4
www.resemin.com MUKI LHBP Production long hole rig for small section MUKI LHBP is an electro-hydraulic rig for long hole drilling, it has an hydraulic boom, 3AP model, with parallel holding. Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW). Full 360°, horizontal coverage with parallel holding is 2.45 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm. Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling. Applications: • Sub Level Caving, benching • Sub Level Stoping • VCR and cable bolting

MUKI LHBP · 2016. 7. 7. · MUKI LHBP Production long hole rig for small section MUKI LHBP is an electro-hydraulic rig for long hole drilling, it has an hydraulic boom, 3AP model,

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

  • www.resemin.com

    MUKI LHBPProduction long hole rig for small section

    MUKI LHBP is an electro-hydraulic rig for long hole drilling, it has an hydraulic boom, 3AP model, with parallel holding.

    Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW).

    Full 360°, horizontal coverage with parallel holding is 2.45 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm.

    Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.

    Applications:

    • Sub Level Caving, benching• Sub Level Stoping• VCR and cable bolting

  • www.resemin.com

    Muki LHBP Technical specifications

    SPECIFICATIONS

    DRIFTER• Model• Percussion Power• Percussion pressure• Frequency Percussion• Rotation speed• Rotation Torque• Hole diameter• Lub air consumption• Lub oil consumption• Water consumption• Shank Adapter• Weight• Length with shank

    Montabert HC5013 kW

    130 Bar62 Hz

    0 - 195 rpm415 Nm

    33 - 64 mm83.3 l/s (to 2.5 bar)

    0.8 cc/min25 l/min (to 8 bar)

    R32 Female102 kg

    855 mm

    FEED• Model• Advance drilling• Feed extension• Hydraulic clamp• Standard Feed• Options• Two Stinger to stabilize while

    drilling• Digital inclinometer for measuring

    angles

    CARRIER• Model• Diesel Engine• Power• Exhaust catalyst• Transmission• Hydrostactic pump• Positioning pump• Rear axle Oscillating• Service brakes• Emergency and parking brakes

    • Tyres• Steering (articulated carrier)• Hydraulic jacks • Battery• Electric system• Gradeability • Canopy• Tramming lights

    • Centralized Lubrication System• Drilling Lubrication System• Automatic fire suppression

    system• Fire extinguisher• High-pressure washing system• Reel grease gun

    C22.1

    Deutz BF4L201155,1 kW @ 2300 rpm

    StandardHydrostatic

    Poclain, MSE 08Rexroth

    ± 8°Separate

    SAHR (Spring Applied Hydraulic Release)

    7.50 x R15±38°

    2 extendable front2x12 V, 90 Ah

    24 VDC15%

    FOPS / ROPS8X, LED N44, 50W,

    6700 lm, 24 VSKFSKF

    ANSUL, 6 nozzles 1x5 lb, Type ABC

    RE 2500 Series

    Hydraulic motor and chain400 mmBull 1214 ft rods

    3, 5 ft rods

    Transtronic

    HC 50 MONTABERT DRIFTER

    STINGER (1)

    STINGER (2)

    DEUTZ ENGINE BF4L2011

    BOOM 3AP-R

    HYDRAULIC CLAMP

    TYRES 7.50 X R15

  • www.resemin.com

    Muki LHBP Technical specifications

    BOOM• Model• Automatic parallelism• Boom Extension• Angle lift• Swing angle• Rotation angle• Hydraulic cylinders

    Boom 3 AP - R

    700 mm+65°/ -20°

    ± 30°360°

    Parker

    HYDRAULIC CONTROL SYSTEM• Direct Control Valve• Percussion pump (compensated

    pressure)• Rotation Pump • Work pressure• Hydraulic oil tank• Hydraulic return filter• Hydraulic high filter • Saturation hydraulic filter

    indicator • Indicator of low oil• Indicator temperature oil

    WATER AND AIR SYSTEM• Compressor• Maximum capacity• Work pressure• Water pump with hydraulic

    motor• Maximum flow at 8 Bar• Minimum inlet pressure• Cooler Thermal Transfer

    AC - LE3 3-10 UV5.1 l/s (10.8 cfm)

    3 Bar

    Grundfoss, CR5 - 96.9 m3/h

    2 BarEK 1018T, 80 GPM, 34 Bar

    Parker K18

    Rexroth A10V071Parker, P315 A

    180 bar130 l

    Parker, 10µParker, 20µ

    ParkerHydacHydac

    ELECTRIC SYSTEM• Electric motor• Voltage• Frecuency• Starting method• Option to 1000 VAC• Overload protection and

    ground fault• Percussion hour meter• Phase sequence indicator• Battery charger• Electric transformer• Work Lights• Electric wire reel• Electric wire• Protection degree

    ABB - 55kW (75 HP)

    380 - 440 - 550 - 690 -1000 VAC50 - 60 Hz

    Star - DeltaDirect start

    Schneider, Module VIGIIn the control panel

    Siemens32 VAC, 300W, 13A

    1.5 kVA2X, LED N44, 50W, 6700 lm, 24 V

    60 mGGC - 3X2 - AWG (35 mm)

    IP 55

    BARICENTER SYSTEM• Shorter times for Boom positioning since both drilling and

    rotation axis are syncronized.• Enables to use only two Trasducers for Digital Inclinometer

    instead of five from competitors.• Speeds up the operation and productivity of the machine.

  • www.resemin.com

    Muki LHBP Technical specifications

    DIMENSIONS

    Rev

    . 160

    606

    ©

    Cop

    yrig

    ht 2

    016

    RE

    SE

    MIN

    . Spe

    cific

    atio

    ns a

    nd e

    quip

    men

    t are

    sub

    ject

    to c

    hang

    e w

    ithou

    t fur

    ther

    not

    ice.

    Total Weight 7,380 Kg.

    COVERAGE AREA TURN RADIO