87
Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2012-02-01 to 2012-02-29 Register issued on : 2012-03-02 A list of subsectors can be found at the end of this document.

Monthly Notifications Register - SUTN · which fulfil the requirements of DIN 18234-1, ... NTA 8074:2011 Concept nl ... Monthly Notifications Register

  • Upload
    buidan

  • View
    231

  • Download
    0

Embed Size (px)

Citation preview

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Register issued on : 2012-03-02

A list of subsectors can be found at the end of this document.

Information procedure Page 2

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector A : SERVICES

Register issued on : 2012-03-02

Page 3Subsector A01: TOURIST SERVICES

Subsector : A01 Registration Date : 2012-02-14Organization : AENORCountry : Spain Latest Date for Comments : 2012-03-15Project ID : P0034747/0002 Draft for public enquiryICS :National Ref : PNE 302001Title : Industrial tourism. Service provision requirementsScope : This standard establishes the internal management and service provision requirements for

organisations that provide industrial tourism services.

Relatedness :National : New

** End of Subsector **

Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst13187/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services for watches – RulesScope : This standard includes of hours clock, wall-clock, pocket-watch i.e. working with mechanic

and/or electronic system competent services’ rules about technical equipment, operation management, structural situation and functions of staff

Relatedness :National : New

Subsector : A11 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst13193/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services for watches – RulesScope : This standard includes of hours clock, wall-clock, pocket-watch i.e. working with mechanic

and/or electronic system competent services’ rules about technical equipment, operation management, structural situation and functions of staff

Relatedness :National : New

Subsector : A11 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst13211/0001 Project EstablishedICS : 03.080.30

Page 4

National Ref :Title : Authorized services for GSM cell phones-RulesScope : This standard includes rules for physical characteristics, technical equipment and personnel

of authorized services for ground asphalt and concrete laboratory testing equipments

Relatedness :National : New

** End of Subsector **

Subsector A12: CONSULTANCY SERVICES

Subsector : A12 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst88172/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places - Consultancy services-classification-general and special rulesScope : This standard, the structural features, management, employees and encompasses the

general rules of consultancy services

Relatedness :National : New

** End of Subsector **

Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024459/0001 Project EstablishedICS : 03.060, 03.080.20, 03.080.30National Ref : ÖNORM D 1040Title : Requirements of Credit Management in BusinessScope : The scope of this standard comprehends all aspects of credit management in business. They

contain services as well as underlying organization and processes, and the competences and ethical guidelines of the professional. Thus, this ÖNORM shall standardize the requirements for processes such as solvency monitoring, customer segmentation, billing, monition, up to legal advice and filing lawsuits where neccessary. Standards for technique, personnel, education, customer relations, terms of payment, collection procedures, key performance indicators, etc. have to be defined. This ÖNORM shall not contain any standardization of contractual partners of credit management, e.g., banks and insurance companies, lawyers and notaries, mercantile agencies, management consultants, collection institutes, credit insurance companies etc.

Relatedness :National : New

Subsector : A99 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024481/0001 Project Established

Page 5

ICS : 03.060, 03.080.20National Ref : ONR 46100Title : Guidelines for the selection of a pension fund company in AustriaScope : The intended ONR specifies the minimum contents of a tender required for the the

selection of a pension fund ('Pensionskasse'). The individual elements of a tender are described. Further, the ONR contains an evaluation pattern which helps to facilitate the selection of a pension fund.

Relatedness :National : New

Subsector : A99 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177871/0001 Project EstablishedICS :National Ref : X50-831Title : Beauty and wellness cares - Part 1 : general quality service and requirements

Relatedness :National : New

Subsector : A99 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst07850/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places - General rules for Turkish bathsScope : This standard includes general rules for structural characteristics, management and

technical equipment of Turkish baths

Relatedness :National : New

Subsector : A99 Registration Date : 2012-02-21Organization : TSECountry : TurkeyProject ID : tst71413/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places - Serving organization - General rulesScope : This standard, the structural features, management, employees and encompasses the

general rules of serving organization

Relatedness :National : New

Subsector : A99 Registration Date : 2012-02-08Organization : TSECountry : Turkey

Page 6

Project ID : tst88045/0001 Project EstablishedICS : 03.080.30National Ref :Title : Work places - General rules for doctor’s office Scope : This standard, the structural features, management, employees and encompasses the

general rules of doctor’s office

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 7

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector B : BUILDING AND CONSTRUCTION

Register issued on : 2012-03-02

Page 8Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 00516015/0001 Project EstablishedICS :National Ref : 00516015Title : Fire safety of large roofs for buildings, fire exposure from below - Part 1: Definitions,

requirements and tests, roof areas without openings

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 00516016/0001 Project EstablishedICS :National Ref : 00516016Title : Fire safety of large roofs for buildings, fire exposure from below - Part 2: List of roofs,

which fulfil the requirements of DIN 18234-1, roof areas without openings

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 00516017/0001 Project EstablishedICS :National Ref : 00516017Title : Fire safety of large roofs for buildings, fire exposure from below - Part 3: Definitions,

requirements and tests at roof penetrations and roof edges

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 00516018/0001 Project EstablishedICS :National Ref : 00516018Title : Fire safety of large roofs for buildings, fire exposure from below - Part 4: List of roof

penetrations and roof edges, which fulfil the requirements of DIN 18234-3

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-23Organization : NENCountry : Netherlands

Page 9

Project ID : 50001636/0001 Project EstablishedICS : 13.220.20National Ref : NEN 8073:2011 Concept nlTitle : Fixed firefighting systems - Automatic sprinkler installations - Technical additions - Part

1: Determination of diameters of arm pipes at large flow ratesScope : This is a series of technical agreements with additional information to the standards NEN-

EN 12845 consolidated with NEN 1073. The series contains the most important elements from the regulation for automatic sprinkler installations and adjustments form Dutch law.

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001637/0001 Project EstablishedICS : 13.220.20National Ref : NTA 8074:2011 Concept nlTitle : Fixed firefighting and control systems - Technical additions Scope : See title

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001639/0001 Project EstablishedICS : 13.220.20National Ref : NTA 8073-2:2011 Concept nlTitle : Fixed firefighting systems - Automatic sprinkler installations - Technical additions - Part

2: Thermoplastic stretch ceilings in sprinklered buildingsScope : This technical agreement gives specifications for the application of thermoplastic stretch

ceilings in sprinklered buildings. Besides application in addition to NEN-EN 12845+NEN 1073, the document is also applicable to sprinkler installations based on foreign standards.

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001666/0001 Project EstablishedICS : 13.220.50, 91.060.40National Ref : NEN 8062:2011 Concept nlTitle : Fire safety of buildings - Method for the determination of the fire safety of a provision for

the discharge of smoke of existing worksScope : This standard gives a method for the determination of the fire safety of a provision for the

discharge of smoke (chimney). in existing buildings. This standard also gives a determination method for the airtightness of a provision for the discharge of smoke. This standard is applicable to provisions with an internal diameter of 180 mm up to 250 mm.

Relatedness :

Page 10

National : New

Subsector : B01 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001667/0001 Project EstablishedICS : 91.060.40, 91.140.30National Ref : NEN 2757:2001/A1:2011 Concept nlTitle : Air supply and smoke outlet of incineration furnaces in buildings - Determination

methodsScope : This document amends NEN 2757:2001 with which the standard is renumbered. The title is

also adapted.

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177944/0001 Project EstablishedICS :National Ref : NF S 62-201Title : Fire fighting equipment - Fire hose reel - Installation and maintenance requirements

Relatedness :National : New

Subsector : B01 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0039028/0001 Project EstablishedICS :National Ref : PNE 23034Title : Fire safety. Signalling. Safety signs. Escape routesScope : This standard defines and describes the safety signs for fire safety in any situation where it's

necessary or useful to signal the location and type of access, escape routes and exits.

Relatedness :National : REV/AMD UNE 23034:1988

** End of Subsector **

Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024480/0001 Project EstablishedICS : 91.010.30National Ref : ONR 24009Title : Evaluation of load capacity of existing building constructionsScope : This ONR specifies the assessment of the bearing capacity and the serviceability of existing

Page 11

Scope : building constructions, in view of sustainability development of city and regional planning.

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001634/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8700:2011 nlTitle : Basis of structural assesment of existing structures - Safety levels for reconstruction and

disapprovalScope : This standard gives the principles and determination methods of specifications for safety,

usability and durability of existing structures in case of reconstruction of disapproval.

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001635/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8701:2011 Concept nlTitle : Actions on existing structures - Actions for the assessment of existing structures for

reconstruction and disapprovalScope : This standard contains principles and determination methods for actions for the

determination of the constructive safety and usability in case of reconstruction of an existing construction or in the case of testing to the disapproval level.

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001638/0001 Project EstablishedICS : 91.060.20National Ref : NEN 6707:2011 nlTitle : Fixing of roof coverings:Requirements and determination methodsScope : This standard gives specificaties for the strength of the fixing of roof coverings. This

standard is applicable to fixing of roof coverings.

