MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES · omni slide-on hinge 19 omni slide systems 20 cutlery inserts 21 organising systems 22 - 23 handle profiles 25 - 27 rubber matting 24 sige

MOVEMENT SYSTEMSFITTINGS AND ACCESSORIES

03/2018

We are where our customers are.Because we see customer proximity asan expression of our company culture.

MOVEMENT SYSTEMS | FITTINGS & ACCESSORIES CATALOGUE 2018

This catalogue consists of some products not produced by GRASS,but distributed and supplied by GRASS ZA

GRASS SOUTH AFRICA

A globally successful group of companies, a fresh brand withtradition and an extraordinary diversity of perspectives - that’s GRASS in a nutshell. With sales revenues of 378 millioneuros in the financial year 2017, over 1,900 employees at18 locations and more than 200 distributors in 60 countries,GRASS ranks among the world’s leading specialistsin movement systems.

For further information on GRASS products refer to ourInternational catalogue - www.grass.at

INDEX

DWD XP DRAWER SYSTEM - WHITE 4

DWD XP DRAWER SYSTEM - GREY 5

DYNAMOOV DRAWER SYSTEM 6

INTEGRA DRAWER SYSTEM 7

KINVARO FLAP SYSTEM 8 - 9

NEXIS CLICK-ON HINGE 11 - 12

NEXIS SLIDE-ON HINGE 13 - 14

OMNI CLICK-ON HINGE SOFT CLOSE 15 - 16

OMNI CLICK-ON HINGE 17 - 18

OMNI SLIDE-ON HINGE 19

OMNI SLIDE SYSTEMS 20

CUTLERY INSERTS 21

ORGANISING SYSTEMS 22 - 23

HANDLE PROFILES 25 - 27

RUBBER MATTING 24

SIGE PULL-OUT LARDER 29

SIGE PULL-OUT SHELF 30

SIGE ROTATION CORNER 31

SIGE PULL-OUT CORNER 32

SIGE PULL-OUT BASE 33 - 34

SIGE RECYCLING BINS 35 - 36

SIGE WASTE BINS 37

ITALIANA FERRAMENTA ACCESSORIES 38

OMNI ACCESSORIES 39 - 41

OMNI KNOCKDOWN FITTINGS 42 - 43

PAGE

FEATURES

DRAWER TYPE DRAWER LENGTH NL CODE

BACK BRACKET


ADD ADD


– 4 –

ABBREVIATION: ICW - Inside Cabinet WidthNL – Length of runner

ICW - 74 mm ICW - 74 mm

68 mm

ICW - 74 mm

BACK

NL - 9 STD BASE NL- 9POT BASE

164 mm

ICW - 74 mm

BACKINSTALLATION

POSITION37 mm TO 4TH HOLE

BACKBRACKET

INSET PANELCOVER CAP FOR

INSET PANELINSET DRAW

FRONT FIXING

275

400

450

500

6151.275.2

6151.400.2

6151.450.2

6151.500.2

DWD XP H95

STANDARD DRAWER

450

500

6151.450.2

6151.500.2

F092072184507

F092072185507

F092115414223

F092115414223

DWD XP H95

WITH RECTANGULAR RAIL

POT DRAWER

INSET DRAWER

JIG

* 40kg + 60kg

* 2D Adjustment

* Fully synchronised

* Full Extension

* Width of bottom and back panel is the same

CALCULATING YOUR OWN CUTTING LIST

ADDRECTANGULAR

RAIL

400

450

500

6151.400.2

6151.450.2

6151.500.2

F092101589223

F092101589223

F092101589223

F102101382218

F102101382218

F102101382218

F102101369211

F102101369211

F102101369211

DDW XP H95 INSET

www.grass.co.za

DWD XP DRAWER SYSTEMWHITE

ADD

DRILLING JIG FOR CABINET MEMBERF146101347507

DWD DRAWER FRONT MARKING JIGF146083256101

PILOT DRILL BIT 3.5 MMF146035692299

addFOR MORE ACCESSORIES, REFER TO PAGE 19 & 20600 MM WHITE CUTLERY TRAY

ADD

FEATURES

DRAWER TYPE DRAWER LENGTH NL CODEINSET PANEL


ADD



275

400

450

500

6151.275.17

6151.400.17

6151.450.17

6151.500.17

DWD XP H95

68 mm

ICW - 74 mm


BACK

NL - 9 STD BASE

ICW - 74 mmICW - 74 mm

NL- 9POT BASE

164 mm

ICW - 74 mm

BACK

400

450

500

450

500

6151.400.17

6151.450.17

6151.500.17

6151.450.17

6151.500.17

F092075878513

F092075881513

F

F092072185507

F092072184507

092075884513

F092082978223

F092082978223

F092082978223

F092082978223

F092082978223

DWD XP H95WITH RECTANGLE RAIL

POT DRAWER

INSET DRAWER

JIG

INSTALLATION POSITION

37 mm TO 4TH HOLE

RAILBACKBRACKET

400

450

500

6151.400.17

6151.450.17

6151.500.17

FRONT FIXING

ADD

F092101589223

F092101589223

F092101589223

F092101372211

F092101372211

F092101372211

COVER CAPFOR INSET PANEL

ADD

F102109572218

F102109572218

F102109572218

DWD XP H95 INSET

STANDARD DRAWER

* 40kg + 60kg

* 2D Adjustment


* Full Extension

* Width of bottom and back panel is the same

– 5 –www.grass.co.za

DWD XP DRAWER SYSTEMGREY

ADD ADD


DWD DRAWER FRONT MARKING JIGF146083256101



DWD XP H95WITH ROUND RAIL



270

300

350

400

450

500

550

F130101101211

F130107764211

F130107768211

F130107772211

F120107776210

F130107780210

F130107784210

F134101220

F134101220

F134101220

