MultiPurpose Sampler MPS - GERSTEL ® ultiPurpose ampler, PS 3 Part o. sUPPLES GERSTEL® MultiPurpose Sampler MPS Versatile autosampler and sample preparation robot for GC/MS, LC/MS,

MultiPurpose Sampler MPS

New Version with GERSTEL TriStar syringes

and conversion table

2

Part No.

sUPPLIES GERSTEL® MultiPurpose Sampler, MPS

GERSTEL® MultiPurpose Sampler, MPS

3

Part No.

sUPPLIES

GERSTEL® MultiPurpose Sampler MPS

Versatile autosampler and sample preparation robot for GC/MS, LC/MS, and standalone WorkStation operation.

Modern laboratory processes frequently offer significant potential for improvement in the fields of sample prepa-ration and sample introduction. Improving productivity and performance while cutting per sample cost is realis-tic provided you have chosen an autosampler that rises to the task and can be adapted to meet new challenges as demands change. The GERSTEL MultiPurpose Sampler MPS enables highly efficient automation of sample preparation and sample introduction for GC/MS and LC/MS. Or you can use the MPS as WorkStation independent of the analysis system(s), providing prepared samples for multiple techniques in the lab. Whichever MPS you choose, you are sure to get reliable results and increased throughput combined with the flexibility to adapt effortlessly to changes and new challenges.

This Supplies catalogue provides a list of certified consumables, accessories and spare parts essential for the smooth operation of your GERSTEL® MPS. You have the right to demand the highest quality performance from GERSTEL systems and we have compiled this list so that this performance can be maintained throughout the life of your system. Please use only consumables, accessories and spare parts provided by GERSTEL. All GERSTEL products are made to exact specifications. Use of products not approved by GERSTEL can cause system malfunction or damage and may void system warranty.If you have any questions please do not hesitate to contact GERSTEL. Typically, the most efficient way is to contact your local sales representative.

Content

Syringe kits and Syringe holders 4

Syringes 6 GERSTEL TriStar syringes 6 Microliter syringes 7 GERSTEL TriStar HS syringes 8 Microliter syringes for LC & LC/MS 10 Syringe kits for LC/MS 10 GERSTEL TriStar syringes for SPE/DPX 11 Dilutor syringes 11 Sideport syringes 11

Vials and Caps 12 Crimp Cap vials 12 - 13 Crimp Caps 12 - 13 Screw neck vials 14 - 15 Screw caps 14 - 15

SPME fibers 16 SPME fiber holder 16 SPME fiber kits 16 SPME Stableflex fiber kits 17 SPME metal fiber kits 17 MFX SPME Stableflex fiber kits 18 MFX SPME metal fiber kits 18 - 19

Sample loops 20 - 21

Conversion table for syringes/plungers/needles 22

4

Part No.


GERSTEL Syringe kit 10 µL with Universal Syringe Holder consisting of: GERSTEL universal syringe holder; plunger holder; 2 syringes 10 µL

volume units Part No.

µL

10 1 093632-000-00

25 1 093632-001-00

100 1 093632-002-00

250 1 093632-003-00

500 1 093632-004-00

1000 1 093632-005-00

2500 1 093632-012-00

5000 1 093632-013-00

CTC Syringe Holders

GERSTEL Headspace Syringe kit consisting of: GERSTEL universal headspace syringe holder; plunger holder; 2 syringes volume units Part No.

mL

1.0 1 010055-010-00

2.5 1 010055-025-00

volume units Part No.

µL

10 1 010054-000-00


5

Part No.

sUPPLIES

1 µL

5 µL

10 µL

25 µL

50 µL

100 µL

250 µL

500 µL

Yellow

Syringe volumeColor

Lime

Dark Orange

Green

Purple

Aqua

Grey

Dark Orange

1 mL

5 mL

2.5 mL

GERSTEL TriStar SyringesAutosampler Syringes for the MPS

You need an excellent autosampler syringe in order to perform complex sample preparation methods and reliably inject large series of samples to a chromatography system. Lowest possible sample to sample carry-over and highest accuracy are required. Modern mass spectrometers detect every trace contamination placing high demands on rinsing, solvent quality and syringe quality. GERSTEL TriStar Syringes are designed and produced to meet these demands. The rugged and inert materials used provide resilience to solvents, expanded temperature range and long life expectancy. The number of cycles that can be performed with TriStar syringes has been expanded by a factor of up to ten compared with standard syringes.