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001645/0001 Project EstablishedICS : 91.010.30, 91.080.01

Page 12

National Ref : NEN 8702:2011 Concept nlTitle : Design of concrete structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001646/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8703:2011 Concept nlTitle : Design of steel structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001647/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8704:2011 Concept nlTitle : Design of steel and concrete structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001648/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8705:2011 Concept nlTitle : Design of timber structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001649/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8706:2011 Concept nlTitle : Design of masonry structures - Structural assessment of existing structuresScope : See title

Page 13

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001650/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8707:2011 Concept nlTitle : Geotechnical design - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001651/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8708:2011 Concept nlTitle : Geotechnical design - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001652/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8709:2011 Concept nlTitle : Design of aluminium structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001663/0001 Project EstablishedICS : 03.080.99, 91.080, 97.200.99National Ref : NPR 8020-51:2011 Concept nlTitle : Temporariness of stage structuresScope : This code of practice gives recommendations for the determination of the temporariness of

stage structures and the risks of weather influences on the structure. Circumstances when certain risk factors are not applicable, are indicated

Relatedness :

Page 14

National : New

Subsector : B02 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001708/0001 Project EstablishedICS : 13.310, 91.060.10, 91.060.50National Ref : NEN 5096:2012 Concept nlTitle : Burglary resistance - Façade elements with doors, windows, shutters and fixed infillings

- Requirements, classification and test methodsScope : This standard describes a test method for the determination of the resistance under static

loading, to determine the burglary resistance properties of windows, doors and shutters.

Relatedness :National : New

Subsector : B02 Registration Date : 2012-02-23Organization : TSECountry : TurkeyProject ID : tst03323/0002 Project EstablishedICS :National Ref :Title : Standard Test Method for Making, Accelerated Curing, and Testing Concrete

Compression Test SpecimensScope : This test method covers four procedures for making, curing, and testing specimens of

concrete stored under conditions intended to accelerate the development of strength. The four procedures are: Procedure A—Warm Water Method, Procedure B—Boiling Water Method, Procedure C—Autogenous Curing Method, and Procedure D—High Temperature and Pressure Method

Relatedness :National : NewInternational : Modified ASTM C 684:2003

** End of Subsector **

Subsector B03: CONCRETE

Subsector : B03 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001645/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8702:2011 Concept nlTitle : Design of concrete structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B03 (Secondary Subsector)

Registration Date : 2012-02-23

Page 15

Organization : NENCountry : NetherlandsProject ID : 50001647/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8704:2011 Concept nlTitle : Design of steel and concrete structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B03 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst87349/0001 Project EstablishedICS : 91.100.30National Ref :Title : Standard test method for determination of length change of concrete due to alkali-silica

reactionScope : This test method covers the determination of the susceptibility of an aggregate or

combination of an aggregate with pozzolan or slag for participation in expansive alkali-silica reaction by measurement of length change of concrete prisms.

Relatedness :National : New

** End of Subsector **

Subsector B10: TIMBER STRUCTURES

Subsector : B10 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001648/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8705:2011 Concept nlTitle : Design of timber structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

** End of Subsector **

Subsector B11: METAL STRUCTURES

Subsector : B11 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001646/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8703:2011 Concept nl

Page 16

Title : Design of steel structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B11 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001647/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8704:2011 Concept nlTitle : Design of steel and concrete structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B11 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001652/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8709:2011 Concept nlTitle : Design of aluminium structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

** End of Subsector **

Subsector B12: MASONRY

Subsector : B12 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001649/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8706:2011 Concept nlTitle : Design of masonry structures - Structural assessment of existing structuresScope : See title

Relatedness :National : New

** End of Subsector **

Subsector B13: SOLAR ENERGY

Page 17

Subsector : B13 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001714/0001 Project EstablishedICS : 27.160, 91.060.10, 91.060.20National Ref : NEN 7250:2012 Concept nlTitle : Solar energy systems - Integration in roofs and facades - Building aspectsScope : This pre-standard specifies the application of solar energy systems (or complete building

elements with photovoltaic (PV) or thermal solar systems) as an intergrated or stand-alone element of the external partition construction of buildings. It concerns roofs as well as facades of houses, residential buildings ans commercial and industrial buildings.

Relatedness :National : New

** End of Subsector **

Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 00515746/0001 Project EstablishedICS : 13.080.01National Ref : DIN 18141-1Title : Subsoil - Analysis of rock samples - Part 1: Determination of the unconfined

compressive strength

Relatedness :National : New

Subsector : B14 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001650/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8707:2011 Concept nlTitle : Geotechnical design - Structural assessment of existing structuresScope : See title

Relatedness :National : New

Subsector : B14 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : NENCountry : NetherlandsProject ID : 50001651/0001 Project EstablishedICS : 91.010.30, 91.080.01National Ref : NEN 8708:2011 Concept nlTitle : Geotechnical design - Structural assessment of existing structuresScope : See title

Page 18

Relatedness :National : New

Subsector : B14 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177810/0001 Project EstablishedICS :National Ref : PR NF P94-500Title : Geotechnical engineering missions - Classification and specifications

Relatedness :National : New

** End of Subsector **

Subsector B18: SCAFFOLDING

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812303/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13009:2012 Állványelemek anyagaiTitle : Scaffolding element materials

Relatedness :National : REV/AMD MSZ 13010-5:1979

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812304/0001 Draft for public enquiryICS : 91.220

National Ref :MSZ 13010:2012 Munka-, támasztó-, védő és felvonóállványok. Létesítési és biztonsági követelmények

Title : Working, supportive, protective and elevating scaffolding. Installation and safety requirements

Relatedness :

National :REV/AMD MSZ 13010-1:1979, MSZ 13010-2:1985,MSZ 13010-3:1985, MSZ 13010-5:1979, MSZ 20163:1985

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812305/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13011:2012 Állványok munkaszintjeinek elemeiTitle : Scaffolding working level elements

Relatedness :

Page 19

National :REV/AMD MSZ 13011-1:1976, MSZ 13011-2:1976, MSZ 13011-3:1976, MSZ 13011-4:1976, MSZ 13011-6:1976, MSZ 13011-7:1976, MSZ 13011-9:1976, MSZ 20163:1985

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812306/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13012:2012 Fa állványbakokTitle : Wooden trestles for scaffolding

Relatedness :National : REV/AMD MSZ 13012-1:1984, MSZ 13012-2:1984, MSZ 13012-3:1984, MSZ 13012-4:1984

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812307/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13013:2012 Fém álványbakokTitle : Metal trestles for scaffolding

Relatedness :National : REV/AMD MSZ 13013-1:1978, MSZ 13013-2:1978, MSZ 13013-3:1978

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812308/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13014:2012 Fa létraállványok elemeiTitle : Elements of wooden ladder scaffolding

Relatedness :

National :

REV/AMD MSZ 13014-1:1977, MSZ 13014-2:1977, MSZ 13014-3:1977, MSZ 13014-4:1977, MSZ 13014-5:1977, MSZ 13014-6:1977, MSZ 13014-7:1977, MSZ 13014-8:1977, MSZ 13014-9:1977, MSZ 13014-10:1977, MSZ 13014-11:1977, MSZ 13014-12:1977, MSZ 13014-13:1977, MSZ 13014-14:1977, MSZ 13014-15:1977, MSZ 13016:1976, MSZ 20163:1985

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812309/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13015:2012 CsőállványelemekTitle : Elements of tube scaffolding

Relatedness :

National :REV/AMD MSZ 13015-1:1978, MSZ 13015-2:1978, MSZ 13014-3:1978, MSZ 13014-4:1978, MSZ 13014-5:1978, MSZ 13014-6:1978, MSZ 13014-7:1979, MSZ 13014-8:1979, MSZ 13014-9:1979, MSZ 13014-10:1979

Page 20

Subsector : B18 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34812310/0001 Draft for public enquiryICS : 91.220National Ref : MSZ 13017:2012 Készelemes könnyűállványok és elemeikTitle : Light weight prefabricated scaffolding and elements

Relatedness :National : REV/AMD MSZ 13017-1:1983, MSZ 13017-2:1983, MSZ 13017-3:1983, MSZ 13017-4:1983

** End of Subsector **

Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001664/0001 Project EstablishedICS : 23.040.01, 91.140.80National Ref : NEN 3215:2011 Concept nlTitle : Drainage systems inside and outside buildings - Determination methods for drainage

capacity, density and roof-mounted outletsScope : This standard contains specifications and determination methods for drainage systems

inside buildings for the transportation of domestic waste water and rainwater.

Relatedness :National : New

Subsector : B20 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001668/0001 Project EstablishedICS :National Ref : NEN 3650-4:2011 Concept nlTitle : Requirements for pipeline systems - Part 4: ConcreteScope : This standard contains specifications for concrete pipeline systems and is applicable for

pipeline systems on land. For general specifications, see NEN 3650-1.

Relatedness :National : New

Subsector : B20 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001669/0001 Project EstablishedICS :National Ref : NEN 3650-5:2011 Concept nlTitle : Requirements for pipeline systems - Part 5: Additional specifications for cast ironScope : In addition to the general specifications for pipeline systems given in NEN 3650-1 and the

addiotnal specifications given in NEN 3651, this standard contains specifications for cat iron

Page 21

Scope : pipeline systems.

Relatedness :National : New

Subsector : B20 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001670/0001 Project EstablishedICS :National Ref : NEN 3650-3:2011 Concept nlTitle : Requirements for pipeline systems - Part 3: Additional specifications for plastic pipelinesScope : This standard contains specifications for pipeline systems on land. This standard has to be

used together with NEN 3650-1.

