MODULE: MESH

Select the module Mesh, change the Object from Assembly to Part and select a Part in the list.

Select Seed and Part… Set the Approximate Global Size 1.

In Mesh option click on Element type… Select an eligible sets.

Select Standart in Element library, in Family 3D stress and quit the reduce integration selection.

In Mesh list select the option Part… Click on yes to mesh the part. Same procedure in the Pile part to mesh.

The Mesh is created.

MODULE: JOB

Create a new Job, Click on Continue and OK.

Select Submit in the created Job to run the analysis. When the Job state change to Completed the analysis ends.On Job option select Results to see the results in the viewport.

MODULE: VISUALIZATION

Click on Plot Contours on Deformed shape. Select in the Field Output options Primary, U (Displacement) andMagnitude.

Select the View option and click on ODB Display Options… click on Mirror/pattern Tab and select YZ Mirrorplanes to generate a Mirror in that Plane and visualize a half of the model. To see the complete model select alsoXZ mirror planes.

Select Activate/Deactivate View Cut, In View Cut Manager select the plane to cut and displacing the Positionbutton.