Embed Size (px)
DESCRIPTION
Citation preview
Presenza dei Catari sul GardaMaria Cristina Piras
Festa della Fioritura 30 Aprile 2011
Salò
Multipress is an Italian company which produces and sells everywhere in the world C. I. flexo printing machines and auxiliary equipment. We are based in Ponte San Marco (BS), 100 KMs east of Milan.
Multipress sold more than 100 machines in England, In Denmark, in South America, in Australia, in Russia and in several other countries.
Our main machines are two:
1.MAXIFLEX.
2.MASTERFLEX.
MAXIFLEX MAXIFLEX
MAXIFLEXC. I. flexo printing press, designed for quick job change, High tech level, 4 / 6 / 8 colours, width from 620 up to 820 mm
Standard ConfigurationUNWINDER Max roll diameter 1000 mm. Unwind with electronic brake servo cooled Two load cells for reading the web tension Electronic tension control with set point on display Unwind with two way direction Material tension range, from min 2.5 kg a 20 kg. Max. Housing for expanding shaft with auto lock system Expanding shaft of 3” or 6”
PRINTING DECK Cliché sleeve change on machine, without removing the mandrel Print repeat sizes from 250 to 610 mm Gear pitch 5 mm Anilox sleeve change on machine, without removing the mandrel Closed chambered doctor blade with pneumatic adjustable movement Axial and Up-Down electronic registers
Automatic movements of anilox and cliché with pre-setting Horizontal and sequential release of anilox and cliché Print positions saved and reloaded Movements on ball system with warm screws Inter-colours drying box with double chamber
CENTRAL IMPRESSION
Chromed central impression with double chamber Dynamically balanced Designed for connection with chiller Gear with helical teeth with 5 mm pitch Contact touch roll with pneumatic movement Brushless servo motor with encoder and brake
TUNNEL BRIDGE
Dryer air boxes with blowing system 3 Blower fans with automatic speed according to the machine speed Air heating system with electrical haters Air temperature settable from the pc panel Motorized chill roll with settable tension from the pc panel
MASTERFLEX MASTERFLEX
MASTERFLEX
C. I. flexo printing press, designed for quick job change, High tech level, 4 / 6 / 8 colours, width from 620 up to 820 mm
Standard Configuration
STANDARD UNWINDER PRINTING COLOUR DECK CENTRAL IMPRESSION TUNNEL BRIDGE REWIDER MAIN PC PANEL REMOTE CONTROL PANEL STANDARD MACHINE INCLUDES STANDARD MACHINE PERFORMANCES MAIN COMPONENTS ORIGIN OPTIONALS
STANDARD UNWINDER
Max roll diameter 1000 mm. Unwind with electronic brake servo cooled Two load cells for reading the web tension Electronic tension control with set point on display Unwind with two way direction Material tension range, from min 2.5 kg a 25 kg. Max. Housing for expanding shaft with auto lock system Expanding shaft of 3”
PRINTING COLOUR DECK
Cliché sleeve change on machine, without removing the air shaft Print repeat sizes from 340 to 750 mm for 8/10 colours version. Print repeat sizes from 400 to 1000 mm for 4/6 colours version. Gear pitch 5 mm Anilox sleeve change on machine, without removing the air shaft Closed chambered doctor blade with pneumatic adjustable movement
.
Axial and Up-Down electronic registers Automatic movements of anilox and cliché with pre-setting Horizontal and sequential release of anilox and cliché Print positions saved and reloaded Movements on ball system with warm ball screws Inter-colours hot drying box with double chamber
CENTRAL IMPRESSION
200μm chromed central impression Dynamically balanced Double chamber for connection with chiller Gear with helical teeth with 5 mm pitch Contact touch roll with pneumatic movement Servo motor with encoder and cooling servo fan
MULTIPRESS
Strada Statale 11, 12625010 Ponte San MarcoCalcinato (BS), ITALY
Tel. + 39 030-998.03.88Fax + 39 030-996.96.86
E-MAIL [email protected]
MULTIPRESS
Strada Statale 11, 12625010 Ponte San MarcoCalcinato (BS), ITALY
Tel. + 39 030-998.03.88Fax + 39 030-996.96.86
E-MAIL [email protected]