F134101220

F134101220

F134101220

F134101220

DYNAMOOV SOFT-CLOSE

JIG

* 30kg

* 1D Adjustment


* Toolless adjustment

* Full Extension

FEATURES


DRILLING JIG FOR BACK HOLE OF DRAWERF146109874299

ADDLOCKING DEVICE

DRAWER TYPE R D AWER LENGTH NL CODE

300

350

400

450

500

550

F130101115211

F130101117211

F130101119211

F130101121210

F130101123210

F130101125210

F134101220

F134101220

F134101220

F134101220

F134101220

F134101220

DYNAMOOV TIPMATIC

ADD LOCKING DEVICE



ICW - 42 mm

ICW

NL -10 mm

NL +3 mm


37 mm TO 4TH HOLE



DYNAMOOV DRAWER SYSTEM


DRAWER TYPE CODE

ADDADD ADD

450

500

F084074926207

F084074917207

F084115209236

F084115209236

F084115210236

F084115210236INTEGRA H-53

DRAWERLENGTH NL

INTEGRA DRAWER SYSTEM



FEATURES

* 30kg

* 2D Adjustment


53/70 mm

IWC - 31 mm

BACK

LOR-5 STD BASE

ICW - 31 mmICW - 31 mm

LOR-5POT BASE

131 mm

ICW - 31 mm

BACK

85 MM DRAWER

149 MM DRAWER

RAIL SETS

53 MM DRAWER


JIGDRILLING JIG FOR CABINET MEMBERF146101347507

INTEGRA DRAWER FRONT MARKING JIGF146083270101


DRAWER TYPE CODE

ADDADD ADD

450

500

F084075168204

F084075170204

F084115231236

F084115231236

F084115233236

F084115233236

F084075011240

F084075011240INTEGRA H-149

DRAWERLENGTH NL

TYPE CODEINTEGRA POT RAIL SET 500 3500.500.2

INTEGRA FILING RAIL 500 F084074850511

SIZE

DRAWER TYPE CODE LEFT BRACKET COVER CAP RIGHT BRACKET

LEFT BRACKET COVER CAPRIGHT BRACKET

LEFT BRACKET COVER CAPRIGHT BRACKET

ADDADD ADD

275

350

400

450

500

550

F084074972207

F084074952207

F084074959207

F084074960207

F084074961207

F084074968207

F084115231236

F084115231236

F084115231236

F084115231236

F084115231236

F084115231236

F084115233236

F084115233236

F084115233236

F084115233236

F084115233236

F084115233236

F084075011240

F084075011240

F084075011240

F084075011240

F084075011240

F084075011240

INTEGRA H-85

DRAWERLENGTH NL

WHITE

129

32 37

35 2

14

Ø 6.3Ø 3.5

KV

KINVARO FLAP SYSTEM


FLAP WIDTH X FLAP HEIGHT X FLAP THICKNESS X DENSITY + HANDLE = WEIGHT OF FLAP

DENSITIES: MDF 0.85KG, CHIPBOARD 0.65KG, PINE 0.45KG

FOR BAR HANDLES, ALLOW 0.1KG FOR EACH 100 MM HANDLE WIDTH

LIFTS COME WITH ADJUSTABLE DAMPING/ SOFT-CLOSE SYSTEM

WE RECOMMEND A TRIAL FIT BEFORE FINAL INSTALLATION

HOW TO CALCULATE YOUR DOOR WEIGHT:

FLAP TYPE MIN HEIGHT MAX HEIGHT RANGE OF FLAP CODE

TYPE 4B 600 649 Weight: 4.1 kg - 12.1kg F152147675201

TYPE 4C 600 649 Weight: 6.8 kg - 15.8 kg F152147842201

TYPE 5B 650 699 Weight: 3.8 kg - 11.4 kg F152147840201


TYPE 6D 700 749 Weight: 10.0 kg - 18.0 kg F152147846201


TYPE 7D 750 900 Weight: 8.6 kg - 19.2 kg F152147847201

KINVARO F-20 600 900 Width: 450 mm-1200 mm


SPRING A 420 719 Weight: 1.5 kg - 7.5 kg F152147818201

SPRING B 420 629 Weight: 5.0 kg - 11.0 kg F152147819201

SPRING C 540 750 Weight: 4.0 kg - 14.0 kg F152147820201

SPRING D 570 750 Weight: 6.5 kg - 16.0 kg F152147821201

KINVARO S-35 420 750 Width: 450 mm-1200 mm


TYPE 1A 350 369 Weight: 2.5 kg - 6.5 kg F152147781201



TYPE 5B 430 600 Weight: 4.0 kg - 7.5 kg F152147715201


KINVARO L-80 350 600 Width: 450 mm-1200 mm


*KINVARO T-70 300 400 Width: Up to 1200 mm F151147693201



www.grass.co.za

KINVARO FLAP SYSTEM

– 9 –

FLAP TYPE MIN HEIGHT MAX HEIGHT MAX WEIGHT CODE

KINVARO D-S WHITE 60N F053139666607

KINVARO D-S NIGHT 60N F053139666609

200

200

200

200

200

200

480

480

480

480

480

480

6 kg

6 kg

DESCRIPTION APPLICATION CODE PACK SIZE

T

TIOMOS FLAP HINGE NIGHT OVERLAY 90° F053139677236 EACH

EACHIOMOS FLAP HINGE NICKEL OVERLAY 90° F053139671

KINVARO D-M WHITE 100N F053139662607 WH

KINVARO D-M NIGHT 100N

10 kg

10 kg F053139662607 BLK

F053139664607

F053139665607

KINVARO D-S WHITE 40N

KINVARO D-S NIGHT 40N

3 kg

3 kg

FEATURES Modern design90̊ opening angleFor flap thicknesses of up to 21 mmNarrow gaps between door and cabinetLarge overlay of up to 19 mm12 mm cup depth3 - dimensional adjustmentVery suitable for combining with the Kinvaro D flap stays

DRILLING PATTERNSFront Cabinet

14

29

35

CUP DIMENSIONS

min

. 12

min

. 14

2.5

2.5

63

39

13

29

14

35

www.grass.eu

TIOMOS HIDDEN HINGE SYSTEM

The new era for furniture doors. Hinge comfort becomes virtually invisible.Intelligent. Elegant. Hidden.

