - - - - - - - - - - P RO Red Oak - - - - - - - - - - - - - - - - P TH Thermofoil - - - - - - - - - - - - - - P

A MWEP1230

Lazy Susan Revolving Shelf Kit (One Shelf)

A LS1

• One 18” diameter wide impact white plastic shelf

• Distance from top of shelf rim to top of cabinet surface is 2 7/8”

• Attaches to cabinet shelf or bottom, 1 1/2” clearance gap between bottom of shelf and cabinet shelf or bottom

• Installation instructions and mounting hardware included

• Fits 30”, 36” and 42” high Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets

• One per carton

HW @P MP @P RO @P TH @P

18˝

2 /˝

Top of cabinet f loor

Shelf rim

Lazy Susan Revolving Shelf Kit (Three Shelves)

A LS3

• Three 18” diameter wide impact white plastic shelves that rotate together

• Fits 24” wide Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets

• Replaces adjustable shelves shipped with cabinet

• Includes center post and installation hardware

• Adjust 22” to 33” in height• One set of three shelves per carton


18˝

Spec book

Wall Cabinets

D11Wall Accessories

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . MWEP1230

Wall Filler

A 1” Wide WF1-30 3” Wide WF3-30 WF3-30-4 WF3-36 WF3-42 WF3-42-4 6” Wide WF6-30 WF6-36 WF6-42

• 3/4” thick solid wood• Backside of filler not finished• Available in all finishes; Maple Accent

Glaze shipped standard finish• Chiffon, Cotton and White are painted

Maple • Offered individually; select models

offered in quantities of 4

+ HW @P + MP @P + RO @P + TH @P

1" 3" 6"

30"36"42"

30"

Wall Filler Corner

A WFC3-30 WFC3-42

• 3” on each face• 3/4” thick solid wood• Available in all finishes; Maple Accent


maple and shipped standard finish• Backside of filler not finished• One per carton

+ HW @P + MP @P + RO @P + TH @P30˝

42˝

3˝

3˝

¾˝

Wall End Panel

A 11 1/4” Wide WEP30 WEP42 14 1/4” Wide WEP1530 WEP1542

• Used to trim or flush out laminate exposed end of wall cabinet

• For right or left hand use• 3/16” thick veneered plywood panel,

except White, finished on one side; grain runs lengthwise

• 3/16” thick laminate panel for White; finished on one side only

• Finished one side only• 42” panels trimmable for 36“ wall cabinets• Available in all finishes; Maple Accent Glaze shipped

standard finish• Chiffon and Cotton are painted Maple• One per carton

+ HW @P + MP @P + RO @P + TH @P

Grain Direction

30˝42˝

11 ¼˝14 ¼˝

Spec book

Wal

l Cab

inet

s

D12 Wall Accessories

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . MWEP1230

Matching Wall End Panel

A 11 1/4” wide MWEP1230 MWEP1236 MWEP1242

• Provides a finished furniture look to 12” deep wall cabinet ends

• For right or left hand use• 3/16” thick white laminate panel for

Arbor Falls Express• 3/16” thick veneered plywood panel,

except Arbor Falls Express• Available in all door styles and finishes• Full overlay door styles shipped attached to panel. When

installed, door overlaps cabinet frame edge to provide matching reveals

• Traditional overlay door styles; door shipped attached to panel

• Panel trimmed to fit installation• One per carton

+ HW @P + MP @P + RO @P + TH @P

Grain Direction

30˝36˝42˝

Item

MWEP1230

MWEP1236

MWEP1242

11 ¼˝

11 ¼˝

11 ¼˝

Width

30˝

36˝

42˝

Length

29 ¼˝

35 ¼˝

41 ¼˝

Length

11 /˝

11 /˝

11 /˝

Width

28˝

34˝

40˝

Length

10 ¼˝

10 ¼˝

10 ¼˝

Width

Panel Size

Full Overlay Door

Traditional Overlay Door

Spec book

Base Cabinets

E1Base Cabinets

Base CabinetsConstruction Options and Modifications


SST Construction - - - - - - - - - - - - K SDT Construction - - - - - - - - - - - - K HDS Half Depth Shelf - - - - - - - - - - D FDS Full Depth Shelf - - - - - - - - - - D 1ST 1 Standard Tray - - - - - - - - - - D 2ST 2 Standard Trays - - - - - - - - - - D 4ST 4 Standard Trays - - - - - - - - - - D 1FT 1 Standard Full -Width Tray - - D 2FT 2 Standard Full -Width Trays - D CFO Cabinet Front Only - - - - - - - - G

A C D B12 L HDS

Base Single Door

A C D Specify R or L B12 R or L HDS B15 R or L HDS B18 R or L HDS B21 R or L HDS B24 R or L HDS

• Standard height top drawer• Back panel is pre -drilled for optional

roll -out trays• Note: For tray or shelf options for select

cabinets, replace HDS (10d) with the option code of your choice

+ SST @K ) SDT @K + HDS @D ) FDS @D ) 1ST @D ) 2ST @D 4ST @D 1FT @D 2FT @D ) CFO @G

34 ½˝

24˝

HDS option shown

Base Single Door Full-Height

A C D 12” Deep

Specify R or L( B1212FH R or L( B1512FH R or L( B1812FH R or L( B2112FH R or L( B2412FH R or L 24” Deep Specify R or L( B9FH R or L B12FH R or L HDS B15FH R or L HDS B18FH R or L HDS B21FH R or L HDS B24FH R or L HDS

• B9FH has no shelf• Two Full -height doors• Back panel is pre -drilled for optional



+ SST @K + SDT @K ) HDS @D - FDS @D - 1ST @D - 2ST @D 4ST @D 1FT @D 2FT @D ) CFO @G

34 ½˝

12˝

34 ½˝

24˝

HDS option shown

B12FH-B24FH

B1212FH-B2412FH

( Not available with tray or shelf options

Spec book

Base

Cab

inet

s

E2 Base Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . B12LHDS

Base Double Door

A D One Drawer B24B HDS B27B HDS B30B HDS B33B HDS B36B HDS B39 HDS Two Drawers B42 HDS B45 HDS B48 HDS

• Standard height top drawers• B24B -B39 have one standard drawer• B42 -B48 have two standard drawers• Back panel is pre -drilled for optional

roll -out trays• Cabinets with a “B” suffix have BUTT

doors without a center frame stile• Note: For tray or shelf options for select


+ SST @K ) SDT @K + HDS @D ) FDS @D 1ST @D ) 2ST @D ) 4ST @D ) 1FT @D ) 2FT @D ) CFO @G

HDS option shown

34 ½˝

24˝B42 - B48

34 ½˝

24˝

Non-Butt, HDS option shown

B24B - B39

Base Double Door Full-Height

A D 12” Deep( B2412BFH( B2712BFH( B3012BFH 24” Deep B24BFH HDS B27BFH HDS B30BFH HDS B33BFH HDS B36BFH HDS B39FH HDS B42FH HDS B45FH HDS B48FH HDS

• Back panel is pre -drilled for optional roll -out trays

• Two Full -height doors • Cabinets with a “B” suffix have BUTT

doors without a center frame stile• Note: For tray or shelf options for select


+ SST @K + SDT @K + HDS @D - FDS @D 1ST @D - 2ST @D - 4ST @D - 1FT @D - 2FT @D ) CFO @G

34 ½˝

24˝

Non-butt, HDS option shown

B39FH HDS-B48FH HDS

34 ½˝

12˝

B2412BFH-B3012BFH

( Not available with tray or shelf options

Spec book

Base Cabinets

E3Base Cabinets


Peninsula Base Single Door

A D PB18 FDS PB21 FDS PB24 FDS

• One standard height full-width drawer opens on kitchen side

• Peninsula side has one full-width false drawer front above door

• Each side has one door hinged at the same end of cabinet

• Door hinged left on kitchen side• Note: Full depth shelf (FDS) option or

a tray option must be selected for this cabinet

• Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty

+ SST @K ) SDT @K HDS @D ) FDS @D ) 1ST @D ) 2ST @D 4ST @D 1FT @D 2FT @D CFO @G

34 ½˝

24 /˝(excluding door

and drawer)

Kitchen side

Peninsula side

FDS option shown

Kitchen side

Peninsula side

Peninsula Base Butt Door

A D PB24B FDS PB27B FDS PB30B FDS PB36B FDS

• One standard height full-width drawer opens on kitchen side

• Peninsula side has one full-width false drawer front above doors

• BUTT doors without a center stile• Each side has two doors • Note: Full depth shelf (FDS) option or

a tray option must be selected for this cabinet

• Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty

+ SST @K ) SDT @K HDS @D ) FDS @D 1ST @D 2ST @D 4ST @D ) 1FT @D ) 2FT @D CFO @G

34 ½˝

Kitchen side

Peninsula side

24 /˝(excluding doors

and drawer)

Base Three Drawer

A 3/4 Extension Drawer BD12-3D BD15-3D BD18-3D BD21-3D BD24-3D BD27-3D Full Extension Drawer BD30-3D BD33-3D BD36-3D

• One standard height drawer on top• Two deep drawers on bottom• 3/4 extension slides on all drawers when

SST construction is chosen• Top drawers will be 3/4 extension slides

when SST is chosen; bottom drawers will be full extension when SDT is chosen

+ SST @K ) SDT @K HDS @D FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D ) CFO @G

24˝

34 ½˝

Spec book

Base

Cab

inet

s

E4 Base Cabinets


Base Four Drawer

A BD12-4D BD15-4D BD18-4D BD21-4D BD24-4D

• Three standard height drawers• One deep drawer on bottom• 3/4 extension slides on all drawers when

SST construction is chosen

+ SST @K ) SDT @K HDS @D FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D ) CFO @G

24˝

34 ½˝

Base Wastebasket Top Mount

A BWBT15 BWBT18

• One standard height full -width drawer• Door is attached to wastebasket

assembly and is pulled open to access basket(s)

• Top mounted wastebasket assembly rolls out on full -extension ball -bearing slides

• BWBT15 has one 35 qt. white plastic basket and one 5 1/2” deep white plastic tray for garbage bag storage

• BWBT18 has two 35 qt. white plastic baskets (no garbage bag tray storage)

• Hardwood veneer tray supports easily removable basket(s)

• 35 qt. basket size is 10 1/2” x 14 5/8 x 18” tall

+ SST @K ) SDT @K HDS @D FDS @D 1ST @D 2ST @D 4ST @D 1FT @D 2FT @D CFO @G

34 ½˝

24˝

BWBT18 shown

Spec book

Base Cabinets

E5Base Sink Cabinets

Base Sink CabinetsConstruction Options and Modifications



A SFDB4242

CoreGuard® Sink Base

A Without Utility Tray SB30B-CG SB33B-CG SB36B-CG With Utility Tray SB30BUT-CG SB33BUT-CG SB36BUT-CG

• No shelf• One full -width false drawer front above

doors• Light beige color interior• BUTT doors without a center stile• Available for order with all door styles• Decorative end panel required for end of peninsula or

island. Not Included, order separately• Bottom panel slants 1º toward front of cabinet and has

raised ribs to slightly elevate stored items • Easy to clean and durable sink base helps protect the

cabinetry from everyday leaks and spills• For cabinet back panel plumbing installation errors,

CoreGuard® Panel Backer is available. See CGPB36 in Panels section. Order separately

- Regardless of construction option, cabinet is constructed and shipped the same

- Ordereable in all construction options, shipped with back, end and bottom panels made of an engineered polymer material

? Caution: For an island/peninsula installation, the CoreGuard® Sink cabinet must have a minimum of one (1) 15” cabinet or larger

installed adjacent to it in order for the island/peninsula to have adequate structural stability. Accessories cannot be installed on end panels, back or floor of the cabinet

- SST @K - SDT @K CFO @G

34 ½˝

24˝

34 ½˝

24˝ SB30B-CG -SB36B-CG

SB30BUT-CG -SB36BUT-CG

Opening Sizes

Cabinet Top Width Top Depth

SB30B-CG 27 ⁄˝ 22 ⅜ ˝

SB33B-CG 30 ⁄˝ 22 ⅜ ˝

SB36B-GC 33 ⁄˝ 22 ⅜ ˝

SB30BUT-CG 27 ⁄˝ 22 ⅜

SB33BUT-CG 30 ⁄˝ 22 ⅜ ˝

SB36BUT-GC 33 ⁄˝ 22 ⅜

Spec book

Base

Cab

inet

s

E6 Base Sink Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . SB30BUT-CG

Sink Base Single Door

A C Specify R or L

Without Utility Tray SB12 R or L SB15 R or L SB18 R or L SB21 R or L SB24 R or L With Utility Tray SB24UT R or L

• No shelf• One full -width false drawer front• Back panel is pre -drilled for optional

roll -out trays- CFO option is not available with

cabinets with a Utility Tray (UT)

+ SST @K + SDT @K - CFO @G

34 ½˝

24˝

Sink Base Single Door Full-Height

A C Specify R or L SB24FH R or L

• No shelf• BUTT doors without a center stile• Two Full -height doors• Specify right or left hinging• Back panel is pre -drilled for optional

roll -out trays


34 ½˝

24˝

Spec book

Base Cabinets



Sink Base Double Door

A 24” Deep SB24B SB27B SB30B SB33B SB36B SB39 SB42 SB48 27” Deep SB2727B SB3027B SB3327B SB3627B SB4227 24” Deep

With Utility Tray SB24BUT SB27BUT SB30BUT SB33BUT SB36BUT SB39UT SB42UT SB48UT 27” Deep

With Utility Tray SB2727BUT SB3027BUT SB3327BUT SB3627BUT SB4227UT

• No shelf• One full -width false drawer front above

doors except SB42, SB42UT, SB4227, SB4227UT, SB48 and SB48UT which have two drawer fronts

• Cabinets with a “B” suffix have BUTT doors without a center frame stile

• Back panel is pre -drilled for optional roll -out trays• Roll -out tray not avail for 27” deep cabinets- CFO option is not available with cabinets with a Utility

Tray (UT)

+ SST @K + SDT @K - CFO @G

34 ½˝

24˝27˝

SB24B -SB39

SB24BUT - SB39UT

34 ½˝

24˝ 27˝

24˝-39˝

SB42 - SB48

34 ½˝

24˝27˝

SB42UT - SB48UT

34 ½˝

24˝27˝

42˝- 48˝

Spec book

Base

Cab

inet

s



Sink Base Double Door Full-Height

A SB24BFH SB27BFH SB30BFH SB36BFH

• No shelf• BUTT doors without a center stile• Full -height door• Back panel is pre -drilled for optional

roll -out trays


34 ½˝

24˝

Sink Front Single Door

A C Specify R or L SF24 R or L

• Not trimmable• One full -width false drawer front• Toespace (toekick backer assembly)

included, shipped unattached• Bottom panel not supplied, order

separately. See Sink Front Bottom- Regardless of construction option, cabinet is constructed

and shipped the same

- SST @K - SDT @K CFO @G34 ½˝

Sink Front Single Door Full-Height

A SF24FH

• Not trimmable• Invertible for right or left hand use• Toespace (toekick backer) assembly

shipped unassembled to floor• Bottom panel not supplied, order

separately. See Sink Front Bottom- Regardless of construction option, cabinet is constructed



34 ½˝

Spec book

Base Cabinets



Sink Front Double Door

A SF24B SF30B SF36B

• Not trimmable• One full -width false drawer front• Cabinets with a “B” suffix have BUTT

doors without a center frame stile• Toespace (toekick backer assembly)

included, shipped unattached• Bottom panel not supplied, order separately. See Sink

Front Bottom- Regardless of construction option, cabinet is constructed



34 ½˝

Sink Front Double Door Full-Height

A SF24BFH SF30BFH SF36BFH

• Not trimmable• Toespace (toekick backer assembly)

included, shipped unattached• Bottom panel not supplied, order

separately. See Sink Front Bottom- Regardless of construction option,

cabinet is constructed and shipped the same


34 ½˝

Sink Base Angle

A C Specify R or L SBA36 R or L

• One full -width false drawer front above door

• Full overlay sink front door and false drawer front are similar in width to traditional overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame

• Top panel must be cut in field to receive sink• Use Base End Panel Filler (BEPF3 -34) if end is exposed

(requires 3” of space)• 29 1/4” minimum doorway clearance required for

delivery with cabinet door removed• Adjacent cabinets can be installed directly without fillers

? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening. Options available:

A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension

+ SST @K - SDT @K ) CFO @G

17˝, 25 ½˝24˝ 24˝

34 ½˝

36" or 42"

17" or 25 ½˝

24˝

24˝

36" or 42"

18 /˝29 /˝

14 /˝ Ror 25 /˝ R

Spec book

Base

Cab

inet

s



Sink Front Bottom

A SFB2336

• Designed to be used as an optional cabinet bottom with SF24, SF24B, SF24FH, SF30B, SF30BFH, and SB36B sink fronts

• Fits SF36B and SF36BFH without field trimming; field trim to length required for remaining sizes

• 36 7/16” long x 23 3/16” wide• 3/8” thick engineered wood with easy clean natural

woodgrain laminate on one side; backside unfinished• Installation screws included- SDT orderable; shipped as SST

+ SST @K - SDT @K CFO @G

23 /˝ 36 /˝

/˝

Spec book

Base Cabinets

E11Base Corner Cabinets

Base Corner CabinetsConstruction Options and Modifications


SST Construction - - - - - - - - - - - - K SDT Construction - - - - - - - - - - - - K HDS Half Depth Shelf - - - - - - - - - - D FDS Full Depth Shelf - - - - - - - - - - D 1ST 1 Standard Tray - - - - - - - - - - D 2ST 2 Standard Trays - - - - - - - - - - D 1FT 1 Standard Full -Width Tray - - D 2FT 2 Standard Full -Width Trays - D CFO Cabinet Front Only - - - - - - - - G

A C D BBC39/42 BR HDS

Base Blind Corner Cabinet Information

• Base blind corner cabinets provide access to corner space and permit adjustability of up to 2 7/8” maximum to aid in kitchen layout. Consult chart for “pull” dimensions and minimum wall space requirements

• “Pulling” the cabinet away from the corner (adding up to 2 7/8” maximum to the void area), and using the supplied filler and panel, provides clearance for opening doors and drawers when decorative hardware is used

• BR or BL indicates blind end of cabinet. Please specify.• Door hinged on same side as blind. • Front and back face frames are pre -drilled for optional roll -out trays• Full overlay products must be pulled the maximum 2 7/8” for proper hardware clearance• Note: A 3” Base Filler and Blind Panel is included with each BBC cabinet ordered, shipped

unattached

BBC39/42

BBC42/45

BBC45/48

BBC48/51

(C)Frame Opening

Traditional Overlay

(B) Cabinet

Width

30"

36"

42"

48"

NoPull

MaxPull

41 /"

44 /"

47 /"

50 /"

5" h x 10 ½" w

5" h x 13 ½" w

5" h x 16 ½" w

5" h x 19 ½" w

10 ½" w x 20 ½ h13 ½" w x 20 ½ h16 ½" w x 20 ½ h19 ½" w x 20 ½ h

DrawerOpening

DoorOpening

NoPull

MaxPull

(A)Wall Space


1 /"

1 /"

1 /"

1 /"

4 ½"

4 ½"

4 ½"

4 ½"

Base Blind

Corner

BBC39/42

BBC42/45

BBC45/48

BBC48/51

Full Overlay

30"

36"

42"

48"

41 /"

44 /"

47 /"

50 /"

5" h x 10 ½" w

5" h x 13 ½" w

5" h x 16 ½" w

5" h x 19 ½" w

10 ½" w x 20 ½ h13 ½" w x 20 ½ h16 ½" w x 20 ½ h19 ½" w x 20 ½ h

39"

42"

45"

48"

39"

42"

45"

48"

/"

/"

/"

/"

3 /"

3 /"

3 /"

3 /"

34 ½˝

24˝

Blind Right (BR) 1st option shown

Base Blind Corner

AB

D

C

Filler and Panel

Frame Opening

BBC Cabinet (Blind Rig ht)

AdjoiningCabinet

3˝3˝

34 ½˝

24 /˝

Peninsula Base Blind CornerFDS option shown

(excluding door and drawer)

Sink PBBC24/27

PB

ll

Kitchen Side Peninsula Side

Blind panelw/3” filler

24 /˝

3” Fillerw/toekick

backer

Peninsula Base Blind Corner

Spec book

Base

Cab

inet

s

E12 Base Corner Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . BBC39/42BR

Base Blind Corner

A D Specify BR or BL BBC39/42 BR or BL HDS BBC42/45 BR or BL HDS BBC45/48 BR or BL HDS BBC48/51 BR or BL HDS

• Standard height top drawer• Door hinged to frame center stile• Blind Panel with 3” filler included,

shipped unattached• Do not pull cabinet more than 2 7/8”

from corner• Back panel is pre -drilled for optional



+ SST @K ) SDT @K + HDS @D ) FDS @D ) 1ST @D 2ST @D 1FT @D 2FT @D ) CFO @G

34 ½˝

24˝

Blind Right (BR)1st option shown

Peninsula Base Single Door Blind Corner

A C D Specify R or L PBBC24/27 R or L FDS

• Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”

from wall• One door on peninsula side• One standard height top drawer opens

on peninsula side• Use to start a peninsula run• One 3” filler (BF3) and toespace

assembly (toekick backer) included, shipped unattached

• Blind Panel with 3” filler included, shipped unattached

• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet

+ SST @K ) SDT @K HDS @D ) FDS @D ) 1ST @D ) 2ST @D 1FT @D 2FT @D CFO @G3˝

3˝

34 ½˝

24 /˝

FDS option shown*(excluding doors and drawer)

Spec book

Base Cabinets

E13Base Corner Cabinets


Peninsula Base Butt Door Blind Corner

A D PBBC24/27B FDS

• Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”

from wall• Butt doors without frame center stile on

peninsula side• One standard height top drawer opens

on peninsula side• Use to start a peninsula run• One 3” filler (BF3) and toespace

assembly (toekick backer) included, shipped unattached

• Blind Panel with 3” filler included, shipped unattached

• Front and back face frames are pre -drilled for optional roll out trays

• Note: Full depth shelf (FDS) option or a tray option must be selected for this cabinet

+ SST @K ) SDT @K HDS @D ) FDS @D 1ST @D 2ST @D ) 1FT @D ) 2FT @D CFO @G

3˝3˝

34 ½˝

*24 /˝

FDS option shown*(excluding doors and drawer)

Base Lazy Susan

A BLS36

• Two 28” diameter high impact, pie -cut revolving white plastic shelves

• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.