Relatedness :National : New

** End of Subsector **

Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2012-02-14Organization : AENORCountry : Spain Latest Date for Comments : 2012-03-25Project ID : P0037351/0002 Draft for public enquiryICS :National Ref : PNE 60404-1:2010/1MTitle : Gaseous fuels. Regulation pressure and/or measurement packages with a maximum

operating pressure up to 5 bar. Part 1: Packages to built in, attach or place in enclosures with an equivalent nominal volume of flow up to 100 m3 (n)/h of natural gas.

Scope : This standard establishes the technical requirements for the design and operation, as well as for testing and the supply conditions of the regulation pressure and/or measurement packages with an equivalent nominal volume of flow up to 100 m³ (n)/h of natural gas, or its equivalent in LPG, and a maximum operating pressure up to 5 bar.

Relatedness :National : REV/AMD UNE 60404-1:2010

Subsector : B25 Registration Date : 2012-02-14Organization : AENORCountry : Spain Latest Date for Comments : 2012-03-25Project ID : P0038734/0001 Draft for public enquiryICS :National Ref : PNE 60411:2009/1MTitle : Gaseous fuels. Pressure regulator with a maximum inlet pressure (MOPe) greater than

0,4 bar and up to 5 bar and a maximum outlet pressure (MOPs) up to 0,4 bar.Scope : This modification introduces a new outlet operating pressure value, changing different

clauses of the standard.

Relatedness :National : REV/AMD UNE 60411:2009

** End of Subsector **

Page 22Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2012-02-10Organization : NSAI Draft Issue Date : 2012-01-31Country : Ireland Latest Date for Comments : 2012-03-23Project ID : 01078886/0001 Project EstablishedICS : 93.080.30National Ref : I.S. 261Title : Cast iron road furniture Scope : Revision of I.S. 261; requirements for cast iron covers and frames for fire hydrants, water

meters, water service connections, sluice valves and stopcocks.

Relatedness :National : REV/AMD I.S. 261

Subsector : B26 Registration Date : 2012-02-08Organization : SNV Draft Issue Date : 2012-02-03Country : Switzerland Latest Date for Comments : 2012-03-19Project ID : CH120004/0001 Draft for public enquiryICS : 93.080.20National Ref : SN 640458Title : Sealing systems and bituminous layers on bridge floors of concrete; determination of

porosity, test standard

Relatedness :National : New

Subsector : B26 Registration Date : 2012-02-17Organization : SNV Draft Issue Date : 2012-02-16Country : Switzerland Latest Date for Comments : 2012-03-29Project ID : CH120005/0001 Draft for public enquiryICS : 93.080.30National Ref : SN 640650Title : Rest areas; Structural design, equipment and maintenance of the rest areas

Relatedness :National : New

Subsector : B26 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177816/0001 Project EstablishedICS :National Ref : PR NF P98-258-1Title : Tests on cold bituminous mixtures - Determination of the cohesion increase - Part 1:

Workabilimeter method

Relatedness :National : New

** End of Subsector **

Subsector B31: HEATING SYSTEMS IN BUILDINGS

Page 23

Subsector : B31 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001665/0001 Project EstablishedICS : 91.140.10National Ref : NEN 3028:2004/A1:2011 Concept nlTitle : Requirements for fuel combustion installationsScope : This is an amendment on NEn 3028:2004..

Relatedness :National : New

** End of Subsector **

Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2012-02-08Organization : MSZT Draft Issue Date : 2012-02-01Country : Hungary Latest Date for Comments : 2012-04-30Project ID : 34800108/0001 Draft for public enquiryICS : 91.010.30National Ref : MSZ 24220:20112 Csoportos öltözők és a kapcsolódó helyiségek tervezési előírásaiTitle : Design provisions for communal changerooms and associated premises

Relatedness :National : REV/AMD MSZ-04-220:1981

Subsector : B33 Registration Date : 2012-02-14Organization : MSZTCountry : HungaryProject ID : 34812302/0001 Project EstablishedICS : 91.080.01National Ref : MSZ 24803-1 Épületszerkezetek megjelenési módjának előírásai. 1. rész: Általános előírásokTitle : Requirements for the appearance of building structural elements. Part 1: General

Relatedness :National : REV/AMD MSZ 24803-1:2010

** End of Subsector **

Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024434/0001 Project EstablishedICS : 03.100.01National Ref : ÖNORM A 7010-1Title : Facility operation - Data structures - Part 1: Information relevant data groupsScope : This Austrian Standard provides rules for required basic geospatial data, update data flows,

data structures and groups of information relevant data. It supports the appropriate use of data, but does not regulate processes. It forms the basis for building object-specific data structures and further data applications in objects. This Austrian Standard applies to the entire life cycle of an object, particularly for object use, and therefore affects all businesses

Page 24

Scope : and organizations that are involved in the construction or operation, such as builders, investors, developers, architects, planners, developers, owners, operators, service providers of facility management, property management and in particular the users of objects. This Austrian Standard is the basis for the development of standards of spacial and object data management, task-specific data repositories (historization) and Information comparisons (benchmarking). Overview-representations of emerging data, according to compatibility, access to intermediate levels in work routines and comparisions of data quantity and cost specific contexts will be easier.

Relatedness :National : New

Subsector : B99 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001671/0001 Project EstablishedICS : 91.120.20National Ref : NEN 5077:2006+C1:2008/A1:2011 Concept nlTitle : Noise control in buildings - Determination methods for performances concerning

airborne sound insulation of facades, airborne sound insulation, impact sound insulation, sound levels caused by technical services and reverberant time

Scope : This document amends NEN 5077:2006+C1:2008.

Relatedness :National : New

Subsector : B99 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001716/0001 Project EstablishedICS : 23.040.01National Ref : NPR 2760:2012 nlTitle : Mutual influence of pipelines and high-voltage circuitsScope : This code of practice describes how the mutual influence of pipelines and high-voltage

circuits is determined in relation to safety and corrosion.

Relatedness :National : New

Subsector : B99 Registration Date : 2012-02-27Organization : UNICountry : ItalyProject ID : 84000950/0001 Project EstablishedICS : 91.100.15National Ref : U84000950Title : Cultural Heritage - Natural and artificial stone - Cyanobacteria and green algae:

techniques of cultivationScope : The document presents coltural techniques commonly used for growth of Cyanobacteria

and Chlorophyceae, colonizing stone materials. For each microbial group are given the composition of culture media, the techniques of preparation, incubation conditions, timing and methods of reading the results.

Relatedness :

Page 25

National : New

Subsector : B99 Registration Date : 2012-02-27Organization : UNICountry : ItalyProject ID : 84000960/0001 Project EstablishedICS : 91.100.15National Ref : U84000960Title : Cultural Heritage - Indoor microbial aerosol surveys - Passive sampling method by

cultural-plate Scope : The norm concerns the method for quali- quantitative detection of viable cultivable

microflora diffused by air in indoor environments by passive sampling. This method consists of exposition of Petri dishes, containing a solid cultural medium; it permits to determine the aerodiffused viable microorganisms may deposit on surfaces by gravity or aerodinamic movements. It is more suitable to detection of heterotrophic cultivable bacteria and microfungi. To process the analyses report, the norm includes a data sheet to collect information on the examined environment and a sheet for monitoring results report.

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 26

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS

Register issued on : 2012-03-02

Page 27Subsector C01: Food products

Subsector : C01 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038855/0001 Project EstablishedICS :National Ref : PNE 155502-2Title : Fresh fruits. Controlled production. Peach tree, nectarine tree, apricot tree, cherry tree,

plum tree and their hybrids produced incorporating biological pest control methods. Series II.

Scope : It describes the specific aspects of an agricultural controlled production system in which biological pest control is a requirement. It is applicable to peach, nectarine, apricot, cherry, plum trees and their hybrids being their fruits for the fresh market.

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038856/0001 Project EstablishedICS :National Ref : PNE 155503-2Title : Fresh fruits. Controlled production. Apple tree, pear tree and quince tree produced

incorporating biological pest control methods. Series II.Scope : It describes the specific aspects of an agricultural controlled production system in which

biological pest control is a requirement. It is applicable to apple tree, pear tree and quince tree, being their fruits for the fresh market.

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : t1012691/0001 Project EstablishedICS :National Ref :Title : Green TeaScope : This standard specifies the green tea.

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst05152/0001 Project EstablishedICS :National Ref :Title : Rear Blades for Land Leveling (for Agricultural Tractors)Scope : This standard applies to land levelling rear blades for agricultural tractors.

Page 28

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst06800/0001 Project EstablishedICS : 67.100.10National Ref :Title : AyranScope : This standard specifies ayran

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst08136/0001 Project EstablishedICS :National Ref :Title : Finger Wheel Rakes (for Tractors)Scope : This standard applies to tractor drawn finger wheel rakes.

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-29Organization : TSECountry : TurkeyProject ID : tst58666/0002 Project EstablishedICS : 67.160.20National Ref :Title : Soft drinksScope : This standard specifies soft drinks.

Relatedness :National : New

Subsector : C01 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst87464/0001 Project EstablishedICS :National Ref :Title : Animal feeds - Horse feedScope : Healthy horses, formulated to meet the daily nutritional needs, ready to be consumed

(pellet, grain, granular or powder form) feeds.