Premiere for Tiomos Hidden – the perfectly integrated hinge inside the cabinet. With Tiomos Hidden, GRASS presents a hinge system that is entirely milled into the cabinet. Slender in design, this hinge plays to its multifaceted functional strengths behind the scenes. Amongst others, these include the perfectly integrated comfort system for gentle closing. In the colour option Night, Tiomos Hidden also impresses in combination with the latest design trends favouring dark surface fi nishes.

Discreet shape. Clever functionality.With a 105-degree opening angle, the slender Tiomos Hidden hinge can be optimally incorporated into doors with a thickness of just 18 mm or above.

FEATURES Door thickness up to 24 mmCup depth 11mmClip on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plate



FEATURES Door thickness up to 30 mmCup depth 11.8 mmClip on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plate95° Opening angle

– 11 –

DESCRIPTION APPLICATION CODE PACK SIZENEXIS HINGE CLICK-ON SCREW-IN FULL OVERLAY 100° F015072722236 250

NEXIS HINGE CLICK-ON DOWEL FULL OVERLAY 100° F015072719236 250

DESCRIPTION APPLICATION CODE PACK SIZENEXIS HINGE CLICK-ON SCREW-IN HALF OVERLAY 100° F015072729236 250

NEXIS HINGE CLICK-ON DOWEL HALF OVERLAY 100° F015072727236 250

DESCRIPTION APPLICATION CODE PACK SIZENEXIS HINGE CLICK-ON SCREW-IN INSET 100° F015072736236 250

NEXIS HINGE CLICK-ON DOWEL INSET 100° F015072732236 250

DESCRIPTION APPLICATION CODE PACK SIZENEXIS HINGE CLICK-ON SCREW-IN INSET 45° CORNER F015072751225 125

NEXIS HINGE CLICK-ON DOWEL INSET 45° CORNER F015072750225 125

DESCRIPTION APPLICATION CODE PACK SIZENEXIS HINGE CLICK-ON SCREW-IN INSET 83 MM POST/BLIND CORNER F015072788225 125

NEXIS HINGE CLICK-ON DOWEL INSET 83 MM POST/BLIND CORNER F015072787225 125

www.grass.co.za

NEXIS CLICK-ON HINGE

FEATURES Door thickness up to 30 mmCup depth 11.8 mmClip on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plate95° Opening angle

FEATURES Door thickness up to 26 mmCup depth 11mmClip on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plateZero Protusion hinge at 90° opening angle

www.grass.co.za

NEXIS CLICK-ON HINGE

– 12 –

DESCRIPTION APPLICATION CODE PACK SIZENEXIS HINGE CLICK-ON SCREW-IN

NEXIS HINGE CLICK-ON DOWEL

FULL OVERLAY 170°

FULL OVERLAY 170°

F015072842217

F015072840217

50

50

DESCRIPTIO

NEXIS CLICK-ON CROSS M/PLATE SCREW FIX 2 MM F060073145236 250

DESCRIPTION

NEXIS CLICK-ON CROSS M/PLATE MOUNTED EURO SCREW 2 MM F060073180236 250

DESCRIPTION

NEXIS HINGE SOFT-CLOSE ADAPTER F069073715225 125

KPUSH TECH WITH BUFFER STRONG 57008080AB 70 MM WHITE

KPUSH TECH WITH BUFFER STRONG 57008080EEMOUNTING PLATE WITH HOUSING 57010040G

GRAPHITEGRAPHITE

MOUNTING PLATE WITH HOUSING 57010040 80 MM70 MM

80 MM

WHITE

DESCRIPTION CODE SIZE FINISH

APPLICATION CODE PACK SIZE



N

FEATURES Door thickness up to 24 mmCup depth 11 mmSlide on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plate



FEATURES Door thickness up to 30 mmCup depth 11.8 mmSlide on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plate95° Opening Angle

FEATURES Door thickness up to 30 mmCup depth 11.8 mmSlide on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plate95° Opening Angle

www.grass.co.za

NEXIS SLIDE-ON HINGE

DESCRIPTIONNEXIS HINGE SLIDE-ON SCREW-IN FULL OVERLAY 100°

NEXIS HINGE SLIDE-ON DOWEL FULL OVERLAY 100°

F016073008236

F016073010236

250

250

DESCRIPTIONNEXIS HINGE SLIDE-ON SCREW-IN

NEXIS HINGE SLIDE-ON DOWEL

HALF OVERLAY 100°

HALF OVERLAY 100°

F016073014236

F016073016236

250

250



INSET 100°

INSET 100°

F016073018236

F016073020236

250

250



INSET 45° CORNER

INSET 45° CORNER

F016073033225

454.405.54.0315

125

125



63 MM INSET/BLIND-CORNER

63 MM INSET/BLIND-CORNER

F016073048225

456.405.54.9615

125

125

– 13 –






NEXIS SLIDE-ON HINGE

www.grass.co.za



FULL OVERLAY 170°

FULL OVERLAY 170°

F016073077217

F016073078217

50

50

DESCRIPTION

NEXIS SLIDE-ON M/PLATE SCREW FIX - 0 MM F062073298236 250

DESCRIPTION

NEXIS SLIDE-ON M/PLATE MOUNTED EURO SCREW - 0 MM F062073316236 250

DESCRIPTION

NEXIS HINGE SOFT-CLOSE ADAPTER F069073715225 125

FEATURES Door thickness up to 26 mmCup depth 11 mmSlide on with various plate optionsSoft-close compatible3-Dimentional adjustment with appropriate plateZero Protrusion hinge at 90° opening