• Doors and shelves revolve as one unit• Available in Traditional Overlay door

styles only• Use Base End Panel Filler (BEPF3 -34) if

end is exposed (requires 3” of space)- SDT orderable; shipped as SST

+ SST @K - SDT @K HDS @D FDS @D 1ST @D 2ST @D 1FT @D 2FT @D CFO @G

14 /˝

12˝

24˝

12˝24˝

36˝

36˝

6˝

6˝

28˝ shelf

diameter

34 ½˝

24˝ 24˝

Spec book

Base

Cab

inet

s

E14 Base Corner Cabinets


Base Corner Revolving

A C Specify R or L BCR33 R or L BCR36 R or L

• Two 28” diameter high impact, pie -cut revolving white plastic shelves

• Shelves rotate independently of doors and each other

• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.

• Shelf height cannot be adjusted• Two piece bi -fold door with

independent adjustment• Use Base End Panel Filler (BEPF3 -34) if

end is exposed (requires 3” of space)• 168° opening hinges on face frame door• Available in Full Overlay Door styles

only• Full Overlay door style face frame stiles

are notched to accept door hinges. Door hinging cannot be inverted in field

- SDT orderable; shipped as SST

? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door opening. Options available:

A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension

+ SST @K - SDT @K HDS @D FDS @D 1ST @D 2ST @D 1FT @D 2FT @D ) CFO @G

34 ½˝

24˝ 24˝Right Hand Hinging shown

14 /˝

9˝

24˝

9˝24˝

33˝

33˝

6˝

6˝

28˝ shelf

diameter

BCR33

14 /˝

12˝

24˝

12˝24˝

36˝

36˝

6˝

6˝

28˝ shelf

diameter

BCR36

Base Corner Fixed Shelf

A C Specify R or L BCFS36 R or L

• One fixed, pie -cut shelf in center position

• Two piece bi -fold door with independent adjustment

• 168° opening hinges on face frame door• Full Overlay door style face frame stiles

are notched to accept door hinges. Door hinging cannot be inverted in field

• Use Base End Panel Filler (BEPF3 -34) if end is exposed (requires 3” of space)


? Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet

door opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension

+ SST @K - SDT @K HDS @D FDS @D 1ST @D 2ST @D 1FT @D 2FT @D ) CFO @G

36˝

24˝ 12˝

14 /˝

36˝

24˝

12˝

6˝

6˝

34 ½˝

24˝24˝

Left Hand Hinging shown

Spec book

Base Cabinets

E15Base Accessories

Base AccessoriesConstruction Options and Modifications



A BF3

Base Wastebasket Floor Mount Kit Single

A BWBFMK

• White epoxy coated wire• Requires base cabinet roll -out tray in the

bottom position, not included• Fits base cabinets 15” or wider• Includes 30 -qt. white plastic bin• Installation instructions and mounting

hardware included• One per carton


9 ½˝

18˝

15 ½˝

Base Wastebasket Floor Mount Kit Double

A BWBFMK-2

• White epoxy coated wire• Bins mounted on white laminated

platform with full extension slides• 11 1/2” wide pull out, fits minimum 15”

single door cabinet or 27” double door cabinet unless cabinet is butt door

• Includes two 27 -qt. white plastic bins• Load rated at 40 lbs.• Does not fit 9” or 12” wide base or 27” wide base with

center stile• Installation instructions and mounting hardware included• One per carton


22˝ 11 ½˝

19 ½˝

Base Wastebasket Top Mount Kit

A BWBTK15 BWBTK18-2

• Fits B15 or B18 cabinets• BWBTK15 includes one 35 qt. white

plastic basket and one 5 1/2” deep white plastic tray for garbage bag storage

• BWBTK18 includes two 35 qt. white plastic baskets (no bag storage tray)

• Top mounted wastebasket assembly rolls out on full -extension ball -bearing slides

• Hardwood veneer tray supports easily removable basket(s)• 35 qt. basket is 10 1/2” x 14 5/8” x 18” high• Installation instructions and mounting hardware included• One per carton


BWBTK18-2 shown

Spec book

Base

Cab

inet

s

E16 Base Accessories

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . BF3

Cutlery Divider

A CDI18

• Natural woodgrain laminate• Five compartment cutlery organizer for

18” wide cabinets; can be cut down for 15” wide cabinets

• When used in 18” wide, 3/4” dovetail deluxe drawer base, 1 7/16” must be field cut off back edge

• One per carton


2 ½˝

12 /˝20 /˝

Utility Tray Kit

A UTK12 UTK22

• Removable high -impact white plastic tray installs on backside of drawer front for convenient out -of -sight storage of small items, soap, scouring pads, etc.

• UTK22 fits sink base cabinets 27” through 39” wide

• UTK12 fits sink base cabinets 30” or wider

• Concealed self -closing hinges allow drawer front to tilt down 51º for tray access

• Hinge detent holds drawer front in full open position• Order decorative hardware separately• Installation instructions and mounting hardware included• UTK12 offered one pair per carton: UTK22 offered one

per carton

< If installing one UTK12 on a 24” or 27” wide sink base, consider utilizing the second tray on the backside for storage


2˝

UTK12

3 /˝11˝

3 /˝ 22˝

2 /˝

UTK22

Base Filler

A BF3 BF6

• 3/4” thick solid wood• Backside of filler not finished• For right or left hand use• Available in all finishes; Maple Accent


Maple • Toespace (toekick backer assembly) included, shipped

unattached• One per carton

+ HW @P + MP @P + RO @P + TH @P

3˝, 6˝

34 ½˝

¾˝

Base Filler Corner

A BFC3

• Used to provide clearance between cabinets when corner space is not used

• 3/4” thick solid wood• 3” faces• Available in all finishes; Maple Accent


Maple • Shipped assembled• One per carton

+ HW @P + MP @P + RO @P + TH @P

3˝x 3˝

34 ½˝

¾˝

Spec book

Base Cabinets

E17Base Accessories

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . BF3

Base End Panel

A BEP BEP-6

• Used to trim or flush out laminate exposed end of base cabinet

• For right or left hand use• 3/16” thick veneered plywood panel,

except White, finished on one side; grain runs lengthwise

• 3/16” thick laminate panel for White; finished on one side only

• Available in all finishes; Maple Accent Glaze shipped standard finish

• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• Trimmed to fit installation• Offered individually or six per carton

+ HW @P + MP @P + RO @P + TH @P

Field cutToespace

Grain Direction

/˝

23 ½˝

34 ½˝

Base End Panel Filler

A BEPF3-34 BEPF3-34-2 BEPF6-34

• Used on the end of cabinet run to conceal dishwasher or cap end of BCFS/BCR/BLS cabinets

• For right or left hand use• Available in all finishes; Maple Accent

Glaze shipped standard finish• Chiffon, Cotton and White have painted

Maple Filler• Available in all finishes• Toespace notch must be field cut• BEPF3 -34 offered individually or two per carton; BEPF6 -34

only offered individually

+ HW @P + MP @P + RO @P + TH @P

24˝

34 ½˝

3˝, 6˝Field cutToespace

Filler

3˝, 6˝

/˝

¾˝

2 /˝ 5 /˝

Exterior Interior

¼˝

Matching Base End Panel

A MBEP2434

• Provides a finished furniture look to base cabinet ends

• 3/16” thick veneered plywood, except Arbor Falls Express

• 3/16” thick white laminate panel for Arbor Falls Express

• Includes end panel with decorative door• For right or left hand use• Toespace notch must be field cut• Traditional overlay doors are 22 1/4” x 28” tall shipped

attached to panel • Full overlay doors are 23 5/8” x 29 1/4” tall shipped

unattached to panel. When installed, door overlaps cabinet frame edge to provide matching reveals

• Chiffon and Cotton are painted Maple• One per carton

+ HW @P + MP @P + RO @P + TH @P

Field cutToespace

/˝

34 ½˝

23 ¼˝

Base

Cab

inet

s

E18

Notes

Spec book

Spec book

Tall Cabinets

F1Tall Cabinets

Tall CabinetsConstruction Options and Modifications


Note: Standard tall cabinet box depth is 12” or 24” unless stated otherwise. Add door thickness with bumpers for total depth.

Material dimensions may vary slightly based on lumber industry standards.



A C U1884 L

Tall Utility Cabinet 12” Deep

A C Specify R or L

84” High U1884 R or L U2484 R or L U3084B 90” High U1890 R or L U2490 R or L U3090B 96” High U1896 R or L U2496 R or L U3096B

• Fixed shelf between top and bottom section with adjustable shelves in top section: 84” high -no shelves; 90” high -1 shelf; 96” high -2 shelves


• Tall doors are two -piece panel construction except Arbor Falls Express

• Arbor Falls Express tall doors have a single raised panel profile

• 30” cabinets have 3” wide center stile in upper section only• Interior height of tall section on 84” and 96” tall cabinets is

60 15/16”; 90” tall is 61 7/16”• 96” tall cabinets include toe kick platform, shipped

unattached• Toe Kick cover required on exposed sides of toe kick

platform• End panels of bottom section are pre -drilled for optional

shelves


12˝

84˝90˝96˝

12˝

84˝90˝96˝

<If ordering a 96” high unit, consider ordering a tall end panel to flush out the exposed side

Spec book

Tall

Cabi

nets

F2 Tall Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . U1884L

Tall Utility Cabinet 24” Deep

A C Specify R or L

84” High U188424 R or L U248424 R or L U308424B 90” High U189024 R or L U249024 R or L U309024B 96” High U189624 R or L U249624 R or L U309624B





• 30” cabinets have 3” wide center stile in upper section only

• Interior height of tall section on 84” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”

• 96” tall cabinets include toe kick platform, shipped unattached

• Toe Kick cover required on exposed sides of toe kick platform

• End panels of bottom section are pre -drilled for optional shelves and Roll -out Trays (ROT)


24˝

84˝90˝96˝

24˝

84˝90˝96˝

Utility Front

A C Specify R or L

84” High UF1884 R or L UF2484 R or L 90” High UF1890 R or L UF2490 R or L 96” High UF1896 R or L UF2496 R or L

• Includes face frame and appropriate hinged doors only




• Does not include toespace (toekick backer) assembly


18˝, 24˝

79 ½˝85 ½˝91 ½˝


Spec book

Tall Cabinets

F3Tall Appliance Cabinets

Oven Cabinet Universal

A 84” High OCU3084B OCU3384B 90” High OCU3090B OCU3390B 96” High OCU3096B OCU3396B


• Three full -width drawer openings at bottom

• BUTT doors without a frame center stile• Includes one full -width drawer. Order additional drawer(s)

as needed. See Oven Drawer Kit (ODK)• Face -mounted door hinges provide matching frame

reveals• Center section accommodates single and double ovens by

trimming or removing horizontal cross rails• 3” wide trimmable vertical stiles provide opening width

adjustment • Face frame rails are attached to stiles with screws on the

back side for easy removal• 96” tall cabinets include toe kick platform, shipped

unattached• Toe Kick cover required on exposed sides of toe kick

platform• Includes adjustable 1” thick engineered wood oven

platform with heavy -duty mounting brackets and screws that install into pre -drilled end panel holes. Order additional support platform kits as needed. See Oven Cabinet Shelf Platform (OCSP)

+ SST @K ) SDT @K ) CFO @G

84˝90˝96˝

24˝96” shown

Oven Cabinet Single

A 84” High OCS3084B OCS3384B 90” High OCS3090B OCS3390B 96” High OCS3096B OCS3396B


• One adjustable shelf in bottom section• BUTT doors without a frame center stile• Cabinet doors are: 5 1/2” shorter on top than the bottom

for 84” high cabinets, are equal height on 90” high cabinets and are 6 1/2” taller on top than the bottom for 96” high cabinets

• Center section accommodates single ovens • 3” wide, trimmable stiles provide opening width

adjustment for painted finishes. All stain finishes have 1 1/2” wide removable, trimmable vertical stiles for easy adjustment

• 96” tall cabinets include toe kick platform, shipped unattached


• Includes adjustable 1” thick engineered wood oven platform with heavy -duty mounting brackets and screws that install into pre -drilled end panel holes. Order additional support platform kits as needed. See Oven Cabinet Shelf Platform (OCSP)


84˝90˝96˝

24˝96” shown



Tall Appliance CabinetsConstruction Options and Modifications


AOCU3084B


Spec book

Tall

Cabi

nets

F4 Tall Appliance Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . OCU3084B

Oven Drawer Kit

A ODK30 ODK33

• Available in all door styles• Available with solid wood dovetail

drawer core with under -mount drawer glides

• Kit includes; 1 drawer front, 1 drawer core, slides and all mounting hardware

+ SST @K ) SDT @K CFO @G

Oven Cabinet Support Platform

A OCSP30 OCSP33

• For installing second appliance in Oven Cabinet Universal (OC_U)

• Same shelf platform and hardware as included with Oven Cabinet Universal (OCU)

• 1” thick engineered wood • Includes four heavy -duty metal mounting brackets and

eight screws which install into pre -drilled holes in cabinet end panels



OCSP30OCSP33

28 ¼˝31 ¼˝ 22 /˝

22 /˝

Spec book

Tall Cabinets

F5Tall Accessories

Tall AccessoriesConstruction Options and Modifications



A MTEP2496

Tall Filler

A TF3-84 TF3-90 TF3-96

• 3/4” thick solid wood• Available in all finishes; Maple Accent


Maple • Toespace (toekick backer assembly)

included, shipped unattached• One per carton

+ HW @P + MP @P + RO @P + TH @P

84˝90˝96˝

3˝

¾˝

Tall End Panel

A TEP84 TEP96

• Optional panel used to trim or flush out laminate exposed end of tall cabinet

• Can also be used as decorative panel on doors of side by side refrigerator where trim kits from the refrigerator manufacturer are available

• For right or left hand use• 3/16” thick veneered plywood panel, except White,

finished on one side and grain runs lengthwise• 3/16” thick laminate frontside and unfinished backside

panel for White• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• Trimmed to fit installation• One per carton

+ HW @P + MP @P + RO @P + TH @P

FieldcutToespace

Grain Direction

84˝96˝

23 ¼˝

Spec book

Tall

Cabi

nets

F6 Tall Accessories

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . TEPF1-84

Tall End Panel Filler

A TEPF1-84 TEPF1-96

• Use next to refrigerator to conceal side, also supports 24” deep wall cabinet over refrigerator

• 1/2” thick plywood panel with matching veneer finish, except White

• 1/2” thick laminate on both sides, panel for White

• Available in all finishes, except Maple Accent Glaze shipped standard finish

• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• One per carton

+ HW @P + MP @P + RO @P + TH @P

24˝

84˝96˝

1 ½˝Wide Filler

Field cutToespace

Exterior Interior

½˝

1 ½˝

¾˝

/˝ /˝

Matching Tall End Panel

A 84” High MTEP1284 MTEP2184 MTEP2484 90” High MTEP1290 MTEP2190 MTEP2490 96” High MTEP1296 MTEP2196 MTEP2496

• For right or left hand use• 3/16” thick plywood panel with one

short and one tall decorative door, except Arbor Falls Express

• 3/16” thick white laminate panel with one short and one tall decorative door for Arbor Falls Express

• All Full Overlay door styles overlap cabinet frame to match reveals

• Toespace notch must be field cut• Doors and panel are shipped separately; field assembly

required• Available in all door styles and finishes• Provides a finished furniture look to Oven Cabinet Single

(OCS), Oven Cabinet Universal (OCU), Utility Cabinet (UC) and Vanity Linen Tall (VLC) cabinet ends

+ HW @P + MP @P + RO @P + TH @P

FieldcutToespace

11 ¼˝, 20 ¼˝, 23 ¼˝

Grain Direction

84˝90˝96˝

Panel

Panel

Panel Size

Item Width Height

MTEP1284MTEP2184MTEP2484MTEP1290MTEP2190MTEP2490MTEP1296MTEP2196MTEP2496

84"84"84"90"90"90"96"96"96"

11 1/˝20 1/˝23 1/˝11 1/˝20 1/˝23 1/˝11 1/˝20 1/˝23 1/˝

Spec book

Vanity Cabinets

G1Vanity Cabinets

Vanity CabinetsConstruction Options and Modifications



A C VB12 L

Vanity Base Single Door

A C Specify R or L

21” Deep 31 1/2” High

VB12 R or L VB15 R or L VB18 R or L VB21 R or L Specify R or L

21” Deep 34 1/2” High

VB1235 R or L VB1535 R or L VB1835 R or L VB2135 R or L VB2435 R or L

• Standard height top drawer• Back is pre -drilled for optional bottom

and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)

+ SST @K ) SDT @K ) CFO @G31 ½˝

34 ½˝

21˝

Vanity Base Single Door Full-Height

A C 31 1/2” High

18” Deep VB1818FH R or L VB2118FH R or L 21” Deep VB18FH R or L VB21FH R or L VB24SFH R or L 34 1/2” High

18” Deep VB243518SFH R or L 21” Deep VB1835FH R or L VB2135FH R or L VB2435SFH R or L

• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)

• Full -height door• Accessory roll -out tray not available for

VB2118FH


31 ½˝34 ½˝

18˝, 21˝

Vanity Base Double Door

A 34 1/2” High VB2435B

• Standard height top drawer • BUTT doors without a frame center stile• Back is pre -drilled for optional bottom


+ SST @K ) SDT @K ) CFO @G34 ½˝

21˝

Spec book

Van

ity

Cabi

nets

G2 Vanity Cabinets

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . VB12L

Vanity Base Double Door Full-Height

A 31 1/2” High - 18” Deep VB3018BFH VB3618BFH VB4218FH 34 1/2” High - 18” Deep VB243518BFH VB303518BFH VB363518BFH

A 31 1/2” High - 21” Deep VB30BFH VB36BFH VB42FH 34 1/2” High - 21” Deep VB2435BFH VB3035BFH VB3635BFH VB4235FH


• Two Full -height doors• Back is pre -drilled for optional bottom


• Accessory roll -out tray not available for VB4218FH


31 ½˝34 ½˝

18˝, 21˝

Vanity Base Three Door Full-Height

A 18” Deep

31 1/2” High VB4818FH 21” Deep

31 1/2” Deep VB48FH 21” Deep

34 1/2” High VB4835FH

• Middle door on 48” cabinets is 3” wider than outer doors

• Full -height doors• Center door is hinged right• Back is pre -drilled for optional bottom

and mid -height accessory Roll -out Trays (ROT) that fit behind outer doors


34 ½˝

18˝, 21˝ 15˝ 18˝ 15˝

Vanity Base Four Door Full-Height

A 18” Deep

31 1/2” High VB6018FH 21” Deep

31 1/2” High VB60FH

• Actual cabinet width is 59 1/2”, frame stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”

• Traditional overlay inner doors are 12 5/8” wide and outer doors are 13 1/4” wide. Full overlay inner doors are inner doors are 14” wide and outer doors are 14 5/8”

• Full -height doors• Door left of center hinged left, door right of center hinged

right• 3 3/16” wide full -width support crossrail across top front

of cabinet• Back is pre -drilled for optional bottom and mid -height

accessory Roll -out Trays (ROT) that fit behind outer doors• Roll -out Trays (ROT) are not available for center doors


31 ½˝

18˝, 21˝ 12 /˝ 14˝

12 /˝ 14˝13 ¼˝

14 /˝

13 ¼˝14 /˝

Vanity Sink Base Butt Door

A 21” Deep

31 1/2” High VSB30B VSB36B VSB42 21” Deep

34 1/2” High VSB2435B VSB3035B VSB3635B VSB4235

• No shelf• VSB42 and VSB4235 have a double door

with a frame center stile• All cabinets have one full -width drawer

front except VSB42 and VSB4235 which have two drawer fronts




31 ½˝34 ½˝

21˝

Spec book

Vanity Cabinets

G3Vanity Cabinets


Vanity Sink Base Double Bowl

A VSB60-3D VSB6035-4D

• VSB 31 1/2” high cabinets have 3 drawers in the center section, 1 top drawer of standard height, 2 deep drawers below

• VSB 34 1/2” high cabinets have four drawers in the center section, three top drawers of standard height and one deep drawer below

• One full -width false drawer front above doors• Traditional overlay doors are 18 5/8” wide. Full overlay

doors are 20” wide• Actual cabinet width is 59 1/2”, frame stiles are extended

and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”

• 3 3/16” wide full -width support crossrail across top front of cabinet

• Opening on each end for sink installation is 21 1/4”


31 ½˝34 ½˝

21˝ 20 ¾˝18˝

20 ¾˝

Vanity Sink Base Two Drawer Double Door

A 21” Deep

31 1/2” High VSB36-2D 21” Deep

34 1/2” High VSB3635-2D

• Standard height top drawer• False front only between drawers• Space between drawers for sink

installation is 18”• Back is pre -drilled for optional bottom



21˝

31 ½˝34 ½˝

Vanity Sink Base Two Drawer Three Door

A 21” Deep

31 1/2” High VSB42-2D VSB48-2D 34 1/2” High VSB4235-2D VSB4835-2D

• Two standard height top drawers• Drawer front only between top drawers• Center door is hinged right• Middle door on 42” cabinets is 6” wider

than outer doors• Middle door on 48” cabinets is 3” wider than outer doors• Back is pre -drilled for optional bottom and mid -height

accessory Roll -out Trays (ROT) that fit behind outer doors• Space between drawers for sink installation is 21”


21˝

31 ½˝34 ½˝

12˝

12˝18˝

Vanity Sink Base Two Drawer Four Door

A 21” Deep

31 1/2” High VSB60-2D 34 1/2” High VSB6035-2D

• Two standard height top drawers• Drawer front only between top drawers• Door left of center hinged left, door right

of center hinged right• Actual cabinet width is 59 1/2”, frame

stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”

• Space between drawers for sink installation is 31 3/4”• Traditional overlay inner doors are 12 5/8” wide and outer

doors are 13 1/4” wide. Full overlay inner doors are inner doors are 14” wide and outer doors are 14 5/8”


• Back is pre -drilled for optional bottom and mid -height accessory Roll -out Trays (ROT) that fit behind outer doors

• Roll -out Trays (ROT) are not available for center doors


21˝

31 ½˝34 ½˝

Spec book

Van

ity

Cabi

nets

G4 Vanity Cabinets


Vanity Combination Drawer Two Drawer

A Specify DR or DL

18” Deep 31 1/2” High

VCD2418 DR or DL VCD3018 DR or DL VCD3618 DR or DL 21” Deep VCD24 DR or DL VCD30 DR or DL VCD36 DR or DL

• One door and one full -width drawer front above door and drawers

• Specify DL (Drawer Left) or DR (Drawer Right) position for drawers



18˝, 21˝

31 ½˝

Vanity Combination Drawer Three Drawer

A Specify DR or DL

21” Deep 34 1/2” High

VCD2435 DR or DL VCD3035 DR or DL VCD3635 DR or DL

• One door and one full -width drawer front above door and drawers

• Specify DL (Drawer Left) or DR (Drawer Right) position for drawers



21˝

34 ½˝

Vanity Combination Drawer Six Drawer Single Door

A 18” Deep

31 1/2” High VCD4218 VCD4818 21” Deep VCD42 VCD48

• Two standard height top drawers and four deep lower drawers

• Center door is hinged right• Drawer front only between top drawers• Space between drawers for sink

installation is 21”• Back is not pre -drilled for optional bottom and mid -

height accessory Roll -out Trays (ROT)


18˝, 21˝

31 ½˝

12˝15˝

12˝15˝18˝

18˝

Vanity Combination Drawer Eight Drawer Single Door

A 21” Deep

34 1/2” High VCD4235 VCD4835

• Six standard height and two deep drawers

• Center door is hinged right• Drawer front only between top drawers• Space between drawers for sink

installation is 21”• Back is pre -drilled for optional bottom and mid -height

accessory Roll -out Trays (ROT) and Vanity Tray Kits (VTK)


21˝

34 ½˝

12˝15˝

12˝15˝18˝

18˝

Spec book

Vanity Cabinets

G5Vanity Cabinets


Vanity Combination Drawer Six Drawer Double Door

A 18” Deep

31 1/2” High VCD6018 21” Deep VCD60

• Two standard height top drawers and four deep lower drawers

• Drawer front only between top drawers• Door left of center hinged left, door

right of center hinged right• Actual cabinet width is 59 1/2”, frame



• Space between drawers for sink installation is 31 3/4”• Accessory Roll -out Trays not available


18˝, 21˝

31 ½˝

Vanity Combination Drawer Eight Drawer Double Door

A 21” Deep

34 1’2” high VCD6035

• Six standard height top drawers and two deep lower drawers

• Drawer front only between top drawers• Door left of center hinged left, door right

of center hinged right• Actual cabinet width is 59 1/2”, frame



• Space between drawers for sink installation is 31 3/4”• Accessory Roll -out Trays not available


21˝

34 ½˝

Vanity Drawer Three Drawer

A 18” Deep

31 1/2” High VD1218-3D VD1518-3D VD1818-3D VD2118-3D VD2418-3D

A 21” Deep

31 1/2” High VD12-3D VD15-3D VD18-3D VD21-3D VD24-3D 34 1/2” High VD1235-3D VD1535-3D VD1835-3D VD2135-3D VD2435-3D

• One standard height top drawer and two deep drawers below + SST @K

) SDT @K ) CFO @G

18˝, 21˝

31 ½˝34 ½˝

Vanity Linen Cabinet Tall

A C VLC1884 R or L VLC2484 R or L VLC1890 R or L VLC2490 R or L VLC1896 R or L VLC2496 R or L


• End panels of bottom section are pre -drilled for optional shelves and Roll -out Trays (ROT).