Relatedness :National : New

Page 29

Subsector : C01 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : tst87465/0001 Project EstablishedICS :National Ref :Title : Halal food service and establishments – Guidelines for restaurantsScope : The guideline, according to OIC/SMIIC 1 clause 5.16, specifies requirements for restaurants

(including fast foods),hotels (F & B and buffets), cafes, self-services, ready to east meal sections of süpermarkets, patisseries,etc., and raw materials used in these type of places, meal preparation procedures, personnel responsible for meal preparation, and related tools and utensils.

Relatedness :National : New

** End of Subsector **

Subsector C06: ESSENTIAL OILS

Subsector : C06 Registration Date : 2012-02-09Organization : PKNCountry : PolandProject ID : 00222583/0001 Project EstablishedICS : 75.080National Ref : prPN-C-04375-1Title : Testing of solid and liquid fuels - Determining the gross calorific value using the bomb

calorimeter, and calculation of net calorific value - Part 1: General information, apparatus, methods

Scope : This standard specifies a method of determining the gross calorific value of solid and liquid fuels using a bomb calorimeter and of calculating the net calorific value. It may also be applied to other solid or liquid substances. The gross and net calorific values determined using this standard serve, for example, to calculate energy balances and as a pricing basis. Values are specified here for the gross calorific value at constant volume and for the net calorific value at constant pressure

Relatedness :National : New

Subsector : C06 Registration Date : 2012-02-09Organization : PKNCountry : PolandProject ID : 00222584/0001 Project EstablishedICS : 75.080National Ref : prPN-C-04375-2Title : Testing of solid and liquid fuels -- Determining the gross calorific value by the bomb

calorimeter and calculation of net calorific value -- Part 2: Method using the isoperibol or static-jacket calorimeter

Scope : This standard specifies a method of determining the gross calorific value of solid and liquid fuels using an soperibol or static-jacket calorimeter and of calculating the net calorific value. It may also be applied to other solid or liquid substances

Relatedness :

Page 30

National : New

Subsector : C06 Registration Date : 2012-02-09Organization : PKNCountry : PolandProject ID : 00222585/0001 Project EstablishedICS : 75.080National Ref : prPN-C-04375-3Title : Testing of solid and liquid fuels - Determination of gross calorific value by the bomb

calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacketScope : This standard specifies a method of determining the gross calorific value using an adiabatic

bomb calorimeter and of calculating the net calorific value of solid and liquid fuels. It may also be applied to other solid and liquid substances

Relatedness :National : New

** End of Subsector **

Subsector C09: SURFACTANTS

Subsector : C09 Registration Date : 2012-02-20Organization : PKNCountry : PolandProject ID : 00018552/0001 Project EstablishedICS : 71.100.50National Ref : prPN-C-04906Title : Wood preservatives - General requirements and test methodsScope : The standard describes general requirements and test methods for chemical wood

preservatives used in wood protection against biological danger. The classification of wood preservatives according to the chemical composition and anticipated usage is stated

Relatedness :National : New

** End of Subsector **

Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024477/0001 Project EstablishedICS : 13.080.01National Ref : ÖNORM S 2028Title : Biological treatment of contaminated soilScope : This ÖNORM specifies requirements for the biological ex-situ treatment of contaminated

soils. The aim of this ÖNORM is to ensure that indeed a biological degradation of pollutants (eg hydrocarbons (HC) and polycyclic aromatic hydrocarbons (PAHs)) takes place not only as eg reduction in pollutant concentrations due to dilution.

Relatedness :National : New

Page 31

Subsector : C13 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177886/0001 Project EstablishedICS :National Ref : NF U44-400-1Title : Mulching - Designations, specifications and marking - Part 1: Organic and mineral

mulching in particule

Relatedness :National : New

** End of Subsector **

Subsector C17: TREES AND PLANTS

Subsector : C17 Registration Date : 2012-02-16Organization : SUTNCountry : SlovakiaProject ID : 48200112/0001 Project EstablishedICS : 65.020.99, 65.060.80National Ref : STN 48 2210Title : Silviculture. Afforestation and maintainance of young plantation and young growthScope : The object of the standard is to define terms in this area according to IUFRO vocabulary, to

determine the standard consumption of seedlings material and requirements on maintainance of young plantation and young growth.

Relatedness :National : New

** End of Subsector **

Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024476/0001 Project EstablishedICS : 13.310, 13.340.20National Ref : ÖNORM S 1315Title : Bullet-resistant helmet with visor and neck protection - Requirements, classifications

and test methods

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 32

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector F : FUNDAMENTAL STANDARDS

Register issued on : 2012-03-02

Page 33Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2012-02-08Organization : TSECountry : TurkeyProject ID : 0t113298/0001 Project EstablishedICS : 01.140.20National Ref :Title : Electronic records management Scope : This standard covers the following subjects in order to protect the electronic documents

that are generated and/or that can be generated by establishments: a) System requirements for electronic document management system (EDMS), b) Document management techniques and applications needed for EDMS, c) Requirements for management of electronic documents, d) Requirements for performing management functions of documents not generated in electronic medium, e) Diplomatic features required in electronic documents, f) Requirements for preserving legal validity of electronic documents, g) Definition of required system infrastructure for secure signature and stamp systems application.

Relatedness :National : New

Subsector : F07 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001640/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-1:2011 Concept nlTitle : Business records - Part 1: GeneralScope : This national technical agreement deals with business records. This is a general part, the

series consists of several parts.

Relatedness :National : New

Subsector : F07 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001641/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-2:2011 Concept nlTitle : Business records - Part 1: GeneralScope : The business record contains relevant and actual information of laws and regulations which

are relevant to businesses. The purpose of this technical agreement is to describe and establish the link between the business record and the regulation assistance.

Relatedness :National : New

Subsector : F07 Registration Date : 2012-02-23Organization : NENCountry : Netherlands

Page 34

Project ID : 50001642/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-4:2011 Concept nlTitle : Business records - Part 4: InspectionScope : When an entrepeneur makes through a business record actual information concerning

compliance available, it's easier for the supervisors to get a complete view of law and regulations.

Relatedness :National : New

Subsector : F07 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001643/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-3:2011 Concept nlTitle : Business records - Part 3: Reporting and requestScope : The purpose of this technical agreement is the description and consistent establishment of

the linking between applications of the authorized bodies and the business records.

Relatedness :National : New

Subsector : F07 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001644/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-5:2011 Concept nlTitle : Business records - Part 5: Business applicationsScope : The purpose of this technical agreement is the description and consistent establishment of

the linking between applications of the company and the business records.

Relatedness :National : New

** End of Subsector **

Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES

Subsector : F14 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024454/0001 Project EstablishedICS : 87.080National Ref : ÖNORM A 1203Title : Testing of prints and printing inks - Resistance to defined solventsScope : The test method specified in this Austrain standard refers to checking the resistance of

print and printing inks to solvents that meet the definition in this standard. The test includes prints on all printing substrates carried out in any printing process but also for printing inks on standardized test prints according to ÖNORM A 1200-1. Excluded from the scope of this standard is the test on the durability of the paint and varnishes because this

Page 35

Scope : can only be determined by tests in practice.

Relatedness :National : New

Subsector : F14 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 01700027/0001 Project EstablishedICS : 87.080National Ref : DIN 16526Title : Printing inks for graphic technology - Labelling of properties of sheetfed offset inks

Relatedness :National : New

** End of Subsector **

Subsector F16: GRAPHICAL SYMBOLS

Subsector : F16 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0039027/0001 Project EstablishedICS :National Ref : PNE 23033Title : Fire safety. SignallingScope : This standard includes the safety signs used in fire safety.

Relatedness :National : REV/AMD UNE 23033-1:1981

** End of Subsector **

Subsector F17: ADMINISTRATIVE DOCUMENTS

Subsector : F17 Registration Date : 2012-02-23Organization : TSECountry : TurkeyProject ID : tst18002/0001 Project EstablishedICS : 13.100National Ref :Title : Occupational health and safety management systems- Guidelines for the

implementation of TS 18001Scope : This standard seeks to explain the underlying principles of TS 18001.

Relatedness :National : NewEuropean : Modified BS OHSAS 18002:2008

** End of Subsector **

Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2012-02-09Organization : ASI

Page 36

Country : AustriaProject ID : 00024483/0001 Project EstablishedICS : 03.100.40National Ref : ÖNORM ISO 21500Title : Guidance on project managementScope : This International Standard provides overarching guidance for project management. This

International Standard may be used by any type of organization, including public, private or community organizations, and to any type of project, irrespective of complexity, size, or duration. This International Standard provides a high-level description of the concepts and processes that are considered to form sound practice in project management. This International Standard places projects in the context of programmes and project portfolios. It does not provide detailed guidance on the management of programmes and project portfolios. Topics pertaining to general management disciplines are addressed only as they relate to project management.

Relatedness :National : New

Subsector : F20 Registration Date : 2012-02-27Organization : UNICountry : ItalyProject ID : 27000860/0001 Project EstablishedICS : 03.120.10National Ref : U27000860Title : Quality management system - Guidelines for the application of UNI EN ISO 9001:2008

in librariesScope : This technical report specifies general guidelines, based on good practice developed in the

appropriate context, to assist libraries developing a consistent approach to quality management. It aims to make the principles of UNI EN ISO 9001:2008 more comprehensible for the personnel involved in libraries, stimulating and assisting the adoption of this standard by those organizations.