– 14 –



GRAPHITEGRAPHITE


80 MM

WHITE






– 15 –

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW-IN FULL OVERLAY SOFT-CLOSE 110° A36A07 200

OMNI HINGE CLICK-ON DOWEL FULL OVERLAY SOFT-CLOSE 110° A36A07N 200

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW-IN HALF OVERLAY SOFT-CLOSE 110° A36A03 200

OMNI HINGE CLICK-ON DOWEL HALF OVERLAY SOFT-CLOSE 110° A36A03N 200

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW-IN INSET SOFT-CLOSE 110° A36A01 200

OMNI HINGE CLICK-ON DOWEL INSET SOFT-CLOSE 110° A36A01N 200

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW-IN INSET SOFT-CLOSE 45° AC12T02 100

OMNI HINGE CLICK-ON DOWEL INSET SOFT-CLOSE 45° AC12T02N 100

OMNI CLICK-ON HINGE SOFT CLOSE

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW-IN INSET POST HINGE SOFT-CLOSE 110° A1203 100

OMNI HINGE CLICK-ON DOWEL INSET POST HINGE SOFT-CLOSE 110° A1203N 100

FEATURESCup depth 11.3 mmClip on with various plate options





Door thickness up to 16 mm





OMNI CLICK-ON HINGE SOFT CLOSE


OMNI M/PLATE CLICK-ON SCREW FIX - 0 MM C31H0 500


OMNI M/PLATE CLICK-ON 10 MM MOUNTED EURO SCREW - 0 MM C31H0D-10 500


OMNI M/PLATE CLICK-ON 13 MM MOUNTED EURO SCREW - 0 MM C31H0D-13 500


OMNI M/PLATE CLICK-ON SCREW FIX C31H0-4 HOLE 500


OMNI M/PLATE CLICK-ON SCREW FIX - ID C31CAMHON 500

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW-IN FULL OVERLAY SOFT-CLOSE 165° 100

OMNI HINGE CLICK-ON DOWEL FULL OVERLAY SOFT-CLOSE 165°

AC2016

AC2016N 100


OMNI

– 16 –


OMNI CLICK-ON HINGE

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN FULL OVERLAY 110° C0406 250

OMNI HINGE CLICK-ON DOWEL FULL OVERLAY 110° C0406N 250

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN HALF OVERLAY 110° C0403 250

OMNI HINGE CLICK-ON DOWEL HALF OVERLAY 110° C0403N 250



DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN INSET 110° C0401 250

OMNI HINGE CLICK-ON DOWEL INSET 110° C0401N 250


DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN INSET 45°CORNER C12T02 100

OMNI HINGE CLICK-ON DOWEL INSET 45°CORNER C12T02N 100


DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN INSET/BLIND CORNER HINGE C12T03 100

OMNI HINGE CLICK-ON DOWEL INSET/BLIND CORNER HINGE C12T03N 100


OMNI

– 17 –






OMNI CLICK-ON HINGE

– 18 –

OMNI

DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN BI-FOLD/PIE-CUT FULL HOLE C12T04 100