• Bottom, tall doors are two -piece panel construction, except Arbor Falls Express, which has a single raised panel profile

• Interior height of tall section on 84” and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”

• 96” high cabinets include toe kick platform shipped unattached for easier handling and installation


+ SST @K + SDT @K ) CFO @G84˝

90˝96˝

21˝ 18˝, 24˝

Spec book

Van

ity

Cabi

nets

G6 Vanity Cabinets


Vanity Wall Boutique - 7” Deep

A VWB2430B

• One adjustable shelf• Exposed full -depth fixed shelf in lower

section• No towel bar• Matching color laminate interior and shelves• Back panel has vertical grain except Chiffon, Cotton and White• 5” high frame opening in lower section • BUTT doors without a frame center stile• Cabinet back extends through opening in lower section


7˝

30˝

24˝

Vanity Wall - 4 3/4” Deep

A C Specify R or L VW1530 R or L

• Three adjustable shelves• Surface mount


30˝

15˝4 ¾˝

Medicine Cabinet

A MC1627

• For surface mount or recess installation• Cutout required for recessed installation;

14 1/2” wide, 25 3/4” high, 3 1/2” deep• Door is 3/16” thick plate glass mirror with

rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer

• Three adjustable 5/8” thick no -tilt shelves with clear shelf supports

• Hinged right• Cabinet can be inverted, magnetic latch must be relocated• Maple laminate interior• Solid wood frame has profile on all four outside edges

complementing; Seneca Ridge Express and Spring Valley Express door styles


• Chiffon, Cotton and White are painted Maple • Mounting hardware included• Mirror door shipped unattached for easier handling and

installation- SDT orderable; shipped as SST


27˝

4 ¼˝

16˝

Tri-View Medicine Cabinet

A TVMC2430 TVMC3030 TVMC3630

• For surface mount or recess installation• Three adjustable 5/8” thick no -tilt shelves

with clear shelf supports• Doors are 3/16” thick plate glass mirror with

rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer

• Left and center doors hinged right, right door hinged left to create a three -way reflection

• Vertical divider between center and left hand door in 30” and 36” cabinet

• Solid wood frame has profile on all four outside edges complementing; Seneca Ridge Express and Spring Valley Express door styles


• Chiffon, Cotton and White are painted Maple • Mirror door shipped unattached for easier handling and

installation• Mounting hardware included


30˝

4 ¼˝

Spec book

Vanity Cabinets

G7Vanity Accessories

Vanity AccessoriesConstruction Options and Modifications



A VF3

Vanity Filler

A VF3

• 3/4” thick solid wood• Backside of filler not finished• Available in all finishes; Maple Accent




+ HW @P + MP @P + RO @P + TH @P

3˝

31 ½˝

¾˝

Tall Filler

A TF3-84 TF3-90 TF3-96

• 3/4” thick solid wood• Available in all finishes; Maple Accent




+ HW @P + MP @P + RO @P + TH @P

84˝90˝96˝

3˝

¾˝

Matching Vanity End Panel

A MVEP2131 MVEP2135

• Provides a finished furniture look to vanity cabinet ends

• Includes end panel with decorative door• For right or left hand use• 3/16” thick veneered plywood panel,

except Arbor Falls Express• 3/16” thick white laminate panel for

Arbor Falls Express• Available in all door styles and finishes• Full overlay door styles shipped unattached to panel.

When installed, door overlaps cabinet fram edge to provide matching reveals

• Traditional overlay door styles: door shipped attached to panel

• Chiffon and Cotton are painted Maple• Toespace notch must be field cut• One per carton

+ HW @P + MP @P + RO @P + TH @P

Field cutToespace

31 ½˝34 ½˝

20 ¼˝21˝

/˝

Item

MVEP2131

MVEP2135

20 ¼˝

20 ¼˝

Width

31 ½˝

34 ½˝

Height

26 ¼˝

29 ¼˝

Height

20 /˝

20 /˝

Width

25˝

28˝

Height

19 ¼˝

19 ¼˝

Width

Panel Size

Full Overlay

PartialOverlay

Van

ity

Cabi

nets

G8

Notes

Spec book

Spec book

Office Cabinets

H1Office Cabinets

Office CabinetsConstruction Options and Modifications



A DKD3018

Desk Knee Drawer

A DKD3018 DKD3618 DKD30 DKD36

• Designed for use between base, desk, vanity, tall cabinets or with desk leg on one end

• Full -width top panel is recessed for easier installation

• Drawer front is profiled on all edges• Traditional overlay door styles; face frame stiles may be

trimmed a maximum 3/4” each allowing the DKD width to be reduced a maximum of 1 1/2”

• Full overlay door styles; face frame stiles are not trimmable• Drawer fronts are solid slab, except Ralston Express• Ralston Express drawer fronts are same construction as

standard fronts; except the stiles and rails are narrower (1 1/2” wide)

• Requires countertop or writing surface


4 ½˝

30˝ 36˝

18˝ 21˝

Spec book

Offi

ce C

abin

ets

H2 Office Cabinet Accessories

Office Cabinet AccessoriesConstruction Options and Modifications



A DEP2431

Desk End Panel

A DEP2431

• Used to support end of Desk Knee Drawer (DKD). Fits behind extended frame stile

• 3/4” thick engineered wood core (SST) with vertical grain veneer on both sides and front edge for Maple and Oak

• 3/4” thick engineered wood core (SST) with white laminate on both sides and matching edge banding on front edge for White

• SDT orderable; shipped as SST• Available in all finishes; Maple Accent Glaze shipped

standard finish• Chiffon and Cotton are painted Maple• Field cut to correct height where applicable• One per carton

+ HW @P + MP @P + RO @P + TH @P

5 /˝

31 ½˝

23 ¼˝

¾˝

Spec book

Panels-Shelving-Trays

I1Panels

PanelsConstruction Options and Modifications



A PB4896P

Panel Backer-Paper

A PB4896P PB4896P-2

• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations

• Medium Density Fiberboard (MDF) panel with easy clean laminate on front side and unfinished backside

• Accent glaze shipped as standard finish • Available in Chiffon, Cotton and White• Chiffon and Cotton glazes are shipped as standard finish• Offered individually or two per carton

+ HW @P + MP @P + RO @P + TH @P

4’

GrainDirection

8’

/˝

Panel Backer-Veneer

A 4’ x 8’ PB4896 PB4896-2 8’ x 4’ PB9648 PB9648-2

• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations

• Veneered plywood panel finished on one side

• Accent glaze shipped as standard finish • PB9648 and PB9648 -2 are not available in

Cotton and Chiffon• Chiffon and Cotton glazes are shipped as standard finish• Offered individually or two per carton

+ HW @P + MP @P + RO @P TH @P

4’

GrainDirection

8’

/˝

PB4896 shown

GrainDirection

8’

/˝

4’

PB9648 shown

CoreGuard® Panel Backer

A CGPB36

• Light beige engineered polymer• Used to patch backs of CoreGuard®

cabinets• One per carton


34 /˝

26 /˝

/˝

Spec book

Pane

ls-S

helv

ing-

Tray

s

I2 Shelving

ShelvingConstruction Options and Modifications



G USK1812-3/4

Shelf Kits

A Utility Shelf Kit 10 19/32” deep USK1812-3/4 16 1/4” wide USK2412-3/4 22 1/4” wide USK3012-3/4 28 1/4” wide Utility Shelf Kit 22 19/32” deep USK1824-3/4 16 1/4” wide USK2424-3/4 22 1/4” wide USK3024-3/4 28 1/4” wide Vanity Shelf Kit 19 19/32” deep VLSK1821-3/4 16 1/4” wide VLSK2421-3/4 22 1/4” wide

• Utility Shelf Kit 10 19/32” deep for use in bottom section of 12” deep utility cabinets. Utility Shelf Kit 22 19/32” deep for use in bottom section of 24” deep utility cabinets. Vanity Shelf Kit 19 19/32” deep for use in bottom section of 21” Vanity Linen Cabinets

• 3/4” thick engineered wood shelves laminated on both sides with matching edge banding on the front edge, except USK3012 -3/4

• USK3012 -3/4 has thick plywood shelves laminated on both sides and matching edge banding on the front edge

• USK3012 -3/4 includes back supports• Cabinet end panels are pre -drilled• Natural Maple laminate and White• SDT orderable; shipped as SST• Kit includes: five shelves, 20 clear supports, 30” and 36”

wide shelf kits also include five clear back supports

+ HW @P + MP @P + RO @P + TH @P

Spec book


I3Trays

TraysConstruction Options and Modifications

Note: Determine the location of plumbing and other obstructions before ordering any tray kits

A BTK12

Base Tray Kit - Standard

A BTK12 BTK15 BTK18 BTK21 BTK24 BTK27B BTK30B BTK33B BTK36B

A BTK39 BTK45

• Installs in 24” deep base and utility cabinets only using pre -drilled holes in back panels

• Includes tray core box, 3/4 extension left and right slides and installation hardware

• BTK15, BTK18, BTK24, BTK30B and BDTK36B include brackets and screws for installing in Utility Cabinets (U), utilizing pre -drilled holes in cabinets and end panels

• Tray front made of solid hardwood covered with natural woodgrain laminate; tray sides, backs and bottom panel are made of engineered wood covered with a moisture - and stain -resistant, easy clean laminate. Top edge of sides and back finished with matching edge banding

• One tray per kit

Base Tray Kit - Double Faced, Standard

A BTK18DF BTK21DF BTK24DF BTK27BDF BTK30BDF

• Installs in Peninsula Base (PB) cabinets only using pre -drilled holes in face frames




Vanity Tray Kit

A VTK12 VTK15 VTK18 VTK21 VTK24 VTK30B VTK36B

• Installs in 21” deep vanity cabinets only, using pre -drilled holes in back panel and some face frames



• VTK15, VTK18 and VTK24 includes brackets and screws for installing in tall Vanity Linen (VLC) cabinets utilizing pre -drilled holes in the end panels


Vanity Tray Kit - Space Saver

A VTKS12 VTKS15 VTKS18 VTKS24 VTKS30B VTKS36B

• Installs in 18” deep vanity space saver cabinets only, using pre -drilled holes in back panel and some face frames




Spec book

Pane

ls-S

helv

ing-

Tray

s

I4 Trays

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . BTK12

Roll-Out Trays - Solid Wood

A Vanity Cabinets

18” Deep ROT1518 ROT1818 ROT2418B ROT3018B Vanity Cabinets

21” Deep ROT1221 ROT1521 ROT1821 ROT2121 ROT2421B ROT3021B ROT3621B

A Base Cabinets

24” Deep ROT1224 ROT1524 ROT1824 ROT2124 ROT2424B ROT2724B ROT3024B ROT3324B ROT3624B ROT3924 ROT4524

• Installs in base, utility, vanity and vanity space saver cabinets utilizing pre -drilled holes in the back panel and some face frames


• .205” thick plywood bottom panel finished on the top side with a moisture and stain resistant, easy clean laminate with printed matching wood grain

• Solid hardwood tray core with 3/4” thick front and 1/2” thick sides and back

• ROT1524, ROT1824, ROT2424B, ROT3024B, and ROT3624B include brackets and screws for installing in 24” deep Utility (U) cabinets utilizing pre -drilled holes in both end panels

• ROT1521, ROT1821 and ROT2421B include brackets and screws for installing in 21” deep tall Vanity Linen Cabinets (VLC) utilizing pre -drilled holes in both end panels

• Natural finish, not available in White• One tray per kit

Spec book


I5Tray Availabilty Charts

Tray Availabilty Charts

Base Tray Kit - Standard

Item Tray Width For Use In:

BTK15

BTK12

BTK18

BTK21

BTK24

BTK27B

BTK30B

BTK33B

BTK36B

BTK39

BTK45

8 ¾˝

11 ¾˝

14 ¾˝

17 ¾˝

20 ¾˝

23 ¼˝

26 ¼˝

29 ¾˝

32 ¾˝

16 ¼˝

19 ¼˝

B12, B12FH, SB12, UB12

B15, B15FH, SB15

B18, B18FH, SB18, U188424, U189024, U189624

B21, B21FH, B42, B42FH, SB21, SB42

B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB24BFH, SB48FH, U248424, U249024

B27B, B27BFH, SB27B, SB27BFH

B33B, B33BFH, SB33B

B30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B


B39, B39FH, BBC45/48, SB39

B45, B45FH, BBC48/51

Base Tray Kit - Double Faced, Standard

BTK18DF

BTK21DF

BTK24DF

BTK27BDF

BTK30BDF


14 ¾˝

17 ¾˝

20 ¾˝

23 ¾˝

26 ¾˝

PB18

PB21

PB24, PB24B

PB27B

PB30B

Vanity Tray Kit

26 ¾"


32 ¾"

17 ¾"

20 ¾"

VTK12

VTK15

VTK18

VTK21

VTK24

VTK30B

VTK36B

14 ¾"

11 ¾"

8 ¾" VB12, VB1235, VB60FH, VCD24DR/L, VCD2435DR/L, VSB42 -2D, VSB4235 -2D

VB15, VB1535, VB48FH, VB4835FH, VCD30DR/L, VCD3035DR/L, VSB48 -2D, VSB4835 -2D, VSB60 -2D VSB6035 -2D

VB18, VB1835, VB18FH, VB1835FH, VB48FH, VB4835FH, VCD36DR/L, VCD3635DR/L, VCD42, VCD4235, VCD48, VCD4835, VLC1884, VLC1890, VLC1896, VSB36 -2D, VSB3635 -2D, VSB42 -2D, VSB4235 -2D, VSB48 -2D, VSB4835 -2D

VB21, VB2135, VB21FH, VB2135FH, VB42FH, VB4235FH, VSB42, VSB4235

VB2435, VB24B, VB2435B, VB2435BFH, VB24SFH, VB2435SFH, VLC2484, VLC2490, VLC2496, VSB2435B

VB30BFH, VB3035BFH, VSB30B, VSB3035B


Vanity Tray Kit - Space Saver


VTKS12

VTKS15

VTKS18

VTKS24

VTKS30B

VTKS36B

8 ¾"

11 ¾"

14 ¾"

20 ¾"

26 ¾"

32 ¾"

VB6018FH, VCD2418DR/L

VB303518FH, VB4818FH, VCD3018DR/L


VB243518SFH

VB3018BFH, VB303518BFH


Spec book

Pane

ls-S

helv

ing-

Tray

s

I6 Tray Availabilty Charts

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . BTK12

Roll-Out Trays - Solid Wood

Item (by depth) Tray Width For Use In:

21” Deep

24” Deep

32 ¾"

26 ¾"

20 ¾"

17 ¾"

14 ¾"

11 ¾"

8 ¾"

ROT3621B

ROT3021B

ROT2421

ROT2121

ROT1221

ROT1821

ROT1521

ROT1518

ROT1818

ROT2418

ROT3018

18” depth

ROT1224

ROT1524

ROT1824

ROT2124

ROT2424B

ROT2724B

ROT3024B

ROT3324

ROT3324B

ROT3924

ROT4524

8 ¾"

11 ¾"

14 ¾"

17 ¾"

20 ¾"

23 ¾"

26 ¾"

13 ¼"

29 ¾"

16 ¼"

19 ¼"

ROT3624B

11 ¾"

14 ¾"

20 ¾"

26 ¾"



VB243518BFH, VB243518SFH


VB12, VB1235, VCD24DR/L, VCD2435DR/L, VSB42 -2D, VSB4235 -2D

VB15, VB1535, VB4835FH, VB60FH, VCD30DR/L, VCD3035DR/L, VSB48 -2D, VSB4835 -2D, VSB60 -2D, VSB6035 -2D

VB18, VB18FH, VB1835, VB1835FH, VB48FH, VB4835FH, VCD36DR/L, VCD3635DR/L, VCD42, VCD4235, VCD48, VCD4835, VLC1884, VLC1890, VLC1896, VSB36 -2D, VSB3635 -2D, VSB42 -2D, VSB4235 -2D, VSB48 -2D, VSB4835 -2D

VB21, VB2135, VB21FH, VB2135FH, VB42FH, VB4235FH, VSB42, VSB4235

VB2435, VB2435B, VB2435BFH, VB24SFH, VB2435SFH, VLC2484, VLC2484B, VLC2490, VLC2496, VSB2435B



B12, B12FH, SB12

B15, B15FH, SB15

B18, B18FH, SB18, U188424, U189024, U189624

B21, B21FH, B42, B42FH, SB21, SB42

B24, B24B, B24FH, B24BFH, PBBC24/27, PBBC24/27B, B48, B48FH, SB24, SB24B, SB24FH, SB24BFH, SB48, U248424, U249024, U249624


30B, B30BFH, SB30B, SB30BFH, U308424B, U309024B, U309624B

BBC42/45, SB33,



B39, B39FH, BBC45/48, SB39

B45, B45FH, BBC48/51

32 ¾"

Spec book

Decorative Enhancem

ents

J1Supports and Valances

Supports and ValancesConstruction Options and Modifications



A CTSB

Countertop Support Bracket

A CTSB

• Solid wood• Vertical wood grain• For use as additional shelf or countertop

support• Available in all finishes• Chiffon, Cotton and White are solid

Maple with painted finish• Includes 2 recessed metal keyhole brackets installed on

backside• Mounting hardware included• Two per carton

+ HW @P + MP @P + RO @P + TH @P

9"

9"

1"

Valance Traditional

A 48” Long V48T 72” Long V72T 96” Long V96T

• Solid wood• For use between wall cabinets over

windows as a panel to conceal light fixtures

• Front and back sides are finished • Profiled edge• Chiffon, Cotton and White are solid

Maple with painted finish• Backside not intended to be viewed• Available in all finishes• Maple Accent Glaze has one accent line (AL) on front

profile• One per carton• Note: White has no profiled edges for a more

contemporary look. Not shown

+ HW @P + MP @P + RO @P + TH @P

48˝ 72˝ 96˝4 ¼˝

AL

90°

¾˝

Spec book

Dec

orat

ive

Enha

ncem

ents

J2 Moldings

MoldingsConstruction Options and Modifications



A ICM8

Corner Molding

A Inside Corner Molding

ICM8

Outside Corner Molding OSC8

• Solid wood• Available in all finishes in Oak and

Maple including Chiffon, Cotton and White

• Not available in Maple Accent Glaze• Chiffon, Cotton and White are painted

Maple • Backs not finished• Molding will be solid wood and match the colors of

hardwood, maple and oak finishes• Offered in individual 8’ lengths

+ HW @P + MP @P + RO @P + TH @P

¾˝

¾˝

ICM8

1˝

¼˝

¼˝

1˝

OSC8

Countertop Molding - Decorative Edge

A CTD8

• Solid wood• Backs not finished• Available in all finishes• Used as countertop nosing• Can be used under wall cabinets to

conceal light fixtures• Maple Accent Glaze has one accent line

(AL) on front profile• Chiffon, Chiffon with glaze, Cotton, Cotton with glaze and

White are painted Maple• Molding will be solid wood and match the colors of


HW @P + MP @P + RO @P + TH @P

AL

¾˝

/˝

/˝

1 ½˝

Spec book

Decorative Enhancem

ents

J3Moldings

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . ICM8

1 ½˝

2 ¼˝

AL

Angle Crown Molding

A ACM8

• Solid wood• Installs directly to top of cabinet• Allow sufficient space between top

of cabinet and soffit or ceiling to accommodate molding

• Chiffon and Cotton are painted Maple• Available in all finishes, except Maple

Accent Glaze shipped standard finish and white finish

• For use with traditional or full overlay door styles• Molding will be solid wood and match the colors of



¾˝

¾˝

3 /˝ 1 /˝

/˝

2 /˝ 33°

Classic Crown Molding

A 8’ length CCM8 10’ length CCM-SW10

• Solid wood• Available in all finishes• Backs not finished• Allow sufficient space between top


• Includes recess for the application of Single Bead Trim Molding (SBT8)

• Maple Accent Glaze has one accent line (AL) on front profile

• Chiffon, Chiffon with glaze, Cotton, Cotton with glaze and White are painted Maple

• Molding will be solid wood and match the colors of hardwood, maple and oak finishes

• Offered in individual 8’ or 10’ lengths

+ HW @P + MP @P + RO @P + TH @PAL

2 /˝

2 /˝

Classic CrownMolding

Ceiling

WallCabinet

Crown Molding

A 8’ length CM8 10’ length CM-SW10






• Offered in individual 8’ or 10’ lengths

+ HW @P + MP @P + RO @P + TH @P

Contemporary Crown Molding

A CTC8



• Maple Glaze has two accent lines (AL) on front profile



• Offered in individual 8’ lengths

+ HW @P + MP @P + RO @P + TH @P

2 /˝

2 /˝

AL

AL

Crown MoldilngWallCabinet

Ceiling

Spec book

Dec

orat

ive

Enha

ncem

ents

J4 Moldings


Soffit Crown Molding

A SCM8







+ HW @P + MP @P + RO @P + TH @P

AL

1 /˝

1 /˝

Traditional Furniture Base

A TFB8

• Solid wood• Backs not finished• Available in all finishes; Maple Accent


Maple • Molding will be solid wood and match

the colors of hardwood, maple and oak finishes• Offered in individual 8’ lengths

+ HW @P + MP @P + RO @P + TH @P

¾˝

Radius /˝

4 /˝

¾˝

Inset Light Rail

A ILR8

• Solid wood• Can be used under wall cabinets to

conceal light fixtures• Includes a 1 13/16” wide flat recess so

that it can be combined with other 3/4” wide decorative moldings

• All surfaces finished• Available in all finishes; Maple Accent Glaze shipped

standard finish• Chiffon, Cotton and White are painted Maple • Molding will be solid wood and match the colors of


+ HW @P + MP @P + RO @P + TH @P

¾˝

¾˝

/˝

1 /˝ 1/˝

/˝

/˝

/˝

¾˝

1 /˝

/˝

1 /˝

/˝

InsetLight Rail

WallCabinet

Narrow Batten Molding

A NBM8

• Solid wood• Backs not finished• Available in all finishes, except Maple

Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted

Maple • Molding will be solid wood and match

the colors of hardwood, maple and oak finishes• Offered in individual 8’ lengths

+ HW @P + MP @P + RO @P + TH @P

Radius /˝

Radius /˝

¼˝

¾˝

Spec book

Decorative Enhancem

ents

J5Moldings


Quarter Round Molding

A QR8

• Solid wood• Can be used to trim between toe kick

and floor• Backs not finished• Available in all finishes; Maple Accent


Maple • Molding may be shipped with the back corner mitered off• Molding will be solid wood and match the colors of


+ HW @P + MP @P + RO @P + TH @PRadius /˝

/˝

/˝

Scribe Molding

A Scribe Molding

SM8

Wide Scribe Molding WSM8

• Solid wood• Available in all finishes in Hardwood,

Maple and Oak; Maple Accent Glaze shipped standard finish

• Chiffon, Cotton and White are painted Maple or Poplar

• SM8 not finished on 1/4” bottom or 3/4” backside

• WSM8 not finished on back side• Molding will be solid wood and match the colors of


+ HW @P + MP @P + RO @P + TH @P¾˝

Radius ¼˝

¼˝ SM8Radius /˝

¼˝

1 ½˝

WSM8

Shoe Molding

A SHO8

• Solid wood• Used as inside corner molding or trim

between toekick and floor• Backs not finished• Available in all finishes; Maple Accent


Maple • Molding will be solid wood and match the colors of


+ HW @P + MP @P + RO @P + TH @P

Radius ½˝

/˝

½˝

Spec book

Dec

orat

ive

Enha

ncem

ents

J6 Moldings


Single Bead Trim

A SBT8

• Solid wood• Available in all finishes; Maple Accent


Maple • Backs not finished• Used to trim the front edge of panels.