The TriStar syringe series offers several improvements to minimize or eliminate sources for carry-over, such as reduced residual volumes and active sites inside the syringe.

The sample is kept clean and uncontaminated, and the needle remains solidly mounted without the risk of solvent attacking the glue. GERSTEL TriStar Syringes for the GERSTEL MPS are available in all standard sizes.

Benefits of the GERSTEL TriStar Syringes

Color coded

lEasy selection of the correct syringe volume through clear and unambiguous color coding lReliable analysis, the risk of incorrect syringe selection is minimized

Inert, rugged material

lReliable analysis performance with solvent-resistant surfaces lExtended temperature range for increased ruggedness and application range lLong life span with reliable operation

Optimized assembly

lCarry-over minimized through reduced residual volumes in the plunger assembly, improved surfaces and PTFE surface sealing lCarry over and contamination reduced through improved syringe-to-needle connection, eliminating cavities and contact with glue. lActive plunger tip provides improved Headspace syringe sealing and reduced temperature equilibration times resulting in improved flexibility and productivity

Compatibility:

lPrevious versions plungers and needles can be used for TriStar syringes, but it is not recommended to use TriStar plungers and needles for previous version syringes.

1 µL

100

0 µ

L

MA

DE

IN A

US

TRA

LIA

MA

DE

IN A

US

TRA

LIA

6

Part No.


GERSTEL TriStar syringes for GC & GC/MS for liquid injection

The listed syringes all have 23 Gauge needles (OD = 0.63 mm) and are compatible with the GERSTEL®

Septumless Head (SLH). Needles have conical tips (type C or AS).

with replaceable needle volume gastight needle unit Part No.

µL OD/ID/L/Tip [mm]

5 0.63/0.11/51.5/C 1 022000-001-00

10 l 0.63/0.11/51.6/C 1 022000-053-00

100 l 0.63/0.24/52.0/C 1 022000-200-00

250 l 0.63/0.24/52.0/C 1 022000-250-00

500 l 0.63/0.24/52.0/C 1 022000-251-00

1000 l 0.63/0.32/53.5/C 1 022000-300-00

replacement plunger*

10 l 1 022000-401-00

100 l 1 022000-550-00

250 l 1 022000-600-00

500 l 1 022000-601-00

1000 l 1 022000-650-00

replacement needle*

5 0.63/0.11/51.5/C 2 022000-800-00

10 0.63/0.11/51.6/C 2 022000-801-00

10 (On Column) 0.47/0.11/51.5/C 2 022000-802-00

100-500 0.63/0.24/52.0/C 2 022000-805-00

100-500 0.72/0.37/51.0/LC 5 009970-069-00

1000 0.63/0.32/53.5/C 2 022000-806-00

1000 0.72/0.37/53.5/LC 2 022000-807-00

For GERSTEL Universal syringe holder (013822-000-00). For use with ALEX/TDU/DHS Gripper (Not for SPE/DPX gripper)

with fixed needle volume gastight needle unit Part No.


needle in needle 1.2 0.5/.../.../26P 1 093611-010-00

5 0.63/0.11/52.2/C 1 022000-000-00

10 0.47/0.11/52.2/C 1 022000-052-00

10 0.63/0.11/52.2/C 1 022000-050-00

10 l 0.63/0.11/52.2/C 1 022000-051-00


for syringe 022000-051-00 10 l 1 022000-400-00

*Replacement plungers and -needles for TriStar and previous syringe versions are compatible, see conversion table on page 22


7

Part No.

sUPPLIES

Microliter syringes for GC & GC/MS for liquid injection

volume gastight needle unit Part No.


with fixed needle 5 0.63/.../50.0/C 1 022003-000-00

with fixed needle 10 0.63/.../50.0/C 1 022003-050-00

with fixed needle 25 l 0.63/.../50.0/C 1 009970-004-00

with replaceable needle 100 l 0.63/0.15/50.0/C 1 009970-005-00


replacement needle*

100-250 0.63/0.15/50.0/C 2 022003-800-00

Syringes for 10µL CTC Syringe Holder (093632-000-00) for GC and GC/MS. Syringe holder type detection must be deactivated during operation. Not compatible with TDU/ALEX or SPE/DPX gripper.


µL Gauge/Type

needle in needle 1.2 26-AS 1 093611-010-00

with fixed needle 5 26P-AS 1 093611-011-00

with fixed needle 10 26S-AS 1 093611-012-00

with fixed needle 10 l 26S-AS 1 093611-063-00

with fixed needle 10 26S-2 1 093611-013-00

with fixed needle 10 23S-AS 1 093611-068-00

with fixed needle 25 l 26P-AS 1 093611-014-00

with fixed needle 100 l 26S-AS 1 093611-015-00

with fixed needle 250 l 26P-AS 1 093611-016-00

CTC Syringe Holders for GC and GC/MS. Syringes for use only with dedicated syringe holders, specific to the syringe size.


8

Part No.


GERSTEL TriStar HS syringes for Headspace injection up to 100°C


mL OD/ID/L/Tip [mm]

with replaceable needle 1 l 0.63/0.15/57.0/HS 1 022001-301-00

with replaceable needle 2.5 l 0.63/0.15/57.0/HS 1 022001-327-00


1 l 1 022002-651-00

2.5 l 1 022002-702-00

replacement needle*

1 - 2.5 0.63/0.15/57.0/HS 2 022001-802-00

1 - 2.5 0.63/0.32/57.0/HS 2 022001-803-00


mL OD/ID/L/Tip [mm]

with replaceable needle 1 l 0.63/0.15/57.0/HS 1 022001-300-00

with replaceable needle 2.5 l 0.63/0.15/57.0/HS 1 022001-327-00


1 l 1 022002-650-00

2.5 l 1 022002-702-00

replacement needle*

1 0.63/0.15/57.0/HS 2 022001-802-00

2.5 0.63/0.32/57.0/HS 2 022001-803-00

GERSTEL TriStar HS syringes for Headspace injection up to 150°C



9

Part No.

sUPPLIES



with fixed needle 10 0.63/0.11/59.1/C 1 022001-050-00


10 0.63/0.11/53.1/C 1 022001-052-00

replacement needle*

10 0.63/0.11/53.1/C 2 022001-800-00



with replaceable needle 100 l 1 022000-200-00

with replaceable needle 250 l 1 022000-250-00


100 l 1 022000-550-00

250 l 1 022000-600-00

replacement needle*

100-500 0.63/0.24/57.0/C 2 022001-801-00

GERSTEL TriStar (heated operation) syringes for use with HS syringe holder and adapter 010711-000-00

Please note: Before use with

the heated syringe holder

the standard needle must

be replaced with needle

022001-801-00


10

Part No.


Microliter syringes for LC & LC/MSThe needle types 22 and 22S have the same outer diameter: 0.72 mm OD and a straight needle tip (Type LC or 3). Type 22 and 22S differ only by their internal diameter ( 0.41 mm and 0.15 mm ID respectively); Due to the larger ID, a type 22 needle enables faster syringe filling: Up to 200 µL/sec for type 22 as opposed to 10 – 20 µL/sec for the 22S.

volume Type needle unit Part No.

µL gauge

10 C 22S 1 093711-014-00

25 C 22S 1 093711-001-00

25 X 22S 1 093711-042-00

50 X 22S 1 093711-053-00

100 C 22S 1 093711-002-00

100 C 22 1 093711-028-00

100 X 22S 1 093711-043-00

100 X 22 1 093711-044-00

250 C 22 1 093711-003-00

500 C 22 1 093711-027-00

1000 C 22 1 093711-004-00

2500 C 22 1 093711-005-00

5000 C 22 1 093711-006-00

5000 19 1 093731-113-00

replacement plunger

10 C 10 093611-026-00

25 C 10 093611-020-00

25 X 3 093711-048-00

50 X 3 093711-054-00

100 C 10 093611-021-00

100 X 3 093711-049-00

250 C 10 093611-022-00

500 C 10 093711-026-00

1000 C 1 093711-019-00

2500 C 1 093711-020-00

5000 C 1 093711-021-00

volume Type needle unit Part no.

µL gauge

10 C 22S 1 093711-007-00

25 C 22S 1 093711-008-00

25 X 22S 1 093711-045-00

50 X 22S 1 093711-051-00

100 C 22S 1 093711-009-00

100 X 22S 1 093711-046-00

100 X 22 1 093711-052-00

250 C 22 1 093711-010-00

500 C 22 1 093711-047-00

1000 C 22 1 093711-011-00

2500 C 22 1 093711-012-00

5000 C 22 1 093711-013-00

Syringe kits for LC & LC/MSwith syringe detect, consisting of: plunger holder, syringe adapter and 2 syringes


11

Part No.

sUPPLIES

volume unit Part No.

Syringe 1 mL 1 093631-091-00 2.5 mL 1 093631-092-00 5 mL 1 093631-093-00 10 mL 1 093631-094-00

replacement plunger 1 mL 1 093632-038-00 2.5 mL 1 093632-039-00 5 mL 1 093632-040-00 10 mL 1 093632-041-00

PTFE ferrule 1 093632-045-00

MPS dilutor syringes

MPS sideport syringes without needleFor use with MPS sideport syringe adapter (not compatible with GERSTEL® Universal Syringe holder)

GERSTEL TriStar syringes for SPE/DPXfor use with GERSTEL Solid Phase Extraction (SPE) and GERSTEL Disposable Pipette Extraction (DPX)



with replaceable needle 1000 l without needle 1 022002-300-00




1000 l 1 022002-650-00

2500 l 1 022002-700-00

5000 l 1 009970-066-00

replacement needle*

1000-2500 0.63/0.36/57.0/C 2 022002-800-00

1000-2500 0.72/0.37/57.0/LC 2 022002-801-00

5000 0.72/0.37/56.0/LC 2 022002-804-00

1000-2500 0.63/0.36/60.0/C 2 022002-802-00

1000-2500 0.72/0.37/60.0/LC 2 022002-803-00

5000 0.72/0.37/60.0/LC 2 022002-805-00

5000 0.63/0.32/56.0/HS 2 022002-806-00


µL Gauge/Type

for replaceable needle 20 l without needle 1 093631-096-00

for replaceable needle 80 l without needle 1 093631-095-00

replacement plunger

20 l 10 093611-034-00

80 l 10 093611-027-00

replacement needle

20 22 s/PS3 3 093711-023-00

20 26/AS 3 093611-029-00

80 22/PS3 3 093711-022-00

80 26/AS 3 093611-028-00


12

Part No.


Crimp cap vials

Crimp caps with septum for vialsIf vials need to be reopened and emptied after analysis, magnetic vial caps with aluminum edges (Bi-metal) offer the best solution. The softer edges allow easy crimping and decrimping using a hand-crimper. If steel caps are used, it is recommended to use a bench-top crimper.

Sample vials and caps

Type mL Seal size (mm) unit Part no.

clear 0.7 8 100 093640-052-00 clear 1.5 11 100 093640-004-00 clear 2.5 11 100 093640-074-00 clear 10 20 100 093640-005-00 clear 10 20 1000 093640-069-00 clear 20 20 100 093640-006-00 clear 20 20 1000 093640-068-00 clear 25 20 100 093640-073-00 clear 100 20 88 093640-062-00 Solvent bottle, includes cap & septum 100 20 1 093631-054-00

Type for Seal size unit Part no. (mm)

Aluminum Septum: Silicone white/PTFE red, 8 100 093640-053-00

Magnetic, golden Septum: Silicone red/PTFE red, 11 100 093640-007-00

Aluminum Septum: natural rubber red-orange/ PTFE Transparent, 60° shore A, 11 100 093640-089-00

Aluminum Septum: Silicone blue/PTFE white, 45° shore A, 11 100 093640-090-00

Magnetic, golden, 20 100 093640-008-00 Septum: Silicone blue, PTFE white 20 1000 093640-015-00

Magnetic, golden, Pharma-Fix-Septum: Butyl /PTFE white, 20 100 093640-070-00

Bi-Metal, Magnetic, red, Septum: Silicone blue, PTFE white, 20 100 093640-063-00

Aluminum, Septum: Silicone blue/PTFE white, 35° Shore A, 20 100 093640-067-00

Aluminum, Septum: Silicone white, PTFE beige, 35° Shore A, 20 100 011912-002-00

PE Cap, transparent Septum: Silicone blue/PTFE white 45° Shore A, 20 10 093640-097-00

1

2

3

4

5

6

7

1

2

3

4

5

6

7

8

9

10

1

2

3

4

5

6

7

1

2

3

4

5

6

7

8

9

10


13

Part No.

sUPPLIES

Crimp caps for SPMEMagnetic, golden, with septum

For SPME applications, crimp caps of steel with silicone septa are recommended. If the sample is analyzed for silicone, it is recommended to use butyl rubber septa or natural rubber septa. For a leak-free seal, it is recommended to use a bench-top crimper.

Vials for SPME

Vials, inserts, and caps for HSSE Twister inserts

Type for Seal size unit Part no. (mm)

Septum: Silicone white/PTFE blue, 1.5 mm, 60° Shore A, for SPME vial 20 100 093640-030-00

Septum: Silicone creme, PTFE red, 1.5 mm, 55° Shore A, for SPME vial 20 100 093640-031-00

Septum: Natural rubber, red-orange/PTFE, 1.3 mm, 60° Shore A, for SPME vial 20 100 093640-034-00

Septum: Butyl red / PTFE grey, 1.3 mm, 55° Shore A, for SPME vial 20 100 093640-050-00


Clear, with imprint »SPME« with extra thick crimp neck 20 20 100 093640-035-00


Clear, with imprint »Twister«, with extra thick crimp neck 20 20 100 012491-000-00

Insert for Twister Vial 012491-000-00 100 012492-000-00

Aluminium Headspace Crimp cap, Septum: Silicone white/PTFE beige, 3.25mm, 35° shore A 20 100 011912-002-00

1

2

3

4

1

2

3

4

14

Part No.


Screw cap vials Vials mL Thread Ø unit Part no.

Clear, Ø11.6 x 32 mm, for 20 mm Twisters 1.1 9 100 093640-045-00

Clear, Ø11.6 x 32 mm, for 10 mm Twisters 1.5 9 100 093640-046-00

Brown, green screw caps, Septum: PTFE/Silicone/PTFE 1.5 9 100 089355-084-00

Clear, blue screw caps, Septum: rubber red/PTFE 1.5 9 100 089355-085-00

Brown, Ø11.6 x 32 mm, short screw neck 1.5 9 100 093640-095-00

Clear, Ø15 x 45 mm round bottom 4 13 100 093640-113-00

Clear, Ø14.7 x 45 mm 4 13 100 093640-076-00

Clear, 10 18 100 093640-038-00

Brown 10 18 100 093640-039-00

Clear, 20 18 100 093640-036-00

Brown, 20 18 100 093640-037-00

Clear, Ø27.5 x 95 mm 40 24 100 094210-000-00

Microliter inserts for 2 mL screw cap vials, clear 0.1 100 093640-029-00

For 10 mm Twisters: Insert Ø 6 x 31 mm, clear, flat bottom 0.2 100 093640-047-00

Screw caps with septa

Thread Ø unit Part no.

PP transparent, Septum: Silicone blue / PTFE white, 1.3 mm, 45° Shore A 9 100 093640-072-00

PP blue, Septum: Silicone white/PTFE red, 1.0 mm, 55° shore A 9 100 093640-075-00

UltraClean™, magnetic, golden Septum: Silicone white/PTFE red 1.0 mm 9 100 093640-079-00

PP black, Septum: Silicon blue/PTFE white, 1.3 mm 45° shore A 13 100 093640-081-00

PP black, Septum: Natural rubber red-orange/ TEF transparent, 1.3 mm1.3 mm 13 100 093640-077-00

PP black, with magnetized ring Septum: dark blue-transparent/PTFE white, 45° Shore A, 1.3 mm 13 100 093640-103-00

12

3

4

5

6

7

8

9

10

11

12

1314

1

2

3

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1

2

3

4

5

4

5

66


15

Part No.

sUPPLIES

Septum unit Part no

Silicone blue transparent / PTFE white, 1.3 mm, 35° Shore A 100 093640-057-00

Silicone white / PTFE blue, 1.5 mm, 60° Shore A 100 093640-056-00

Butyl red / PTFE grey, 1.6 mm, 55° Shore A 100 093640-058-00

Viton black, 1.0 mm, 75° Shore A 100 093640-059-00

Septa for screw caps for 10/20 mL screw cap vials

Screw caps with septa

Magnetic metal based vial caps enable transport and automation using the GERSTEL MultiPurpose Sampler

Thread Ø unit Part no.

Septum: Silicone blue / PTFE white, 1.3 mm, 45° Shore A 18 100 093640-040-00

Septum: Silicon white / PTFE blue, 1.5 mm, 60° Shore A 18 100 093640-041-00

Septum: Butyl red / PTFE grey, 1.6 mm, 55° Shore A 18 100 093640-042-00

Septum: Viton black, 1.0 mm, 75° Shore A 18 100 093640-043-00

Septum: Natural rubber / TEF; 1.3 mm, 60° Shore A 18 100 093640-100-00

Polypropylene white, non-magnetic Septum: Silicone natural / PTFE beige, 3.2 mm; 45° Shore A, 24 100 094210-003-00

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3

4

1 2

3 4

Filter inserts 17 µm for 10/20 mL screw cap vialswithout vials and screw caps For: 10 mL screw cap vials 093640-038-00 and 20 mL screw cap vials 093640-036-00 with screw cap 093640-040-00

50 units 020006-050-00

1000 units 020006-100-00

5000 units 020006-500-00

16

Part No.


gases and low molecular compounds 75 µm carboxen/polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-009-00

gases and low molecular compounds 85 µm carboxen/polydimethylsiloxane, on StableFlexTM fiber 23 gauge (OD = 0.63 mm) 093639-024-00

volatiles and semivolatiles 85 µm polyacrylate 100 µm polydimethylsiloxane 7 µm polydimethylsiloxane coating 23 gauge (OD = 0.63 mm) 093639-028-00

volatile or polar organics in water 75 µm carboxen/polydimethylsiloxane 65 µm polydimethylsiloxane/divinylbenzene 85 µm polyacrylate 23 gauge (OD = 0.63 mm) 093639-029-00

flavors and odors 100 µm polydimethylsiloxane, 65 µm polydimethylsiloxane/divinylbenzene, 75 µm carboxen/polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-030-00

flavors 50/30 µm divinylbenzene/carboxen/polydimethylsiloxane on StableFlex fiber 23 gauge (OD = 0.63 mm) 093639-026-00 on 2 cm StableFlex fiber 23 gauge (OD = 0.63 mm) 093639-027-00

100 µm polydimethylsiloxane 85 µm carboxen/polydimethylsiloxane 50/30 µm DVB/carboxen/polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-037-00

SPME fiber kits1 package (3 units)

SPME fiber holderDesigned for mounting SPME fibers for automated SPME analysis.

Fibers used for automated SPME analysis have no spring – in contrast to fibers for manual SPME. Consequently, there are separate holders for each fiber type. The fibers listed here are designed exclusively for automated SPME analysis using the MPS. They are not suitable for manual SPME analysis.

For use with the GERSTEL® Cooled Injection System, CIS 23 gauge (OD=0.63 mm) fibers and SPME liner are recommended.

093639-000-00


17

Part No.

sUPPLIES

SPME Stableflex fiber kits23 gauge (OD = 0.63 mm), 4 fibers

50/30 µm Divinylbenzene/Carboxen 65 µm Polydimethylsiloxane/Divinylbenzene 85 µm Carboxen/Polydimethylsiloxane 85 µm Polyacrylat 23 gauge (OD = 0.63 mm) 093639-031-00

volatiles 100 µm polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-001-00

non-polar semivolatiles 30 µm polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-020-00

non-polar high molecular weight compounds 7 µm polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-021-00

volatiles, amines, and nitroaromatic compounds 65 µm polydimethylsiloxane/divinylbenzene, partially crosslinked 23 gauge (OD = 0.63 mm) 093639-005-00

volatiles, amines, and nitroaromatic compounds 65 µm polydimethylsiloxane/divinylbenzene, highly crosslinked on StableFlex fiber 23 gauge (OD = 0.63 mm) 093639-022-00

polar semivolatiles 85 µm polyacrylate, partially crosslinked 23 gauge (OD = 0.63 mm) 093639-023-00

60 µm Carbowax-Polyethylene Glycol on metal fiber 23 gauge (OD = 0.63 mm) 093639-043-00

SPME fiber kitsfor automated SPME using the MPS; 1 package (3 units)

SPME metal fiber kits23 gauge (OD = 0.63 mm), 1 fiber

volatiles 100 µm polydimethylsiloxane, non-bonded 23 gauge (OD = 0.63 mm) 093639-033-00

non-polar semivolatiles 30 µm polydimethylsiloxan, non bonded 23 gauge (OD = 0.63 mm) 093639-034-00

non-polar high molecular weight compounds 7 µm polydimethylsiloxan, bonded 23 gauge (OD = 0.63 mm) 093639-035-00

volatiles, amines, and nitroaromatic compounds 65 µm polydimethylsiloxane/divinylbenzene 23 gauge (OD = 0.63 mm) 093639-038-00

flavors 50/30 µm divinylbenzene/carboxen Polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-040-00 fiber length 2 cm 23 gauge (OD = 0.63 mm) 093639-041-00

18

Part No.


volatiles 100 µm polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-804-00

24 gauge 093639-805-00

non-polar semivolatiles 30 µm polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-811-00

24 gauge 093639-812-00

non-polar high molecular compounds 7 µm polydimethylsiloxane 23 gauge (OD = 0.63 mm) 093639-823-00

24 gauge 093639-824-00

volatiles, amines and nitroaromatic compounds 65 µm polydimethylsiloxane/divinylbenzene on StableFlex fiber 23 gauge (OD = 0.63 mm) 093639-800-00