OMNI HINGE CLICK-ON DOWEL BI-FOLD/PIE-CUT FULL HOLE C12T04N 100


DESCRIPTION APPLICATION CODE PACK SIZEOMNI HINGE CLICK-ON SCREW IN FULL OVERLAY 165° C2016 100

OMNI HINGE CLICK-ON DOWEL FULL OVERLAY 165° C2016N 100



OMNI M/PLATE CLICK-ON SCREW FIX C02H0 500




OMNI M/PLATE CLICK-ON C02H04HOLE 500SCREW FIX


OMNI M/PLATE CLICK-ON C02H0D-13 50013 MM MOUNTED EURO SCREW

OMNI M/PLATE CLICK-ON C02H0D-10 50010 MM MOUNTED EURO SCREW

OMNI SLIDE-ON HINGE

– 19 –

OMNI


OMNI HINGE AND PLATE SLIDE-ON SCREW IN FULL OVERLAY C2809.004 200 PREPACK

OMNI HINGE SLIDE-ON SCREW IN FULL OVERLAY C2809.005 200

OMNI HINGE SLIDE-ON DOWEL FULL OVERLAY C2809.005N 200

OMNI M/PLATE SLIDE-ON 4 HOLE SCREW-IN C01H04HOLE 200

OMNI M/PLATE SLIDE-ON 2 HOLE MOUNTED EURO SCREW C01H0D-13 200

FEATURES Pre-packed


OMNI FACE FRAME HINGE + PLATE SCREW-IN HALF OVERLAY C1503+ 250

FEATURES Face Frame Application


OMNI HINGE AND PLATE SLIDE-ON SCREW IN FULL OVERLAY C2809.011 200 PREPACK

OMNI HINGE SLIDE-ON SCREW IN FULL OVERLAY C2809.012 200

OMNI HINGE SLIDE-ON DOWEL FULL OVERLAY C2809.012N 200

OMNI M/PLATE SLIDE-ON 4 HOLE SCREW-IN C01H04HOLE 200

OMNI M/PLATE SLIDE-ON 2 HOLE MOUNTED EURO SCREW C01H0D-13 200

FEATURES Pre-packed

1 GREYSOFT-CLOSE ADAPTER FOR SINGLE WALL STEELDRAWERS

4401.159 SOFT-CLOSE PIN/STRIKER FOR SINGLE WALL STEEL DRAWER 1 WHITE

4401.143 SOFT-CLOSE PIN/STRIKER FOR WOODEN DRAWER 1 GREY

4401.125

CODE DESCRIPTION SIZE SET FINISH550-704-086X270W OMNI SUPER STEEL DRAWER SLIDE 86 X 270 10 WHITE

550-704-086X350W OMNI SUPER STEEL DRAWER SLIDE 86 X 350 10 WHITE






5501 MARKING JIG FOR DRAWER FRONTS 1 BLACK

CODE DESCRIPTION SET FINISH

CODE DESCRIPTION SIZE SET FINISHMBBF/250 OMNI BALL BEARING FULL EXTENSION 45 KG 250 MM 10 ZINC

MBBF/300 OMNI BALL BEARING FULL EXTENSION 45 KG 300 MM 10 ZINC







CODE DESCRIPTION SIZE SET FINISH

MBBF/400SC OMNI BALL BEARING FULL EXTENSION SOFT CLOSE 45 KG 400 MM 10 ZINC





SLIDE SYSTEMS

– 20 –

OMNI

NOVA PRO 450 MM CUTLERY INSERT CNP450/500SIL 360X480 SILVER

VIONARO 450 MM CUTLERY INSERT CVI450/500SIL 375X473 SILVER

DWD XP 450 MM CUTLERY INSERT CXP450/500SIL 356X473 SILVER

CUTLERY INSERTS

www.grass.co.za

NOVA PRO 450 MM CUTLERY INSERT CNP450/500WH 360X480 WHITE

VIONARO 450 MM CUTLERY INSERT CVI450/500WH 375X473 WHITE

DWD XP 450 MM CUTLERY INSERT CXP450/500WH 356X473 WHITE

INTEGRA 450 MM CUTLERY INSERT CIN450/500WH 387X480 WHITE

DESCRIPTION CODE SIZE IFIN SH

W x D

CNP450/500GRP 360X480 GRAPHITE

VIONARO 450 MM CUTLERY INSERT CVI450/500GRP 375X473 GRAPHITE


W x D


W x D

DESCRIPTION CODE FINISH

SIZE

W x D

CLASSICO KNIFE INSERT



CKNIFE/WH

CKNIFE/GRP

CKNIFE/SIL

165X440

165X440

165X440

WHITE

GRAPHITE

SILVER


SIZE

W x DCLASSICO SPICE INSERT WHITE

CLASSICO SPICE INSERT GRAPHITE

CLASSICO SPICE INSERT

CSPICE/WH

CSPICE/GRP

CSPICE/SIL

165X440

165X440

165X440 SILVER

– 21 –

CNP600/500SIL 510X480 SILVER






INTEGRA 600 MM CUTLERY INSERT CIN600/500WH 537X480 WHITE



CNP900/500SIL 810X480 SILVER








NOVA PRO 450 MM CUTLERY INSERT





ORGANISING SYSTEMS



W x DTAVINEA SORTO B276 – NOVAPRO F007130058201 276 X 500 STONE

TAVINEA SORTO B276 – NOVAPRO F007130059201 276 X 500 SILVER

TAVINEA SORTO B276 – VIONARO AND DWD XP F007130137201 276 X 500 GRAPHITE


W x DTAVINEA SORTO B186 – NOVAPRO F007130086201 186 X 500 STONE

TAVINEA SORTO B186 – NOVAPRO F007130087201 186 X 500 SILVER

TAVINEA SORTO B186 – VIONARO AND DWD XP F007130158201 186 X 500 GRAPHITE

DESCRIPTION CODE SIZE FINISH TAVINEA SORTO DIVIDER RAIL – NOVAPRO F007130114207 500 STONE

TAVINEA SORTO DIVIDER RAIL – NOVAPRO F007130115207 500 SILVER

TAVINEA SORTO DIVIDER RAIL – VIONARO AND DWD XP F007130179207 500 GRAPHITE


W x DTAVINEA SORTO KNIFE BLOCK – NOVAPRO F007101995201 185 X 500 DARK ASH

TAVINEA SORTO KNIFE BLOCK – VIONARO AND DWD XP F007102424201 185 X 500 DARK ASH


W x DTAVINEA SORTO KNIFE BLOCK – NOVAPRO F007101990201 185 X 500 LIGHT ASH

TAVINEA SORTO KNIFE BLOCK – VIONARO AND DWD XP F007102418201 185 X 500 LIGHT ASH

ORGANISING SYSTEMS


W x DMAGIC SORTO SET S/STEEL & GREY F092075619201 S/STEEL

MAGIC SORTO SET S/STEEL & GREY F092075635201 S/STEEL

