Mobile Phone Secrets and Tricks

8/14/2019 Mobile Phone Secrets and Tricks

1/16

www.sanketham.tk


2/16

Mobile Phone Secre t s & Tr ick s

NOKIA

Nokia Universal Codes

Code Description :

These Nokia codes will work on most Nokia Mobile Phones

(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses thebest sound quality but talk time is reduced my approx. 5%

(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370#

(3) *#4720# Activate Half Rate Codec - Your phone uses a lower qualitysound but you should gain approx 30% more Talk Time.

(4) *#4720# Deactivate Half Rate Codec.

(5) *#0000# Displays your phones software version, 1st Line : SoftwareVersion, 2nd Line : Software Release Date, 3rd Line : Compression Type.

(6) *#9999# Phones software version if *#0000# does not work.

(7) *#06# For checking the International Mobile Equipment Identity (IMEINumber).

(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtainthe "p,w" and "+" symbols).

(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtainthe "p,w" and "+" symbols).

(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtainthe "p,w" and "+" symbols).

(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtainthe "p,w" and "+" symbols).

(12) *#147# (vodafone) this lets you know who called you last.


3/16

(13) *#1471# Last call (Only vodofone).

(14) *#21# Allows you to check the number that "All Calls" are diverted to

(15) *#2640# Displays security code in use.

(16) *#30# Lets you see the private number.

(17) *#43# Allows you to check the "Call Waiting" status of your phone.

(18) *#61# Allows you to check the number that "On No Reply" calls arediverted to.

(19) *#62# Allows you to check the number that "Divert If Unreachable (noservice)" calls are diverted to.

(20) *#67# Allows you to check the number that "On Busy Calls" are divertedto.

(21) *#67705646# Removes operator logo on 3310 & 3330.

(22) *#73# Reset phone timers and game scores.

(23) *#746025625# Displays the SIM Clock status, if your phone supports thispower saving feature "SIM Clock Stop Allowed", it means you will get the beststandby time possible.

(24) *#7760# Manufactures code.

(25) *#7780# Restore factory settings.

(26) *#8110# Software version for the nokia 8110.

(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date,4.Date of last repair(0000 for no repairs), 5.Transfer User Data. To exit thismode you need to switch your phone off then on again. ( Favourite )

(28) *#94870345123456789# Deactivate the PWM-Mem.

(29) **21*number# Turn on "All Calls" diverting to the phone number entered.

(30) **61*number# Turn on "No Reply" diverting to the phone number entered.

(31) **67*number# Turn on "On Busy" diverting to the phone number entered.


4/16

(32) 12345 This is the default security code.

Press and hold # Lets you switch between lines

NOKIA 5110/5120/5130/5190IMEI number: * # 0 6 #Software version: * # 0 0 0 0 #Simlock info: * # 9 2 7 0 2 6 8 9 #Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]Half Rate: * 4 7 2 0 #Provider lock status: #pw+1234567890+1Network lock status #pw+1234567890+2Provider lock status: #pw+1234567890+3SimCard lock status: #pw+1234567890+4

NOKIA 6110/6120/6130/6150/6190IMEI number: * # 0 6 #Software version: * # 0 0 0 0 #Simlock info: * # 9 2 7 0 2 6 8 9 #Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]Half Rate: * 4 7 2 0 #

NOKIA 3110

IMEI number: * # 0 6 #Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330*#06#This will show your warranty details *#92702689#*3370#Basically increases the quality of calling sound, but decreases battery length.#3370#

Deactivates the above*#0000#Shows your software version*#746025625#This shows if your phone will allow sim clock stoppage*4370#Half Rate Codec activation. It will automatically restart#4370#Half Rate Codec deactivation. It will automatically restart


5/16

Restore Factory SettingsTo do this simply use this code *#7780#Manufacturer InfoDate of Manufacturing *#3283#*3001#12345# (TDMA phones only)

This will put your phone into programming mode, and you'll be presented withthe programming menu.2) Select "NAM1"3) Select "PSID/RSID"4) Select "P/RSID 1"Note: Any of the P/RSIDs will work5) Select "System Type" and set it to Private6) Select "PSID/RSID" and set it to 17) Select "Connected System ID"Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't

know yours,ask your local dealer for it.8) Select "Alpha Tag"9) Enter a new tag, then press OK10) Select "Operator Code (SOC)" and set it to 205011) Select "Country Code" and set it to 302 for Canada, and 310 for the US.12) Power down the phone and power it back on againISDN CodeTo check the ISDN number on your Nokia use this code *#92772689#

Ericsson

Ericson T65*#05# Fake Insert puk screen Press no to exit

Ericsson T20

Ericsson T20

MENU tecnichal Info[type] >*


6/16

3] SIMlock4]setup

2] Service setup

1] Contrast

3]Service Test1] Display2]Leds3]Keyboard4] ringer5] Vibration6]Headset7] Microphone8]Clock

4] Names List

MENU info[Type] >*


7/16

Technical Info : >*


8/16

Net Monitor: 0 0 0 0 0 0 *

Samsung

Samsung SGH600/2100DBIMEI number: * # 0 6 #Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #Net Monitor: * # 0 3 2 4 #Chaning LCD contrast: * # 0 5 2 3 #Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#Reset pamieci CUSTOM: *2767*2878#Battery state: * # 9 9 9 8 * 2 2 8 #Alarm beeper: *#9998*289#

Vibra test: *#9998*842#

DancallIMEI number: * # 0 6 #Software version: * # 9 9 9 9 #

Philips*#3333*# Displays the blocking list.

*#7489*# Displays the security code.*#06# Displays the IMEI number.*#8377*# Displays the SW info.

Panasonic

Panasonic gd90 gd93*#9999# SW - Type the code on switch on , during network seek-Vers. SW and production code

Enable ringing and vibration contemporarilyEnable vibration with # then increase volume with "tone menu "

Panasonic gd70*#9999# SW - Type the code on switch on , during network seek-Vers. SW and production codeEnable ringing and vibration contemporarily


9/16


10/16

*#3333*# Displays the blocking list.*#7489*# Displays the security code*#06# Displays the IMEI number*#8377*# Displays the SW info.

NEC

NEC db2000*#2820# software vers.IMEI *#06#Reset *73738# (send?)SP Lock info:* # 3210 # (send?)Network barring info : *#8140# (send?)

( it could harm your phone )SIM lock it could harm your phone )*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock#4960* password # (send?) unlock[password] [8 digits]Net Lock*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock#7320* password # (send?) unlock[password] [ 8 digits]Net Lock 2:*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock

#2220* password # (invio?)unlock[password] [8 digits]Unlock subnetwork*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock#1110* password # (send?) unlock[password] [n 8 cifre]( it could harm your phone )

. TriumTrium Geo/Geo @ - Astral - Cosmo -Aria

Enter the menu and type *A new menu will be displayed :Application : SW version and battery's voltage

Trium Galaxyush * and type 5806: Production date and SW versionP


11/16

Telit

Telit GM 810MONITOR - technical menu - : type ++++ and push OK.Adiacent cells list : # and *Now if you push OK the phone displays battery ' s voltage and temperature

Sagem

Sagem MC959/940Select commands' menu and push *Displays a new menu' :

Appli : software vers. and battery's voltageEpromSim LockTest LCD: display test , green/red and vibration

Sagem MC920Select commands' menu and push *Displays 5 new menus :

1 APPLI

VERSION ( SW)BATTERY (voltage )2 PROM (IMEI)3!!! SIM LOCK (10 digits code requested ) !!!4- NETWORK (returns : OPTION NOT AVAILABLE)5- TEST LCDSYMBOL 1 (LCD)SYMBOL 2 (test2 LCD)BLACK (all icons and carachters displayed )FOR PHOTO (welcome message and time )VIBRATOR (vibration test )

Sony

Sony CMD Z5/J5Vers. SW :


12/16

Without SIM , switch on phone and type l *#7353273#

Eprom

!!! Sim Lock [10 digits code ] ( it could harm your phone )NETWORK : OPTION NOT AVAILABLETest LCD: display test of the green/red leds and vibrationPush * and type 4329 :enables/disables network monitor 1 (the same of MT35)Push * and type 621342 :enables/disables network monitor 2Push * and type 5807 : Serial Number Software Vers.Push * and type 936505: IMEI -- Software Vers.TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"Push * and type 362628: ISMI BLOCK (UNKNOWN)Push * and type 476989: NS BLOCK (UNKNOWN)Push * and type 482896:CP BLOCK (UNKNOWN)

Push * and type 787090: ? BLOCK (UNKNOWN)Push * and type 787292 : block current network!!! Push * and type 967678: SP LOCK!!!Push * and type 850696:Warm Start ( ENABLE/DISABLE)Push * and type 3926 : Swicth off phonePush * and type 5806: Production date and SW version

Motorola

Motorola V3688IMEI *#06#Enhanced Full Rate Codec EFREnable EFR : [][][] 119 [] 1 [] OK.disable EFR : [][][] 119 [] 0 [] OK

Tips and Tricks

Send an E-mail from your GSMFrom your telephone you can send an email to whichever E-mail customer of theInternet network.

The e-mail will be sent to the maximum of within an hour from the reception.

The sended message will contain in luminosity the telephone number of the


13/16

sender.

In order for sending e-mail, send an SMS with this syntax (always separated byspaces):

EMA name@domain text-of-your-email

Example: in order to send an email [email protected] , do the following:

[email protected] text-of-your-email

if your phone cant print @ replace it with a !

EMA johon!doe.com text-of-your-email

And then send this message to the folloving number: +39 338 8641732

Free SMS Center numbers

From your telephone you can send SMS messages of 160 char. max. to anotherGSM phone

Your message will be sent through an SMS Center (usually the one that gaveyour provider)

You pay a little fee depending of your provider, BUT YOU WILL HAVE TO PAY

something

In order for sending SMS without paying anything, you got to change your SMSCenter number with these one

+491722270300 or +358405202999 or +352021100003

Codes (that they dont tell you in the manual)To check the IMEI (International Mobile Equipment Identity) type: *#06#

Information you get from the IMEI:XXXXXX XX XXXXXX XTAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code).
http://us.f337.mail.yahoo.com/ym/[email protected]://us.f337.mail.yahoo.com/ym/[email protected]://us.f337.mail.yahoo.com/ym/[email protected]://us.f337.mail.yahoo.com/ym/[email protected]


14/16

FAC = Final Assembly Code (For Nokia phones FAC=10).

SNR = Serial Number.

SP = Spare (always SP=0).

To check the phone's software (firmware revision information) type: *#0000# ( orfor some phones outher then Nokia 61XX you can try *#model nummber# ex. for8110 *#8110#)

Information you can get from the phone's software version:V 3.1428-11-97NSE-3

1st line: Software version.

2nd line: The date of the software release.

3nd line: Phone type, .

Some versions and dates:

V 3.14 28/11/97

V4.33 11/03/98

V 4.73 22/04/98

V 5.24 14/9/98

Pin-Out Diagram for the 61101 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A2 - CHRG CTRL CHARGER CONTROL PWM 32Khz3 - XMIC MIC INPUT 60mV - 1V4 - SGND SIGNAL GROUND5 - XEAR EAR OUTPUT 80mV - 1V

6 - MBUS 9600 B/S7 - FBUS_RX 9.6 - 230.4 KB/S8 - FBUS_TX 9.6 - 230.4 KB/S9 - L_GND CHARGER / LOGIC GND

Revealing Headphone and Car-Kit Menus


15/16

Think about this: If you do these tricks the new menus can not be erased afterthe procedure. But it's not dangerous or harmful for your phone

To enable the headset-function, you have to short-circuit the "3" and "4". After ashort time there is "Headset" on the display Now, menu 3-6 is now enabled!

To enable the carkit-function you have to short-circuit the "4" and "5". After ashort time, "Car" is shown on the display and the menu 3-7 is enabled!!

This Trick is for you how want to hear more then your supposed to !If you short-circuit the left and the right contact with the middle contact ("3", "6"and "9") the Nokia Software hangs! The profile "Headset" will be activated.Before you do this, just active the "auto call receive" function in the headphoneprofile and set the ringing volume to "mute" Now you can use your phone forchecking out what people are talking about in a room. Place the phone

somewhere stratidic and call your phone! The phone receives the call withoutringing and you can listen to what people are talking about! .....gr8...

Serial numbers on your 6110For more info type: *#92702689#The first screen gives you the serial and IMEI number.Then there is the Date of Manufacture: ex. Made 1297Then there is the Purchasing Date: ex. Purchasing Date 0298Then there is the last Repair Date: ex. Repaired: 0000

Note: you must turn off the phone to exit after this test, because of the lastfunction, "transfer user data" which doesn't work as "standard"....You can usethis mode only to transfer all Calender, Profile and Callers Group Information toanother phone (eg. if you are replacing phone or configuring phones for usewithin your company or when a particular phone doesn't works correctly )

Activating and deactivating EFR and HFR, on your 6110*3370# to activate Enhanced Full Rate - Makes calls sound better, but decreasesthe battery life by about 5%.

#3370# to deactivate Enhanced Full Rate

*4720# to activate Half Rate Mode - Drops call quality, but increases battery lifeby about 30%.

#4720# to deactivate Half Rate Mode


16/16

Documents

Mobile Phone Secrets and Tricks