Upload
others
View
17
Download
0
Embed Size (px)
Citation preview
www.sage.tubitak.gov.tr
MK-82-TTERMOBARİK BOMBATHERMOBARIC BOMB
KAPALI ALANLARDA YÜKSEK PERFORMANSHIGH PERFORMANCE OF CLOSED AREAS
PBP-003 / MK82-TPBP 003, bileşiminde ağırlıkça %20’nin
üzerinde metal tozu bulunduran plastik-bağlı termobarik bir patlayıcıdır. Patlama ile açığa çıkan basınç darbesi, mağara, sığınak, tünel ve karargah gibi kapalı alanlarda daha yüksek darbe ve basınç etkisi oluşturmaktadır. Ek olarak, metal tozlarının yanması sonucu açığa çıkan ısı, patlama sonucunda açığa çıkan alevin hacmini, sıcaklığını ve sönümlenme süresini arttırarak patlayıcının hedef üzerindeki ısı etkisi ile tahrip gücünü arttırmaktadır.
TENDÜREK Projesi kapsamında, PBP-003 Termobarik Patlayıcısı ile MK82 Genel Maksat Bombası’nın PBP-003 imlalı Termobarik varyantı (MK82-T) geliştirilmiştir.
GENEL ÖZELLİKLER• Hedef Üzerinde Arttırılmış Basınç ve Isıl Etki• Kapalı Alan Hedeflerinde Yüksek Etkinlik • Tüm Hava Koşullarında Görev Yapabilme• Yüksek Hassasiyet• Düşük Bakım Gereksinimi• En az 10 Yıl Raf Ömrü
TİPİK HEDEFLERKapalı Ortamlar• Sığınaklar• Mağaralar• Karargah Binaları• Tüneller• Uçak Hangarları
MK82-T ÖZELLİKLERİAğırlık : 500 lb (230 kg)
Patlayıcı : PBP 003 (Termobarik)
Patlayıcı Miktarı : ~ 90 kg
Patlayıcı Yoğunluğu : > 1.70 g/cm3
Patlayıcı İnfilak Hızı : > 6500 m/s
OPERASYONEL ÖZELLİKLER• Yüksek Basınç ve Darbe Etkisi• Daha Uzun ve Daha Yüksek Isıl Etkinlik• Güçlü Yok Edici Etki• Konvansiyonel MK82’ye göre Alev Hacminde
Artış• Konvansiyonel MK82’ye göre Alev
Sönümlenme Süresinde Artış
GÜDÜMMK82 Genel Maksat Bombası ile kullanılabilen
tüm kitler (örneğin; HGK-82, KGK-82, LGK-82, GBU-38, GBU-58) ile uyumludur.
YÜRÜMEKTE OLAN / PLANLANAN ÇALIŞMALAR
Termobarik Patlayıcılı Farklı Mühimmat Uygulamaları :
• MK Serisi Genel Maksat Bombaları• Nüfuz Edici Bomba (NEB)• Satha Atılan Orta Menzilli Mühimmat (SOM)• Delici Özellikli Mühimmatlar• İnsansız Hava Aracı Mühimmatları• Küçük Kalibre Mühimmatlar
MK-82-TTermobarik Bomba
KAPALI ALAN TESTİ
TNT TERMOBARİK
PBP-003 / MK82-TPBP-003 is a plastic-bonded thermobaric
explosive that contains more than 20% by weight metallic powder. The blast wave formed upon detonation creates more impulse and higher quasi-static pressure in indoor targets (caves, tunnels, bunkers etc.). Moreover, the additional amount of heat generated by burning of metallic powder increases the temperature of the flame and extends total time duration of the flame which enhance the thermal effectiveness of the explosive on targets.
In the scope of TENDÜREK project, a thermobaric explosive (PBP-003) and a thermobaric variant of MK82 General Purpose Bomb (MK82-T) have been developed.
GENERAL SPECIFICATIONS• Enhanced Pressure and Thermal Effects On
Target• High Effectiveness On Indoor Targets• Ability to Work in All Weather Conditions• High Precision• Low Maintenance Cost• Minimum 10 Years Shelf Life
TYPICAL TARGETSBuried and/or Indoor Targets• Bunkers• Caves• Command/Control Centers• Tunnels• Aircraft Shelters
SPECIFICATIONS OF MK82-T Weight : 500 lb (230 kg)
Explosive : PBP 003 (Thermobaric)
Filling Weight : ~ 90 kg
Explosive Density : > 1.70 g/cm3
Detonation Velocity : > 6500 m/s
OPERATIONAL SPECIFICATIONS• Higher Quasi-Static Pressure and Impulse • Higher and Longer Thermal Effects• Strong Destructive Effect• Increase in Total Flame Volume with respect to
Conventional MK82• Increase in Total Duration of the Time
The Flame Stays Alive with respect to Conventional MK82.
GUIDANCEMK82-T has the potential to be used with all
guidance kits (HGK-82, KGK-82, LGK-82, GBU-38 and GBU-58 etc.) which are compatible with MK82 General Purpose Bomb
ONGOING/FUTURE WORKSApplication of PBP-003 to various ammunitions
and munitions :
• Other MK Series General Purpose Bombs• Penetrator Bombs • Stand-off Munition • Unmanned Air Vehicle Munitions• Small Caliber Ammunitions
MK-82-TThermobaric Bomb
AÇIK ALAN TESTİ
MK-82 MK-82-T