MAGIC SORTO SET S/STEEL & WHITE F092116167201 S/STEEL

MAGIC SORTO SET S/STEEL & WHITE F092076846201 S/STEEL



W x DTAVINEA SORTO SPICE RACK – NOVAPRO F007101997201 185 X 500 DARK ASH

TAVINEA SORTO SPICE RACK – VIONARO AND DWD XP F007102426201 185 X 500 DARK ASH


W x DTAVINEA SORTO SPICE RACK – NOVAPRO F007101992201 185 X 500 LIGHT ASH

TAVINEA SORTO SPICE RACK – VIONARO AND XP F007102420201 185 X 500 LIGHT ASH


W x DTAVINEA SORTO FOIL HOLDER – NOVAPRO F007101999201 185 X 500 DARK ASH

TAVINEA SORTO FOIL HOLDER – VIONARO AND DWD XP F007102428201 185 X 500 DARK ASH


W x DTAVINEA SORTO FOIL HOLDER – NOVAPRO F007101994201 185 X 500 LIGHT ASH

TAVINEA SORTO FOIL HOLDER – VIONARO AND DWD XP F007102422201 185 X 500 LIGHT ASH

450 X 500

600 X 500

450 X 500

600 X 500

www.grass.co.za

RUBBER MATTING

– 24 –


RUBBER CANVAS MAT

RUBBER CANVAS MAT

CMAT/GRP

CMAT/GR

25 M X 480 MM

25 M X 480 MM

GRAPHITE

GREY

DESCRIPTION CODE SIZE FINISHRUBBER MAT GREY V/MAT 600 30 M x 600 MM

30 M x 600 MM

GREY

RUBBER MAT GRAPHITE V/MAT 600 GR GRAPHITE


RUBBER MAT SOLID CMAT/WH 25 M X 530 MM WHITE

HANDLE PROFILES

– 25 –


GOLA HANDLE SLIM C SNA211CS 49 MM X 3M ALU

GOLA HANDLE SLIM L SNA211LS 40 MM X 3M ALU

FIXING BRACKET SLIM SNA/F - STEEL

END CAP C SLIM S126.37.996 - ALU

END CAP L SLIM S126.37.997 - ALU


GOLA HANDLE C NA211CS 65 MM X 3 M ALU

GOLA HANDLE L NA211LS 50 MM X 3 M ALU

FIXING BRACKET NA/F - STEEL

END CAP C 126.37.996 - ALU

END CAP L RIGHT 126.37.997 - ALU

END CAP L LEFT 126.37.998 - ALU

OMNI

Allows for more height spacing inside the drawersSquare cut outMakes vertical applications possibleEnd caps available for both optionsPowder coating in other colours available on requestMore accurate cutting for mitre jointsStraight edge profile gives more elegent look

FEATURES

Round cut outEnd caps available for both optionsPowder coating in other colours available on request

FEATURES

ON REQUEST:

STANDARD:

ALU

WHT GRY BLK

* Min 10 lengths* Lead time 7 - 10 days

ON REQUEST:

STANDARD:

ALU

WHT GRY BLK

* Min 10 lengths* Lead time 7 - 10 days

HANDLE PROFILES

– 26 –

VOGUE


STRIP HANDLE 32 MM VD5_ALU 3 M

3 M

ALU

STRIP HANDLE 32 MM VD5_SS S/STEEL

Suitable for cabinet doors and drawer fronts.Vertical mounting for all doors.Can be cut to size.Can be powder coated.Black & Alu available in pre-cut sizes of 100 mm, 200 mm and 300 mm.

FEATURES

Suitable for cabinet doors and drawer fronts.Vertical mounting for all doors.Can be cut to size.Can be powder coated.Black & Alu available in pre-cut sizes of 100 mm, 200 mm and 300 mm.

FEATURES

ON REQUEST:

STANDARD:

ALU SS

WHT GRY GRP BLK

ON REQUEST:

STANDARD:

ALU

WHT GRY GRP BLK

CODE SIZE

SIZE

FINISH

STRIP HANDLE 38 MM VD6_ALU 3 M ALU

DESCRIPTION

HANDLE PROFILES

– 27 –

VOGUE

Cabinet Doors and Drawer FrontsTop or bottom mounted to doors and drawer frontsCan be used in conjunction with VD10


FINGER GRIP HANDLE SHORT ALUMINIUM VD9_ALU 3 M ALU

FINGER GRIP HANDLE SHORT BLACK VD9_BLK 3 M BLACK

IDESCR PTION CODE SIZE FINISH

FINGER GRIP HANDLE LONG ALUMINIUM VD10_ALU 3 M ALU

FINGER GRIP HANDLE LONG BLACK VD10_BLK 3 M BLACK

FEATURES

ALU BLK

ON REQUEST:

STANDARD:

WHT GRY GRP

ALU BLK

ON REQUEST:

STANDARD:

WHT GRY GRP

Cabinet Doors and Drawer FrontsTop or bottom mounted to doors and drawer frontsCan be used in conjunction with VD9

FEATURES

www.grass.co.zaTAVINEA ORGANISING SYSTEM

- 28 -

SIGE LARDER PULL OUT

FEATURES Soft-close (Optional)Weight capacity - 80 kgSolid base basketsAvailable in Chrome and Graphite

DESCRIPTION SIZE FINISH

PULL OUT PANTRY

SOLID BASE PULL OUT 295A 295K 295O 296+ CHROME

SOLID BASE PULL OUT 295 GRAPHITE 295 GRAPHITE 295O 296+GREY

300MM

300MM GRAPHITE

ADDFULL EXTENSION SLIDE

ADDSOFT-CLOSE

ADD5 BASKETS

CODE300/1800 FRAME

- 29 -


SOLID BASE PULL OUT 119+GRASS 450

119+GRASS 600

119+GRASS 900

119+GRASS 450 GR

119+GRASS 600 GR

119+GRASS 900 GR

F101108276211 450 MM CHROME

SOLID BASE PULL OUT F101108276211 600 MM CHROME

SOLID BASE PULL OUT F101108276211 900 MM CHROME

PULL OUT SHELFSIGE

FEATURES Soft-closeWeight capacity - 40 kgFull extension drawer slideFully synchronised Solid baseAvailable in Chrome and Graphite