Can also be combined with Classic Crown Molding (CCM8) and Inset Light Rail (ILR8)

• Used to trim the front edge of panels• Offered in individual 8’ lengths

+ HW @P + MP @P + RO @P + TH @P

¾˝

½˝

Solid Wood Stock

A SWS8 96” (8 ft.)

• 3/4” thick solid wood• Grain direction runs lengthwise• Can be used for valance, filler, shelf

or other matching finish, cut -to -size applications

• Finished on both sides and both long edges

• Chiffon, Cotton and White are painted Maple • Molding will be solid wood and match the colors of

hardwood, maple and oak finishes• One per carton• Offered in individual 8’ lengths

+ HW @P + MP @P + RO @P + TH @P

6˝ 96˝¾˝

Large Starter Molding

A LSTR8

• Solid wood• Used at top of wall and tall cabinets to

allow attachment of crown molding or as a filler between cabinet and ceiling/soffit

• Shipped in one piece• Backs not finished• Available in all finishes, except Maple

Accent Glaze shipped standard finish• Chiffon, Cotton and White are painted Maple • Molding will be solid wood and match the colors of


+ HW @P + MP @P + RO @P + TH @P

¾˝

¾˝

3˝

6˝

/˝ Radius/˝ Radius

CrownMolding

StarterMolding

StarterMolding

WallCabinet

WallCabinet

Ceiling/Soffit

Spec book

Decorative Enhancem

ents

J7Moldings


Toekick Cover - Laminate

A TKCL8

• 4 7/16” high x 96” long x 1/8” thick MDF (Medium Density Fiberboard)

• Matching easy clean laminate on one side

• Grain direction runs lengthwise (when applicable)

• For Toffee with Java Glaze, use Maple Toffee



+ HW @P + MP @P + RO @P + TH @P

96˝

4 /˝

⅛˝ thick MDF medium density fiberboard

Toekick Cover - Veneer

A TKCV8

• 4 7/16” high x 96” long x 1/8” thick MDF (Medium Density Fiberboard)

• Matching wood veneer plywood finished on one side, grain direction runs lengthwise


• Chiffon and Cotton glazes are shipped as standard finish

• Not available in white • Offered in individual 8’ lengths


96˝

4 /˝

⁄˝ thick plywood

Under Cabinet Molding

A UCM8

• Solid wood• Can be used under wall cabinets to

conceal light fixtures• Can be used for full or traditional overlay

applications• Profile complements most door styles• All surfaces finished• Available in all finishes• Maple Accent Glaze has one accent line (AL) on front

profile• Chiffon, Chiffon with glaze, Cotton, Cotton with glaze and

White are painted Maple• Can be combined with Panel Backer (PB) or Wall End

Panel (WEP) to create a flush color -matched underside• Molding will be solid wood and match the colors of


+ HW @P + MP @P + RO @P + TH @P

¼˝

2 /˝

¾˝AL

½˝

WallCabinet Under Cabinet

Molding

Panel Backer (PB)

Spec bookJ8 Hardware - Knobs

Dec

orat

ive

Enha

ncem

ents

Hardware - Knobs

White Ceramic Knob

A HK02 HK02-100

Satin Nickel Rope Knob

A HK107 HK107-100

Solid Bright Brass Knob

A HK108 HK108-100

Satin Nickel Knob

A HK109 HK109-100

Black Nickel Knob

A HK110 HK110-100

Bright Chrome Knob

A HK111 HK111-100

Satin Aluminum Knob

A HK117 HK117-100

Antique Iron Knob

A HK119 HK119-100

Satin Nickel Knob

A HK120 HK120-100

Antique Pewter Braided Knob

A HK123 HK123-100

Copper-Pewter Knob

A HK125 HK125-100

Rusty Flower Knob

A HK126 HK126-100

Dusty Copper Flower Knob

A HK127 HK127-100

Antique Pewter Flower Knob

A HK128 HK128-100

Satin Nickel Knob

A HK137 HK137-100

A HK02-100

Spec book J9Hardware - Knobs

Decorative Enhancem

ents Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . HK02-100

Satin Nickel Football Shaped Knob

A HK138 HK138-100

Brushed Satin Pewter French Tassel Round Knob

A HK150 HK150-100

Black Ceramic Insert Round Knob

A HK152 HK152-100

Tumbled Dark Gunmetal Round Knob

A HK155 HK155-100

Oil Rubbed Bronze Round Knob

A HK157 HK157-100

Satin Nickel Diminishing Knob

A HK158 HK158-100

1 /˝

Ochre Finished Ceramic Totem Knob

A HK161 HK161-100

Venetian Bronze Copper French Lace Knob

A HK162 HK162-100

Spec book

2 /˝

J10 Hardware - Pulls

Dec

orat

ive

Enha

ncem

ents

Hardware - Pulls

Satin Nickel Suitcase Pull

A HP103 HP103-100

3 /˝

Satin Nickel Rope Pull

A HP106 HP106-100

3 /˝

Satin Aluminum Boat Cleat Transitional Pull

A HP112 HP112-100

3 /˝

Satin Nickel Traditional Pull

A HP118 HP118-100

3˝

Antique Pewter Braided Pull

A HP124 HP124-100

5 /˝

Satin Nickel Wire Cable Pull

A HP131 HP131-100

5 /˝

Satin Nickel Canoe Pull

A HP135 HP135-100

3 /˝

Satin Nickel Fusilli Pull

A HP139 HP139-100

3 /˝

White Fusilli Pull

A HP140 HP140-100

3 /˝

Brushed Satin Pewter French Tassel Pull

A HP151 HP151-100

3˝

Black Ceramic Insert Pull

A HP153 HP153-100

3˝

Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull

A HP154 HP154-100

Oil Rubbed Bronze Cup Pull

A HP156 HP156-100

2 /˝ and 3˝

Satin Nickel Wavy Pull

A HP159 HP159-100

5 /˝

Ochre Finished Ceramic Totem Pull

A HP160 HP160-100

3 /˝

A HP103-100

Spec book J11Hardware - Pulls

Decorative Enhancem

ents Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . HP103-100

Chrome Traditional Pull

A HP163 HP163-100

3 /˝

Satin Nickel Traditional Pull

A HP164 HP164-100

3 /˝

Bright Brass Traditional Pull

A HP165 HP165-100

3 /˝

Black Nickel Traditional Pull

A HP166 HP166-100

3 /˝

Dec

orat

ive

Enha

ncem

ents

J12 Hardware - Pulls

Notes

Spec book

Spec book

Replacement Parts

K1Touch Up Materials

Touch Up Materials

A CCK

Cabinet Care Kit

A CCK

• One 8 oz. squeeze bottle of concentrated wood cleaner• One 8 oz. squeeze bottle of cabinet/furniture polish and

restorer• Two 13” x 12” cleaning and polishing cloths• One 17” x 13” dusting cloth

Cabinet Care Kit

Polish Cleaner

Cabinet Cleaning and Polishing Cloths

A CCPC

• 13” x 12” cleaning and polishing cloths• 25 per carton• Drop ship program

Cabinet Dusting Cloths

A CDC

• Treated to pick up and hold dust within cloth• Six per carton• Drop ship program

17˝

13˝

Fill Stick

A FS

• Matching putty crayon• Available in all finishes• One per carton

Spec book

Repl

acem

ent P

arts

K2 Touch Up Materials

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . CCK

Touch Up Kit

A TUK

• Available in all finishes• Used for final touch up and detailing• Kit includes Touch Up Pen (TP), Fill Stick (FS), a bottle of

touch up topcoat and a plastic storage case• One per carton

Touch Up Pen

A TP

• Felt tip marker with matching stain • Available in all finishes• One per carton

Touch Up Spray Can Primer

A TSCP

• Used as part of the process for final touch up of White, Cotton and Chiffon finishes only

• For use with Touch Up Spray Can Topcoat (TSCT)• 13 oz. aerosol spray can • One per carton• Drop ship program

Touch Up Spray Can Topcoat

A TSCT

• Touch up topcoat paint for White, Cotton or Chiffon finishes

• For use with Touch Up Spray Can Primer (TSCP)• 13 oz. aerosol spray can • One per carton• Drop ship program

Touch Up Quart

A Quart Stain QST Quart Paint QP Quart Glaze QGL Quart Clear Sealer/Topcoat QCST

• Matching stain, paint, glaze and clear sealer/topcoat• Available in quarts only• Direct ship program

Quart

Spec book

Replacement Parts

K3Touch Up Materials

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . CCK

Stain, Glaze and Paint Direct Ship Information

Items Needed to Reproduce

Glaze Finishes

Items Needed to Reproduce Accent Glaze Finishes

Chiffon with Desert Glaze - Chiffon Paint - Medium Brown Glaze - Clear Sealer/Topcoat Chiffon with Tuscan Glaze - Chiffon Paint - Light Gray Glaze - Clear Sealer/Topcoat Cotton with Tuscan Glaze - Cotton Paint - Light Gray Glaze - Clear Sealer/Topcoat Sable with Ebony Glaze - Maple Sable Stain - Charcoal Glaze - Clear Sealer/Topcoat Toffee with Java Glaze - Maple Toffee Stain - Dark Brown Glaze - Clear Sealer/Topcoat

Chiffon with Desert Accent Glaze - Chiffon Paint - Medium Brown Glaze Marker - Clear Sealer/Topcoat Chiffon with Tuscan Accent Glaze - Chiffon Paint - Light Gray Glaze Marker - Clear Sealer/Topcoat Cotton with Tuscan Accent Glaze - Cotton Paint - Light Gray Glaze Marker - Clear Sealer/Topcoat Sable with Ebony Accent Glaze - Maple Sable Stain - Charcoal (black) Glaze Marker - Clear Sealer/Topcoat Sedona with Ebony Accent Glaze - Maple Sedona Stain - Charcoal (black) Glaze Marker - Clear Sealer/Topcoat Toffee with Java Accent Glaze - Toffee Sable Stain - Sienna (dark brown) Glaze Marker - Clear Sealer/Topcoat

�is listing represents the matching stain, paint and glaze, as well as clear sealer/topcoat needed to reproduce our finishes.

Available in quarts only. �e stains are a “two-step” process, requiring first the application of the hand-wipe stain, followed by the application of the clear sealer/topcoat. Instructions and safety data sheets are packaged with each can of stain or clear sealer/topcoat.

Each stain has been developed for a specific wood specie, and is listed within the stain name, i.e., Maple Toffee. If a stain is applied to a wood specie other than it was originally formulated for the color can be expected to have a different appearance.

For optimum in-field color matches, it is recommended that the clear sealer/topcoat be applied following stain application.

�ere is no warranty on stains or items stained outside our facilities.

Important Note:

�e clear sealer/topcoat includes UV inhibitors. Not all sealers/topcoats are clear, and using a formula from another source could alter the appearance and color of the wood.

Spec book

Repl

acem

ent P

arts

K4 Sales Doors

Sales Doors

A SLDO14.75X11.25

Door and Frame Assembly Sales Samples

A ACCESSDFAVB12 ACCESSDFAB15

• Available in all door styles• Fits on carousels• Door and drawer front sizes vary depending on full or

partial overlay• ACCESSDFAVB12 is the face frame/door/drawer front

from a VB12 vanity cabinet• ACCESSDFAB15 is the face frame/door/drawer front from

a B15 base cabinet

12˝

27˝

VB12

15˝

30˝

B15

Sales Door

A SLDO14.75X11.25

• Available in all door styles, species and finishes• Includes door only

14.75˝

11.25˝

Spec book

Replacement Parts

K5Accessories

Accessories

A HTK-U

Hardware Template Kit Universal

A HTK-U

• Handy drill jig for universal hardware drilling• High-impact grey polycarbonate template with hardened

steel drill bushings • Adjustable for use with all drawers and doors• One per carton

SoftAction™ Door Hardware

A SADO

• Soft-closing technology provides smooth and silent closure of door

• One required per door; U, VLC and UF cabinets require two

• Mounting hardware included• One per carton• Note: Requires field installation

Partial overlay spacer and screws

Spec book

Repl

acem

ent P

arts

K6 Replacement Parts

Replacement Parts

A GDEUMFESAL18

3/4 Extension Side Mount Roller Guide Kit

A GDESM18KIT GDESM21KIT GDESM24KIT

• 75 pound capacity• White epoxy coated steel• Kit includes left and right guides and mounting hardware• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• One kit per carton

3/4 Extension Side Mount Roller Guide Peninsula Base Kit

A GDESMPB24KIT

• 75 pound capacity• White epoxy coated steel• Kit includes left and right guides and mounting hardware• Used on Peninsula Base (PB) cabinets• One kit per carton

3/4 Extension Side Mount Roller Guides

A Inner Left GDESMIL18 GDESMIL21 GDESMIL24 Inner Right GDESMIR18 GDESMIR21 GDESMIR24 Outer Left GDESMOL18 GDESMOL21 GDESMOL24 Outer Right GDESMOR18 GDESMOR21 GDESMOR24

• 75 pound capacity• White epoxy coated steel• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• One per carton

Inner left guide shown

Outer left guide shown

Spec book

Replacement Parts

K7Replacement Parts

Q P O N M L K J I H MR5 . HW . S . KONON . N . NNNN . SST . S . C . GDEUMFESAL18

Full Extension Side Mount Ball Bearing Guide Kit

A 24” Deep GDEFESMBB24KIT

• 75 pound capacity• Full extension guide, pulls out past the face frame• Kit includes left and right guides and mounting hardware• One kit per carton

Full Extension Side Mount Ball Bearing Guides

A GDEFESMBBIL24 GDEFESMBBIR24 GDEFESMBBO24

• 75 pound capacity• Full extension guide, pulls out past the face frame• One per carton

Inner right guide shown

Outer Right guide shown

Full Extension Under Mount SoftAction™ Guide Kit

A GDEUMFESA18KIT GDEUMFESA21KIT GDEUMFESA24KIT

• 75 pound capacity• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Kit includes left and right guides and mounting hardware• Used on cabinets in SDT construction• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• One kit per carton

Full Extension Under Mount Soft Action+™ Peninsula Base Guide Kit

A GDEUMFESAPB24KIT

• 75 pound capacity• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Used on cabinets in SDT construction• 24 deep used on 24” deep cabinets• One kit per carton

Spec book

Repl

acem

ent P

arts



Full Extension Under Mount Soft Action+™ Guides

A Left GDEUMFESAL18 GDEUMFESAL21 GDEUMFESAL24 Right GDEUMFESAR18 GDEUMFESAR21 GDEUMFESAR24

• 75 pound capacity• Full extension guide, pulls out past the face frame• Integrated SoftAction™ closing mechanism• Used on cabinets in SDT construction• 18 deep used on 18” deep cabinets• 21 deep used on 21” deep cabinets• 24 deep used on 24” deep cabinets• One kit per carton

left guide shown

Locking Device - Full Extension Under Mount Soft Action+™ Guides

A LKDVUMFESAGDEL LKDVUMFESAGDER

• LKDVUMFESAGDEL attaches under left front corner of drawer core

• LKDVUMFESAGDER attaches under right front corner of drawer core

• Used on cabinets in SDT construction• One per carton

left shown

Right shown

Rear Mounting Bracket - 3/4 Extension Side Mount Roller Guides

A RMBSMGDE

• Attaches using the guide holes in the back of the cabinet• For use with 3/4 Extension Side Mount Roller Guides• One per carton

Rear Mounting Bracket - 3/4 Extension Side Mount Roller Guides Peninsula Base

A RMBSMGDEPB RMBSMGDEPB-2

• Attaches to back frame of cabinet using a screw• For use with Peninsula Base cabinets with 3/4 Extension

Side Mount Roller Guides• Offered individually or quantities of 2

Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides

A RMBUMFESAGDE-2

• Attaches using the guide holes in the back of the cabinet• Used on cabinets in SDT construction• Two per carton

Spec book

Replacement Parts

K9Replacement Parts


Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides Peninsula Base

A RMBUMFESAGDEPB-2

• Attaches to back frame of cabinet using a screw• Used on cabinets in SDT construction• Two per carton

Rear Mounting Bracket - Full Extension Under Mount Soft Action+™ Guides DKD

A RMBUMFESAGDEDKDSET

• Attaches using the guide holes in the back of the cabinet• Used on Desk Knee Drawer (DKD) in SDT construction• Includes a left and right rear mounting bracket• One set per carton

Rear Mounting Bracket - Full Extension Side Mount Ball Bearing Guides

A RMBFESMBBGDE

• Attaches using the guide holes in the back of the cabinet• One per carton

170 Degree Hinge

A HIN170FRM-1CT

• Nickel plated finish• Includes hinge and mounting plate• Used on Traditional and Full Overlay Base Corner

Revolving (BCR) and Base Corner Fixed Shelf (BCFS) • One per carton

Bi-Fold Hinge

A HINBIFOLD-1CT

• Nickel plated finish• Includes hinge and mounting plate• Used on Traditional and Full Overlay Base Corner

Revolving (BCR) and Base Corner Fixed Shelf (BCFS) • One per carton

Spec book

Repl

acem

ent P

arts



Face Mount Hinge

A HINFM-1PR

• Nickel plated finish• Used on Traditional and Full Overlay Oven Cabinet

Universal (OCU) cabinets• Used on Traditional and Full Overlay Cotton, Chiffon and

White Oven Cabinet Single (OCS) cabinets• Offered as a pair

Full Overlay 4 Way Hinge

A HINFOL4WY-1PR

• Nickel plated finish• 4 way door adjustment• Includes hinges and mounting screws• Used on Full Overlay cabinets• Offered as a pair

Full Overlay 6 Way Hinge

A HINFOL6WY-1PR

• Nickel plated finish• 6 way door adjustment• Includes hinges and mounting screws• Used on Full Overlay cabinets

Traditional Overlay 2 Way Hinge

A HINTOL2WY-1PR

• Nickel plated finish• 2 way door adjustment• Includes hinges and mounting screws• Used on Traditional Overlay cabinets• Offered as a pair

Traditional Overlay 6 Way Hinge

A HINTOL6WY-1PR

• Nickel plated finish• 6 way door adjustment• Includes hinges and mounting screws• Used on Traditional Overlay cabinets• Offered as a pair

Spec book

Replacement Parts

K11Replacement Parts


Medicine Cabinet Pack Hinge

A HINMCPK

• Nickel plated finish• Includes upper and lower hinge, bushings and mounting

screws• Used on Medicine Cabinet (MC) and Tri-View Medicine

Cabinet (TVMC) cabinets• Offered as a pair

Utility Tray Hinge

A HINTOST-1PR

• Nickel plated finish• Includes left/right hinges and mounting screws• Used on Sink Base w/Utility Tray cabinets and Utility Tray

Kits• Offered as a pair

3/4” Shelf Clip

A SHCLP34

• Clear plastic locking clip• One per carton

3/4” Shelf Clip with Stop

A Left SHCLPLK34L Right SHCLPLK34R

• Clear plastic locking clip with front edge restraint• Used for base cabinets with Half Depth Shelf Option• One per carton

Left Clip Shown

Shelf Support Back Pack

A SHSUPBPK

• Clear plastic shelf support back• Includes 2 supports and 2 screws per pack• Used to support the back edge of shelf, attaches to back

of cabinet with a screw• One per carton

Spec book

Repl

acem

ent P

arts



Shelf Support Center

A SHSUPC

• Clear plastic center shelf support• Used to support the front edge of shelf, insert into hole in

back of frame center stile• One per carton

Shelf Support Pack

A SHSUPPK

• Clear plastic shelf support/center shelf support• Includes 5 supports and 2 center shelf support• Used in Bookcase (BK) cabinets• One per carton

Vent Clip Pack

A VNTCLPPK

• Used to attach false drawer fronts on sink base and select vanity cabinets

• Includes 2 clips, 2 post and mounting screws per pack• One per carton

Replacement Parts

K13

This guide shows which cabinet a replacement door and drawer front is available and what sku should be used to order with. This section is divided into two parts.