Relatedness :National : New

Subsector : F20 (Secondary Subsector)

Registration Date : 2012-02-23

Organization : TSECountry : TurkeyProject ID : tst18002/0001 Project EstablishedICS : 13.100National Ref :Title : Occupational health and safety management systems- Guidelines for the

implementation of TS 18001Scope : This standard seeks to explain the underlying principles of TS 18001.

Relatedness :National : NewEuropean : Modified BS OHSAS 18002:2008

** End of Subsector **

Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK

Subsector : F21 Registration Date : 2012-02-23

Page 37

Organization : EVSCountry : EstoniaProject ID : 00106938/0001 Project EstablishedICS : 03.060, 91.040, 93.010National Ref : prEVS 875-8Title : Property valuation - Part 8: Cost approachScope : The standard series EVS 875 applies to property valuation. These standards are to be used

for valuation activitises and using valuations, especially for activities dealing with lending and financial reporting. The users of these standards are real estate specialists, construction specialists, environment specialists, financial reporting specialists (accountants, auditors), credit institutions, higher edukation institutions. These standards create a basis for unified approach to property valuation, satisfying the needs of private and public sector. EVS 875-8 gives the objectives and possibilities of using the cost approach. It covers the valuation of land and buildings, finding the depreciation and separating the value of land and buildings.

Relatedness :National : REV/AMD EVS 875-8:2007

Subsector : F21 Registration Date : 2012-02-23Organization : EVSCountry : EstoniaProject ID : 00106939/0001 Project EstablishedICS : 03.060, 91.040, 93.010National Ref : prEVS 875-9Title : Property valuation - Part 9: Income Approach Scope : The standard series EVS 875 applies to property valuation. These standards are to be used

for valuation activitises and using valuations, especially for activities dealing with lending and financial reporting. The users of these standards are real estate specialists, construction specialists, environment specialists, financial reporting specialists (accountants, auditors), credit institutions, higher edukation institutions. These standards create a basis for unified approach to property valuation, satisfying the needs of private and public sector. EVS 875-9 covers the usage of income approach when finding the market value, the value in use and the investment value. It also covers financial modelling, investment analysis, income elements in cash flow, cost elements in cashflow, income capitalisation method, discount rate, capitalisation rate, internal rate of return, net present value, cash flow before and after taxation and loans in cash flow.

Relatedness :National : REV/AMD EVS 875-9:2007

** End of Subsector **

** End of Sector **

Information procedure Page 38

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE

Register issued on : 2012-03-02

Page 39Subsector H07: SPACE HEATING

Subsector : H07 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177815/0001 Project EstablishedICS :National Ref : PR NF E38-424Title : Wet cooling towers - Terminology and design requirements considering the hazard of

the legionellosis

Relatedness :National : REV/AMD XP E38-424:201004 (E38-424)

** End of Subsector **

Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)

Subsector : H33 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038901/0001 Project EstablishedICS :National Ref : PNE 59530Title : Footwear materials. Soling. Preparation of test pieces for physical testing.Scope : It specifies the general procedures for preparation of test samples of components of

footwear for physical test.

Relatedness :National : REV/AMD UNE 59530:1994

Subsector : H33 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038902/0001 Project EstablishedICS :National Ref : PNE 59532Title : Footwear materials. Soling. Determination of flexing resistance on test pieces.Scope : It describes a method for determining the resistance of the soling materials to a cut growth,

as a result of the flexing stress.

Relatedness :National : REV/AMD UNE 59532:1994

Subsector : H33 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038903/0001 Project EstablishedICS :National Ref : PNE 59900Title : Footwear. Men's footwear. Specifications and test methods.Scope : It establishes the minimum requirements and the test methods regarding the basic

characteristics which men's footwear should fulfil.

Page 40

Relatedness :National : REV/AMD UNE 59900:1999

Subsector : H33 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038905/0001 Project EstablishedICS :National Ref : PNE 59910Title : Footwear. Women's footwear. Specifications and test methods.Scope : It establishes the minimum requirements and the test methods regarding the basic

characteristics which women's footwear should fulfil.

Relatedness :National : REV/AMD UNE 59910:1999

Subsector : H33 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038906/0001 Project EstablishedICS :National Ref : PNE 59920Title : Footwear. School shoes footwear. Specifications and test methods.Scope : It establishes the minimum requirements and the test methods regarding the basic

characteristics which school shoes should fulfil.

Relatedness :National : REV/AMD UNE 59920:1999

Subsector : H33 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038907/0001 Project EstablishedICS :National Ref : PNE 59930Title : Footwear. Leisure footwear. Specifications and test methods.Scope : It establishes the minimum requirements and the test methods regarding the basic

characteristics which leisure footwear should fulfil.

Relatedness :National : REV/AMD UNE 59930:1999

** End of Subsector **

** End of Sector **

Information procedure Page 41

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector I : MECHANICAL ENGINEERING

Register issued on : 2012-03-02

Page 42Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2012-02-03Organization : SFS Draft Issue Date : 2011-12-20Country : Finland Latest Date for Comments : 2011-03-15Project ID : 0000E282/0001 Draft for public enquiryICS :National Ref :Title : Pressure vessels. Installation, accessories and operation

Relatedness :National : New

** End of Subsector **

Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038887/0001 Project EstablishedICS :National Ref : PNE 16509Title : Assembly tools for screws and nuts. Square drive extension hexagon insert, for power

socket wrenches.Scope : This standard specifies dimensions and hardness of square drive extension hexagon insert

for power socket wrenches corresponding to number 402 of UNE 16500

Relatedness :National : NewInternational : Not Equivalent to ISO 3317:2009

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038888/0001 Project EstablishedICS :National Ref : PNE 16513Title : Assembly tools for screws and nuts. Single. Head engineer's wrenches. Characteristics

and tests methods.Scope : It establishes the characteristics of the single head engineer's wrenches, according to

number 1 of UNE Standard 16500.

Relatedness :National : REV/AMD UNE 16513:1997International : Not Equivalent to ISO 4229:2009

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038889/0001 Project EstablishedICS :National Ref : PNE-ISO 8764-1Title : Assembly tools for screws and nuts -- Screwdrivers for cross-recessed head screws --

Part 1: Driver tipsScope : This standard specifies the shapes and dimensions, technical requirements and torque test

Page 43

Scope : methods for the tips of hand drivers and of machine-operated bits for cross-recessed head screws. It specifies two forms of driver tips: form PH for form H recesses and form PZ for form Z recesses. (H and Z form recesses are specified in ISO 4757, while general requirements, lengths of blades and marking of hand-operated screwdrivers are given in ISO 8764-2.)

Relatedness :National : REV/AMD UNE 16520-1:2001

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038890/0001 Project EstablishedICS :National Ref : PNE 16515Title : Assembly tools for screws and nuts -- Double-headed open-ended wrenches, double-

headed box wrenches and combination wrenches -- Maximum widths of headsScope : This standard specifies the maximum outside head dimensions for double-headed open-

ended wrenches, double-headed ring wrenches and combination wrenches

Relatedness :National : REV/AMD UNE 16515:1991International : Not Equivalent to ISO 3318:2009

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038891/0001 Project EstablishedICS :National Ref : PNE 16548Title : Cutting tools for tubes. Tube cutters for steel tubes. Technical specifications and tests.Scope : This standard specifies the nomenclature , specifications and tests for steel tube cutters.

Relatedness :National : REV/AMD UNE 16548:2000

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038892/0001 Project EstablishedICS :National Ref : PNE 16551Title : Assembly tools for pipes. Pipe wrenches curved pattern. Technical specifications and

tests.Scope : This standard fixes the nomenclature, measurement and capacity, hardness in the ends,

finishing and testing of pipe wrenches, curved pattern, which are used for pipe handling.

Relatedness :National : REV/AMD UNE 16551:2001

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : Spain

Page 44

Project ID : P0038893/0001 Project EstablishedICS :National Ref : PNE 16609-1Title : Hoes. Part 1: Hoes with hammer. Technical specifications.Scope : This standard specifies the dimensions, technical specifications and geometry of hoes with

hammers.

Relatedness :National : REV/AMD UNE 16609-1:2001

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038895/0001 Project EstablishedICS :National Ref : PNE 16609-2Title : Hoes. Part 2: Carpenter's hoes. Technical specifications.Scope : This standard is to fix the technical specifications, head geometry and dimensions

correspondents to carpenter's hoes.

Relatedness :National : REV/AMD UNE 16609-2:2000

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038897/0001 Project EstablishedICS :National Ref : PNE 16588Title : Striking tools. Hammers, mallets and allied tools. Technical specifications and tests.Scope : This standard specifies the specifications, tests and marking of the hammers, mallets and

allied tools.

Relatedness :National : REV/AMD UNE 16588:2001International : Not Equivalent to ISO 15601:2000

Subsector : I09 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038898/0001 Project EstablishedICS :National Ref : PNE 16590-4Title : Striking tools. Hammers, mallets and allied tools. Part 4: Mallets.Scope : This standard specifies the types, dimensions, designation and marked of mallets.

Relatedness :National : REV/AMD UNE 16590-4:2001

** End of Subsector **

Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)

Page 45

Subsector : I17 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst03840/0001 Project EstablishedICS : 13.110National Ref :Title : General Safety Rules Against Occupational Accidents in MachineryScope : This standard covers the general safety rules agains, accupational accidents in machinary.