ADDNOVA PRO RUNNER


SOLID BASE PULL OUT F101108276211 450 MM GRAPHITE



ADDNOVA PRO RUNNER

- 30 -

SIGE ROTATION CORNER


S

SIGE 3/4 CAROUSEL FLAT WIRE

IGE 3/4 CAROUSEL FLAT WIRE 3

363+ GRAPHITE

63+ 800 MM

800 MM GRAPHITE

CHROME

FEATURES Retrofit Shelf mountedWeight capacity 40 kg per shelf

DESCRIPTION CODE SIZE FINISHSIGE 3/4 CAROUSEL ROUND WIRE 363I 700 MM CHROME

- 31 -

SIGE BLIND CORNER LEFT 371 + LH CHROME

SIGE BLIND CORNER

SIGE BLIND CORNER

371+LH GRAPHITE

371+RH GRAPHITE

900 MM

900 MM

900 MM 450 MM

450 MM

450 MM

450 MM

900 MM

GRAPHITE

GRAPHITE

SIGE BLIND CORNER SOFT-CLOSE

SIGE BLIND CORNER SOFT-CLOSE

371WH

371GRP

-

-

-

-

WHITE

GRAPHITE

SIGE BLIND CORNER RIGHT 371 + RH CHROME

DESCRIPTION CODE SIZE MAX DOOR SIZE FINISH

SIGE PULL OUT CORNER

FEATURES Retrofit Shelf mountedWeight capacity 25 kg per shelfMore stabilityESoft-close (Optional)asy to install

- 32 -

SIGE PULL OUT BASE

FEATURES Soft-closeWeight capacity - 40 kgFull extension drawer slideFully synchronised Solid baseAvailable in Chrome and Graphite

BOTTLE RACK DIVIDER KIT 065+ 150 MM CHROME



SOLID BASE PULL OUT 002+GRASS F101108277l X 2 150 MM CHROME

SOLID BASE PULL OUT 002+GRAPHITE F101108277l X 2 150 MM GRAPHITE

ADDNOVA PRO RUNNER

- 33 -

SIGE PULL OUT BASE

BOTTLE RACK DIVIDER KIT 066+ 300 MM CHROME

BOTTLE RACK DIVIDER KIT 006 + GREY 300 MM GRAPHITE


FEATURES Soft-close or Push to openWeight capacity - 40 kgFull extension drawer slideFully synchronised Solid baseAvailable in Chrome and Graphite


SOLID BASE PULL OUT 004+GRASS F101108276211 300 MM CHROME

SOLID BASE PULL OUT 004+GREY F101108276211 300 MM GRAPHITE

ADDNOVA PRO RUNNER

- 34 -

PULL OUT RECYCLING BIN 574 F101108276211 300 MM 35 LITRES


SIGE RECYCLING BINS

FEATURES Soft-close or Push to openWeight capacity - 40 kgFull extension drawer slideFully synchronised Concealed runnerFixed shelfHeight 560



DESCRIPTION CODE SIZE CAPACITYADD

NOVA PRO RUNNER




NOVA PRO RUNNER



NOVA PRO RUNNER

- 35 -

PULL OUT WASTE BIN UNDER SINK 575 F101108273211 600 MM 36 LITRES

SIGE RECYCLING BINS

AUTO OPEN BIN BASE MOUNT 520 450 MM 32 LITRES

DESCRIPTION CODE SIZE CAPACITY

PULL OUT WASTE BIN BASE MOUNT 540 300 MM 21 LITRES


FEATURES Soft-closeWeight capacity - 40 kgFull extension drawer slide - 450 mmFully synchronised Concealed runnerFixed shelfHeight – 360 mmBin depth – 450 mm


NOVA PRO RUNNER

- 36 -

SIGE WASTE BINS

HANGING BIN 557 185 MM 5 LITRES


COUNTER TOP BIN IRCOO5PP 300 MM 8 LITRE


DESCRIPTION CODE SIZE FINISHW D H

WASTE BIN 45L + LID H6245 380 X 330 X 660 GREY

BIN BRACKET FOR 45L BIN B/BIN BRACKET WHITE

FLAP STAY 356.050.00.0070 CHROME

- 37 -

TRIADE WOOD SHELF SUPPORT 25-4 1621501000 150 MM METAL

TRIADE BRACKET 16215020ZN 65 MM S/STEEL


ACCESSORIESITALIANA FERRAMENTA



GRAPHITEGRAPHITE


80 MM

WHITE


57008040AB 70 MM WHITE

MOUNTING PLATE WITH HOUSING 57010040 80 MM WHITE


KPUSH TECH WITH MAGNET + SCREW 57008020 70 MM WHITE

MOUNTING PLATE WITH HOUSING 57010040 80 MM WHITE


KRABY DROP DOWN STAY L244 42210010.224 244 MM METAL

KRABY DROP DOWN STAY L355 42230010.355 355 MM METAL


FEATURES Width: Max 1200 mmHeight: 225 - 450 mm

KPUSH TECH WITH BUFFER NORMAL

KPUSH TECH WITH BUFFER NORMAL 57008040EEMOUNTING PLATE WITH HOUSING 57010040G

GRAPHITEGRAPHITE

70 MM

80 MM

KPUSH TECH WITH MAGNET + SCREW 57008020GMOUNTING PLATE WITH HOUSING 57010040G

GRAPHITEGRAPHITE

70 MM

80 MM

- 38 -

ACCESSORIESOMNI

WARDROBE LIFT – 20KG W/SUPER LIFT 750 - 1150 MM GREY


RECESSING DOOR SYS HEAVY DUTY+HINGES+BAR KV8092/500 500 MM BLACK

RECESSING DOOR SYS HEAVY DUTY+HINGES+BAR KV8092/600 600 MM BLACK


SHOE P/OUT 600CR & RUNNER B/SHOE P/O 600R 568 X 500 X 160 CHROME

SHOE P/OUT 900CR & RUNNER B/SHOE P/O 900R 868 X 500 X 160 CHROME


COAT RAIL OVAL B/RAIL 15 X 30 X 3000 CHROME

ROD HOLDER B/ROD HOLDER 15 X 30 CHROME

CENTRE SUPPORT B/HOLDER SUPPORT 15 X 30 CHROME


OVAL RAIL B/RAIL ALU 19 X 34 X 3000 ALU

HANG RAIL BRACKET T128W 20 X 35 WHITE


FEATURES Height up to 2000 mmDoor thickness up to 22 mmGear systemNo Sagging of doorsUp to a maximum weight capacityof 35 Kg per doorInset or overlay of 6 mm application only