I. Part Index This part lists all cabinets alphabetically by the nomenclature and tells you the corresponding replacement doors and drawer fronts used on that cabinet.

II. Sizes This part lists all replacement doors and drawer fronts by their nomenclature.

How to Use This Section

Accessory Non-Drilled Door Information (ANDO)

Accessory non-drilled doors are not prepared for hinges. Accessory non-drilled doors are shipped with pliable bumpers at-tached.

Accessory non-drilled doors and drawer fronts are coded for easy reference. The prefix indicates door and usage. The first two digits indicate nominal width and the second two digits indicate nominal height.

Replacement Door and Drawer Front Information (RDO and RDF)

Replacement doors are prepared for hinges. Replacement doors and drawer fronts are shipped with pliable bumpers at-tached.

Replacement doors and drawer fronts are coded for easy reference. The prefix indicates door or drawer and usage. For re-placement doors the first two digits indicate nominal width and the second two digits indicate nominal height. For replace-ment drawer fronts the first two digits indicate nominal height and second two digits indicate nominal width.

Replacement Packaged Drawer Core Information (PKDC)

Replacement packaged drawer cores include the drawer core only. No guide hardware or attachment screws are included, but are available to order separately. Replacement packaged drawer cores are available in standard engineered wood con-struction (SST) and solid wood dovetail construction (SDT).

Replacement packaged drawer cores are coded for easy reference. The prefix indicates replacement packaged drawer core. The first part of the dimension (ex. 3.88) indicates nominal height, second dimension (ex. 14.00) indicates nominal width and the last dimension (ex. 21.69) indicates nominal length.

ANDO 18 30

Prefix Nominal Nominal code Width Height

RDF 18 STD


RDO 18 30


PKDC 3.88X14.00X21.69

Prefix Nomial Height

Nomial Width

Nomial Length

How to Use This Section Spec book

Repl

acem

ent P

arts

Pre

fix C

odes

K14

Accessory Non-Drilled Door specific prefix codes are as follows:

ANDOBCR33 Accessory non-drilled door for Base Corner Revolving 33ANDOBCR36 Accessory non-drilled door for Base Corner Revolving 36ANDOMTEP1218 Accessory non-drilled door for Matching Tall End Panel 1284 top doorANDOMTEP12TALL Accessory non-drilled door for Matching Tall End Panel 12 wide tall bottom doorANDOMTEP21TALL Accessory non-drilled door for Matching Tall End Panel 21 wide tall bottom doorANDOSBC60-VCD/VSB6035 Accessory non-drilled door for Sink Base Combination 60 - Vanity Combination Drawer/Vanity Sink Base 6035ANDOBCR36 Accessory non-drilled door for Base Corner Revolving 36ANDOVB60FH Accessory non-drilled door for Vanity Base 60 Full HeightANDOVCD/VSB60 Accessory non-drilled door for Vanity Combination Drawer/Vanity Sink Base 60ANDOVSB6035-4D Accessory non-drilled door for Vanity Sink Base Double Bowl 6035 - 4DANDOVSB60-3D Accessory non-drilled door for Vanity Sink Base Double Bowl 60 - 3D

Replacement Door specific prefix codes are as follows: RDOBCR33 Replacement door for Base Corner Revolving 33 RDOBCR36 Replacement door for Base Corner Revolving 36 RDOBLS Replacement door for Base Lazy Susan RDOVB60FH Replacement door for Vanity Base 60 Full Height RDOVCD/VSB60 Replacement door for Vanity Combination Drawer/Vanity Sink Base 60 RDOSBC60-VCD/ Replacement door for Sink Base Combina tion 60 - VSB6035 Vanity Combination Drawer/Vanity Sink Base 6035 RDOVSB6035-4D Replacement door for Vanity Sink Base Double Bowl 6035 - 4D RDOVSB60-3D Replacement door for Vanity Sink Base Double Bowl 60 - 3D

Replacement Door suffix codes are as follows: BWBT Base Wastebasket Top Mount L Left hinged R Right hinged BL Butt door left hinged BR Butt door right hinged TALLL Tall door left hinged TALLR Tall door right hinged TALLB Tall door - butt door

ANDO Accessory Non-Drilled Door RDF Replacement Drawer Front RDO Replacement Door PKDC Replacement Packaged Drawer Core

Prefix Codes

Replacement Drawer Front suffix codes are as follows: DKD 3.500 or 4.125 front height STD 5.500 or 6.125 front height STDUT 5.500 or 6.125 front height with Utility Tray drilling DP1 9.000 or 9.750 front height DP2 10.375 or 11.188 front height

How to Use This SectionSpec book

Traditional Overlay Full OverlayCabinet Qty Door Code Qty Door Code


B12 1 RDF12STD 1 RDF12STD 1 RDO1224 1 RDO1224B1212FH 1 RDO1230 1 RDO1230B12FH 1 RDO1230 1 RDO1230B15 1 RDF15STD 1 RDF15STD 1 RDO1524 1 RDO1524B1512FH 1 RDO1530 1 RDO1530B15FH 1 RDO1530 1 RDO1530B18 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824B1812FH 1 RDO1830 1 RDO1830B18FH 1 RDO1830 1 RDO1830B21 1 RDF21STD 1 RDF21STD 1 RDO2124 1 RDO2124B2112FH 1 RDO2130 1 RDO2130B21FH 1 RDO2130 1 RDO2130B24 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424B2412BFH 2 RDO2430B 2 RDO2430BB2412FH 1 RDO2430 1 RDO2430B24B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BB24BFH 2 RDO2430B 2 RDO2430BB24FH 1 RDO2430 1 RDO2430B2712BFH 2 RDO2730B 2 RDO2730BB27B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BB27BFH 2 RDO2730B 2 RDO2730BB3012BFH 2 RDO3030B 2 RDO3030BB30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BB30BFH 2 RDO3030B 2 RDO3030BB33B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BB33BFH 2 RDO3330B 2 RDO3330BB36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BB36BFH 2 RDO3630B 2 RDO3630BB39 1 RDF39STD 1 RDF39STD 2 RDO3924 2 RDO3924B39FH 2 RDO3930 2 RDO3930B42 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124B42FH 2 RDO2130 2 RDO2130B45 2 RDF45STD 2 RDF45STD 2 RDO4524 2 RDO4524B45FH 2 RDO4530 2 RDO4530B48 2 RDF24STD 2 RDF24STD 2 RDO2424 2 RDO2424B48FH 2 RDO2430 2 RDO2430B9FH 1 RDO930 1 RDO930BBC39/42 BR or BL 1 RDF27/2STD 1 RDF27/2STD 1 RDO2724 1 RDO2724BBC42/45 BR or BL 1 RDF33/2STD 1 RDF33/2STD 1 RDO3324 1 RDO3324BBC45/48 BR or BL 1 RDFBBC45/48STD 1 RDFBBC45/48STD 1 RDO3924 1 RDO3924BBC48/51 BR or BL 1 RDF45STD 1 RDF45STD 1 RDO4524 1 RDO4524BCFS36 1 RDOBCR36 1 RDOBCR36BCR33 1 RDOBCR33 1 RDOBCR33BCR36 1 RDOBCR36 1 RDOBCR36BD12-3D 2 RDF12DP2 1 RDF12STD 1 RDF12STD 2 RDF12DP2BD12-4D 3 RDF12STD 3 RDF12STD 1 RDF12DP1 1 RDF12DP1BD15-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP2 2 RDF15DP2BD15-4D 3 RDF15STD 3 RDF15STD 1 RDF15DP1 1 RDF15DP1BD18-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP2 2 RDF18DP2BD18-4D 3 RDF18STD 3 RDF18STD 1 RDF18DP1 1 RDF18DP1BD21-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP2 2 RDF21DP2

BD21-4D 3 RDF21STD 3 RDF21STD 1 RDF21DP1 1 RDF21DP1BD24-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP2 2 RDF24DP2BD24-4D 3 RDF24STD 3 RDF24STD 1 RDF24DP1 1 RDF24DP1BD27-3D 1 RDF27STD 1 RDF27STD 2 RDF27DP2 2 RDF27DP2BD30-3D 1 RDF30STD 1 RDF30STD 2 RDF30DP2 2 RDF30DP2BD33-3D 1 RDF33STD 1 RDF33STD 2 RDF33DP2 2 RDF33DP2BD36-3D 1 RDF36STD 1 RDF36STD 2 RDF36DP2 2 RDF36DP2BLS36 1 RDOBLS N/ABWBT15 1 RDF15STD 1 RDF15STD 1 RDO1524BWBT 1 RDO1524BWBTBWBT18 1 RDF18STD 1 RDF18STD 1 RDO1824BWBT 1 RDO1824BWBTDKD30 1 RDF30DKD 1 RDF30DKDDKD36 1 RDF36DKD 1 RDF36DKDOCS3084B 2 RDO3018B 2 RDO3018B 2 RDO3024B 2 RDO3024BOCS3090B 2 RDO3024B 2 RDO3024BOCS3096B 2 RDO3030B 2 RDO3030B 2 RDO3024B 2 RDO3024BOCS3384B 2 RDO3318B 2 RDO3318B 2 RDO3324B 2 RDO3324BOCS3390B 2 RDO3324B 2 RDO3324BOCS3396B 2 RDO3330B 2 RDO3330B 2 RDO3324B 2 RDO3324BOCU3084B 1 RDF30STD 1 RDF30STD 2 RDO3018B 2 RDO3018BOCU3090B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BOCU3096B 1 RDF30STD 1 RDF30STD 2 RDO3030B 2 RDO3030BOCU3384B 1 RDF33STD 1 RDF33STD 2 RDO3318B 2 RDO3318BOCU3390B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BOCU3396B 1 RDF33STD 1 RDF33STD 2 RDO3330B 2 RDO3330BODK30 1 RDF30STD 1 RDF30STDODK33 1 RDF33STD 1 RDF33STDPB18 2 RDF18STD 2 RDF18STD 2 RDO1824 2 RDO1824PB21 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124PB24 2 RDF24STD 2 RDF24STD 2 RDO2424 2 RDO2424PB24B 2 RDF24STD 2 RDF24STD 4 RDO2424B 4 RDO2424BPB27B 2 RDF27STD 2 RDF27STD 4 RDO2724B 4 RDO2724BPB30B 2 RDF30STD 2 RDF30STD 4 RDO3024B 4 RDO3024BPB36B 2 RDF36STD 2 RDF36STD 4 RDO3624B 4 RDO3624BPBBC24/27BFDS 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BPBBC24/27FDS 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424PW1830 2 RDO1830 2 RDO1830PW2130 2 RDO2130 2 RDO2130PW2430 2 RDO2430 2 RDO2430PW2430B 4 RDO2430B 4 RDO2430BPW3018B 4 RDO3018B 4 RDO3018BPW3024B 4 RDO3024B 4 RDO3024BPW3030B 4 RDO3030B 4 RDO3030BPW3618B 4 RDO3618B 4 RDO3618BPW3624B 4 RDO3624B N/APW3630B 4 RDO3630B 4 RDO3630BPWA2430 1 RDO3330 1 RDO1530 1 RDO4530 1 RDO4530

Replacement Parts

Door & Drawer Fronts - Part Index K15Spec book

Door & Drawer Fronts - Part IndexK16



Repl

acem

ent P

arts

SB12 1 RDF12STD 1 RDF12STD 1 RDO1224 1 RDO1224SB15 1 RDF15STD 1 RDF15STD 1 RDO1524 1 RDO1524SB18 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824SB21 1 RDF21STD 1 RDF21STD 1 RDO2124 1 RDO2124SB24 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424SB24B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BSB24BFH 2 RDO2430B 2 RDO2430BSB24BUT 1 RDF24STDUT 1 RDF24STD 2 RDO2424B 2 RDO2424BSB24FH 1 RDO2430 1 RDO2430SB24UT 1 RDF24STDUT 1 RDF24STDUT 1 RDO2424 1 RDO2424SB2727B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BSB2727BUT 1 RDF27STDUT 1 RDF27STDUT 2 RDO2724B 2 RDO2724BSB27B 1 RDF27STD 1 RDF27STD 2 RDO2724B 2 RDO2724BSB27BFH 2 RDO2730B 2 RDO2730BSB27BUT 1 RDF27STDUT 1 RDF27STDUT 2 RDO2724B 2 RDO2724BSB3027B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSB3027BUT 1 RDF30STDUT 1 RDF30STDUT 2 RDO3024B 2 RDO3024BSB30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSB30B-CG 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSB30BFH 2 RDO3030B 2 RDO3030BSB30BUT 1 RDF30STDUT 1 RDF30STDUT 2 RDO3024B 2 RDO3024BSB30BUT-CG 1 RDF30STDUT 1 RDF30STDUT 2 RDO3024B 2 RDO3024BSB3327B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BSB3327BUT 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324B 2 RDO3324BSB33B 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BSB33B-CG 1 RDF33STD 1 RDF33STD 2 RDO3324B 2 RDO3324BSB33BUT 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324B 2 RDO3324BSB33BUT-CG 1 RDF33STDUT 1 RDF33STDUT 2 RDO3324B 2 RDO3324BSB3627B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSB3627BUT 1 RDF36STDUT 1 RDF36STDUT 2 RDO3624B 2 RDO3624BSB36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSB36B-CG 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSB36BFH 2 RDO3630B 2 RDO3630BSB36BUT 1 RDF36STDUT 1 RDF36STDUT 2 RDO3624B 2 RDO3624BSB36BUT-CG 1 RDF36STDUT 2 RDO3624B 2 RDO3624B 1 RDF36STDUTSB39 1 RDF39STD 1 RDF39STD 2 RDO3924 2 RDO3924SB39UT 1 RDF39STDUT 1 RDF39STDUT 2 RDO3924 2 RDO3924SB42 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124SB4227 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124SB4227UT 2 RDF21STDUT 2 RDF21STDUT 2 RDO2124 2 RDO2124SB42UT 2 RDF21STDUT 2 RDF21STDUT 2 RDO2124 2 RDO2124

SB48 2 RDF24STD 2 RDF24STD 2 RDO2424 2 RDO2424SB48UT 2 RDF24STDUT 2 RDF24STDUT 2 RDO2424 2 RDO2424SBA36 1 RDF33/2STD 1 RDF33/2STD 1 RDO3324 1 RDO3324SF24 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424SF24B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BSF24BFH 2 RDO2430B 2 RDO2430BSF24FH 1 RDO2430 1 RDO2430SF30B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024BSF30BFH 2 RDO3030B 2 RDO3030BSF36B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BSF36BFH 2 RDO3630B 2 RDO3630BU1884 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLU188424 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLU1890 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLU189024 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLU1896 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLU189624 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLU2484 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLU248424 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLU2490 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLU249024 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLU2496 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLU249624 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLU308424B 2 RDO3018B 2 RDO3018B 2 RDO30TALLB 2 RDO30TALLBU3084B 2 RDO3018B 2 RDO3018B 2 RDO30TALLB 2 RDO30TALLBU309024B 2 RDO3024B 2 RDO3024B 2 RDO30TALLB 2 RDO30TALLBU3090B 2 RDO3024B 2 RDO3024B 2 RDO30TALLB 2 RDO30TALLBU309624B 2 RDO3030B 2 RDO3030B 2 RDO30TALLB 2 RDO30TALLBU3096B 2 RDO3030B 2 RDO3030B 2 RDO30TALLB 2 RDO30TALLBUF1884 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLUF1890 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLUF1896 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLUF2484 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLUF2490 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLUF2496 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLVB12 1 RDF12STD 1 RDF12STD 1 RDO1221 1 RDO1221VB1235 1 RDF12STD 1 RDF12STD 1 RDO1224 1 RDO1224VB15 1 RDF15STD 1 RDF15STD 1 RDO1521 1 RDO1521VB1535 1 RDF15STD 1 RDF15STD 1 RDO1524 1 RDO1524VB18 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821VB1818FH 1 RDO1827 1 RDO1827

Spec book



Replacement Parts

Door & Drawer Fronts - Part Index K17

VB1835 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824VB1835FH 1 RDO1830 1 RDO1830VB18FH 1 RDO1827 1 RDO1827VB21 1 RDF21STD 1 RDF21STD 1 RDO2121 1 RDO2121VB2118FH 1 RDO2127 1 RDO2127VB2135 1 RDF21STD 1 RDF21STD 1 RDO2124 1 RDO2124VB2135FH 1 RDO2130 1 RDO2130VB21FH 1 RDO2127 1 RDO2127VB243518BFH 2 RDO2430B 2 RDO2430BVB243518SFH 1 RDO2430 1 RDO2430VB2435 1 RDF24STD 1 RDF24STD 1 RDO2424 1 RDO2424VB2435B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BVB2435BFH 2 RDO2430B 2 RDO2430BVB2435SFH 1 RDO2430 1 RDO2430VB24SFH 1 RDO2427 1 RDO2427VB303518BFH 2 RDO3030B 2 RDO3030BVB3035BFH 2 RDO3030B 2 RDO3030BVB30BFH 2 RDO3027B 2 RDO3027BVB3018BFH 2 RDO3027B 2 RDO3027BVB3618BFH 2 RDO3627B 2 RDO3627BVB363518BFH 2 RDO3630B 2 RDO3630BVB3635BFH 2 RDO3630B 2 RDO3630BVB36BFH 2 RDO3627B 2 RDO3627BVB4218FH 2 RDO2127 2 RDO2127VB4235FH 2 RDO2130 2 RDO2130VB42FH 2 RDO2127 2 RDO2127VB4818FH 2 RDO1527 2 RDO1527 1 RDO1827 1 RDO1827VB4835FH 2 RDO1530 2 RDO1530 1 RDO1830 1 RDO1830VB48FH 2 RDO1527 2 RDO1527 1 RDO1827 1 RDO1827VB6018FH 2 RDOVB60FH 2 RDOVB60FH 2 RDO1527 2 RDO1527VB60FH 2 RDOVB60FH 2 RDOVB60FH 2 RDO1527 2 RDO1527VCD24 DR or DL 1 RDF24STD 1 RDF24STD 1 RDO1221 1 RDO1221 2 RDF12DP1 2 RDF12DP1VCD2418 DR or DL 1 RDF24STD 1 RDF24STD 1 RDO1221 1 RDO1221 2 RDF12DP1 2 RDF12DP1VCD2435 DR or DL 1 RDF24STD 1 RDF24STD 1 RDO1224 1 RDO1224 2 RDF12DP1 2 RDF12DP1 1 RDF12STD 1 RDF12STDVCD30 DR or DL 1 RDF30STD 1 RDF30STD 1 RDO1521 1 RDO1521 2 RDF15DP1 2 RDF15DP1VCD3018 DR or DL 1 RDF30STD 1 RDF30STD 1 RDO1521 1 RDO1521 2 RDF15DP1 2 RDF15DP1VCD3035 DR or DL 1 RDF30STD 1 RDF30STD 1 RDO1524 1 RDO1524 1 RDF15DP1 1 RDF15DP1 2 RDF15STD 2 RDF15STDVCD36 DR or DL 1 RDF36STD 1 RDF36STD 1 RDO1821 1 RDO1821 2 RDF18DP1 2 RDF18DP1VCD3618 DR or DL 1 RDF36STD 1 RDF36STD 1 RDO1821 1 RDO1821 2 RDF18DP1 2 RDF18DP1VCD3635 DR or DL 1 RDF36STD 1 RDF36STD 1 RDO1824 1 RDO1824 1 RDF18DP1 1 RDF18DP1 2 RDF18STD 2 RDF18STDVCD42 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF12DP1 4 RDF12DP1 2 RDF12STD 2 RDF12STD

VCD4218 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF12DP1 4 RDF12DP1 2 RDF12STD 2 RDF12STDVCD4235 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824 2 RDF12DP1 2 RDF12DP1 6 RDF12STD 6 RDF12STDVCD48 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD4818 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD4835 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824 2 RDF15DP1 2 RDF15DP1 6 RDF15STD 6 RDF15STDVCD60 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDOVCD/VSB60 2 RDOVCD/VSB60 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD6018 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDOVCD/VSB60 2 RDOVCD/VSB60 4 RDF15DP1 4 RDF15DP1 2 RDF15STD 2 RDF15STDVCD6035 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDOSBC60-VCD/VSB6035 2 RDOSBC60-VCD/VSB6035 2 RDF15DP1 2 RDF15DP1 6 RDF15STD 6 RDF15STDVD12-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP1 2 RDF12DP1VD1218-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP1 2 RDF12DP1VD1235-3D 1 RDF12STD 1 RDF12STD 2 RDF12DP2 2 RDF12DP2VD15-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP1 2 RDF15DP1VD1518-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP1 2 RDF15DP1VD1535-3D 1 RDF15STD 1 RDF15STD 2 RDF15DP2 2 RDF15DP2VD18-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP1 2 RDF18DP1VD1818-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP1 2 RDF18DP1VD1835-3D 1 RDF18STD 1 RDF18STD 2 RDF18DP2 2 RDF18DP2VD21-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP1 2 RDF21DP1VD2118-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP1 2 RDF21DP1VD2135-3D 1 RDF21STD 1 RDF21STD 2 RDF21DP2 2 RDF21DP2VD24-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP1 2 RDF24DP1VD2418-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP1 2 RDF24DP1VD2435-3D 1 RDF24STD 1 RDF24STD 2 RDF24DP2 2 RDF24DP2VLC1884 1 RDO1818 1 RDO1818 1 RDO18TALL 1 RDO18TALLVLC1890 1 RDO1824 1 RDO1824 1 RDO18TALL 1 RDO18TALLVLC1896 1 RDO1830 1 RDO1830 1 RDO18TALL 1 RDO18TALLVLC2484 1 RDO2418 1 RDO2418 1 RDO24TALL 1 RDO24TALLVLC2490 1 RDO2424 1 RDO2424 1 RDO24TALL 1 RDO24TALLVLC2496 1 RDO2430 1 RDO2430 1 RDO24TALL 1 RDO24TALLVSB2435B 1 RDF24STD 1 RDF24STD 2 RDO2424B 2 RDO2424BVSB3035B 1 RDF30STD 1 RDF30STD 2 RDO3024B 2 RDO3024B