Relatedness :National : NewInternational : Modified PD 5304:2005

** End of Subsector **

Subsector I18: MINING

Subsector : I18 Registration Date : 2012-02-20Organization : PKNCountry : PolandProject ID : 00022746/0001 Project EstablishedICS : 73.020National Ref : prPN-G-02100Title : Opencast mining -- Threat strip and protective strip of round open pits -- Application and

widthScope : This standard specifies application of threat strip and protective strip as well as widths of

these strips along the edge of pit against the danger connected with mining operation or post mining and protection of pit against dangers connected with stationary objects use

Relatedness :National : New

Subsector : I18 Registration Date : 2012-02-09Organization : PKNCountry : PolandProject ID : 00027598/0001 Project EstablishedICS : 01.080.30, 73.020National Ref : prPN-G-09009Title : Mine maps -- Ventilation conventional marksScope : Describes ventilation coventional marks that are applied to mine maps, especially mine

headings maps

Relatedness :National : New

** End of Subsector **

Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024461/0001 Project EstablishedICS : 13.280National Ref : ÖNORM S 5222-1Title : Sealed radioactive sources - Part 1: Requirements and classification, type testing

Page 46

Scope : This Austrian Standard specifies a classification system for sealed radioactive sources and general requirements, stress tests, production test, marking and certification. This Austrian Standard provides a series of tests enabling the producer of sealed radioactive sources to determine the product safety at use and enabling the user of such sources to choose the type for the intended use. Type testings are grouped in different classes und cover e.g. testing of temperature resistance and of mechanical stress. Type testings of sources with radioactive gases are covered in ÖNORM S 5222-4.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024462/0001 Project EstablishedICS : 13.280National Ref : ÖNORM S 5222-2Title : Sealed radioactive sources - Part 2: Leakage test methods for periodical inspectionsScope : This Austrian Standard applies for leak testing of sealed radioactive sources during their

time of use and storage. Recurrent tests and tests after more immoderate stress or at other suspicion of leakage of the hull are covered as well. Leak testing of sealed radioactive sources for which special criteria apply (e.g. radionuclid batteries) are not within the scope of this Austrian Standard. For leak testing of sources with radioactive gases tritium and Kr-85 ÖNORM S 5222-4 apply. The purpose of this Austrian Standard is the specification of the test method to controll the tightness of the emitter and to take safety measures in the case of leakiness.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024463/0001 Project EstablishedICS : 13.280National Ref : ÖNORM S 5222-3Title : Sealed radioactive sources - Part 3: Maximum permissible time intervals for periodical

inspectionsScope : In this Austrian Standard time intervals for recurrent leak testings of sealed radioactive

sources subject to permit according to radiation protection law and having an activitiy up to 500 TBq are specified. Leak testing of sealed radioactive sources having special criteria (z.g. radionuclid batteries) are out of the scope of this Austrian Standard. This Austrian Standard serves the purpose to determine the time interval between to two sequent leak tests considering the characteristics for use, constitution of the hull or of the embedding as well as the activity and exemption limit of the nuclid according to Annex A.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : Austria

Page 47

Project ID : 00024464/0001 Project EstablishedICS : 13.280National Ref : ÖNORM S 5222-4Title : Sealed radioactive sources - Part 4: Requirements for sources containing radionuclides

in gaseous formScope : This Austrian Standard can be used for the production and use of sealed radioactive

sources with gaseous tritium or Kr-85. This Austrian Standard serves the purpose to provide uniform criteria for the assessment of the safe use of sealed radioactive sources with gaseus radioactive substances. Special attention is paid to the characterstics of the physical state of the radioactive substance and the special type of the hull regarding its thermal and mechanical stress.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024474/0001 Project EstablishedICS : 11.040.50National Ref : ÖNORM S 5240-10Title : Image quality assurance in X-ray diagnosis - Part 10: Acceptance testing in radiographic

and fluoroscopic X-ray systems - Limit valuesScope : This Austrian Standard shall be used for the evaluation of acceptance testings in

conjunction with ÖVE/ÖNORM EN 61223-3-1 of the following medical diagnostic X-ray equipment and auxiliary devices: Equipment for radiography (e.g. stationary X-ray system, mobile X-ray system, head X-ray system, chest X-ray system, tomography but excluding computertomography, cradle (spot-film device) in fluoroscopy devices, angigraphy (free from DSA function), cinematography), equipment in X-ray fluoroscopy including combined radiography and fluoroscopy. This Austrian Standard applies for the testing of the X-ray generation and auxiliary devices for digital systems. This Austrian Standard does not apply for the testing of the digital image acquisition and image processing at the diagnostic X-ray equipment mentioned above. For the acceptance testing of X-ray projection radiography devices with digital image receptor systems ÖNORM S 5240-18 has to be used additionally. This Austrian Standard does not apply for mammography X-ray equipment, for radiation therapy simulators and for dental X-ray equipment.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024475/0001 Project EstablishedICS : 11.040.50National Ref : ÖNORM S 5240-21Title : Image quality assurance in diagnostic X-ray departments - Part 21: Acceptance and

constancy test of image display systems in theirs environmentScope : This Austrian Standard includes indicators for the acceptance and constancy testing of

image display systems, specifies testing methods and determines limit values as well as test intervals. This Austrian Standard applies to medical image display systems for diagnosis and treatment displaying picture information on image display devices for colour and grey scale display provided they are adjusted in complinace with GSDF. It takes black-white and colour image display devices as used in medical diagnostic procedures and in combination with

Page 48

Scope : PCAS.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024482/0001 Project EstablishedICS : 13.030.30, 13.280National Ref : ONR 192606Title : Handling with radioactive sources - Documentation of the activity flow in a facilityScope : This ONR specifies the requirements on the documentation of the flow of activity in those

plant, in which open radioactive substances being subjet to permit are handled. The documentation of the overall operational flow of activities provides evidence that the handling including the disposal of radioactive waste happens duly.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177745/0001 Project EstablishedICS :National Ref : PR NF M60-760Title : Nuclear Energy - Measurement of radioactivity in the environment - Air - Sampling of

aerosols for measurement of radioactivity in the environment

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177806/0001 Project EstablishedICS :National Ref : FD NF M60-780-0Title : Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part

0: General guide for sampling of bioindicators in environment

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177807/0001 Project EstablishedICS :National Ref : PR NF M60-780-3Title : Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part

3: Sampling of biological indicators from marine environment.

Page 49

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177808/0001 Project EstablishedICS :National Ref : PR NF M60-780-1Title : Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part

1 : Sampling of bioindicators from the earth environment.

Relatedness :National : New

Subsector : I19 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177809/0001 Project EstablishedICS :National Ref : PR NF M60-780-4Title : Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part

4 : Glossary

Relatedness :National : New

** End of Subsector **

Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038875/0001 Project EstablishedICS :National Ref : PNE 100716Title : Measurement and quantification of the outer surface of the air ducts of rectangular sheet

metalScope : This standard establishes a method for measuring the surface to quantify the unit of

measurement to be used in air duct sheet metal, also including parts. As the total surface is to be understood through the outer surface of the finished surface more specific cross joints. This standard is applicable to rectangular ducts and their components, used in ventilation and air conditioning. This standard is intended to fill the gap in the existing standards taking into account the current manufacturing methods, collecting the measurement criteria used in the Spanish market in recent decades. Not subject to this standard definition of the inner dimensions of pipes, such treaties in the UNE-EN 1505. Nor is the subject of this standard the determination of leakage air flow per unit area of the ducts (sealing factor), being necessary to use the UNE-EN 14239.

Relatedness :National : New

Page 50** End of Subsector **

Subsector I34: NON-FERROUS METALLIC PIPES

Subsector : I34 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 05401384/0001 Project EstablishedICS :National Ref : 05401384Title : Pressure pipelines made from thermoplastics materials - Metal and plastics

compression fittings for polyethylene (PE) pipes - General quality requirements and testing

Relatedness :National : New

** End of Subsector **

Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001631/0001 Project EstablishedICS : 13.100, 13.300, 71.100.20National Ref : NTA 7498:2011 Concept nlTitle : Toxic gases in import containers - Equipment for gas measurementsScope : This technical agreement describes the reqirements for gas measurement equipment.

Relatedness :National : New

Subsector : I99 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001632/0001 Project EstablishedICS : 13.100, 13.300, 71.100.20National Ref : NTA 7499:2011 Concept nlTitle : Toxic gases in import containers - Chain of safetyScope : This technical agreement describes the safety aspects of the routing of a shipping container.

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 51

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector M : METALLIC MATERIALS

Register issued on : 2012-03-02

Page 52Subsector M01: STEEL

Subsector : M01 Registration Date : 2012-02-23Organization : PKNCountry : PolandProject ID : 00014641/0001 Project EstablishedICS : 45.080National Ref : prPN-H-93470Title : Hot rolled steel shapes for the fishplate production and fishplates for standard-gauge

trackScope : Specifies general requirements, tests and dimensions for hot rolled sections made of steels

for the fishplate production and fishplates for railway rails

Relatedness :National : New

** End of Subsector **

Subsector M04: COPPER

Subsector : M04 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177755/0001 Project EstablishedICS :National Ref : PR NF A06-756Title : Chemical analysis of copper alloys - determination of manganese - Volumetric method

Relatedness :National : New

Subsector : M04 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177756/0001 Project EstablishedICS :National Ref : PRNF A06-750Title : Chemical analysis of copper alloys - Determination of nickel content - Gravimetric

method

Relatedness :National : New

Subsector : M04 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177764/0001 Project EstablishedICS :National Ref : PR NF A06-720Title : Chemical analysis of copper and copper alloys - Determination of arsenic -

Spectrophotometric method

Relatedness :National : New

Page 53** End of Subsector **

Subsector M05: WELDING

Subsector : M05 Registration Date : 2012-02-28Organization : SIS Draft Issue Date : 2012-02-27Country : Sweden Latest Date for Comments : 2012-04-27Project ID : 00064004/0001 Project EstablishedICS :National Ref : 64004Title : Consequence classes for welded constructionsScope : This standard includes a description of the consequence classes and how they should be

provided to inform of the seriousness and sensitivity of a welded construction. A weld should always meet all the requirements specified for the joint in question, regardless or consequende class.

