DATA ACQUISITION SOFTWAREModel : SW-818-WIN

Your purchase of this DATA ACQUISITION SOFTWARE

marks a step forward for you into the field of precision

measurement. Please read the following instructions

carefully and always keep this manual within easy reach.

OPERATION MANUAL

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com

MRC.11.17

TABLE OF CONTENTS

1. INTRODUCTION……………............................. 1

2. GENERAL SPECIFICATION……….................. 2

3. INSTALL AND START THE PROGRAM........... 33-1 Installation………………..............................33-2 Start The Program……………..................... 33-3 Confirmation Of The Peripheral Devices……3

4. USING SW-818-WIN…......................................44-1 System Setup...………………......................54-2 Into The Measurement................................ 64-3 Confirmation Of The Peripheral Devices..... 6

1. INTRODUCTION

When MRC meter with RS232 interface is connected to RSW-912 converter, Its data can be shared via WiFi technology directly.Therefore, if PC (desktop, laptop) install the SW-818, it can be read the measuring data via WiFi from those meters.Maximum 8 meter and 12 channels monitoring at the same time let you can get a complete data information. High, Low warming to monitor any unusually situation. Sample rate setting from 2 to 3600 seconds to satisfy your different demands..xxx.mdb data file can be retrieved by EXCEL, ACESS.., and other kinds of database software. Data analyze and demonstrate easily.

1

2. GENERAL SPECIFICATIONS

System Computer with following operating system :Requirement 1.Win 98 2.Win XP 3.Vista 4.Win 7

Monitor : VGA, EGA monitorBasic entry 1.IP Address, 2.Port, 3.Total Meter No.,

4.Channel No., 5.Sample Rate,parameter 6.Project Name, 7.Log File NameData Record Auto or ManualSample Rate 1 to 3,600 seconds.Data Save Data file : XXX.mdb.

* Automatic save to disk.Data file: XXX.xls* When recording data after the implementation of the Data query function screen appears,and then perform Export Data To Excel function, will produce XXX.xls file

Accessories CD disk........................................... 1 PC.Included Operation manual............................ 1 PC.

2

3. INSTALL AND START THE PROGRAM

3-1 InstallationBefore installation, please remove the previousversion data acquisition software.1. Start your windows.2. Insert the CD-ROM disc into your CD-ROM driver.3. In Windows XP or Windows 7, click Run from the

Start menu.4. Assume your CD-ROM driver is D:.

Run "D:\setup.exe" and click OK to start install3-2 Start The ProgramOnce you finish the installation, click the SW-818 from the program file3-3 Confirmation Of The Peripheral DevicesMake sure that the following matters before the implementation of this program.

4. USING SW-818-WIN4-1 System setupAfter run the program & the computer will show the Fig. 1.

1. Great New Project from File menu in the top-leftcorner or New Project icon and you will see a dialog box as Fig.2

2. Project Setting Function:* Enter the project name you want in the Project Name* Log File Name input file that you want to record names* Input a few seconds the record sum of the set in the

scan rate.

3

* Total Meter No. Settings 1-8 Meter you the number of measurements.

* Max. Record the number of records to be entered intothe computer.When the record is larger than the set items will be automatically increased the file name, however, can be set up 65000.

* Connection Timeout can be set (100-5000ms),when network disconnection exceeds the set range will Fig.6 screen.

* Storage time from 10-300 Sec set covering thestorage time can be set files in the Recovery Period.

3. Meter Setting Function: Such as Fig.7 screen* Enter the name you want in the Meter Name Icon.* Enter your IP Address Icon Network Address.* Enter your network communications Port in Port Icon.* Channel NO. Icon Input Meter Channel output number

1-12 Channel.* Display Type Icon set with Channel NO.

Choice and choose Display Type as (1,2,4,6,8,12).

4. Channel Setting Function:Fig.8 screen, the user according to the individual need to do different settings.* Display Setting: Do color display set* Low and High Warring Display: Color set is fixed

5. Project Summary: Such as the Fig.9 screen, made in accordance

with the user's previous settings are displayed .on this feature.

4

4-2 Into the measurement 1.

1. Open Project from File menu in the top-left corner 2.

or open file Icon xxx.daq with Fig.3 3.

2. The computer will show the Fig.4 4.

4-3 Tool Icon Description: 5.

Reference Fig.4 & Fig.5 6.

1. New Project button: The editor of the new project.2. Edit Project button: Edit the contents of the

old project.3. Save button: Planned to complete the test screen

to do storage. as Fig.44. Reconnect button: Software and network to link.5. Close Project: Open project is closed.6. SaveData button:

No matter the data record situation is Run or Pause,every time you press the button would record data once.

7. RUN / PAUSE button: 7.

* If it shows Run that means data record *

automatically. as Fig.4 *

* If it shows Pause that means data record stopping.as Fig.5

8. Data Query: Fig.10 picture will be displayed in Fig.4Data Query function

* To be analyzed in Fig.10-1 to select the file 7.

information . *

* Fig.10-2 to select the date you want to analyze and *

filling time you will want to analyze the Data Query

button data time, displayed in Fig.10-3 * * Press Export Data To Excel button Fig.10-3 Output to EXCEL ** Data Query function press the Exit button to leave

5

Fig.1

6

Fig.2

7

Fig.3

8

Fig. 4

9

Fig. 5

10

Fig. 6

11

Fig. 7

12

Fig. 8

13

Fig.9

14

Fig. 10

15 1301-SW818