Spec book



Repl

acem

ent P

arts

Door & Drawer Fronts - Part IndexK18

VSB30B 1 RDF30STD 1 RDF30STD 2 RDO3021B 2 RDO3021BVSB36-2D 3 RDF12STD 3 RDF12STD 2 RDO1821 2 RDO1821VSB3635-2D 3 RDF12STD 3 RDF12STD 2 RDO1824 2 RDO1824VSB3635B 1 RDF36STD 1 RDF36STD 2 RDO3624B 2 RDO3624BVSB36B 1 RDF36STD 1 RDF36STD 2 RDO3621B 2 RDO3621BVSB42 2 RDF21STD 2 RDF21STD 2 RDO2121 2 RDO2121VSB42-2D 2 RDF12STD 2 RDF12STD 2 RDO1221 2 RDO1221 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821VSB4235 2 RDF21STD 2 RDF21STD 2 RDO2124 2 RDO2124VSB4235-2D 2 RDF12STD 2 RDF12STD 2 RDO1224 2 RDO1224 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824VSB48-2D 2 RDF15STD 2 RDF15STD 2 RDO1521 2 RDO1521 1 RDF18STD 1 RDF18STD 1 RDO1821 1 RDO1821VSB4835-2D 2 RDF15STD 2 RDF15STD 2 RDO1524 2 RDO1524 1 RDF18STD 1 RDF18STD 1 RDO1824 1 RDO1824VSB60-2D 2 RDF15STD 2 RDF15STD 2 RDOVCD/VSB60 2 RDOVCD/VSB60 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDO1521 2 RDO1521VSB60-3D 2 RDOVSB60-3D 2 RDOVSB60-3D 2 RDFVSB60-3DSTD 2 RDFVSB60-3DSTD 2 RDF18DP1 2 RDF18DP1 1 RDF18STD 1 RDF18STDVSB6035-2D 2 RDF15STD 2 RDF15STD 2 RDOSBC60-VCD/VSB6035 2 RDOSBC60-VCD/VSB6035 1 RDFVCD/VSB60-2DSTD 1 RDFVCD/VSB60-2DSTD 2 RDO1524 2 RDO1524VSB6035-4D 2 RDOVSB6035-4D 2 RDOVSB6035-4D 2 RDFVSB60-3DSTD 2 RDFVSB60-3DSTD 1 RDF18DP1 1 RDF18DP1 3 RDF18STD 3 RDF18STDVW1530 1 RDO1530 1 RDO1530VWB2430B 2 RDO2424B 2 RDO2424BW1230 1 RDO1230 1 RDO1230W1236 1 RDO1236 1 RDO1236W1242 1 RDO1242 1 RDO1242W1530 1 RDO1530 1 RDO1530W1536 1 RDO1536 1 RDO1536W1542 1 RDO1542 1 RDO1542W1824 1 RDO1824 1 RDO1824W1830 1 RDO1830 1 RDO1830W1836 1 RDO1836 1 RDO1836W1842 1 RDO1842 1 RDO1842W2124 1 RDO2124 1 RDO2124W2130 1 RDO2130 1 RDO2130W2136 1 RDO2136 1 RDO2136W2142 1 RDO2142 1 RDO2142W2418 1 RDO2418 1 RDO2418W2424 1 RDO2424 1 RDO2424W2424B 2 RDO2424B 2 RDO2424BW2430 1 RDO2430 1 RDO2430W2430B 2 RDO2430B 2 RDO2430BW2436 1 RDO2436 1 RDO2436W2436B 2 RDO2436B 2 RDO2436BW2442 1 RDO2442 1 RDO2442W2442B 2 RDO2442B 2 RDO2442BW2730B 2 RDO2730B 2 RDO2730BW2736B 2 RDO2736B 2 RDO2736BW2742B 2 RDO2742B 2 RDO2742BW3012B 2 RDO3012B 2 RDO3012BW3015B 2 RDO3015B 2 RDO3015B

W3018B 2 RDO3018B 2 RDO3018BW3021B 2 RDO3021B 2 RDO3021BW3024B 2 RDO3024B 2 RDO3024BW3027B 2 RDO3027B 2 RDO3027BW3030B 2 RDO3030B 2 RDO3030BW3036B 2 RDO3036B 2 RDO3036BW3042B 2 RDO3042B 2 RDO3042BW3315B 2 RDO3315B 2 RDO3315BW3318B 2 RDO3318B 2 RDO3318BW3324B 2 RDO3324B 2 RDO3324BW3330B 2 RDO3330B 2 RDO3330BW3336B 2 RDO3336B 2 RDO3336BW3342B 2 RDO3342B 2 RDO3342BW3612B 2 RDO3612B 2 RDO3612BW3615B 2 RDO3615B 2 RDO3615BW3618B 2 RDO3618B 2 RDO3618BW3621B 2 RDO3621B 2 RDO3621BW3624B 2 RDO3624B 2 RDO3624BW3627B 2 RDO3627B 2 RDO3627BW3630B 2 RDO3630B 2 RDO3630BW3636B 2 RDO3636B 2 RDO3636BW3642B 2 RDO3642B 2 RDO3642BW3912 2 RDO3912 2 RDO3912W3918 2 RDO3918 2 RDO3918W3924 2 RDO3924 2 RDO3924W3930 2 RDO3930 2 RDO3930W3936 2 RDO3936 2 RDO3936W3942 2 RDO3942 2 RDO3942W4224 2 RDO2124 2 RDO2124W4230 2 RDO2130 2 RDO2130W4236 2 RDO2136 2 RDO2136W4242 2 RDO2142 2 RDO2142W4530 2 RDO4530 2 RDO4530W4830 2 RDO2430 2 RDO2430W930 1 RDO930 1 RDO930W936 1 RDO936 1 RDO936W942 1 RDO942 1 RDO942WA2430 1 RDO3330 1 RDO1530WA2436 1 RDO3336 1 RDO1536WA2442 1 RDO3342 1 RDO1542WA2730 1 RDO3330 1 RDO1530WA2736 1 RDO3336 1 RDO1536WA2742 1 RDO3342 1 RDO1542WBC30/3330 BR or BL 1 RDO3330 1 RDO3330WBC30/3336 BR or BL 1 RDO3336 1 RDO3336WBC30/3342 BR or BL 1 RDO3342 1 RDO3342WBC36/3930 BR or BL 1 RDO4530 1 RDO4530WBC48/5130 BR or BL 1 RDO3330 1 RDO3330 1 RDO1830 1 RDO1830WCA1230 1 RDO3330 1 RDO3330WCA1236 1 RDO3336 1 RDO3336WCA1242 1 RDO3342 1 RDO3342WR3012B 2 RDO3012B 2 RDO3012BWR3018B 2 RDO3018B 2 RDO3018BWR3315B 2 RDO3315B 2 RDO3315BWR3318B 2 RDO3318B 2 RDO3318BWR3612B 2 RDO3612B 2 RDO3612BWR3615B 2 RDO3615B 2 RDO3615BWR3618B 2 RDO3618B 2 RDO3618BWR3624B 2 RDO3624B 2 RDO3624BWR3912 2 RDO1812 2 RDO1812WR3918 2 RDO3918 2 RDO3918WR3924 2 RDO3924 2 RDO3924