Relatedness :National : New

Subsector : M05 Registration Date : 2012-02-27Organization : UNICountry : ItalyProject ID : 28000290/0001 Project EstablishedICS : 23.040.20National Ref : U28000290Title : Specification and qualification of welding procedures (WPS) for thermoplastic materials.

- WPS for electrofusion and heated tool butt welding.Scope : The standard specifies the technical variables to be specified and included in a Welding

Procedure Specification (WPS) for joints of polyethylene elements obtained by electrofusion and heated tool butt welding. The standard integrates and defines the preparation test method in accordance with ISO 11413 and ISO 11414 as regards the manufacturing and can be used as provided in the UNI EN 12007-2. The variables specified in this standard are those that affect the quality of the welded joint.

Relatedness :National : New

Subsector : M05 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177887/0001 Project EstablishedICS :National Ref : NF A80-200-1Title : Welding - Qualification of welders and of armour plating welding operators - Part 1 :

steels

Relatedness :National : New

Subsector : M05 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177888/0001 Project EstablishedICS :

Page 54

National Ref : NF A36-800-3Title : Hot rolled, weldable steel sheets for armowing - Part 3 : anmunition characteristics and

maximum protection velocities

Relatedness :National : New

Subsector : M05 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177889/0001 Project EstablishedICS :National Ref : NF A36-800-2Title : Hot-rolled weldable steel sheets for armouring - Part 2 : ballistic tests

Relatedness :National : New

Subsector : M05 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177890/0001 Project EstablishedICS :National Ref : NF A36-800-1Title : Hot-rolled weldable steel sheets for amouring - Part 1 : technical delivery conditions

Relatedness :National : New

Subsector : M05 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177891/0001 Project EstablishedICS :National Ref : NF A80-200-2Title : Welding - Qualification of welders and of armour plating welding operators - Part 2 :

aluminium

Relatedness :National : New

** End of Subsector **

Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177883/0001 Project EstablishedICS :National Ref : NF A50-800-3Title : Hot rolled weldable aluminium sheets for armowing - Part 3 : anmunition characteristics

and maximum velocities for protection

Page 55

Relatedness :National : New

Subsector : M08 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177884/0001 Project EstablishedICS :National Ref : NF A50-800-2Title : Hot-rolled weldable aluminium sheets for armouring - Part 2 : firing tests method

Relatedness :National : New

Subsector : M08 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177885/0001 Project EstablishedICS :National Ref : NF A50-800-1Title : Hot-rolled weldable aluminium sheets for armouring - Part 1 : technical delivery

conditions

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 56

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector N : NON-METALLIC MATERIALS

Register issued on : 2012-03-02

Page 57Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2012-02-08Organization : SUTNCountry : SlovakiaProject ID : 65201112/0001 Project EstablishedICS : 75.100National Ref : STN 65 6304Title : Lubricating grease - Determination of mechanical impurities and inorganic fillersScope : The standard will specify a procedure for determination of mechanical impurities and

inorganic additives content in lubricating grease and relative products. The test will determine presence and nature of the impurities and inorganic additives.

Relatedness :National : REV/AMD STN 65 6304

Subsector : N03 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : t3012820/0001 Project EstablishedICS : 75.200National Ref :Title : Petrol filling stations - Safety requirements Scope : This standard specifies safety requirements for petrol filling stations..

Relatedness :National : New

Subsector : N03 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst05854/0001 Project EstablishedICS : 75.160.20National Ref :Title : Determination of acidity in aviation turbine fuel.Scope : This standard specifies a method for the determination of acidity in aviation fuel.

Relatedness :National : NewInternational : Modified ASTM D 3242:2011

Subsector : N03 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst06568/0001 Project EstablishedICS : 75.080National Ref :Title : Determining the density and relative density (Specific Gravity) of pure hydrocarbons and

petroleum destillates by Bingham pycnometer Scope : This standard specifies a method for determining the density and relative density (Specific

Gravity) of pure hydrocarbons and petroleum destillates by Bingham pycnometer .

Relatedness :National : New

Page 58

International : Modified ASTM D1217:2007

Subsector : N03 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : tst06569/0001 Project EstablishedICS : 75.080National Ref :Title : Determination of kinematic viscosity of volatile and reactive liquids Scope : This standard specifies a method for tetermination of kinematic viscosity of volatile and

reactive liquids

Relatedness :National : NewInternational : Modified ASTM D4486:2010

Subsector : N03 Registration Date : 2012-02-23Organization : TSECountry : TurkeyProject ID : tst88003/0001 Project EstablishedICS : 75.100National Ref :Title : Determination of Cooling Characteristics of Quench oils By Cooling Curve Analysis Scope : This standard specifies a method for the determination of cooling characteristics of quench

oils bu cooling curve analysis.

Relatedness :National : NewInternational : Modified ASTM D 6200: 2007

** End of Subsector **

Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024495/0001 Project EstablishedICS : 79.040National Ref : ÖNORM DIN 4074-1Title : Strength grading of wood - Part 1: Coniferous sawn timberScope : This Austrian Standard specifies grade marks and grade classes as a basis for the definition

of the bearing strength and serviceability of sawn timber.

Relatedness :National : New

** End of Subsector **

Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 05401381/0001 Project EstablishedICS : 83.080.20

Page 59

National Ref : DIN 16941Title : Thermoplastics extruded profiles - General tolerances of size, form and orientation

Relatedness :National : New

** End of Subsector **

Subsector N11: WOOD-BASED PANELS

Subsector : N11 Registration Date : 2012-02-16Organization : TSECountry : TurkeyProject ID : t2011673/0001 Project EstablishedICS : 97.040.20National Ref :Title : PansScope : This standard includes industrial type stainless steel pans which are used in the large

kitchens for food cooking. the nominal capacity of the pans are from 100 liter to 600 lites.

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 60

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT

Register issued on : 2012-03-02

Page 61Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2012-02-07Organization : HZNCountry : CroatiaProject ID : 00556142/0003 Published StandardICS : 13.340.60National Ref : HRN 1131Title : Personal protectiv equipment against falls from a height - Steel Climbing Devices for

Wooden Posts

Relatedness :National : New

Subsector : S04 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA178059/0001 Project EstablishedICS :National Ref : NF S 74-567Title : Protective clothing - Visibility hunting clothing and textile articles - Requirements and

test methods

Relatedness :National : New

** End of Subsector **

Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024460/0001 Project EstablishedICS : 13.040.01National Ref : ÖNORM M 9491Title : Report for olfaktometric measurements - Requirements for the preperationScope : This ÖNORM specifies requirements for a transparent and consistent documentation of

olfactometry measurements.

Relatedness :National : New

Subsector : S08 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024494/0001 Project EstablishedICS : 13.040.01National Ref : ONR 19412-1Title : Guidance for the Application of ÖNORM M 9412-1 for plants in the scope of the EG-K

and EMV-LScope : This field guide defines additional requirements for the parameterization of evaluation

equipment for continuous measurement of the emission of air contaminants for plants in the scope of EG-K and EMV-L and ensures a consistent implementation of the requirements

Page 62

Scope : of the ÖNORM M 9412-1:2008.

Relatedness :National : New

Subsector : S08 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001633/0001 Project EstablishedICS : 13.040.99National Ref : NTA 9055:2011 Concept nlTitle : Online electronic emission monitoring - Odour pollution and safetyScope : The e-nose is used for emission monitoring of odour emissions. This e-nose maps the

effects on surroundings of occasional emissions. The e-nose is used for quick and effective tracing of pollution and the gathering of safety information. Specifications of the e-nose for remote monitoring are also described.

Relatedness :National : New

Subsector : S08 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001710/0001 Project EstablishedICS : 13.040.40National Ref : NEN 8014:2012 Concept nlTitle : Air quality - Stationary source emissions - Sample treatment chain: field, transport

laboratoryScope : This standard describes the stationary source emissions obtained during emission

measurement up to laboratory treatment and analysis.

Relatedness :National : New

Subsector : S08 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001715/0001 Project EstablishedICS : 13.040.20National Ref : NPR 2799:2012 Concept nlTitle : Air quality - Ambient air - Determination of the concentration of carbon disulfide -

GaschromatographyScope : This code of practice describes the determination method of carbon disulfide in ambient

air using gaschromatografy.

Relatedness :National : New

** End of Subsector **

Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2012-02-23

Page 63

Organization : NENCountry : NetherlandsProject ID : 50001662/0001 Project EstablishedICS : 07.100.20, 13.060.70National Ref : NPR 6268:2011 Concept nlTitle : Water - General principles for quality assurance of bacteriological examination of waterScope : This code of practice describes a number of general principles for applying at the

formulating and improving of a quality system in laboratories for the bacteriological examination of water, in addition to the general principles of quality assurance in laboratories. The code of practice is meant to be used by laboratories and certification bodies and aims to give information as well as to promote standardisation.