- 39 -

CHROME WIRE BASKET V/B400C 400 MM CARCASS CHROME





CURVED WINE BOTTLE RACK WR240D 400 MM CHROME




OMNI ACCESSORIES

VOLPATO LEG C/LEG 100P 100 MM BLACK

VOLPATO LEG C/LEG 150P 150 MM BLACK

SKIRTING CLIP C/CLIP/P BLACK


OMNI LEG C/LEG 100+CLIP 100 MM BLACK

OMNI LEG C/LEG 150+CLIP 150 MM BLACK


- 40 -

STICK ON DOOR BUMPER F146073835253 7 MM

STICK ON DOOR BUMPER F146073836256 10 MM

DOOR BUMPER DRILL IN 630.000.03.0850 5 MM

CLEAR

CLEAR

CLEAR

GAS SPRING 80 N - WOOD DOOR MZ3212 300 MM

GAS SPRING 80 N - ALUMINIUM DOOR MZ6146 300 MM

GREY

GREY

OMNI ACCESSORIES

FLAP DOWN STAY MZ31325 288 MM CHROME




- 41 -

SHELF SUPPORT CLEAR

SHELF SUPPORT WHITE

SHELF SUPPORT NICKEL

SHELF SUPPORT GLASS

517.006.00.0051

517.006.61.0051

517.206.61.0015

517.206.65.0015

DESCRIPTION

SHELF SUPPORT GLASS

SHELF SUPPORT NICKEL

CODE

10208020YA

10208030YA

DESCRIPTION CODE

SHELF SUPPORT PIN 517.006.01.0015


CAMFIX METAL

CAMFIX PLASTIC

CAMFIX PLASTIC

T3201

T3201B

T3201W

20 Ø X 13

20 Ø X 13

20 Ø X 13

NICKLE

BROWN

WHITE

DESCRIPTION CODE SIZE FINISHWEDGEFIX

WEDGEFIX

T3241

T3241B

20 Ø X 12

20 Ø X 12

WHITE

BROWN

DESCRIPTION CODE SIZE FINISHDOWEL 5 MM EURO

DOWEL 5 MM EURO SHORT

T3400

T3410

6.3 Ø X 11

6.3 Ø X 7.5

ZINC

ZINC

DESCRIPTION CODE SIZE FINISHDOWEL M4 T3470.009 M4 X 7.5 ZINC

DESCRIPTION CODE SIZE FINISHSLEEVE T3051 5 Ø X M4 X 15 RAW

DESCRIPTION CODE SIZE FINISHCAM FITTING 15 MM T3150 15 Ø X 12 ZINC

OMNI KNOCK DOWN FITTINGS

- 42 -

OMNI KNOCK DOWN FITTINGS

EURO SCREW COUNTERSUNK

EURO SCREW COUNTERSUNK

EURO SCREW PAN HEAD

EURO SCREW COUNTERSUNK FOR GRASS PRODUCTS

707.360.61.1015

707.360.61.3015

707.362.61.3015

F145083544599

6 X 10

6 X 13

6 X 13

6 X 11.5

NICKEL

NICKEL

NICKEL

NICKEL

DESCRIPTION CODE SIZE FINISHDOWEL STEEL 5 MM - EURO THREAD T3402 5 Ø X 34 RAW

DESCRIPTION CODE SIZE FINISHDOWEL STEEL M6 RAW

DOWEL STEEL M4

T3462

T3470

M6 X 34

M4 X 34 RAW


QUICKFIT BOLT 8 X 34 MM EXPANDING DOWEL T3491 8 Ø X 34 ZINC

DESCRIPTION CODE SIZE FINISHINSERT PLASTIC 10 MM X M6

INSERT PLASTIC 8 MM X M6

T3800

T3820

10 Ø X 13 X M6

8 Ø X 13 X M6

WHITE

WHITE



CONNECTING SCREW 5 MM 499.040.27.0025 32 X 5 NICKLE

- 43 -

Since the end of 2010, the GRASS group hasbeen certified to the international environmentmanagement standard DIN ISO 14001.

Environmental protection in practice is an importantprerequisite for sustainable company success.This means using resources carefully and creatingecologically sound production conditions.

We therefore aim to avoid environmental pollution atsource. This applies to the entire product cycle – fromthe initial idea to production, service life and through todisposal.

ENVIRONMENTAL PROTECTION

VIONARO DRAWER SYSTEMwww.grass.co.za www.vionaro.com

-(RSA

) –G

rass

Adv

ertis

ing

All e

rror

s an

d om

issi

ons

exce

pted

201

7

www.grass.co.za

Grass ZA (Pty) Ltd.2 Graph AvenueMontague Gardens 7441Cape Town, South AfricaPhone +27 21 529 8040Fax +27 21 529 8041E-mail [email protected]

Grass ZA (Pty) Ltd.8 Vervoer StreetKya SandJohannesburg 2163South AfricaPhone +27 11 801 9500

Documents

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES · omni slide-on hinge 19 omni slide systems 20 cutlery inserts 21 organising systems 22 - 23 handle profiles 25 - 27 rubber matting 24 sige