24 gauge 093639-801-00

flavors 50/30 µm divinylbenzene/carboxen/Polydimethylsiloxane on StableFlex fiber 23 gauge (OD = 0.63 mm) 093639-802-00

24 gauge 093639-803-00

gases and low molecular compounds 85µm carboxen/polydimethylsiloxane on StableFlex fiber 23 gauge (OD = 0.63 mm) 093639-808-00

24 gauge 093639-809-00

polar volatiles 60 µm PEG on StableFlex-Fiber 23 gauge (OD = 0.63 mm) 093639-810-00

MFX-SPME FFA Stableflex Assortment Kit23 gauge (OD = 0.63 mm), 4 fibers

50/30 µm DVB/Carboxen/PDMS coating 65 µm PDMS/DVB coating 85 µm Carboxen/PDMS coating 85 µm polyacrylate coating 23 gauge (OD = 0.63 mm) 093639-825-00

MFX SPME Fast Fit Assembly (SPME-FFA)for SPME MultiFiber Exchange (MFX) with MPS; 1 package (3 units)


19

Part No.

sUPPLIES

MFX SPME FFA Assortment kit 123 gauge (OD = 0.63 mm), 3 fibers

volatiles and semivolatiles; consists of: 85 µm polyacrylate coating 100 µm polydimethylsiloxane coating 7 µm polydimethylsiloxane coating 23 gauge (OD = 0.63 mm) 093639-826-00


volatile or polar organics in water; consists of: 75 µm Carboxen/polydimethylsiloxane coating 65 µm polydimethylsiloxane/divinylbenzene coating 85 µm polyacrylate coating 23 gauge (OD = 0.63 mm) 093639-827-00


flavors and odors; consists of: 100 µm polydimethylsiloxane coating 65 µm polydimethylsiloxane/divinylbenzene coating 75 µm Carboxen/polydimethylsiloxane coating 23 gauge (OD = 0.63 mm) 093639-828-00


flavors and odors; consists of: 100 µm polydimethylsiloxane coating 65 µm polydimethylsiloxane/divinylbenzene coating 85 µm Carboxen/polydimethylsiloxane coating 50/30 µm Divinylbenzene/carboxen/polydimethylsiloxane coating 23 gauge (OD = 0.63 mm) 093639-829-00

20

Part No.


Sample loop

SS Sample loop 1/16“ for Cheminert injection valve

2 µL 093731-154-00

5 µL 093731-224-00

10 µL 093731-153-00

20 µL 093731-034-00

25 µL 093731-243-00

50 µL 093731-033-00

100 µL 093731-032-00

250 µL 093731-031-00

500 µL 093731-030-00

1000 µL 093731-107-00

2000 µL 093731-108-00

5000 µL 093731-109-00

Sulfinert Sample loop 1/16“ for Cheminert injection valve

100 µL 093731-123-00

500 µL 093731-124-00

1000 µL 093731-125-00

PEEK Sample loop 1/16“ for Cheminert PAEK injection valve

2 µL 093731-158-00

3 µL 093731-265-00

5 µL 093731-157-00

10 µL 093731-156-00

20 µL 093731-155-00

50 µL 093731-184-00


21

Part No.

sUPPLIES

SS Sample loop 1/16“ for Valco W-Type injection valve

2 µL 093731-049-00

5 µL 093731-050-00

10 µL 093731-051-00

15 µL 093731-052-00

20 µL 093731-011-00

25 µL 093731-053-00

30 µL 093731-054-00

50 µL 093731-010-00

100 µL 093731-009-00

200 µL 093731-070-00

250 µL 093731-055-00

500 µL 093731-008-00

1000 µL 093731-007-00

SS Sample loop 1/16“ for Rheodyne injection valve

5 µL 093731-129-00

10 µL 093731-130-00

20 µL 093731-131-00

50 µL 093731-132-00

100 µL 093731-133-00

500 µL 093731-248-00

1000 µL 093731-249-00

PEEK Sample loop 1/16“ for Rheodyne injection valve

5 µL 093731-134-00

10 µL 093731-135-00

20 µL 093731-136-00

50 µL 093731-137-00

100 µL 093731-138-00

22

Part No.