Relatedness :National : New

Subsector : S09 Registration Date : 2012-02-29Organization : SNV Draft Issue Date : 2012-02-28Country : Switzerland Latest Date for Comments : 2012-05-14Project ID : CH120006/0001 Draft for public enquiryICS : 91.140.60National Ref : SIA 385/2Title : Systems for domestic hot water in buildings - hot water needs, requirements and overall

design

Relatedness :National : New

Subsector : S09 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177805/0001 Project EstablishedICS :National Ref : NF P41-650Title : Water treatment devices - water filter jug

Relatedness :National : New

** End of Subsector **

Subsector S13: ERGONOMICS

Subsector : S13 Registration Date : 2012-02-23Organization : NENCountry : NetherlandsProject ID : 50001630/0001 Project EstablishedICS : 13.100, 13.300, 71.100.20National Ref : NTA 7497:2011 Concept nlTitle : Toxic gases in import containers - Requirements for gas measurements and degasingScope : This technical agreement describes a method of gas measurement in import containers. The

way of degasing of containers is also described.

Relatedness :National : New

Page 64

Subsector : S13 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177817/0001 Project EstablishedICS :National Ref : NF X35-119Title : Ergonomics - Repetitive handling at high frequency - Analysis methodology and

threshold values of biomechanical stress of the upper limbs during

Relatedness :National : New

Subsector : S13 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177818/0001 Project EstablishedICS :National Ref : NF X35-702Title : Safety of machinery - Ergonomic principles for the conception of cabins sorting dry

recyclable waste from household and similar separate collections

Relatedness :National : New

** End of Subsector **

Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2012-02-27Organization : UNICountry : ItalyProject ID : 53002460/0001 Project EstablishedICS : 13.030.40National Ref : U53002460Title : Greenhouse gas - Specification to set up the national system for the carbon credit

voluntary market management arising from projects of greenhouse gas emission reduction or removal enhancement.

Scope : The standard contain the minimum requirements for: - GHG emission reduction or removal enhancement programmes; - validation and verification activities for GHG emission reduction or removal enhancement projects; - carbon credits national register arising from GHG emission reduction or removal enhancement programmes.

Relatedness :National : New

** End of Subsector **

Subsector S22: ENERGY SAVING

Subsector : S22 Registration Date : 2012-02-08Organization : NEN

Page 65

Country : NetherlandsProject ID : 50001706/0001 Project EstablishedICS : 27.190, 75.160.01National Ref : NTA 8081:2011-08 Concept nlTitle : Certification scheme for sustainably produced biomass for energy purposes (version

1.3)Scope : The NTA 8081 describes the certification scheme for sustainably produced biomass for

energy applications. The NTA 8010 includes inter alia a reference to the verifiable requirements of the NTA 8080, the organisation of conformity assessment, and the requirements to the certification body to be able to certify.

Relatedness :National : New

** End of Subsector **

Subsector S23: PERSONAL & PROPERTY PROTECTION AGAINST AGGRESSION/ BURGLARY

Subsector : S23 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001709/0001 Project EstablishedICS : 13.310, 91.060.10, 91.060.50National Ref : NEN 5087:2012 Concept nlTitle : Burglary security of dwellings - Accessibility of roof elements and facade elements:

doors, windows and framesScope : This standard determines the accessibility of windows, doors and frames in relationship to

burglary buildings. This standard is applicable to dwellings; dwellings have to be protected against burglary.

Relatedness :National : New

** End of Subsector **

Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001711/0001 Project EstablishedICS : 13.080.01National Ref : NEN 5707:2012 Concept nlTitle : Soil - Investigation, sampling and analysis of asbestos in soilScope : This standard describes a method for the determination of the asbestos concentration in

soil and can be used for all kinds of pollution with asbestos, like: asbestos cement and softboard, isolation materials and asbestos fibres.

Relatedness :National : New

Subsector : S24 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001712/0001 Project Established

Page 66

ICS : 13.030.30National Ref : NEN 5897:2012 nlTitle : Sampling and analysis of asbestos in waste materials and demolition wasteScope : This standard describes the determination methods for the content of asbestos in: _

processed and non processed wate materials and demolition waste

Relatedness :National : New

Subsector : S24 Registration Date : 2012-02-08Organization : NENCountry : NetherlandsProject ID : 50001713/0001 Project EstablishedICS : 13.080.01National Ref : NTA 5727:2012 Concept nlTitle : Soil - Sampling and analysis of asbestos in sediment and dredged sludgeScope : This code of practice describes a method for the determination of the content of asbestos

in all types of sediment and dredged sludge. The method is applicable to in situ analysis where the asbestos content is determined independent of the form of asbestos.

Relatedness :National : New

** End of Subsector **

Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS

Subsector : S27 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024479/0001 Project EstablishedICS : 13.030.30, 13.300National Ref : ÖNORM S 2105Title : Classification and packaging of dangerous waste for transportScope : This ÖNORM includes requirements for the transportation of hazardous waste as

dangerous goods according to transport regulations (ADR/RID). She acts therefore on the classification of waste under the regulations for transport and the resulting labeling of the used packaging material or transport unit. The ADR-class and UN number are also to cite in the documents for the shipment of waste . As the rules for the classification, packaging and transport of the entries in the transport paper (ADR) and the bill of lading (RID) are usually identical, but the user usually only the ADR knows or uses, reference is made hereinafter only to the ADR and its reference structure. For the packaging in which waste is transported, which are dangerous goods, the regulations defined in these laws (eg acceptability of the use, approval of type approval certifi kilometers) apply. Also for residual content of hazardous waste in packaging, the ADR applies (see 3.6.2). The list of hazardous wastes made in clause 5 is in accordance with Annex 5 of the Waste Catalogue Ordinance.

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 67

Monthly Notifications Register

Notifications registered at CCMC from 2012-02-01 to 2012-02-29

Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING

Register issued on : 2012-03-02

Page 68Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2012-02-09Organization : DINCountry : GermanyProject ID : 13202251/0001 Project EstablishedICS :National Ref : 13202251Title : Ship service tank piping systems; filing and pressure equalizing equipment; sounding

pipes

Relatedness :National : New

** End of Subsector **

Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2012-02-27Organization : AFNORCountry : FranceProject ID : FA177882/0001 Project EstablishedICS :National Ref : PR XP R19-701Title : Road vehicles - Experimental method for transposition of dynamic forces generated by

an acitve component from a test bench to a vehicle

Relatedness :National : New

** End of Subsector **

Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024455/0001 Project EstablishedICS : 91.140.90National Ref : ÖNORM B 2450-1Title : Lifts, escalators and passenger conveyors - Part 1: General requirementsScope : This Austrian Standard includes an overview about the legal basis and standards for lifts,

lifting devices for persons, stairlifts, goods only lifts, service lifts, lifting tables, escalators and passenger conveyors. Annex includes sample forms for description of these systems and for calculations.

Relatedness :National : New

Subsector : T16 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024457/0001 Project EstablishedICS : 91.140.90National Ref : ÖNORM B 2450-2

Page 69

Title : Lifts, escalators and passenger conveyors - Part 2: Hazard analysis for liftsScope : This Austrian Standard includes hazard analysis for lifts and is to be used together with

ÖNORM EN ISO 14798.

Relatedness :National : New

Subsector : T16 Registration Date : 2012-02-09Organization : ASICountry : AustriaProject ID : 00024458/0001 Project EstablishedICS : 91.140.90National Ref : ÖNORM B 2450-3Title : Lifts, escalators and passenger conveyors - Part 3: Hazard analysis for escalators and

passenger conveyorsScope : This Austrian Standard includes hazard analysis for escalators and passenger conveyors and

is to be used together with ÖNORM EN ISO 14798.

Relatedness :National : New

** End of Subsector **

Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038985/0001 Project EstablishedICS :National Ref : PNE 135205Title : Road signalisation equipment. Horizontal signalisation. Thermoplastics. Test methods.

Determination of density thermoplastic materials cold.Scope : This project specifies a test method for the determination of density of thermoplastics

materials in cold conditions.

Relatedness :National : New

Subsector : T19 Registration Date : 2012-02-06Organization : AENORCountry : SpainProject ID : P0038987/0001 Project EstablishedICS :National Ref : PNE 135274Title : Road signalisation equipment. Horizontal signalisation. Road markings. Determination

of dosages of paints and drop materials in situ.Scope : This Standard determines the dosages of paints and drop on materials in situ used in road

horizontal signalisation.

Relatedness :National : REV/AMD UNE 135274:2010

** End of Subsector **

Page 70** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction

Subsector Title ISO/TC CEN/TC

reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products

Subsector Title ISO/TC CEN/TC

reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards

Subsector Title ISO/TC CEN/TC

reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use

Subsector Title ISO/TC CEN/TC

reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering

Subsector Title ISO/TC CEN/TC

reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials

Subsector Title ISO/TC CEN/TC

reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials

Subsector Title ISO/TC CEN/TC

reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment

Subsector Title ISO/TC CEN/TC

reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging

Subsector Title ISO/TC CEN/TC

reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology

Subsector Title ISO/TC CEN/TC

Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR