1
SPECIMEN COLLECTION Ag Nasopharyngeal Swab Sputum Rinse your mouth with water 1 Breath in and out 3 times 2 Put the swab into the container containing the sputum, turn it several times and soak it sufficiently 4 Give a sputum sample 3 TEST PROCEDURE Open the extraction solution tube. 1 STEP 2 STEP Insert the patient swab sample into the extraction solution tube. Then, swirl swab at least 6 times. Roll the swab head against the inside of the tube as you remove it. Bind the sample developing filter cap with the extraction tube. If there is any blurry line or color change on the T line within 15 minutes, it should be read as positive. Add 3 drops of the extraction solution with specimen into the sample well. After 10 minutes, interpret the test results. 6x Cap open 5~10 Min. Detection 3 STEP 4 STEP 5 STEP 3 drops Positive Positive Result INTERPRETATION OF THE RESULTS Negative Invalid

Nasopharyngeal Swab Sputum

  • Upload
    others

  • View
    17

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Nasopharyngeal Swab Sputum

SPECIMEN COLLECTION

AgNasopharyngeal Swab Sputum

Rinse your mouth with water1 Breath in and out 3 times2

Put the swab into the container containing the sputum, turn it several times and soak it sufficiently

4Give a sputum sample3

TEST PROCEDURE

Open the extractionsolution tube.

1 STEP 2 STEP

Insert the patient swabsample into the

extraction solution tube. Then, swirl swab at least 6 times.

Roll the swab headagainst the inside of

the tube as youremove it.

Bind the sample developing

filter cap with the extraction tube.

If there is any blurry line or color change on the T line within 15 minutes, it should be read as positive.

Add 3 drops of the extraction solution withspecimen into the sample well.

After 10 minutes, interpret the test results.

6xCap open

5~10 Min.Detection

3 STEP 4 STEP 5 STEP

3 dropsPositive

Positive Result

INTERPRETATION OF THE RESULTS

Negative Invalid