Spec book

PART Traditional Overlay Full Overlay

RDO30TALLB 14 1/16 X 60 1/2 14 3/4 X 61 1/8

RDO24TALL 22 1/4 X 60 1/2 23 5/8 X 61 1/8

RDO18TALL 16 1/4 X 60 1/2 17 5/8 X 61 1/8

RDF39STDUT 5 1/2 X 37 1/4 N/A

RDF36STDUT 5 1/2 X 34 1/4 6 1/8 X 35 5/8

RDF33STDUT 5 1/2 X 31 1/4 6 1/8 X 32 5/8

RDF30STDUT 5 1/2 X 28 1/4 6 1/8 X 29 5/8

RDF27STDUT 5 1/2 X 25 1/4 N/A

RDF24STDUT 5 1/2 X 22 1/4 N/A

RDF21STDUT 5 1/2 X 19 1/4 N/A

RDF45STD 5 1/2 X 20 3/4 6 1/8 X 22 1/8

RDF39STD 5 1/2 X 37 1/4 6 1/8 X 38 5/8

RDF36STD 5 1/2 X 34 1/4 6 1/8 X 35 5/8

RDF33STD 5 1/2 X 31 1/4 6 1/8 X 32 5/8

RDF30STD 5 1/2 X 28 1/4 6 1/8 X 29 5/8

RDF27STD 5 1/2 X 25 1/4 6 1/8 X 26 5/8

RDF24STD 5 1/2 X 22 1/4 6 1/8 X 23 5/8

RDF21STD 5 1/2 X 19 1/4 6 1/8 X 20 5/8

RDF18STD 5 1/2 X 16 1/4 6 1/8 X 17 5/8

RDF15STD 5 1/2 X 13 1/4 6 1/8 X 14 5/8

RDF12STD 5 1/2 X 10 1/4 6 1/8 X 11 5/8

RDOVB60FH 12 5/8 X 25 14 X 26 1/4

RDF36DP2 10 3/8 X 34 1/4 11 3/16 X 35 5/8

RDF33DP2 10 3/8 X 31 1/4 11 3/16 X 32 5/8

RDF30DP2 10 3/8 X 28 1/4 11 3/16 X 29 5/8

RDF27DP2 10 3/8 X 25 1/4 11 3/16 X 26 5/8

RDF24DP2 10 3/8 X 22 1/4 11 3/16 X 23 5/8

RDF21DP2 10 3/8 X 19 1/4 11 3/16 X 20 5/8

RDF18DP2 10 3/8 X 16 1/4 11 3/16 X 17 5/8

RDF15DP2 10 3/8 X 13 1/4 11 3/16 X 14 5/8

RDF12DP2 10 3/8 X 10 1/4 11 3/16 X 11 5/8

RDF24DP1 9 X 22 1/4 9 3/4 X 23 5/8

RDF21DP1 9 X 19 1/4 9 3/4 X 20 5/8

RDF18DP1 9 X 16 1/4 9 3/4 X 17 5/8

RDF15DP1 9 X 13 1/4 9 3/4 X 14 5/8

RDF12DP1 9 X 10 1/4 9 3/4 X 11 5/8

RDF36DKD 3 1/2 X 34 1/4 4 1/8 X 35 5/8

RDF30DKD 3 1/2 X 28 1/4 4 1/8 X 29 5/8

RDOVSB6035-4D 18 5/8 X 21 1/2 20 X 22 3/4

RDO3642B 17 1/16 X 40 17 3/4 X 41 1/4

RDO3342B 15 9/16 X 40 16 1/4 X 41 1/4

RDO3042B 14 1/16 X 40 14 3/4 X 41 1/4

RDO2742B 12 9/16 X 40 13 1/4 X 41 1/4

RDO2442B 11 1/16 X 40 11 3/4 X 41 1/4

RDO942 7 1/4 X 40 8 5/8 X 41 1/4

RDO3942 17 3/4 X 40 19 1/8 X 41 1/4

RDO3342 14 3/4 X 40 16 1/8 X 41 1/4

RDO2442 22 1/4 X 40 23 5/8 X 41 1/4

RDO2142 19 1/4 X 40 20 5/8 X 41 1/4

RDO1842 16 1/4 X 40 17 5/8 X 41 1/4

RDO1542 13 1/4 X 40 14 5/8 X 41 1/4

RDO1242 10 1/4 X 40 11 5/8 X 41 1/4

RDFVSB60-3DSTD 5 1/2 X 18 5/8 6 1/8 X 20

RDOVSB60-3D 18 5/8 X 18 1/2 20 X 19 3/4

RDO3636B 17 1/16 X 34 17 3/4 X 35 1/4

RDO3336B 15 9/16 X 34 16 1/4 X 35 1/4

RDO3036B 14 1/16 X 34 14 3/4 X 35 1/4

RDO2736B 12 9/16 X 34 13 1/4 X 35 1/4

Door & Drawer Fronts - Sizes K19

Replacement Parts

Spec book


Door & Drawer Fronts - SizesK20

Repl

acem

ent P

arts

RDO2436B 11 1/16 X 34 11 3/4 X 35 1/4

RDO936 7 1/4 X 34 8 5/8 X 35 1/4

RDO3936 17 3/4 X 34 19 1/8 X 35 1/4

RDO3336 14 3/4 X 34 16 1/8 X 35 1/4

RDO2136 19 1/4 X 34 20 5/8 X 35 1/4

RDO1836 16 1/4 X 34 17 5/8 X 35 1/4

RDO1536 13 1/4 X 34 14 5/8 X 35 1/4

RDO1236 10 1/4 X 34 11 5/8 X 35 1/4

RDO3630B 17 1/16 X 28 17 3/4 X 29 1/4

RDO3330B 15 9/16 X 28 16 1/4 X 29 1/4

RDO3030B 14 1/16 X 28 14 3/4 X 29 1/4

RDO2730B 12 9/16 X 28 13 1/4 X 29 1/4

RDO2430B 11 1/16 X 28 11 3/4 X 29 1/4

RDO930 7 1/4 X 28 8 5/8 X 29 1/4

RDO4530 20 3/4 X 28 22 1/8 X 29 1/4

RDO3930 17 3/4 X 28 19 1/8 X 29 1/4

RDO3330 14 3/4 X 28 16 1/8 X 29 1/4

RDO2430 22 1/4 X 28 23 5/8 X 29 1/4

RDO2130 19 1/4 X 28 20 5/8 X 29 1/4

RDO1830 16 1/4 X 28 17 5/8 X 29 1/4

RDO1530 13 1/4 X 28 14 5/8 X 29 1/4

RDO1230 10 1/4 X 28 11 5/8 X 29 1/4

RDFVCD/VSB60-2DSTD 5 1/2 X 27 6 1/8 X 28 3/8

RDO3627B 17 1/16 X 25 17 3/4 X 26 1/4

RDO3027B 14 1/16 X 25 14 3/4 X 26 1/4

RDO2427 22 1/4 X 25 23 5/8 X 26 1/4

RDO2127 19 1/4 X 25 20 5/8 X 26 1/4

RDO1827 16 1/4 X 25 17 5/8 X 26 1/4

RDO1527 13 1/4 X 25 14 5/8 X 26 1/4

RDO1824BWBT 16 1/4 X 21 1/2 17 5/8 X 22 3/4

RDO1524BWBT 13 1/4 X 21 1/2 14 5/8 X 22 3/4

RDO3624B 17 1/16 X 21 1/2 17 3/4 X 22 3/4

RDO3324B 15 9/16 X 21 1/2 16 1/4 X 22 3/4

RDO3024B 14 1/16 X 21 1/2 14 3/4 X 22 3/4

RDO2724B 12 9/16 X 21 1/2 13 1/4 X 22 3/4

RDO2424B 11 1/16 X 21 1/2 11 3/4 X 22 3/4

RDO4524 20 3/4 X 21 1/2 22 1/8 X 22 3/4

RDO3924 17 3/4 X 21 1/2 19 1/8 X 22 3/4

RDO3324 14 3/4 X 21 1/2 16 1/8 X 22 3/4

RDO2724 11 3/4 X 21 1/2 13 1/8 X 22 3/4

RDO2424 22 1/4 X 21 1/2 23 5/8 X 22 3/4

RDO2124 19 1/4 X 21 1/2 20 5/8 X 22 3/4

RDO1824 16 1/4 X 21 1/2 17 5/8 X 22 3/4

RDO1524 13 1/4 X 21 1/2 14 5/8 X 22 3/4

RDO1224 10 1/4 X 21 1/2 11 5/8 X 22 3/4

RDO3621B 17 1/16 X 18 1/2 17 3/4 X 19 3/4

RDO3021B 14 1/16 X 18 1/2 14 3/4 X 19 3/4

RDO2121 19 1/4 X 18 1/2 20 5/8 X 19 3/4

RDO1821 16 1/4 X 18 1/2 17 5/8 X 19 3/4

RDO1521 13 1/4 X 18 1/2 14 5/8 X 19 3/4

RDO1221 10 1/4 X 18 1/2 11 5/8 X 19 3/4

RDO3618B 17 1/16 X 16 17 3/4 X 17 1/4

RDO3318B 15 9/16 X 16 16 1/4 X 17 1/4

RDO3018B 14 1/16 X 16 14 3/4 X 17 1/4

RDO3918 17 3/4 X 16 19 1/8 X 17 1/4

RDO2418 22 1/4 X 16 23 5/8 X 17 1/4

RDO1818 16 1/4 X 16 17 5/8 X 17 1/4

RDO3615B 17 1/16 X 13 17 3/4 X 14 1/4

Spec book


Replacement Parts

Door & Drawer Fronts - Sizes K21

RDO3315B 15 9/16 X 13 16 1/4 X 14 1/4

RDO3015B 14 1/16 X 13 14 3/4 X 14 1/4

RDO3612B 17 1/16 X 10 17 3/4 X 11 1/4

RDO3012B 14 1/16 X 10 14 3/4 X 11 1/4

RDO3912 17 3/4 X 10 19 1/8 X 11 1/4

RDO1812 16 1/4 X 10 17 5/8 X 11 1/4

RDOVCD/VSB60 12 5/8 X 18 1/2 14 X 19 3/4

RDOSBC60-VCD/VSB6035 12 5/8 X 21 1/2 14 X 22 3/4

RDOBLS 10 1/8 X 27 1/4 N/A

RDOBCR36 10 1/4 X 28 10 15/16 X 29 1/4

RDOBCR33 N/A 7 15/16 X 29 1/4

RDFBBC45/48STD 5 1/2 X 17 3/4 6 1/8 X 19 1/8

RDF33/2STD 5 1/2 X 14 3/4 6 1/8 X 16 1/8

RDF27/2STD 5 1/2 X 11 3/4 6 1/8 X 13 1/8

Spec book

Accessory Non-Drilled DoorsK22


ANDO1221 10 1/4 X 18 1/2 11 5/8 X 19 3/4

ANDO1224 10 1/4 X 21 1/2 11 5/8 X 22 3/4

ANDO1230 10 1/4 X 28 11 5/8 X 29 1/4

ANDO1236 10 1/4 X 34 11 5/8 X 35 1/4

ANDO1242 10 1/4 X 40 11 5/8 X 41 1/4

ANDO1521 13 1/4 X 18 1/2 14 5/8 X 19 3/4

ANDO1524 13 1/4 X 21 1/2 14 5/8 X 22 3/4

ANDO1527 13 1/4 X 25 14 5/8 X 26 1/4

ANDO1530 13 1/4 X 28 14 5/8 X 29 1/4

ANDO1536 13 1/4 X 34 14 5/8 X 35 1/4

ANDO1542 13 1/4 X 40 14 5/8 X 41 1/4

ANDO1812 16 1/4 X 10 17 5/8 X 11 1/4

ANDO1818 16 1/4 X 16 17 5/8 X 17 1/4

ANDO1821 16 1/4 X 18 1/2 17 5/8 X 19 3/4

ANDO1824 16 1/4 X 21 1/2 17 5/8 X 22 3/4

ANDO1827 16 1/4 X 25 17 5/8 X 26 1/4

ANDO1830 16 1/4 X 28 17 5/8 X 29 1/4

ANDO1836 16 1/4 X 34 17 5/8 X 35 1/4

ANDO1842 16 1/4 X 40 17 5/8 X 41 1/4

ANDO18TALL 16 1/4 X 60 1/2 17 5/8 X 61 1/8

ANDO2118 19 1/4 X 16 20 5/8 X 17 1/4

ANDO2121 19 1/4 X 18 1/2 20 5/8 X 19 3/4

ANDO2124 19 1/4 X 21 1/2 20 5/8 X 22 3/4

ANDO2127 19 1/4 X 25 20 5/8 X 26 1/4

ANDO2130 19 1/4 X 28 20 5/8 X 29 1/4

ANDO2136 19 1/4 X 34 20 5/8 X 35 1/4

ANDO2142 19 1/4 X 40 20 5/8 X 41 1/4

ANDO2418 22 1/4 X 16 23 5/8 X 17 1/4

ANDO2424B 11 1/16 X 21 1/2 11 3/4 X 22 3/4

ANDO2424 22 1/4 X 21 1/2 23 5/8 X 22 3/4

ANDO2427 22 1/4 X 25 23 5/8 X 26 1/4

ANDO2430B 11 1/16 X 28 11 3/4 X 29 1/4

ANDO2430 22 1/4 X 28 23 5/8 X 29 1/4

ANDO2436B 11 1/16 X 34 11 3/4 X 35 1/4

ANDO2436 22 1/4 X 34 23 5/8 X 35 1/4

ANDO2442B 11 1/16 X 40 11 3/4 X 41 1/4

ANDO2442 22 1/4 X 40 23 5/8 X 41 1/4

ANDO24TALL 22 1/4 X 60 1/2 23 5/8 X 61 1/8

ANDO2724 11 3/4 X 21 1/2 13 1/8 X 22 3/4

ANDO2724B 12 9/16 X 21 1/2 13 1/4 X 22 3/4

ANDO2730B 12 9/16 X 28 13 1/4 X 29 1/4

ANDO2736B 12 9/16 X 34 13 1/4 X 35 1/4

ANDO2742B 12 9/16 X 40 13 1/4 X 41 1/4

ANDO3012B 14 1/16 X 10 14 3/4 X 11 1/4

ANDO3015B 14 1/16 X 13 14 3/4 X 14 1/4

ANDO3018B 14 1/16 X 16 14 3/4 X 17 1/4

ANDO3021B 14 1/16 X 18 1/2 14 3/4 X 19 3/4

ANDO3024B 14 1/16 X 21 1/2 14 3/4 X 22 3/4

ANDO3027B 14 1/16 X 25 14 3/4 X 26 1/4

ANDO3030B 14 1/16 X 28 14 3/4 X 29 1/4

ANDO3036B 14 1/16 X 34 14 3/4 X 35 1/4

ANDO3042B 14 1/16 X 40 14 3/4 X 41 1/4

ANDO30TALLB 14 1/16 X 60 1/2 14 3/4 X 61 1/8

ANDO3315B 15 9/16 X 13 16 1/4 X 14 1/4

ANDO3318B 15 9/16 X 16 16 1/4 X 17 1/4

ANDO3324 14 3/4 X 21 1/2 16 1/8 X 22 3/4

ANDO3324B 15 9/16 X 21 1/2 16 1/4 X 22 3/4

ANDO3330B 15 9/16 X 28 16 1/4 X 29 1/4

Repl

acem

ent P

arts

Spec book

Accessory Non-Drilled Doors K23


Replacement Parts

ANDO3330 14 3/4 X 28 16 1/8 X 29 1/4

ANDO3336B 15 9/16 X 34 16 1/4 X 35 1/4

ANDO3336 14 3/4 X 34 16 1/8 X 35 1/4

ANDO3342B 15 9/16 X 40 16 1/4 X 41 1/4

ANDO3342 14 3/4 X 40 16 1/8 X 41 1/4

ANDO3612B 17 1/16 X 10 17 3/4 X 11 1/4

ANDO3615B 17 1/16 X 13 17 3/4 X 14 1/4

ANDO3618B 17 1/16 X 16 17 3/4 X 17 1/4

ANDO3621B 17 1/16 X 18 1/2 17 3/4 X 19 3/4

ANDO3624B 17 1/16 X 21 1/2 17 3/4 X 22 3/4

ANDO3627B 17 1/16 X 25 17 3/4 X 26 1/4

ANDO3630B 17 1/16 X 28 17 3/4 X 29 1/4

ANDO3636B 17 1/16 X 34 17 3/4 X 35 1/4

ANDO3642B 17 1/16 X 40 17 3/4 X 41 1/4

ANDO3912 17 3/4 X 10 19 1/8 X 11 1/4

ANDO3918 17 3/4 X 16 19 1/8 X 17 1/4

ANDO3924 17 3/4 X 21 1/2 19 1/8 X 22 3/4

ANDO3930 17 3/4 X 28 19 1/8 X 29 1/4

ANDO3936 17 3/4 X 34 19 1/8 X 35 1/4

ANDO3942 17 3/4 X 40 19 1/8 X 41 1/4

ANDO4524 20 3/4 X 21 1/2 22 1/8 X 22 3/4

ANDO4530 20 3/4 X 28 22 1/8 X 29 1/4

ANDO930 7 1/4 X 28 8 5/8 X 29 1/4

ANDO936 7 1/4 X 34 8 5/8 X 35 1/4

ANDO942 7 1/4 X 40 8 5/8 X 41 1/4

ANDOBCR33 N/A 7 15/16 X 29 1/4

ANDOBCR36 10 1/4 X 28 10 15/16 X 29 1/4

ANDOMTEP1218 10 1/4 X 16 11 3/4 X 17 1/4

ANDOMTEP12TALL 10 1/4 X 60 1/2 11 3/4 X 61 1/8

ANDOMTEP21TALL 19 1/4 X 60 1/2 20 5/8 X 61 1/8

ANDOSBC60-VCD/VSB6035 12 5/8 X 21 1/2 14 X 22 3/4

ANDOVCD/VSB60 12 5/8 X 18 1/2 14 X 19 3/4

ANDOVSB60-3D 18 5/8 X 18 1/2 20 X 19 3/4

ANDOVSB6035-4D 18 5/8 X 21 1/2 20 X 22 3/4

Spec book

Standard

Drawer Box Sizes - StandardK24

Repl

acem

ent P

arts

PART Standard

PKDC1.88X26.00X18.94 1 7/8 X 26 X 18 15/16

PKDC1.88X32.00X18.94 1 7/8 X 32 X 18 15/16

PKDC3.88X11.00X15.69 3 7/8 X 11 X 15 11/16

PKDC3.88X11.00X18.94 3 7/8 X 11 X 18 15/16

PKDC3.88X11.00X21.69 3 7/8 X 11 X 21 11/16

PKDC3.88X12.50X21.69 3 7/8 X 12 1/2 X 21 11/16

PKDC3.88X14.00X15.69 3 7/8 X 14 X 15 11/16

PKDC3.88X14.00X18.94 3 7/8 X 14 X 18 15/16

PKDC3.88X14.00X21.69 3 7/8 X 14 X 21 11/16

PKDC3.88X15.50X21.69 3 7/8 X 15 1/2 X 21 11/16

PKDC3.88X17.00X15.69 3 7/8 X 17 X 15 11/16

PKDC3.88X17.00X18.94 3 7/8 X 17 X 18 15/16

PKDC3.88X17.00X21.69 3 7/8 X 17 X 21 11/16

PKDC3.88X18.50X21.69 3 7/8 X 18 1/2 X 21 11/16

PKDC3.88X20.00X15.69 3 7/8 X 20 X 15 11/16

PKDC3.88X20.00X18.94 3 7/8 X 20 X 18 15/16

PKDC3.88X20.00X21.69 3 7/8 X 20 X 21 11/16

PKDC3.88X23.00X21.69 3 7/8 X 23 X 21 11/16

PKDC3.88X6.50X18.94 3 7/8 X 6 1/2 X 18 15/16

PKDC3.88X8.00X15.69 3 7/8 X 8 X 15 11/16

PKDC3.88X8.00X18.94 3 7/8 X 8 X 18 15/16

PKDC3.88X8.00X21.69 3 7/8 X 8 X 21 11/16

PKDC3.88X9.50X21.69 3 7/8 X 9 1/2 X 21 11/16

PKDC4.00X26.00X21.69 4 X 26 X 21 11/16

PKDC4.00X29.00X21.69 4 X 29 X 21 11/16

PKDC4.00X32.00X21.69 4 X 32 X 21 11/16

PKDC4.00X35.00X21.69 4 X 35 X 21 11/16

PKDC7.13X11.00X15.69 7 1/8 X 11 X 15 11/16

PKDC7.13X11.00X18.94 7 1/8 X 11 X 18 15/16

PKDC7.13X11.00X21.69 7 1/8 X 11 X 21 11/16

PKDC7.13X14.00X15.69 7 1/8 X 14 X 15 11/16

PKDC7.13X14.00X18.94 7 1/8 X 14 X 18 15/16

PKDC7.13X14.00X21.69 7 1/8 X 14 X 21 11/16

PKDC7.13X17.00X15.69 7 1/8 X 17 X 15 11/16

PKDC7.13X17.00X18.94 7 1/8 X 17 X 18 15/16

PKDC7.13X17.00X21.69 7 1/8 X 17 X 21 11/16

PKDC7.13X20.00X15.69 7 1/8 X 20 X 15 11/16

PKDC7.13X20.00X18.94 7 1/8 X 20 X 18 15/16

PKDC7.13X20.00X21.69 7 1/8 X 20 X 21 11/16

PKDC7.13X23.00X21.69 7 1/8 X 23 X 21 11/16

PKDC7.13X8.00X15.69 7 1/8 X 8 X 15 11/16

PKDC7.13X8.00X18.94 7 1/8 X 8 X 18 15/16

PKDC7.13X8.00X21.69 7 1/8 X 8 X 21 11/16

PKDC7.13X25.81X21.69 7 1/4 X 25 13/16 X 21 11/16

PKDC7.25X31.81X21.69 7 1/4 x 31 13/16 x 21 11/16

Spec book

PART Dovetail

PKDC2.00X26.45X17.72 2 X 26 7/16 X 17 11/16

PKDC2.00X32.45X17.72 2 X 32 7/16 X 17 11/16

PKDC4.00X11.45X14.76 3 15/16 X 11 7/16 X 14 3/4

PKDC4.00X11.45X17.72 3 15/16 X 11 7/16 X 17 11/16

PKDC4.00X11.45X20.67 3 15/16 X 11 7/16 X 20 11/16

PKDC4.00X12.95X20.67 3 15/16 X 12 15/16 X 20 11/16

PKDC4.00X14.45X14.76 3 15/16 X 14 7/16 X 14 3/4

PKDC4.00X14.45X17.72 3 15/16 X 14 7/16 X 17 11/16

PKDC4.00X14.45X20.67 3 15/16 X 14 7/16 X 20 11/16

PKDC4.00X15.95X20.67 3 15/16 X 15 15/16 X 20 11/16

PKDC4.00X17.45X14.76 3 15/16 X 17 7/16 X 14 3/4

PKDC4.00X17.45X17.72 3 15/16 X 17 7/16 X 17 11/16

PKDC4.00X17.45X20.67 3 15/16 X 17 7/16 X 20 11/16

PKDC4.00X18.95X20.67 3 15/16 X 18 15/16 X 20 11/16

PKDC4.00X20.45X14.76 3 15/16 X 20 7/16 X 14 3/4

PKDC4.00X20.45X17.72 3 15/16 X 20 7/16 X 17 11/16

PKDC4.00X20.45X20.67 3 15/16 X 20 7/16 X 20 11/16

PKDC4.00X23.45X20.67 3 15/16 X 23 7/16 X 20 11/16

PKDC4.00X26.45X20.67 3 15/16 X 26 7/16 X 20 11/16

PKDC4.00X29.45X20.67 3 15/16 X 29 7/16 X 20 11/16

PKDC4.00X32.45X20.67 3 15/16 X 32 7/16 X 20 11/16

PKDC4.00X35.45X20.67 3 15/16 X 35 7/16 X 20 11/16

PKDC4.00X6.95X17.72 3 15/16 X 6 15/16 X 17 11/16

PKDC4.00X8.45X14.76 3 15/16 X 8 7/16 X 14 3/4

PKDC4.00X8.45X17.72 3 15/16 X 8 7/16 X 17 11/16

PKDC4.00X8.45X20.67 3 15/16 X 8 7/16 X 20 11/16

PKDC4.00X9.95X20.67 3 15/16 X 9 15/16 X 20 11/16

PKDC7.00X11.45X14.76 7 X 11 7/16 X 14 3/4

PKDC7.00X11.45X17.72 7 X 11 7/16 X 17 11/16

PKDC7.00X11.45X20.67 7 X 11 7/16 X 20 11/16

PKDC7.00X14.45X14.76 7 X 14 7/16 X 14 3/4

PKDC7.00X14.45X17.72 7 X 14 7/16 X 17 11/16

PKDC7.00X14.45X20.67 7 X 14 7/16 X 20 11/16

PKDC7.00X17.45X14.76 7 X 17 7/16 X 14 3/4

PKDC7.00X17.45X17.72 7 X 17 7/16 X 17 11/16

PKDC7.00X17.45X20.67 7 X 17 7/16 X 20 11/16

PKDC7.00X20.45X14.76 7 X 20 7/16 X 14 3/4

PKDC7.00X20.45X17.72 7 X 20 7/16 X 17 11/16

PKDC7.00X20.45X20.67 7 X 20 7/16 X 20 11/16

PKDC7.00X23.45X20.67 7 X 23 7/16 X 20 11/16

PKDC7.00X26.45X20.67 7 X 26 7/16 X 20 11/16

PKDC7.00X29.45X20.67 7 X 29 7/16 X 20 11/16

PKDC7.00X32.45X20.67 7 X 32 7/16 X 20 11/16

PKDC7.00X8.45X14.76 7 X 8 7/16 X 14 3/4

PKDC7.00X8.45X17.72 7 X 8 7/16 X 17 11/16

Replacement Parts

Drawer Box Sizes - Dovetail K25Spec book

Repl

acem

ent P

arts

K26

Notes

Spec book

Framed Cabinet Specifications L1

Framed C

abinet Specifications

WoodThe fine “furniture” finish of your cabinets is designed for daily usage. All wood and laminate surfaces may be cleaned with a damp, soft cloth moistened with pure soap suds (not detergent), then wiped dry with another soft cloth. As with all cabinet sur-faces, take a little extra care on bottom edges of cabinets and cabinet doors where invisible moisture often collects.

Note: DO NOT use detergents, soap pads, steel wool, or other harsh, abrasive material on your cabinetry.

Polishing WoodRemove dust from cabinets frequently with a soft lint-free cloth. The cloth may be slightly dampened with water or a spray type dust remover.

Clean spills immediately. Use a clean cloth and mild soap if necessary. Wipe dry with a clean soft cloth.

We recommend that you wash and polish cabinets once or twice a year. Use a light coat of quality furniture polish. Don’t use a paste wax; the wax build up is difficult to remove and will leave a residue that attracts dust and moisture. Polishes that contain silicone should not be used.

Laminate Door SurfacesPeriodically clean the interior and exterior surfaces of the door using a soft, dampened cloth. Tough stains may be cleaned using a soft cloth dampened with a “409” or “Simple Green” type cleanser.

Wire Storage ProductsPeriodically clean with soft damp cloth. Note: Do not use detergents, soap pads, steel wool, or other harsh, abrasive material.

Roller Slide SystemsPeriodically clean with a soft damp cloth. Ball bearing slides are lubricated with grease from the manufacturer to ensure smooth quiet operation and long life. Avoid removal of this grease during cleaning.

Preventative Care: Self-Cleaning OvensSelf-cleaning ovens are cleaned through the use of intense heat. If the heat gasket does not seal properly, heat may escape from the oven. Cabinet components installed near the oven may suffer finish or surface damage. To minimize the risk of damage during cleaning cycles, we recommend that you open doors and drawers from cabinets that are above and adjacent to a self-cleaning oven.

Preventative Care: Heat-Producing AppliancesWe recommend that you do not mount heat-producing appliances (such as coffee makers and toaster ovens) beneath cabinets. Excess heat and moisture from these appliances can damage cabinets.

The Beauty Of Natural WoodThe natural hardwoods we use in our product have characteris-tics that make every cabinet both beautiful and unique. All hardwoods have their own personality, and variation in color, texture, and grain pattern are an inherent part of this natural material.

Natural hardwood variations often include distinctive grain patterns or unusual shadings in color. These reflect the “life history” of the tree and contribute to the unique look of your cabinets.

As with other natural materials, your hardwood cabinets will be affected by environmental factors such as natural and artificial lighting, so you can expect to see the color gradually change and mellow over time.

Your satisfaction is important to us, and we want you to feel as good about buying our cabinets as we do about making them. Be assured only the best materials go into our natural hardwood cabinetry, including those hardwoods that may be considered unique. Because, at Masco Cabinetry LLC, we believe natural distinctive hardwoods are beautiful.

Due to the unique qualities inherent in the natural hardwoods used in this cabinetry, neither Masco Cabinetry LLC, nor your dealer, can be responsible for the actual degree of variation that may characterize your cabinetry purchase.

Warping, Cracking & Proper HumidityAs a natural characteristic, all wood products contain moisture. Changes in temperature and humidity affect the moisture con-tent in wood, which causes wood to expand or contract. Over time, this expansion or contraction can cause warping and joint cracks to occur, potentially causing permanent deformations, in wood cabinetry.

To help prevent excessive movement in your wood cabinetry, we recommend maintaining a controlled environment of 70 degrees to 75 degrees Fahrenheit and 30% to 50% humidity in the areas where your cabinetry is stored or installed. Environmental condi-tions cannot be controlled by Masco Cabinetry and the effects of movement in wood is not considered to be a manufacturing defect and will not be considered as a reason for replacement.

Use and Care

Spec book

Fram

ed C

abin

et S

peci

ficat

ions

Framed Cabinet SpecificationsL2

General1.01 Scope1.01.01 The scope of this specification is to cover the

design, construction and installation of all framed Merillat kitchen and vanity cabinetry.

1.02 Submittals1.02.01 Supplier will furnish shop drawings, which are

taken from the architect’s drawings, specifically calling out the cabinet nomenclature and sizes. Supplier shall also submit floor plans and elevations for the cabinets showing layout, dimensions and details of installation.

1.02.02 Submit cabinet door samples with manufactur-er’s range of colors for selection by the archi-tect.

1.02.03 Submit manufacturer’s literature on cabinets.2.0 Product2.01 Cabinets shall be “ ” (specify door style) as

manufactured by Masco Cabinetry LLC, P.O. Box 1946, Adrian, MI 49221. Size and type as required to meet configurations indicated on drawings.

2.02 Certification2.02.01 Merillat® cabinetry carries the seal of the

Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86.

Merillat Cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA.

All Merillat Cabinetry facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.

2.03 Frame Materials-Case Construction Depending on the door style selected, all

Merillat Cabinetry cabinet frames shall be con-structed of solid hardwood matched to the door and drawer front species. All veneered compo-nents shall be selected architectural grade hard-wood veneer depending on style selected.

2.03.01 Frame Stiles/Rails Cabinet frames shall have 3

⁄4" thick x 1 1⁄2" wide

solid hardwood rail and stile members. Center stiles shall be 3

⁄4" thick x 3" or 6" wide solid hardwood. All frame joints shall be reinforced and precisely aligned with two birch dowels bonded with adhesive or with two No. 7 x 1 1

⁄4" fillister head screws.2.03.02 Standard End Panels

Standard wall, base and vanity cabinet end panels shall be 3

⁄8" thick engineered wood lami-

nated on both sides with a moisture- and stain-resistant, easy clean laminate.

Exposed top and bottom edges are foiled with a natural woodgrain finish.

Tall cabinet end panels shall be 1⁄2" thick engi-

neered wood also laminated on both sides as previously described.

End panels shall be machined to accept tops, bottoms, backs and corner gussets.

2.03.04 Standard Construction Wall Tops/Bottoms Wall cabinet tops and bottoms shall be 1

⁄2" thick engineered wood for extra strength and rigidity. Both sides shall be covered with a moisture- and stain-resistant, easy clean natural woodgrain laminate.

A dado joint and adhesive shall be used to join the tops and bottoms to the end panels.

2.03.05 Standard Base Tops/Bottoms Base cabinet bottoms shall be 1

⁄2" thick engi-neered wood for extra strength and rigidity. Bottoms shall be covered on the interior side only with a moisture- and stain-resistant, easy clean natural woodgrain laminate.

A dado joint and adhesive shall be used to join the bottom to end panels.

The upper portion of base cabinets shall be rein-forced with 1

⁄2" thick engineered wood gussets in all four corners which help to maintain square-ness.

2.03.06 Standard Base/Vanity Backs Base and vanity cabinet back panels shall be 1

⁄4" thick engineered wood covered on the interi-or surface only with a moisture- and stain-resis-tant, easy clean natural woodgrain laminate that extends to the floor.

The back panel shall be retained by a rabbet in the end panels secured with adhesive. The top of base and vanity cabinets shall have an 11

⁄16" x 2 1

⁄4" solid pine (or Douglas Fir) screw rail retained by the same rabbet as the back panel in the end panels and secured with adhesive. The screw rail shall be grooved full length on the underside to accept the top edge of the back panel.

2.03.07 Standard Wall Backs Wall cabinet back panels shall be 3/8” thick engineered wood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate. Exposed top and bottom edges are foiled with a natural woodgrain finish. Wall cabinet back panels shall be retained by a rabbet in the end panels and secured with adhesive. For extra strength, full-length dadoes shall be machined in the back panel near the top and bottom edges same as the dadoes in the end panels to accept the top and bottom panels and shall be secured with adhesive and staples.

Wall cabinet backs shall be additionally rein-

Framed Cabinet Specifications

Spec book



Framed Cabinet Specificationsforced from behind with 2 ¾” wide x 3/8” thick engineered wood full-length hang rails across the cabinet top and bottom held in place with sta-ples. Only the edges of the hang rails are exposed which are foiled with a natural wood-grain finish.

In addition, a 3/8” thick engineered wood spac-er shall be centered on the backside of the back panel of cabinets 27” wide and wider secured with adhesive and are fully concealed after cabi-net installation.

2.03.08 Standard Tall Backs Tall cabinet back panels shall be 1

⁄4" thick engineered wood covered on the interior surface only with a moisture- and stain-resistant, easy clean natural woodgrain laminate.

36" wide Utility cabinet (U) back panels shall be 3

⁄8" thick engineered wood laminated on the inte-rior surface only.

Tall cabinet back panels shall be retained by a rabbet in the end panels secured with staples and adhesive. The back panel shall be secured to the top panel, fixed shelf and bottom panel with staples. Tall cabinets with 1

⁄4" thick back panels shall be additionally reinforced with four 2 3

⁄4" wide x 1⁄4" thick engineered wood full-width

rails held in place with adhesive. 2.03.09 Standard Wall Shelves

All wall cabinets 24" (actual height is 23 1⁄2")

and higher shall have adjustable shelves made of 3

⁄4" thick engineered wood. Shelves shall be covered on both sides with a moisture- and stain-resistant, easy clean laminate.

The front edge shall be laminated with matching edge banding. The cabinet end panels shall be drilled for shelf supports adjustable on 2 1

⁄2" increments.

Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf. Adjustable shelves shall be supported at each corner with a locking clear polycarbonate shelf clip. 30" wide and wider wall cabinet shelves shall also be supported with a non-locking clear polycarbonate shelf clip installed in the cabinet frame center stile (not applicable in butt door cabinets).

2.03.10 Standard Toeboard Backers Toeboard backers shall be a minimum of 1/2" thick engineered wood extending from the floor to the cabinet bottom. This not only sup-ports the bottom but also effectively seals the toespace against vermin and insects.

2.03.11 Special Base Cabinets Base Corner Revolving and Base Lazy Susan cabinets have two 28" diameter revolving high impact white plastic shelves with reinforced bottoms, to provide 7.5 square feet of storage,

with finger-tip accessibility. Base Corner Revolving cabinets shelves rotate independently. Base Lazy Susan cabinet shelves rotate together with the pie-cut door attached.

Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf.

2.04 Drawer Construction 2.04.01 Drawer Cores

Standard drawer cores use a 3⁄4 extension side-

mount white epoxy coated dual-captive roller drawer slide system with a load capacity rating of 75 lbs. and shall have 1

⁄2" thick engineered wood sides that are attached to the 1

⁄2" thick engineered wood front and back.

Standard drawer interior height is 3 5⁄8"; base

cabinet inside front-to-back depth is 20 11⁄16".

Drawer core sides, front and back shall be cov-ered on the interior and exterior surfaces with a moisture- and stain-resistant, easy clean natural woodgrain laminate. The top edges of drawer core sides, front and back shall be square and laminated with matching edge banding. Drawer sides shall be rabbeted on each end to receive the front and back. Joints shall be secured with adhesive and staples.

Standard drawers are not available in All Plywood Construction.

2.04.02 Drawer Bottoms Drawer bottoms shall be 1

⁄4" thick engineered wood covered on the interior side only with a moisture-and-stain resistant, easy clean natural woodgrain laminate to match the drawer core. For additional support, drawers 30" and wider shall use a 3

⁄8" thick engineered wood bottom panel covered with matching laminate on the interior side. Bottoms shall be attached to the drawer core with adhesive and staples.

2.04.03 Dovetail Drawers Dovetail drawers use a full extension concealed under-mount slide system with an integrated SoftAction+™ closing mechanism that allows even fully loaded drawers to close gently. As an added feature, the slide system provides the ability to adjust the drawer up or down at the front corners. Slides have a load capacity rating of 75 lbs.

Drawer cores shall have 3⁄4" thick glued-up solid

hardwood sides, front and back finished on exposed surfaces with a durable sealer and top-coat joined at all four corners with a precision traditional half-blind dovetail joint secured with adhesive. The drawer core bottom panel shall be 3-ply 5.2mm thick plywood finished with a mois-ture- and stain-resistant, easy clean laminate on the interior surface printed to match the drawer core. The bottom panel is captured in a dado on all four edges machined into the sides, front and back. Drawers 30" and wider include a 3

⁄8" thick

Spec book

Fram

ed C

abin

et S

peci

ficat

ions


wood cleat running front-to-back attached to the underside of the drawer bottom panel for addi-tional support. These drawers have a capacity rating of 75 lbs. The drawer side interior height is 3 5

⁄16". Base cabinet inside front-to-back draw-er depth is 19 1

⁄4"; vanity cabinet inside front-to-back drawer depth is 16 5

⁄16". Vanity space saver cabinet inside front-to-back drawer depth is 13 11

⁄32". 2.04.04 Standard Roll-Out Trays

Most standard base cabinets are available with roll-out trays. Trays use a 3

⁄4 extension white epoxy coated side-mount dual-captive roller drawer slide system with a load capacity rating of 75 lbs.

Tray sides and back shall be 1⁄2" thick engi-

neered wood. Tray sides and back shall be cov-ered on the interior and exterior surfaces with a moisture- and stain-resistant, easy clean natural woodgrain laminate. Top edges of the tray sides and back shall be square and laminated with matching edge banding. The tray sides shall be rabbeted on each end to receive the front and back.

