of 2 /2

MPEG-2 HDTV / SDTV Multi-Channel Encoder MPC1010 MPEG-2 Multi-Channel Encoder Maximum 12 Channel Encoding by Cascade Connection Simultaneous 12 channel distribution, ＊ 3D or 4K2K contribution The best solutions for terrestrial, CATV, IPTV, and satellite distribution MPEG-2 HDTV / SDTV Multi-Channel Encoder MPC1010 4CH Encoder with TS-MUX 4CH Encoder with TS-MUX Application □ Perfectly synchronized multi-channel encoding □ Maximum 4 channel encoder / unit with TS-MUX □ Supports MPEG-2 HDTV / SDTV □ Multiple video format compatibility including 1080i, 720p, 480i □ Dolby Digital (AC-3) stereo encoding □ 4 channel audio input per video channel (optional) □ Wide variety I / O interface □ Built-In Static PSIP HDx1 SDx3 Dynamic PSIP Generator modulator Encoder Video Switcher Encoder Encoder Encoder MPC1010 TS-MUX STB Program Guide Station Home ＊by cascade connection (optional)

MPEG-2 HDTV/SDTV Multi-Channel Encoder MPC1010

Download PDF Report

Author
others
View
0
Download
0

Embed Size (px)

Text of MPEG-2 HDTV/SDTV Multi-Channel Encoder MPC1010

MPEG-2 HDTV/SDTV Multi-Channel Encoder MPC1010MPEG-2 Multi-Channel Encoder Maximum 12 Channel Encoding by Cascade Connection Simultaneous 12 channel distribution, 3D or 4K2K contribution The best solutions for terrestrial, CATV, IPTV, and satellite distribution
MPEG-2 HDTV/SDTV Multi-Channel Encoder
Application
including 1080i, 720p, 480i
Dolby Digital (AC-3) stereo encoding 4 channel audio input per video channel
(optional) Wide variety I /O interface Built-In Static PSIP
HDx1
SDx3
Rear Panel Photo: MPC1010 4 channel system
Reserved CVBS Reserved SDI-IN SDI-OUT ASI /SMPTE310M OUTPUT
AUDIO1 AUDIO2 SYNC-IN Reserved ASI /SMPTE310M INPUT
ASI /SMPTE310M OUTPUT1 ASI /SMPTE310M OUTPUT2 FAN SW ALARM
6
6
7
8
9
10
11
Reserved LAN1 (10 /100BASE-TX) LAN2 (100 /1000BASE-T)
Caution
Features and specifications are subject to change without prior notice. When exporting our products or technologies, please comply with the Foreign Exchange and Foreign Trade Law. Dolby is a trademark of Dolby Laboratories.
In order to ensure correct and safe use, please be sure to read the User’s Guide beforehand. Do not install in locations exposed to water, humidity, steam, dust, or mist. Doing so could cause fire, electric shock, or equipment failure.
Specifications Specifications
1-4 (Please Specify at the time of order placement) Features
Input Format Encoding Format
Input Format
VBI
System
Control
Body
SDTV: Analog (NTSC/PAL), SD-SDI (SMPTE 259M) HDTV: HD-SDI (SMPTE 292M) (optional) MPEG-2 [email protected], [email protected], [email protected] 1080i, 720p, 480i 1080i: 29.97 /25 (SMPTE 274M), 720p: 59.94 /50 (SMPTE 296M), 480i: 29.97 (SMPTE 125M), 576i: 25 (ITU-R BT.656-4) Analog: up to 4 stereo pairs Digital: Embedded Audio, AES /EBU Dolby Digital (optional), MPEG-1 Audio Layer II Available (-20dB - +20dB) Closed Caption MPEG-2 TS: ATSC Compliant TS is available Internal Static PSIP Generator, External Dynamic PSIP Generator Interface (DVB-ASI /SMPTE 310M) TS-MUX Out: DVB-ASI /SMPTE310M, 100 /1000BASE-T (Slot Out: DVB-ASI /SMPTE 310M) External Black Burst or Tri-SYNC Video: Color Bar Audio: 1kHz Sine Wave Power ON/OFF, Front Control Key SNMP, Web GUI 2U 19" Full-rack size (W432 x D452 x H87.7mm) Approx. 14kg (at full module installed) AC 100 - 240V, 50Hz / 60Hz Maximum 12 channel encoding by cascade connection of 3 MPC1010 units (External Black Burst or Tri-SYNC signal is required)
30-D/D12-04-02