old Part no. new Part no. page

009970-001-00 022003-000-00 7

009970-002-00 022003-050-00 7

009970-007-00 022003-800-00 7

009970-015-00 022000-001-00 6

009970-016-00 022000-053-00 6

009970-018-00 022000-200-00 6, 9

009970-019-00 022000-250-00 6, 9

009970-020-00 022000-300-00 6

009970-021-00 022000-000-00 6

009970-022-00 022000-051-00 6

009970-024-00 022000-050-00 6

009970-030-00 022000-400-00 6

009970-031-00 022000-401-00 6

009970-033-00 022000-600-00 6, 9

009970-034-00 022000-650-00 6

009970-040-00 022000-801-00 6

009970-041-00 022000-805-00 6

009970-042-00 022000-806-00 6

009970-043-00 022000-802-00 6

009970-048-00 022000-800-00 6

009970-051-00 022001-052-00 9

009970-052-00 022001-800-00 9

009970-057-00 022001-050-00 9

009970-058-00 022000-052-00 6

old Part no. new Part no. page

009970-061-00 022000-807-00 6

009970-065-00 022002-804-00 11

009970-070-00 022002-805-00 11

009970-072-00 022001-801-00 9

009970-080-00 022001-051-00 9

009980-046-00 022001-802-00 8

009980-052-00 022001-803-00 8

009980-053-00 022002-700-00 11

009980-054-00 022001-300-00 8

009980-055-00 022001-325-00 8

009980-061-00 022002-800-00 11

009980-062-00 022002-801-00 11

009980-063-00 022002-325-00 11

009980-064-00 022002-300-00 11

009980-065-00 022002-650-00 8, 11

009980-066-00 022002-802-00 11

009980-067-00 022002-803-00 11

009980-068-00 022001-327-00 8

009980-069-00 022001-301-00 8

009980-070-00 022002-702-00 8

009980-071-00 022002-651-00 8

009980-081-00 022002-806-00 11

022000-550-00 6, 9

022000-601-00 6

Conversion table for syringes/plungers/needles between previous syringe versions and the new TriStar syringes

Compatibility:

Previous versions plungers and needles can be used for TriStar syringes, but it is not recommended to use TriStar plun-gers and needles for previous version syringes.


23

Part No.

sUPPLIES

GERSTEL Worldwide

GERSTEL GmbH & Co. KGEberhard-Gerstel-Platz 145473 Mülheim an der RuhrGermany +49 (0) 208 - 7 65 03-0 +49 (0) 208 - 7 65 03 33 [email protected] www.gerstel.com

GERSTEL, Inc.701 Digital Drive, Suite J Linthicum, MD 21090USA +1 (410) 247 5885 +1 (410) 247 5887 [email protected] www.gerstelus.com

GERSTEL AGWassergrabe 27CH-6210 SurseeSwitzerland +41 (41) 9 21 97 23 +41 (41) 9 21 97 25 [email protected] www.gerstel.ch

GERSTEL K.K.1-3-1 Nakane, Meguro-kuTokyo 152-0031SMBC Toritsudai Ekimae Bldg 4FJapan +81 3 5731 5321 +81 3 5731 5322 [email protected] www.gerstel.co.jp

GERSTEL LLP10 Science Park Road#02-18 The AlphaSingapore 117684 +65 6779 0933 +65 6779 0938 [email protected] www.gerstel.com

GERSTEL BrasilAv. Pascoal da Rocha Falcão, 36704785-000 São Paulo - SP Brasil +55 (11)5665-8931 +55 (11)5666-9084 [email protected] www.gerstel.com.br

��

�

��

��

��

�

��

��

��

Awarded for the active pursuit of

environmental sustainability

S001

35-7

01-0

2

Agilent is trademark of Agilent Technologies, Inc.; Carbotrap B and Carbotrap C are trademarks of Sigma-Aldrich Biotechnology L.P.; HP is trademark of Hewlett-Packard Development Company, L.P.; Kalrez® and Viton® are trademarks of Dupont Performance Elastomers; Teflon® is trademark of E. I. Du Pont de Nemours & Company; Tenax® TA is trademark of Buchem B.V.

Information, descriptions and specifications in thisPublication are subject to change without notice.

Ver. 2017/28/06

To download the latest version, please go to : www.gerstel.com/en/supplies.htm

GERSTEL, GRAPHPACK and TWISTER are registeredtrademark of GERSTEL GmbH & Co. KG

©Copyright by GERSTEL GmbH & Co.KG

Documents

MultiPurpose Sampler MPS - GERSTEL ® ultiPurpose ampler, PS 3 Part o. sUPPLES GERSTEL® MultiPurpose Sampler MPS Versatile autosampler and sample preparation robot for GC/MS, LC/MS,