Tray fronts shall be 3⁄4" thick solid hardwood fin-

ished on the front and top surfaces with a tough coating of heat activated conversion varnish which is impervious to household chemicals and shall be rabbeted on each end to receive the bottom sides and along the bottom edge to receive the bottom. All four corners of the tray shall be joined with staples.

The roll-out tray bottom panel shall be 1⁄4" thick

engineered wood covered on the interior side only with a moisture-and-stain resistant, easy clean natural woodgrain laminate to match the tray core. Bottoms shall be attached to the tray core with adhesive and staples.

Interior height is 15⁄8" along all four edges; base

cabinet roll-out tray inside front-to-back depth is 20 11

⁄16".2.04.05 Solid Wood Roll-Out Trays

Solid wood roll-out trays (ROT) can be purchased separately for field installation.

Trays use a ¾ extension white epoxy coated side-mount dual-captive roller drawer slide sys-tem with a load capacity rating of 75 lbs.

Tray sides and back shall be 1⁄2" thick solid

wood, finished with a durable sealer and top coat. The tray sides shall be rabbeted on each end to receive the front and back.

Tray fronts shall be 3⁄4" thick solid hardwood fin-

ished on the front and top surfaces with a tough coating of heat activated conversion varnish which is impervious to household chemicals. Tray fronts shall be rabbeted on each side to receive the sides and along the bottom edge to receive the bottom panel. All four corners of

the tray shall be joined with adhesive and sta-ples.

The tray bottom panel shall be 3-ply 5.2mm thick plywood covered on the interior side with a moisture-and-stain resistant, easy clean natural woodgrain laminate to match the tray core. For additional support, roll-out trays 30" and wider shall use 3

⁄8" thick plywood bottom panel cov-ered with laminate on the interior side that matches the tray core. Bottom shall be attached to the tray core with adhesive and sta-ples.

Interior height is 15⁄8" along all four edges; base

cabinet roll-out tray inside front-to-back depth is 20 11

⁄16". 2.04.06 Deep Roll-out Trays

Most base cabinets are available with deep roll-out trays installed and can be purchased sepa-rately for field installation. Deep roll-out trays shall have 1

⁄2" thick glued-up solid hardwood sides, fronts and backs finished with a durable sealer and topcoat. A 1 15

⁄16" deep scalloped fin-ger pull cutout shall be machined at the tray front mid-point.

Tray side interior height is 3 3⁄16", inside front-to-

back depth is 20 11⁄16". Sides, back and front

are assembled using a half-blind dovetail joint secured with adhesive at all four corners. The tray bottom shall be 3-ply 5.2mm thick plywood with a moisture- and stain-resistant, easy clean natural woodgrain laminate on the interior sur-face printed to match the sides, front and back. The bottom is captured in a dado within the sides, front and back. Deep roll-out trays 30" and wider use a 3

⁄8" thick wood bottom cleat mounted front-to-back attached to the tray bot-tom underside for additional support.

All deep roll-out trays shall use a 3⁄4 extension

white epoxy coated side-mount dual-captive roll-er drawer slide system except for BSD30B 2DF and BSD36B 2DF cabinets which use a full extension side-mount ball bearing slide system utilizing adjustable rear support adapters. Both systems have a load capacity rating of 75 lbs.

2.04.07 Standard Base Shelves Most base cabinets are available with half-depth or full-depth adjustable shelves. Shelves shall be 3

⁄4" thick engineered wood. Full-depth shelves shall be covered on both sides with a moisture- and stain-resistant, easy clean laminate match-ing the cabinet interior.

Half-depth shelves are laminated on the top sur-face only and not on the underside. The front edge shall be laminated with matching edge banding. Again, half-depth shelves are laminated on the top side only. All half-depth shelves 27" wide and wider shall have a matching engi-


Spec book



neered wood support cleat across the front underside for additional strength.

Base cabinet end panels shall be drilled for clear polycarbonate shelf supports on 2 1

⁄2" increments.

Shelves are designed to support 15 lbs. per square foot, not to exceed 50 lbs. per shelf.

2.04.09 Drawer & Roll-out Tray Slides The 3

⁄4 extension white epoxy coated side-mount dual-captive roller drawer slide system shall be used on all standard Merillat drawers, roll-out trays, solid wood trays for All Plywood Construction and deep roll-out trays. The system shall consist of a pair of 1.25mm steel slides that roll on close-tolerance nylon wheels.

The support channel half of the slide system shall be mounted to the front frame of the cabi-net with a screw and into an adjustable plastic rear mounting bracket on the interior side of the cabinet back panel.

The drawer and tray core half of the slide sys-tem shall be attached to the front and back of the core with screws. The “L” shaped bottom of this member wraps around the bottom of the core to reinforce it and provide a finished edge.

This dual-captive epoxy coated steel drawer sys-tem and integrated rear mounting bracket sup-ports the drawer and roll-out tray to a load capacity rating of 75 lbs. All slides have a life-time limited guarantee to the original purchaser.

2.05 Door and Drawer Front Construction2.05.01 Arbor Falls Express Doors and Drawers Arbor

Falls Express doors and drawer fronts are 3⁄4"

thick-52 lb. furniture grade Medium Density Fiberboard (MDF). The one-piece MDF is preci-sion machined to exact tolerances. The compo-nent is laminated on the front side with a 12 mil vinyl foil that is thermo-formed to the door and drawer front face. The back of the component is laminated with water and abrasion resistant white melamine. Both surfaces have been devel-oped to provide the maximum opacity and resis-tant to abrasion, water and household chemi-cals and yellowing. Arbor Falls Express doors and drawer fronts have an integrated finger pull on all four edges making decorative hardware optional. Doors and drawer fronts shall have pli-able bumpers to dampen closure noise.

2.05.02 Marlin Express Doors Marlin Express doors shall have ¾” thick x 2”

wide frame components hand selected for uni-form and pleasing grain patterns. These solid hardwood stiles and rails shall be joined at the four corners with open mortise-and-tenon joints. The joints shall be bonded with adhesive and pins. The outside edges of the frame are slight-ly rounded and a reverse bevel of 15° shall be machined on the top and bottom edges to serve

as a finger grip making hardware optional. Sides shall have a square edge profile. Marlin Express stained finishes have a 5/32” thick veneered plywood flat center panel with that is retained by a groove machined in the frame. Marlin Express Cotton finished center panels will be either painted veneered plywood or Medium Density Fiberboard (MDF). Doors shall have pliable bumpers to dampen closure noise.

2.05.03 Marlin Express Drawers Marlin Express drawer fronts shall be ¾” thick

glued-up, solid hardwood selected for uniform and pleasing grain patterns. The outside edges of the drawer front are slightly rounded and a reverse bevel of 15° shall be machined on the top and bottom edges to serve as a finger grip making hardware optional. Sides shall have a square edge profile. Drawer fronts shall have pliable bumpers to dampen closure noise.

2.05.04 Seneca Ridge Express and Spring Valley Express Doors Seneca Ridge Express and Spring Valley Express doors shall have 3

⁄4" thick x 2 3⁄16" wide frame

components hand selected for uniform and pleasing grain patterns. These solid hardwood stiles and rails shall be joined at the four cor-ners with open mortise-and-tenon joints. The joints shall be bonded with adhesive and pins.

The frame shall be molded with a single bead detail on the inside edges and a coved/reverse bevel of 15° shall be machined on the top and bottom edges to serve as a finger grip making decorative hardware optional. Sides shall have a square edge profile.

Spring Valley Express stained finishes will have a 5

⁄32" thick plywood flat center panel with plain-sliced red oak or maple veneer on the face side that is retained by a groove machined in the frame. Spring Valley Express Cotton and Chiffon finished center panels will be either painted maple veneered plywood or Medium Density Fiberboard (MDF).

Seneca Ridge Express will have a raised plain-sliced veneer red oak or maple center panel that consists of engineered wood core with its edges machined in a coved shape. The front and back of the panel shall be covered with select hardwood veneers. The veneer shall be bonded to the substrate using adhesive, heat and pressure.

Prior to assembly of the door frame, foam expansion pads are placed in the grooves of the rails and stiles. This construction shall provide a strong door that resists the expansion, shrink-age and splitting associated with other types of raised panels.

As with all solid wood products, grain and wood color variations are inherent properties of wood.


Spec book

Fram

ed C

abin

et S

peci

ficat

ions


Doors shall have pliable bumpers to dampen clo-sure noise.

2.05.05 Seneca Ridge Express and Spring Valley Express Drawers Seneca Ridge Express and Spring Valley Express drawer fronts shall be 3

⁄4" thick glued-up, solid hardwood selected for uniform and pleasing grain patterns.

Drawer fronts have a coved/reverse bevel machined on the top and bottom edges to serve as a finger grip making decorative hardware optional. Sides shall be machined with a cove/square edge profile. Drawer fronts shall have pli-able bumpers to dampen closure noise.

2.05.06 Ralston Express Doors Ralston Express doors have ¾” x 3” stile and

rail frame components hand selected for uniform and pleasing grain patterns. These solid wood stiles and rails are joined at each corner with open mortise-and-tenon joints secured with adhesive and pins. The outside and inside frame edges shall have complimenting double bead profiles with a 90° return on all four perim-eter edges, requiring decorative hardware.

The flat center panel is 5⁄32" thick plywood with

plain-sliced veneer on the face side and is retained by a groove machined in the inside edges of the door frame.


2.05.07 Ralston Express Drawers Ralston Express drawer fronts shall be 3

⁄4" thick glued-up, solid hardwood selected for uniform and pleasing grain patterns. Drawer fronts have a decorative double bead profile with a 90º return on all four perimeter edges, requiring dec-orative hardware. Drawer fronts shall have pli-able bumpers to dampen closure noise.

2.05.08 Portrait Express Doors Portrait Express doors shall have ¾” x 2 3

⁄16" stile and rail frame components hand selected for uniform and pleasing grain patterns. These solid wood stiles and rails are joined at each corner with open mortise-and-tenon joints secured with adhesive and pins.

The outside front edges of the frame are slightly beveled and the back edges are rounded. Portrait Express frame inside edges are beveled at 25° as an added visual feature. Decorative hardware is required.

The flat center panel has a flat center panel which is 5

⁄32” thick plywood with plain-sliced veneer on the face side and is retained by a groove machined in the inside edges of the door frame.


2.05.09 Portrait Express Drawer Portrait Express drawer fronts shall be 3

⁄4" thick glued-up solid wood selected for uniform and pleasing grain patterns. The outside front edges are slightly beveled and the back edges are rounded. Decorative hardware is required.

Drawer fronts shall have pliable bumpers to dampen closure noise.

2.06 Hinges All hinges have a lifetime limited guarantee to the original purchaser.

2.06.01 All doors shall be mounted on concealed, nickel-finished self-closing hinges. Door hinges will self-close within 10º of cabinet face.

Maximum hinge opening angle for Arbor Falls Express, Seneca Ridge Express and Spring Valley Express is 105º. Maximum hinge opening angle for Ralston Express and Portrait Express is 107º.

2.07 Stain Finishes2.07.01 Seneca Ridge Express Red Oak and Spring

Valley Express Red Oak cabinets are available in Amaretto, Kona and Pecan stain finishes.

Portrait Express Red Oak cabinets are available in Amaretto, Kona, and Pecan stain finishes only. Portrait Express Maple, Seneca Ridge Express Maple and Spring Valley Express Maple are avail-able in Chiffon and Cotton (painted), Kona, Pecan, Sable, Sedona, and Toffee stain finishes. Marlin Express Hardwood cabinets are available in Cotton (painted), Kona and Pecan finishes. Ralston Express Maple cabinets are available in Chiffon and Cotton (painted), Kona, Sable, Sedona and Toffee finishes.

All stains contain pigments that accentuate the grain. Components are control-sanded to prepare the surface for staining. The penetrating stains are applied with a variety of specially designed spray equipment (door and drawer fronts), mechanical spray devices, (frames) or hand-spray equipment (accessories) tailored specifi-cally to the type of part being finished. The stain is brush-wiped into the pores to develop the desired color.

A sealer is then applied over the stain. The seal-er helps develop a bond to the stain as well as the topcoat. The sealer is the foundation of the protecting finish; helping to prevent warping and cracking of the hardwood. The sealer is carefully and thoroughly sanded to prepare the surface for topcoating. The heat activated catalyzed con-version topcoat creates a durable envelope pro-tecting the wood from chemicals, abrasion, and detergents. The conversion topcoat provides a full, smooth surface for a complete quality finish. The Chiffon and Cotton painted finishes consist of several coats of pigmented semi-opaque enamel paint


Spec book



which saturate the wood for a rich, beautiful color while allowing some of the natural beauty of the grain to remain visible.

A heat activated catalyzed conversion topcoat is applied creating a durable envelope protecting the painted finish from chemicals, abrasion and detergents. The characteristics of the wood are less noticeable with painted finishes than with stain finishes. Because wood naturally expands and contracts, you may see hairline cracks in the finish surface at the joints. Joint lines are normal and do not affect the strength of the face frame's, door's or drawer front's construction or finish.

2.07.02 Glaze Finishes Ralston Express, Seneca Ridge Express and Spring Valley Express cabinets are available in various glaze combination finishes. Ralston Express Maple cabinets are available in Chiffon with Desert (brown) Glaze (painted), Chiffon with Tuscan (light gray) Glaze (painted), Cotton with Tuscan (light gray) Glaze (painted), Sable with Ebony (black) Glaze and Toffee with Java (dark brown) Glaze.

All contain pigments that accentuate the wood grain. Components are control-sanded to prepare the surface for staining. The penetrating stains are applied with hand held spray equipment to develop the desired color.

A sealer is then applied over the stain. The seal-er helps develop a bond to the stain as well as the glaze material. The sealer is the foundation of the protecting finish, helping to prevent warp-ing and cracking of the hardwood. The sealer is carefully and thoroughly sanded to prepare the surface for glazing. The heat activated catalyzed conversion topcoat creates a durable envelope protecting the wood from chemical, abrasion and detergents.

The glaze material is applied to the face side only over the sealer-creating hang up in corner areas and in profiled recesses depending on the door style.

The conversion topcoat provides a full smooth surface for a complete quality finish. The Chiffon and Cotton painted finish consists of several coats of pigmented semi-opaque enamel paint which saturate the wood for a rich, beautiful color while allowing some of the natural beauty of the grain to remain visible.

The glaze material is applied to the face side only over the paint creating hang-up in the corner areas and in the profiled recesses depending on the door style.

A heat activated catalyzed conversion topcoat is then applied creating a durable envelope protect-ing the painted finish from chemicals, abrasion and detergents. Merillat uses solid wood as the

base material for painted finishes, whereas some other cabinetry manufacturers use engi-neered wood. The characteristics of the wood are less noticeable with painted finishes than with stained finishes. Because wood naturally expands and contracts, you may see hairline cracks in the finish surface at the joints. Joint lines are normal and do not affect the strength of the face frame's, door's or drawer front's con-struction or finish.

2.07.03 Finish Accent Glaze In addition to the standard finishes (Chiffon, Cotton, Kona, Sable, Sedona and Toffee), Seneca Ridge Express Maple and Spring Valley Maple Express cabinets are also available in var-ious accent glaze combination finishes. They are Chiffon with Desert (medium brown) Accent (painted), Chiffon with Tuscan (light gray) Accent (painted), Cotton with Tuscan (light gray) Accent (painted), Sable with Ebony (black) Accent, Sedona with Ebony (black) Accent and Toffee with Java (dark brown) Accent.

All contain pigments that accentuate the wood grain. Components are control-sanded to pre-pare the surface for staining. The penetrating stains are applied with a variety of specifically designed spray equipment tailored specifically to the type of part being finished. The stain is brushed-wiped into the pores to develop the desired color. A sealer is then applied over the stain.

The sealer helps develop a bond to the stain as well as the topcoat. The sealer is the foundation of the protecting finish; helping to prevent warp-ing and cracking of the hardwood. The sealer is carefully and thoroughly sanded to prepare the surface for topcoating and glazing.

The accent glazing material is hand applied to specific profiles depending on door style and then cured.

Finally, the heat activated catalyzed conversion topcoat is applied creating a durable envelope protecting the accent glaze and wood from chemicals, abrasion and detergents. The conver-sion topcoat provides a full, smooth surface for a complete quality finish.

The Chiffon and Cotton painted finishes consist of several coats of pigmented semi-opaque enamel paint which saturate the wood for a rich, beautiful color while allowing some of the natural beauty of the grain to remain visible. Merillat uses solid wood as the base material for painted finishes, whereas some other cabine-try manufacturers use engineered wood. The characteristics of the wood are less noticeable with painted finishes than with stained finishes. Because wood naturally expands and contracts, you may see hairline cracks in the finish surface


Spec book

Fram

ed C

abin

et S

peci

ficat

ions


at the joints. Joint lines are normal and do not affect the strength of the face frame's, door's or drawer front's construction or finish.

2.07.04 Some Merillat accessory items shall be top-coated with lacquer.

3.01 Fire Resistance3.01.01 Overlaid engineered wood used for cabinet con-

struction has been tested in accordance with UL standard recognized-ASTM E 162-90-Standard Test Method for Surface Flammability of Materials, using a radiant heat energy source, and HUD Standard 3280.203, .204 and .209.

4.01 Formaldehyde Emissions Levels4.01.01 Formaldehyde emissions comply with require-

ments of 24 CFR, Part 3280 (August 9, 1984), the HUD rule on Manufactured Home Construction and Safety Standards and 29 CFR Part 1910 (May 27, 1992), the OSHA rule on Occupational Exposure to Formaldehyde.

4.01.02 Formaldehyde emissions for raw engineered wood is restricted to 0.3 parts per million.

5.01 Installation5.01.01 Contractor shall verify all on-site dimensions

and notify supplier of any variances or changes.5.01.02 Install cabinets as indicated on the drawings.

Install plumb and level with all joints tight, in accordance with instructions shipped with sink base and vanity bowl cabinets.

5.01.03 Shim cabinets as required and trim with mold-ing to match cabinets.

5.01.04 Secure to walls with screws embedded one inch minimum in solid wood framing or blocking.

and plumb. For further information, send to Merillat for a

Cabinetry Selection Guide. (Masco Cabinetry LLC, P. O. Box 1946, Adrian, MI 49221). In keeping with our policy of continuous refinement, Masco Cabinetry LLC reserves the right to alter specifications and styles without general notice or obligation to make similar changes in products previously manufactured.

WARNING: This product contains chemicalsknown to the State of California to cause cancer.


Spec book

Looking for Merillat Express™ sales support? These resources can help.

©2013 Masco Cabinetry LLC. Merillat Express™ 6/13. Legal:#178805

Masco Cabinetry LLC warrants to the original consumer purchaser that our Merillat Express™ cabinetry will be free from defects in material and workmanship under normal use for a period of TEN (10) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.

Masco Cabinetry LLC may elect to repair or replace any defective Merillat Express™ product covered by our warranty.THIS WARRANTY DOES NOT COVER:

• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation,

storage or handling.

As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.

Masco Cabinetry LLC further provides a Lifetime Limited Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Lifetime Limited Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.

From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some provinces and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty is only valid in the United States of America and Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and from province to province.

To obtain performance under this warranty, you must contact your Merillat Express™ supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Merillat Express™ Warranty Department, Masco Cabinetry LLC, 4600 Arrowhead Drive, Ann Arbor, Michigan 48105 USA

For cabinetry purchased on or after January 5, 2009

Masco Cabinetry LLC 10 Year Limited Warranty.

Merillat.comThis consumer-facing website offers many ways to inspire organizational solutions in beautiful cabinetry options, as well as drive business to our dealers. Here are some highlights:

• View inspirational designs and photos.• Download floor plan drawings from photosets to gather design ideas.• Visualize door styles by wood species and finish.• Use the “Features & Accessories for Your Lifestyle” to view

organizational solutions by room type.• Engage consumers by directing them to the “Step-by-Step Kitchen

Planner” to create a mood board to share with their designer.• Educate consumers about wood characteristics, installation, Merillat

sustainability initiatives, and dos and don’ts of cabinetry care.

MerillatBusiness.comIf you’re not currently registered for MerillatBusiness.com, you could be missing important product and brand information that can assist you with your Merillat sales efforts. It’s quick and easy, so visit the site and register today. It will enable you to:

• Check order status.• Download or order product literature, like the product brochure,

specification and price books, door/style finish codes, and 20-20 Design updates. (For questions on 20-20 Design, email [email protected].)

• Download promotional materials, such as brand campaign print ads, direct mail postcards, videos and counter cards.

• Order samples and displays, like wood chips, selection centers, and sample doors and backer cards.

Automated Orders proCAB™proCAB™ is an online, web-based, real-time order management solution available for Merillat Cabinetry product lines. Sign up today if you don’t already have an account. Benefits of proCAB™ are:

• Order Entry and Inquiry• Import Kitchen Designs from 2020• No Charge Shortage and Damage Ordering• Quote Order Capabilities• Expedite Requests• Shipment Status Inquiry• Product Inquiry Search• Document Imaging to retrieve copies of acknowledgements, invoices,

and shipping reports• ACH electronic payment of your invoices• Outstanding Invoices• View open and paid invoices• View check number that paid a specific invoice and payment receipts

For more information, please contact us directly at(866) 628-1621 or [email protected]

Order Confirmation and TrackingYou can monitor your order using Merillat Business or proCAB. Simply login to review your confirmation that your order has been received and to also track it’s progress.

Merillat Express™ Cancellation PolicyMerillat Express™ cabinetry is made to order. That means we don’t start building your cabinets until your order is placed. Due to our fast 5-day shipping schedule, orders are fulfilled as quickly as possible, affecting our ability to accept cancellations. To consistently maintain the quick 5-day shipping schedule, our policy is that orders cannot be canceled once placed.

Merillat Customer Care ResourcesElectronic means are convenient, but sometimes you just need to talk to a person, and Merillat Customer Care consultants are here to help. Your consultant can help you:

• Order product.• Follow up on orders or track delivery progress.• Discuss product situations or address invoice questions.

Your Merillat® Account Manager is there to help you … every step of the way. Make sure to contact them whenever you have questions, concerns or need information.

Additional assistance is available through Customer Care:(855) 896-9803 or [email protected] M-F 8:00 am – 6:00 pm EST For Order Placement:Fax (866) 998-4432 or [email protected]

Merillat® cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86. Merillat Cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA. All Merillat Cabinetry facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.

©2015 Masco Cabinetry LLC. Printed in the USA (2890145) R 5/15

Merillat.com

Merillat E

xpress™ P

roduct Line Spec &

Price B

ook

Merillat Express™

Product Line Spec & Price Book

Documents

Merillat Express - Amazon S3...track it’s progress. Merillat Express Cancellation Policy Merillat Express cabinetry is made to order. That means we don’t start building your cabinets